[PATCH 5/5] MMC: OMAP: restore original power up/down steps

From: Aaro Koskinen <aaro.koskinen@iki.fi>
To: Tony Lindgren <tony@atomide.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-omap@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Aaro Koskinen <aaro.koskinen@iki.fi>
Subject: [PATCH 5/5] MMC: OMAP: restore original power up/down steps
Date: Fri, 23 Feb 2024 20:14:39 +0200	[thread overview]
Message-ID: <20240223181439.1099750-6-aaro.koskinen@iki.fi> (raw)
In-Reply-To: <20240223181439.1099750-1-aaro.koskinen@iki.fi>

Commit e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
moved Nokia N810 MMC power up/down from the board file into the MMC driver.

The change removed some delays, and ordering without a valid reason.
Restore power up/down to match the original code. This matters only on N810
where the 2nd GPIO is in use. Other boards will see an additional delay but
that should be a lesser concern than omitting delays altogether.

Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 drivers/mmc/host/omap.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 50408771ae01..13fa8588e38c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1119,10 +1119,25 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
 
 	host = slot->host;
 
-	if (slot->vsd)
-		gpiod_set_value(slot->vsd, power_on);
-	if (slot->vio)
-		gpiod_set_value(slot->vio, power_on);
+	if (power_on) {
+		if (slot->vsd) {
+			gpiod_set_value(slot->vsd, power_on);
+			msleep(1);
+		}
+		if (slot->vio) {
+			gpiod_set_value(slot->vio, power_on);
+			msleep(1);
+		}
+	} else {
+		if (slot->vio) {
+			gpiod_set_value(slot->vio, power_on);
+			msleep(50);
+		}
+		if (slot->vsd) {
+			gpiod_set_value(slot->vsd, power_on);
+			msleep(50);
+		}
+	}
 
 	if (slot->pdata->set_power != NULL)
 		slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
-- 
2.39.2

