All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <quic_bjorande@quicinc.com>
To: Johan Hovold <johan@kernel.org>
Cc: Linux regressions mailing list <regressions@lists.linux.dev>,
	LKML <linux-kernel@vger.kernel.org>,
	Vinod Koul <vinod.koul@linaro.org>,
	"Abhinav Kumar" <quic_abhinavk@quicinc.com>
Subject: Re: Lenovo ThinkPad X13s regerssions (was Re: Linux regressions report for mainline [2024-02-25])
Date: Tue, 5 Mar 2024 20:19:47 -0800	[thread overview]
Message-ID: <20240306041947.GG3213752@hu-bjorande-lv.qualcomm.com> (raw)
In-Reply-To: <ZecjcApvdZSGRysT@hovoldconsulting.com>

On Tue, Mar 05, 2024 at 02:51:44PM +0100, Johan Hovold wrote:
> [ +CC: Vinod, Bjorn, Abhinav ]
> 
> On Tue, Mar 05, 2024 at 10:33:39AM +0100, Linux regression tracking (Thorsten Leemhuis) wrote:
> > [dropping Linus from CC, we can add him back later when needed]
> > 
> > On 27.02.24 11:20, Johan Hovold wrote:
> > > On Sun, Feb 25, 2024 at 01:21:46PM +0000, Regzbot (on behalf of Thorsten Leemhuis) wrote:
> > > 
> > >> Johan Hovold also deals with multiple issues affecting Lenovo ThinkPad
> > >> X13s, but he send out patch series to fix some or all of those[1], so
> > >> with a bit of luck those issues will soon be fixed as well.
> > >> https://lore.kernel.org/lkml/ZctVmLK4zTwcpW3A@hovoldconsulting.com/
> > 
> > As 6.8 final might be just five days away, could you please help me out
> > with a short status update wrt. unresolved regressions from your side if
> > you have a minute? It's easy to get lost in all those issues. :-/ :-D
> 
> Heh. Indeed. It's been a rough cycle. :)
> 
> > >> [1]
> > >> https://lore.kernel.org/lkml/20240217150228.5788-1-johan+linaro@kernel.org/
> > > 
> > > This series addresses a use-after-free in the PMIC glink driver caused
> > > by DRM bridge changes in rc1 and which can result in the internal
> > > display not showing up on boot.
> > > 
> > > The DRM/SoC fixes here have now been merged to drm-misc for 6.8.
> > 
> > What about the others from that series? Can they wait till 6.9? Or are
> > they on track for 6.8?
> 
> Vinod, the PHY maintainer, just told me he will try to get them into
> 6.8.
> 
> > > But also with these fixes, there are still a couple of regressions
> > > related to the Qualcomm DRM runtime PM rework in 6.8-rc1. I'll send
> > > separate reports to track those.
> > 
> > Any decision yet if they are going to be reverted for now?
> >
> > Am I right assuming those would fix
> > https://lore.kernel.org/lkml/Zd3kvD02Qvsh2Sid@hovoldconsulting.com/
> > which did not get even a single reply?
> 
> That was the hope, but I've managed to trigger a reset on disconnect
> once also with the runtime PM series reverted.
> 
> One of the patches from that series has already been reverted (to fix
> the VT console hotplug regression) and there is some indication that
> that was sufficient to address the issue with hotplug not being detected
> in X/Wayland too. I'm waiting for confirmation from some users that have
> not been able to use their external displays at all since 6.8-rc1, but
> it does seem to fix the X/Wayland issues I could reproduce here.
> 

I bumped my X13s to v6.8-rc7 earlier today and took it for a spin.

I was successfully able to plug/unplug my main display both in fbcon and
Wayland (sway) a number of times, I was able to boot with external
display connected and have it show up in fbcon and then survive into
sway. I tried suspending (echo mem > /sys/power/state) and got back from
that state a few times without problems.

Mixing connection/disconnection with being in suspended state was less
successful and I was able to crash the machine twice here - but I can't
say this worked before... (As previously we would not have eDP after
suspending with external display).

So, things are looking much better with -rc7, but of course, my test
scope is limited.

Regards,
Bjorn

> But either way, the reset on disconnect is still there, and have since
> been reproduced by Bjorn also on another Qualcomm platform without a
> hypervisor so that we've now got a call stack. I've heard that Abhinav
> is looking into that, but I don't know if there's any chance to have a
> fix ready this week.
> 
> Johan

  parent reply	other threads:[~2024-03-06  4:19 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-25 13:21 Linux regressions report for mainline [2024-02-25] Regzbot (on behalf of Thorsten Leemhuis)
2024-02-25 14:21 ` Linux regression tracking (Thorsten Leemhuis)
2024-02-26 17:33   ` Linus Torvalds
2024-02-27 11:56     ` Thorsten Leemhuis
2024-02-27 10:20 ` Johan Hovold
2024-02-27 12:08   ` Linux regression tracking (Thorsten Leemhuis)
2024-03-05  9:33   ` Lenovo ThinkPad X13s regerssions (was Re: Linux regressions report for mainline [2024-02-25]) Linux regression tracking (Thorsten Leemhuis)
2024-03-05 13:51     ` Johan Hovold
2024-03-05 14:50       ` Linux regression tracking (Thorsten Leemhuis)
2024-03-05 15:08         ` Johan Hovold
2024-03-06  4:19       ` Bjorn Andersson [this message]
2024-03-08 12:55         ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240306041947.GG3213752@hu-bjorande-lv.qualcomm.com \
    --to=quic_bjorande@quicinc.com \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=regressions@lists.linux.dev \
    --cc=vinod.koul@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.