Re: [PATCH v2 0/3] r8a7793 Gose video input support

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Cc: Simon Horman <horms@verge.net.au>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	magnus.damm@gmail.com, hans.verkuil@cisco.com,
	niklas.soderlund@ragnatech.se, geert@linux-m68k.org,
	sergei.shtylyov@cogentembedded.com
Subject: Re: [PATCH v2 0/3] r8a7793 Gose video input support
Date: Tue, 21 Feb 2017 01:42:15 +0200	[thread overview]
Message-ID: <3952799.qV1GSftN8A@avalon> (raw)
In-Reply-To: <20161020084911.GH4612@verge.net.au>

Hi Ulrich,

On Thursday 20 Oct 2016 10:49:11 Simon Horman wrote:
> On Tue, Oct 18, 2016 at 05:02:20PM +0200, Ulrich Hecht wrote:
> > Hi!
> > 
> > This is a by-the-datasheet implementation of analog and digital video
> > input on the Gose board.
> > 
> > I have tried to address all concerns raised by reviewers, with the
> > exception of the composite input patch, which has been left as is for
> > now.
> > 
> > CU
> > Uli
> > 
> > 
> > Changes since v1:
> > - r8a7793.dtsi: added VIN2
> > - modeled HDMI decoder input/output and connector
> > - added "renesas,rcar-gen2-vin" compat strings
> > - removed unnecessary "remote" node and aliases
> > - set ADV7612 interrupt to GP4_2
> > 
> > Ulrich Hecht (3):
> >   ARM: dts: r8a7793: Enable VIN0-VIN2
> 
> I have queued up the above patch with Laurent and Geert's tags.
> 
> >   ARM: dts: gose: add HDMI input
> >   ARM: dts: gose: add composite video input
> 
> Please address the review of the above two patches and repost.

Could you please do so ? Feedback on 2/3 should be easy to handle. For 3/3, 
you might need to ping the DT maintainers.

> >  arch/arm/boot/dts/r8a7793-gose.dts | 100 +++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/r8a7793.dtsi     |  27 ++++++++++
> >  2 files changed, 127 insertions(+)

-- 
Regards,

Laurent Pinchart