From: Denton Liu <liu.denton@gmail.com>
To: Git Mailing List <git@vger.kernel.org>
Cc: "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>,
"Junio C Hamano" <gitster@pobox.com>
Subject: [PATCH v2 1/6] t4014: clean up style
Date: Thu, 16 May 2019 20:27:40 -0400 [thread overview]
Message-ID: <4ca24ea17652fbd3dd3b960cb4c3e03abf9689b5.1558052674.git.liu.denton@gmail.com> (raw)
In-Reply-To: <cover.1558052674.git.liu.denton@gmail.com>
In Git's tests, there is typically no space between the redirection
operator and the filename. Remove these spaces.
Since output is silenced when running without `-v` and debugging
output is useful with `-v`, remove redirections to /dev/null.
Change here-docs from `<<\EOF` to `<<-\EOF` so that they can be indented
along with the rest of the test case.
Finally, refactor to remove Git commands upstream of pipe. This way, if
an invocation of a Git command fails, the return code won't be lost.
Keep upstream non-Git commands since we have to assume a base level of
sanity.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
---
t/t4014-format-patch.sh | 614 +++++++++++++++++++++-------------------
1 file changed, 319 insertions(+), 295 deletions(-)
diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh
index b6e2fdbc44..3423f974bc 100755
--- a/t/t4014-format-patch.sh
+++ b/t/t4014-format-patch.sh
@@ -34,7 +34,8 @@ test_expect_success setup '
git commit -m "Side changes #3 with \\n backslash-n in it." &&
git checkout master &&
- git diff-tree -p C2 | git apply --index &&
+ git diff-tree -p C2 >patch &&
+ git apply --index <patch &&
test_tick &&
git commit -m "Master accepts moral equivalent of #2"
@@ -77,7 +78,7 @@ test_expect_success "format-patch doesn't consider merge commits" '
git checkout -b merger master &&
test_tick &&
git merge --no-ff slave &&
- cnt=$(git format-patch -3 --stdout | grep "^From " | wc -l) &&
+ cnt=$(git format-patch -3 --stdout >patch && grep "^From " patch | wc -l) &&
test $cnt = 3
'
@@ -85,21 +86,22 @@ test_expect_success "format-patch result applies" '
git checkout -b rebuild-0 master &&
git am -3 patch0 &&
- cnt=$(git rev-list master.. | wc -l) &&
- test $cnt = 2
+ git rev-list master.. >list &&
+ test_line_count = 2 list
'
test_expect_success "format-patch --ignore-if-in-upstream result applies" '
git checkout -b rebuild-1 master &&
git am -3 patch1 &&
- cnt=$(git rev-list master.. | wc -l) &&
- test $cnt = 2
+ git rev-list master.. >list &&
+ test_line_count = 2 list
'
test_expect_success 'commit did not screw up the log message' '
- git cat-file commit side | grep "^Side .* with .* backslash-n"
+ git cat-file commit side >actual &&
+ grep "^Side .* with .* backslash-n" actual
'
@@ -112,7 +114,8 @@ test_expect_success 'format-patch did not screw up the log message' '
test_expect_success 'replay did not screw up the log message' '
- git cat-file commit rebuild-1 | grep "^Side .* with .* backslash-n"
+ git cat-file commit rebuild-1 >actual &&
+ grep "^Side .* with .* backslash-n" actual
'
@@ -122,8 +125,8 @@ test_expect_success 'extra headers' '
" &&
git config --add format.headers "Cc: S E Cipient <scipient@example.com>
" &&
- git format-patch --stdout master..side > patch2 &&
- sed -e "/^\$/q" patch2 > hdrs2 &&
+ git format-patch --stdout master..side >patch2 &&
+ sed -e "/^\$/q" patch2 >hdrs2 &&
grep "^To: R E Cipient <rcipient@example.com>\$" hdrs2 &&
grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs2
@@ -134,7 +137,7 @@ test_expect_success 'extra headers without newlines' '
git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" &&
git config --add format.headers "Cc: S E Cipient <scipient@example.com>" &&
git format-patch --stdout master..side >patch3 &&
- sed -e "/^\$/q" patch3 > hdrs3 &&
+ sed -e "/^\$/q" patch3 >hdrs3 &&
grep "^To: R E Cipient <rcipient@example.com>\$" hdrs3 &&
grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs3
@@ -144,8 +147,8 @@ test_expect_success 'extra headers with multiple To:s' '
git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" &&
git config --add format.headers "To: S E Cipient <scipient@example.com>" &&
- git format-patch --stdout master..side > patch4 &&
- sed -e "/^\$/q" patch4 > hdrs4 &&
+ git format-patch --stdout master..side >patch4 &&
+ sed -e "/^\$/q" patch4 >hdrs4 &&
grep "^To: R E Cipient <rcipient@example.com>,\$" hdrs4 &&
grep "^ *S E Cipient <scipient@example.com>\$" hdrs4
'
@@ -153,72 +156,82 @@ test_expect_success 'extra headers with multiple To:s' '
test_expect_success 'additional command line cc (ascii)' '
git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" &&
- git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 &&
- grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 &&
- grep "^ *S E Cipient <scipient@example.com>\$" patch5
+ git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side >patch5 &&
+ sed -e "/^\$/q" patch5 >hdrs5 &&
+ grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 &&
+ grep "^ *S E Cipient <scipient@example.com>\$" hdrs5
'
test_expect_failure 'additional command line cc (rfc822)' '
git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" &&
- git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 &&
- grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 &&
- grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" patch5
+ git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side >patch5 &&
+ sed -e "/^\$/q" patch5 >hdrs5 &&
+ grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 &&
+ grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" hdrs5
'
test_expect_success 'command line headers' '
git config --unset-all format.headers &&
- git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch6 &&
- grep "^Cc: R E Cipient <rcipient@example.com>\$" patch6
+ git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side >patch6 &&
+ sed -e "/^\$/q" patch6 >hdrs6 &&
+ grep "^Cc: R E Cipient <rcipient@example.com>\$" hdrs6
'
test_expect_success 'configuration headers and command line headers' '
git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" &&
- git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch7 &&
- grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch7 &&
- grep "^ *S E Cipient <scipient@example.com>\$" patch7
+ git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side >patch7 &&
+ sed -e "/^\$/q" patch7 >hdrs7 &&
+ grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs7 &&
+ grep "^ *S E Cipient <scipient@example.com>\$" hdrs7
'
test_expect_success 'command line To: header (ascii)' '
git config --unset-all format.headers &&
- git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 &&
- grep "^To: R E Cipient <rcipient@example.com>\$" patch8
+ git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side >patch8 &&
+ sed -e "/^\$/q" patch8 >hdrs8 &&
+ grep "^To: R E Cipient <rcipient@example.com>\$" hdrs8
'
test_expect_failure 'command line To: header (rfc822)' '
- git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 &&
- grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch8
+ git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side >patch8 &&
+ sed -e "/^\$/q" patch8 >hdrs8 &&
+ grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs8
'
test_expect_failure 'command line To: header (rfc2047)' '
- git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 &&
- grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch8
+ git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side >patch8 &&
+ sed -e "/^\$/q" patch8 >hdrs8 &&
+ grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs8
'
test_expect_success 'configuration To: header (ascii)' '
git config format.to "R E Cipient <rcipient@example.com>" &&
- git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 &&
- grep "^To: R E Cipient <rcipient@example.com>\$" patch9
+ git format-patch --stdout master..side >patch9 &&
+ sed -e "/^\$/q" patch9 >hdrs9 &&
+ grep "^To: R E Cipient <rcipient@example.com>\$" hdrs9
'
test_expect_failure 'configuration To: header (rfc822)' '
git config format.to "R. E. Cipient <rcipient@example.com>" &&
- git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 &&
- grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch9
+ git format-patch --stdout master..side >patch9 &&
+ sed -e "/^\$/q" patch9 >hdrs9 &&
+ grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs9
'
test_expect_failure 'configuration To: header (rfc2047)' '
git config format.to "R Ä Cipient <rcipient@example.com>" &&
- git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 &&
- grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch9
+ git format-patch --stdout master..side >patch9 &&
+ sed -e "/^\$/q" patch9 >hdrs9 &&
+ grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs9
'
# check_patch <patch>: Verify that <patch> looks like a half-sane
@@ -231,52 +244,52 @@ check_patch () {
test_expect_success 'format.from=false' '
- git -c format.from=false format-patch --stdout master..side |
- sed -e "/^\$/q" >patch &&
+ git -c format.from=false format-patch --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
check_patch patch &&
- ! grep "^From: C O Mitter <committer@example.com>\$" patch
+ ! grep "^From: C O Mitter <committer@example.com>\$" hdrs
'
test_expect_success 'format.from=true' '
- git -c format.from=true format-patch --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- grep "^From: C O Mitter <committer@example.com>\$" patch
+ git -c format.from=true format-patch --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ grep "^From: C O Mitter <committer@example.com>\$" hdrs
'
test_expect_success 'format.from with address' '
- git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- grep "^From: F R Om <from@example.com>\$" patch
+ git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ grep "^From: F R Om <from@example.com>\$" hdrs
'
test_expect_success '--no-from overrides format.from' '
- git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- ! grep "^From: F R Om <from@example.com>\$" patch
+ git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ ! grep "^From: F R Om <from@example.com>\$" hdrs
'
test_expect_success '--from overrides format.from' '
- git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side |
- sed -e "/^\$/q" >patch &&
- check_patch patch &&
- ! grep "^From: F R Om <from@example.com>\$" patch
+ git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side >patch &&
+ sed -e "/^\$/q" patch >hdrs &&
+ check_patch hdrs &&
+ ! grep "^From: F R Om <from@example.com>\$" hdrs
'
test_expect_success '--no-to overrides config.to' '
git config --replace-all format.to \
"R E Cipient <rcipient@example.com>" &&
- git format-patch --no-to --stdout master..side |
- sed -e "/^\$/q" >patch10 &&
- check_patch patch10 &&
- ! grep "^To: R E Cipient <rcipient@example.com>\$" patch10
+ git format-patch --no-to --stdout master..side >patch10 &&
+ sed -e "/^\$/q" patch10 >hdrs10 &&
+ check_patch hdrs10 &&
+ ! grep "^To: R E Cipient <rcipient@example.com>\$" hdrs10
'
test_expect_success '--no-to and --to replaces config.to' '
@@ -284,31 +297,31 @@ test_expect_success '--no-to and --to replaces config.to' '
git config --replace-all format.to \
"Someone <someone@out.there>" &&
git format-patch --no-to --to="Someone Else <else@out.there>" \
- --stdout master..side |
- sed -e "/^\$/q" >patch11 &&
- check_patch patch11 &&
- ! grep "^To: Someone <someone@out.there>\$" patch11 &&
- grep "^To: Someone Else <else@out.there>\$" patch11
+ --stdout master..side >patch11 &&
+ sed -e "/^\$/q" patch11 >hdrs11 &&
+ check_patch hdrs11 &&
+ ! grep "^To: Someone <someone@out.there>\$" hdrs11 &&
+ grep "^To: Someone Else <else@out.there>\$" hdrs11
'
test_expect_success '--no-cc overrides config.cc' '
git config --replace-all format.cc \
"C E Cipient <rcipient@example.com>" &&
- git format-patch --no-cc --stdout master..side |
- sed -e "/^\$/q" >patch12 &&
- check_patch patch12 &&
- ! grep "^Cc: C E Cipient <rcipient@example.com>\$" patch12
+ git format-patch --no-cc --stdout master..side >patch12 &&
+ sed -e "/^\$/q" patch12 >hdrs12 &&
+ check_patch hdrs12 &&
+ ! grep "^Cc: C E Cipient <rcipient@example.com>\$" hdrs12
'
test_expect_success '--no-add-header overrides config.headers' '
git config --replace-all format.headers \
"Header1: B E Cipient <rcipient@example.com>" &&
- git format-patch --no-add-header --stdout master..side |
- sed -e "/^\$/q" >patch13 &&
- check_patch patch13 &&
- ! grep "^Header1: B E Cipient <rcipient@example.com>\$" patch13
+ git format-patch --no-add-header --stdout master..side >patch13 &&
+ sed -e "/^\$/q" patch13 >hdrs13 &&
+ check_patch hdrs13 &&
+ ! grep "^Header1: B E Cipient <rcipient@example.com>\$" hdrs13
'
test_expect_success 'multiple files' '
@@ -338,7 +351,7 @@ test_expect_success 'reroll count (-v)' '
check_threading () {
expect="$1" &&
shift &&
- (git format-patch --stdout "$@"; echo $? > status.out) |
+ (git format-patch --stdout "$@"; echo $? >status.out) |
# Prints everything between the Message-ID and In-Reply-To,
# and replaces all Message-ID-lookalikes by a sequence number
perl -ne '
@@ -353,12 +366,12 @@ check_threading () {
print;
}
print "---\n" if /^From /i;
- ' > actual &&
+ ' >actual &&
test 0 = "$(cat status.out)" &&
test_cmp "$expect" actual
}
-cat >> expect.no-threading <<EOF
+cat >>expect.no-threading <<EOF
---
---
---
@@ -369,7 +382,7 @@ test_expect_success 'no threading' '
check_threading expect.no-threading master
'
-cat > expect.thread <<EOF
+cat >expect.thread <<EOF
---
Message-Id: <0>
---
@@ -386,7 +399,7 @@ test_expect_success 'thread' '
check_threading expect.thread --thread master
'
-cat > expect.in-reply-to <<EOF
+cat >expect.in-reply-to <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -406,7 +419,7 @@ test_expect_success 'thread in-reply-to' '
--thread master
'
-cat > expect.cover-letter <<EOF
+cat >expect.cover-letter <<EOF
---
Message-Id: <0>
---
@@ -427,7 +440,7 @@ test_expect_success 'thread cover-letter' '
check_threading expect.cover-letter --cover-letter --thread master
'
-cat > expect.cl-irt <<EOF
+cat >expect.cl-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -459,7 +472,7 @@ test_expect_success 'thread explicit shallow' '
--in-reply-to="<test.message>" --thread=shallow master
'
-cat > expect.deep <<EOF
+cat >expect.deep <<EOF
---
Message-Id: <0>
---
@@ -477,7 +490,7 @@ test_expect_success 'thread deep' '
check_threading expect.deep --thread=deep master
'
-cat > expect.deep-irt <<EOF
+cat >expect.deep-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -500,7 +513,7 @@ test_expect_success 'thread deep in-reply-to' '
--in-reply-to="<test.message>" master
'
-cat > expect.deep-cl <<EOF
+cat >expect.deep-cl <<EOF
---
Message-Id: <0>
---
@@ -524,7 +537,7 @@ test_expect_success 'thread deep cover-letter' '
check_threading expect.deep-cl --cover-letter --thread=deep master
'
-cat > expect.deep-cl-irt <<EOF
+cat >expect.deep-cl-irt <<EOF
---
Message-Id: <0>
In-Reply-To: <1>
@@ -606,7 +619,7 @@ test_expect_success 'cover-letter inherits diff options' '
'
-cat > expect << EOF
+cat >expect <<EOF
This is an excessively long subject line for a message due to the
habit some projects have of not having a short, one-line subject at
the start of the commit message, but rather sticking a whole
@@ -619,12 +632,12 @@ EOF
test_expect_success 'shortlog of cover-letter wraps overly-long onelines' '
git format-patch --cover-letter -2 &&
- sed -e "1,/A U Thor/d" -e "/^\$/q" < 0000-cover-letter.patch > output &&
+ sed -e "1,/A U Thor/d" -e "/^\$/q" <0000-cover-letter.patch >output &&
test_cmp expect output
'
-cat > expect << EOF
+cat >expect <<EOF
index $before..$after 100644
--- a/file
+++ b/file
@@ -646,7 +659,7 @@ test_expect_success 'format-patch respects -U' '
'
-cat > expect << EOF
+cat >expect <<EOF
diff --git a/file b/file
index $before..$after 100644
@@ -662,7 +675,7 @@ EOF
test_expect_success 'format-patch -p suppresses stat' '
git format-patch -p -2 &&
- sed -e "1,/^\$/d" -e "/^+5/q" < 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch > output &&
+ sed -e "1,/^\$/d" -e "/^+5/q" <0001-This-is-an-excessively-long-subject-line-for-a-messa.patch >output &&
test_cmp expect output
'
@@ -717,7 +730,7 @@ test_expect_success 'format-patch from a subdirectory (3)' '
'
test_expect_success 'format-patch --in-reply-to' '
- git format-patch -1 --stdout --in-reply-to "baz@foo.bar" > patch8 &&
+ git format-patch -1 --stdout --in-reply-to "baz@foo.bar" >patch8 &&
grep "^In-Reply-To: <baz@foo.bar>" patch8 &&
grep "^References: <baz@foo.bar>" patch8
'
@@ -738,20 +751,20 @@ test_expect_success 'format-patch --notes --signoff' '
sed "1,/^---$/d" out | grep "test message"
'
-echo "fatal: --name-only does not make sense" > expect.name-only
-echo "fatal: --name-status does not make sense" > expect.name-status
-echo "fatal: --check does not make sense" > expect.check
+echo "fatal: --name-only does not make sense" >expect.name-only
+echo "fatal: --name-status does not make sense" >expect.name-status
+echo "fatal: --check does not make sense" >expect.check
test_expect_success 'options no longer allowed for format-patch' '
- test_must_fail git format-patch --name-only 2> output &&
+ test_must_fail git format-patch --name-only 2>output &&
test_i18ncmp expect.name-only output &&
- test_must_fail git format-patch --name-status 2> output &&
+ test_must_fail git format-patch --name-status 2>output &&
test_i18ncmp expect.name-status output &&
- test_must_fail git format-patch --check 2> output &&
+ test_must_fail git format-patch --check 2>output &&
test_i18ncmp expect.check output'
test_expect_success 'format-patch --numstat should produce a patch' '
- git format-patch --numstat --stdout master..side > output &&
+ git format-patch --numstat --stdout master..side >output &&
test 5 = $(grep "^diff --git a/" output | wc -l)'
test_expect_success 'format-patch -- <path>' '
@@ -763,20 +776,22 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' '
git format-patch --ignore-if-in-upstream HEAD
'
-git_version="$(git --version | sed "s/.* //")"
+git_version="$(git --version >version && sed "s/.* //" version)"
signature() {
printf "%s\n%s\n\n" "-- " "${1:-$git_version}"
}
test_expect_success 'format-patch default signature' '
- git format-patch --stdout -1 | tail -n 3 >output &&
+ git format-patch --stdout -1 >patch &&
+ tail -n 3 patch >output &&
signature >expect &&
test_cmp expect output
'
test_expect_success 'format-patch --signature' '
- git format-patch --stdout --signature="my sig" -1 | tail -n 3 >output &&
+ git format-patch --stdout --signature="my sig" -1 >patch &&
+ tail -n 3 patch >output &&
signature "my sig" >expect &&
test_cmp expect output
'
@@ -1167,282 +1182,282 @@ append_signoff()
test_expect_success 'signoff: commit with no body' '
append_signoff </dev/null >actual &&
- cat <<\EOF | sed "s/EOL$//" >expected &&
-4:Subject: [PATCH] EOL
-8:
-9:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ cat <<-\EOF | sed "s/EOL$//" >expected &&
+ 4:Subject: [PATCH] EOL
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: commit with only subject' '
echo subject | append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: commit with only subject that does not end with NL' '
printf subject | append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: no existing signoffs' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ body
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: no existing signoffs and no trailing NL' '
printf "subject\n\nbody" | append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: some random signoff' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: my@house
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: my@house
-12:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ Signed-off-by: my@house
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: my@house
+ 12:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: misc conforming footer elements' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: my@house
-(cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709)
-Tested-by: Some One <someone@example.com>
-Bug: 1234
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: my@house
-15:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ Signed-off-by: my@house
+ (cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709)
+ Tested-by: Some One <someone@example.com>
+ Bug: 1234
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: my@house
+ 15:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: some random signoff-alike' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
-Fooled-by-me: my@house
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-11:
-12:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ body
+ Fooled-by-me: my@house
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 11:
+ 12:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: not really a signoff' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-I want to mention about Signed-off-by: here.
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:I want to mention about Signed-off-by: here.
-10:
-11:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ I want to mention about Signed-off-by: here.
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:I want to mention about Signed-off-by: here.
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: not really a signoff (2)' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-My unfortunate
-Signed-off-by: example happens to be wrapped here.
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:Signed-off-by: example happens to be wrapped here.
-11:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ My unfortunate
+ Signed-off-by: example happens to be wrapped here.
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:Signed-off-by: example happens to be wrapped here.
+ 11:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: valid S-o-b paragraph in the middle' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-Signed-off-by: my@house
-Signed-off-by: your@house
+ Signed-off-by: my@house
+ Signed-off-by: your@house
-A lot of houses.
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: my@house
-10:Signed-off-by: your@house
-11:
-13:
-14:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ A lot of houses.
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: my@house
+ 10:Signed-off-by: your@house
+ 11:
+ 13:
+ 14:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: the same signoff at the end' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: C O Mitter <committer@example.com>
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ Signed-off-by: C O Mitter <committer@example.com>
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: the same signoff at the end, no trailing NL' '
printf "subject\n\nSigned-off-by: C O Mitter <committer@example.com>" |
append_signoff >actual &&
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-9:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 9:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: the same signoff NOT at the end' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Signed-off-by: C O Mitter <committer@example.com>
-Signed-off-by: my@house
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-11:Signed-off-by: C O Mitter <committer@example.com>
-12:Signed-off-by: my@house
-EOF
+ Signed-off-by: C O Mitter <committer@example.com>
+ Signed-off-by: my@house
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 11:Signed-off-by: C O Mitter <committer@example.com>
+ 12:Signed-off-by: my@house
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: tolerate garbage in conforming footer' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Tested-by: my@house
-Some Trash
-Signed-off-by: C O Mitter <committer@example.com>
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-13:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ Tested-by: my@house
+ Some Trash
+ Signed-off-by: C O Mitter <committer@example.com>
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 13:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: respect trailer config' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-Myfooter: x
-Some Trash
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-11:
-12:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ Myfooter: x
+ Some Trash
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 11:
+ 12:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual &&
test_config trailer.Myfooter.ifexists add &&
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-Myfooter: x
-Some Trash
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-11:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ Myfooter: x
+ Some Trash
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 11:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
test_expect_success 'signoff: footer begins with non-signoff without @ sign' '
- append_signoff <<\EOF >actual &&
-subject
+ append_signoff <<-\EOF >actual &&
+ subject
-body
+ body
-Reviewed-id: Noone
-Tested-by: my@house
-Change-id: Ideadbeef
-Signed-off-by: C O Mitter <committer@example.com>
-Bug: 1234
-EOF
- cat >expected <<\EOF &&
-4:Subject: [PATCH] subject
-8:
-10:
-14:Signed-off-by: C O Mitter <committer@example.com>
-EOF
+ Reviewed-id: Noone
+ Tested-by: my@house
+ Change-id: Ideadbeef
+ Signed-off-by: C O Mitter <committer@example.com>
+ Bug: 1234
+ EOF
+ cat >expected <<-\EOF &&
+ 4:Subject: [PATCH] subject
+ 8:
+ 10:
+ 14:Signed-off-by: C O Mitter <committer@example.com>
+ EOF
test_cmp expected actual
'
@@ -1458,42 +1473,42 @@ test_expect_success 'cover letter using branch description (1)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter master >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (2)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter rebuild-1~2..rebuild-1 >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (3)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter ^master rebuild-1 >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (4)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter master.. >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (5)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter -2 HEAD >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter using branch description (6)' '
git checkout rebuild-1 &&
test_config branch.rebuild-1.description hello &&
git format-patch --stdout --cover-letter -2 >actual &&
- grep hello actual >/dev/null
+ grep hello actual
'
test_expect_success 'cover letter with nothing' '
@@ -1547,7 +1562,8 @@ test_expect_success 'format-patch format.outputDirectory option' '
test_config format.outputDirectory patches &&
rm -fr patches &&
git format-patch master..side &&
- test $(git rev-list master..side | wc -l) -eq $(ls patches | wc -l)
+ git rev-list master..side >list &&
+ test_line_count = $(ls patches | wc -l) list
'
test_expect_success 'format-patch -o overrides format.outputDirectory' '
@@ -1560,13 +1576,21 @@ test_expect_success 'format-patch -o overrides format.outputDirectory' '
test_expect_success 'format-patch --base' '
git checkout side &&
- git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual1 &&
- git format-patch --stdout --base=HEAD~3 HEAD~.. | tail -n 7 >actual2 &&
+ git format-patch --stdout --base=HEAD~3 -1 >patch &&
+ tail -n 7 patch >actual1 &&
+ git format-patch --stdout --base=HEAD~3 HEAD~.. >patch &&
+ tail -n 7 patch >actual2 &&
echo >expected &&
echo "base-commit: $(git rev-parse HEAD~3)" >>expected &&
- echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expected &&
- echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expected &&
- signature >> expected &&
+ git show --patch HEAD~2 >patch &&
+ git patch-id --stable <patch >patch.id.raw &&
+ awk "{print \$1}" <patch.id.raw >patch.id &&
+ echo "prerequisite-patch-id: $(cat patch.id)" >>expected &&
+ git show --patch HEAD~1 >patch &&
+ git patch-id --stable <patch >patch.id.raw &&
+ awk "{print \$1}" <patch.id.raw >patch.id &&
+ echo "prerequisite-patch-id: $(cat patch.id)" >>expected &&
+ signature >>expected &&
test_cmp expected actual1 &&
test_cmp expected actual2
'
--
2.21.0.1049.geb646f7864
next prev parent reply other threads:[~2019-05-17 0:27 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-05 16:24 [PATCH 0/7] teach branch-specific options for format-patch Denton Liu
2019-05-05 16:24 ` [PATCH 1/7] t4014: clean up style Denton Liu
2019-05-05 16:24 ` [PATCH 2/7] Doc: add more detail for git-format-patch Denton Liu
2019-05-05 16:24 ` [PATCH 3/7] branch.c: extract read_branch_config function Denton Liu
2019-05-05 16:24 ` [PATCH 4/7] format-patch: make cover letter subject configurable Denton Liu
2019-05-05 16:24 ` [PATCH 5/7] format-patch: move extra_headers logic later Denton Liu
2019-05-05 16:24 ` [PATCH 6/7] string-list: create string_list_append_all Denton Liu
2019-05-05 16:24 ` [PATCH 7/7] format-patch: read branch-specific To: and Cc: headers Denton Liu
2019-05-07 8:56 ` [PATCH 0/7] teach branch-specific options for format-patch Junio C Hamano
2019-05-07 14:19 ` Denton Liu
2019-05-07 15:05 ` Junio C Hamano
2019-05-07 15:21 ` Denton Liu
2019-05-07 15:46 ` Ævar Arnfjörð Bjarmason
2019-05-08 1:45 ` Junio C Hamano
2019-05-31 2:00 ` [RFC PATCH] config: learn the "onbranch:" includeIf condition Denton Liu
2019-05-31 12:58 ` Johannes Schindelin
2019-05-31 13:16 ` Denton Liu
2019-05-31 17:23 ` Johannes Schindelin
2019-05-31 18:44 ` Denton Liu
2019-05-31 19:33 ` [PATCH v2] " Denton Liu
2019-05-31 20:14 ` Johannes Schindelin
2019-06-05 8:02 ` Johannes Schindelin
2019-06-05 10:08 ` Duy Nguyen
2019-06-05 21:21 ` [PATCH v3] " Denton Liu
2019-06-06 12:52 ` Johannes Schindelin
2019-05-17 0:27 ` [PATCH v2 0/6] teach branch-specific options for format-patch Denton Liu
2019-05-17 0:27 ` Denton Liu [this message]
2019-05-17 0:27 ` [PATCH v2 2/6] Doc: add more detail for git-format-patch Denton Liu
2019-05-17 0:27 ` [PATCH v2 3/6] format-patch: make cover letter subject configurable Denton Liu
2019-05-17 0:27 ` [PATCH v2 4/6] format-patch: move extra_headers logic later Denton Liu
2019-05-17 0:27 ` [PATCH v2 5/6] string-list: create string_list_append_all Denton Liu
2019-05-17 0:27 ` [PATCH v2 6/6] format-patch: read branch-specific To: and Cc: headers Denton Liu
2019-05-17 4:12 ` [PATCH v2 0/6] teach branch-specific options for format-patch Junio C Hamano
2019-05-17 7:25 ` Denton Liu
2019-05-17 16:54 ` Denton Liu
2019-05-22 2:44 ` [PATCH v3 0/8] " Denton Liu
2019-05-22 2:44 ` [PATCH v3 1/8] t4014: clean up style Denton Liu
2019-05-22 2:44 ` [PATCH v3 2/8] Doc: add more detail for git-format-patch Denton Liu
2019-05-22 2:44 ` [PATCH v3 3/8] format-patch: infer cover letter from branch description Denton Liu
2019-05-22 2:44 ` [PATCH v3 4/8] format-patch: move extra_headers logic later Denton Liu
2019-05-22 2:44 ` [PATCH v3 5/8] string-list: create string_list_append_all Denton Liu
2019-05-22 2:44 ` [PATCH v3 6/8] format-patch: read branch-specific To: and Cc: headers Denton Liu
2019-05-22 2:44 ` [PATCH v3 7/8] format-patch: move output_directory logic later Denton Liu
2019-05-22 2:44 ` [PATCH v3 8/8] format-patch: read branch-specific output directory Denton Liu
2019-05-31 0:30 ` [PATCH v3 0/8] teach branch-specific options for format-patch Denton Liu
2019-06-14 21:56 ` [RESEND PATCH " Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 1/8] t4014: clean up style Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 2/8] Doc: add more detail for git-format-patch Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 3/8] format-patch: infer cover letter from branch description Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 4/8] format-patch: move extra_headers logic later Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 5/8] string-list: create string_list_append_all Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 6/8] format-patch: read branch-specific To: and Cc: headers Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 7/8] format-patch: move output_directory logic later Denton Liu
2019-06-14 21:56 ` [RESEND PATCH v3 8/8] format-patch: read branch-specific output directory Denton Liu
2019-10-15 9:06 ` [PATCH v6 0/3] format-patch: learn --infer-cover-subject option (also t4014 cleanup) Denton Liu
2019-10-15 9:06 ` [PATCH v6 1/3] format-patch: replace erroneous and condition Denton Liu
2019-10-15 9:06 ` [PATCH v6 2/3] format-patch: use enum variables Denton Liu
2019-10-15 9:06 ` [PATCH v6 3/3] format-patch: teach --cover-from-description option Denton Liu
2019-10-16 1:28 ` [PATCH v6 0/3] format-patch: learn --infer-cover-subject option (also t4014 cleanup) Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ca24ea17652fbd3dd3b960cb4c3e03abf9689b5.1558052674.git.liu.denton@gmail.com \
--to=liu.denton@gmail.com \
--cc=avarab@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.