From: "René Scharfe" <l.s.r@web.de>
To: Carlo Arenas <carenas@gmail.com>
Cc: johannes.schindelin@gmx.de, avarab@gmail.com,
git@vger.kernel.org, gitster@pobox.com,
michal.kiedrowicz@gmail.com
Subject: Re: [PATCH] SQUASH
Date: Sat, 10 Aug 2019 21:47:49 +0200 [thread overview]
Message-ID: <501f946a-1f18-7c6a-2d15-8ff6375c4192@web.de> (raw)
In-Reply-To: <CAPUEspjtZhhynEmJu_weROaao=1zL+De1h50R-grG36ok+EAyw@mail.gmail.com>
Am 10.08.19 um 10:42 schrieb Carlo Arenas:
> On Sat, Aug 10, 2019 at 12:57 AM René Scharfe <l.s.r@web.de> wrote:
>>
>> Am 10.08.19 um 05:03 schrieb Carlo Marcelo Arenas Belón:
>>> Make using a general context (that is only needed with NED) to depend
>>> on NED being selected at compile time.
>>
>> A custom general context is needed to convince PCRE2 to use xmalloc()
>> instead of mallo(). That is independent of the choice of allocator.
>> So this change would be a step backwards?
>
> My bad, you are correct.
>
> Do you mind then if I "adopt" your patch and submit a reroll with it,
> will also add an "equivalent" one to fix PCRE1 as well then, and we
> will tackle any performance deficiencies or other issues in a future
> series.
I don't mind, sounds good.
René
next prev parent reply other threads:[~2019-08-10 19:48 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-05 11:51 [PATCH 0/1] Fix a problem with PCRE2 and nedmalloc, found via Azure Pipelines Johannes Schindelin via GitGitGadget
2019-08-05 11:51 ` [PATCH 1/1] pcre2: allow overriding the system allocator Johannes Schindelin via GitGitGadget
2019-08-05 16:19 ` Carlo Arenas
2019-08-05 16:27 ` Carlo Arenas
2019-08-05 19:32 ` Johannes Schindelin
2019-08-05 19:26 ` Johannes Schindelin
2019-08-05 21:53 ` Junio C Hamano
2019-08-06 6:24 ` Carlo Arenas
2019-08-06 8:50 ` [PATCH 0/3] grep: no leaks (WIP) Carlo Marcelo Arenas Belón
2019-08-06 8:50 ` [PATCH 1/3] grep: make PCRE1 aware of custom allocator Carlo Marcelo Arenas Belón
2019-08-08 13:54 ` Johannes Schindelin
2019-08-08 15:19 ` Carlo Arenas
2019-08-06 8:50 ` [PATCH 2/3] grep: make PCRE2 " Carlo Marcelo Arenas Belón
2019-08-08 13:56 ` Johannes Schindelin
2019-08-08 14:32 ` Carlo Arenas
2019-08-06 8:50 ` [PATCH 3/3] grep: avoid leak of chartables in PCRE2 Carlo Marcelo Arenas Belón
2019-08-06 16:36 ` [RFC PATCH v3 0/3] grep: no leaks or crashes (windows testing needed) Carlo Marcelo Arenas Belón
2019-08-06 16:36 ` [RFC PATCH v3 1/3] grep: make PCRE1 aware of custom allocator Carlo Marcelo Arenas Belón
2019-08-06 16:36 ` [RFC PATCH v3 2/3] grep: make PCRE2 " Carlo Marcelo Arenas Belón
2019-08-07 5:38 ` René Scharfe
2019-08-07 9:49 ` Carlo Arenas
2019-08-07 13:02 ` René Scharfe
2019-08-07 13:08 ` [PATCH 1/2] nedmalloc: do assignments only after the declaration section René Scharfe
2019-08-07 13:09 ` [PATCH 2/2] nedmalloc: avoid compiler warning about unused value René Scharfe
2019-08-08 2:35 ` [RFC PATCH v3 2/3] grep: make PCRE2 aware of custom allocator Carlo Arenas
2019-08-08 7:07 ` René Scharfe
2019-08-08 12:38 ` Carlo Arenas
2019-08-08 14:29 ` René Scharfe
2019-08-08 20:18 ` Johannes Schindelin
2019-08-07 18:15 ` Junio C Hamano
2019-08-06 16:36 ` [RFC PATCH v3 3/3] grep: avoid leak of chartables in PCRE2 Carlo Marcelo Arenas Belón
2019-08-06 16:48 ` [RFC PATCH v3 0/3] grep: no leaks or crashes (windows testing needed) Junio C Hamano
2019-08-07 21:39 ` [RFC PATCH v4 " Carlo Marcelo Arenas Belón
2019-08-07 21:39 ` [RFC PATCH v4 1/3] grep: make PCRE1 aware of custom allocator Carlo Marcelo Arenas Belón
2019-08-07 21:39 ` [RFC PATCH v4 2/3] grep: make PCRE2 " Carlo Marcelo Arenas Belón
2019-08-07 22:28 ` Junio C Hamano
2019-08-07 21:39 ` [RFC PATCH v4 3/3] grep: avoid leak of chartables in PCRE2 Carlo Marcelo Arenas Belón
2019-08-09 3:02 ` [RFC PATCH v5 0/3] grep: almost no more leaks, hopefully no crashes Carlo Marcelo Arenas Belón
2019-08-09 3:02 ` [RFC PATCH v5 1/3] grep: make PCRE1 aware of custom allocator Carlo Marcelo Arenas Belón
2019-08-09 3:02 ` [RFC PATCH v5 2/3] grep: make PCRE2 " Carlo Marcelo Arenas Belón
2019-08-27 9:07 ` Johannes Schindelin
2019-08-27 11:51 ` Carlo Arenas
2019-10-03 5:02 ` Junio C Hamano
2019-10-03 8:08 ` Johannes Schindelin
2019-10-03 11:17 ` Carlo Arenas
2019-10-03 18:23 ` Johannes Schindelin
2019-10-03 22:57 ` Junio C Hamano
2019-08-09 3:02 ` [RFC PATCH v5 3/3] grep: avoid leak of chartables in PCRE2 Carlo Marcelo Arenas Belón
2019-08-09 11:24 ` [RFC PATCH v5 0/3] grep: almost no more leaks, hopefully no crashes Carlo Arenas
2019-08-09 17:01 ` René Scharfe
2019-08-09 17:46 ` Junio C Hamano
2019-08-09 21:26 ` Johannes Schindelin
2019-08-10 3:03 ` [PATCH] SQUASH Carlo Marcelo Arenas Belón
2019-08-10 7:57 ` René Scharfe
2019-08-10 8:42 ` Carlo Arenas
2019-08-10 19:47 ` René Scharfe [this message]
2019-08-12 7:35 ` Carlo Arenas
2019-08-12 12:14 ` René Scharfe
2019-08-12 12:28 ` Carlo Arenas
2019-08-10 13:57 ` Johannes Schindelin
2019-08-10 3:05 ` [RFC PATCH v5 0/3] grep: almost no more leaks, hopefully no crashes Carlo Arenas
2019-08-10 7:56 ` René Scharfe
2019-08-10 12:40 ` Carlo Arenas
2019-08-10 21:16 ` René Scharfe
2019-08-08 20:21 ` [RFC PATCH v3 0/3] grep: no leaks or crashes (windows testing needed) Johannes Schindelin
2019-08-09 6:52 ` Carlo Arenas
2019-08-09 21:13 ` Johannes Schindelin
-- strict thread matches above, loose matches on Subject: below --
2016-11-22 19:22 [PATCHv2 4/4] submodule: add embed-git-dir function Stefan Beller
2016-11-22 19:33 ` [PATCH] SQUASH Stefan Beller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=501f946a-1f18-7c6a-2d15-8ff6375c4192@web.de \
--to=l.s.r@web.de \
--cc=avarab@gmail.com \
--cc=carenas@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=johannes.schindelin@gmx.de \
--cc=michal.kiedrowicz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.