From: Aaron Lu <aaron.lu@intel.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>, linux-scsi@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>,
"James E.J. Bottomley" <JBottomley@parallels.com>,
Vinayak Holikatti <vinholikatti@gmail.com>
Subject: Re: [Update][PATCH] SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
Date: Wed, 10 Dec 2014 09:43:36 +0800 [thread overview]
Message-ID: <5487A548.6070800@intel.com> (raw)
In-Reply-To: <3039454.iyzHXUp3Uj@vostro.rjw.lan>
On 12/10/2014 05:47 AM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Subject: SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
>
> After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
> selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
> depending on CONFIG_PM_RUNTIME may now be changed to depend on
> CONFIG_PM.
>
> Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
> drivers/scsi/ and in include/scsi/scsi_device.h.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Thanks,
Aaron
> ---
>
> Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
> PM_SLEEP is selected) which is only in linux-next at the moment (via the
> linux-pm tree).
>
> Please let me know if it is OK to take this one into linux-pm.
>
> ---
> drivers/scsi/scsi_pm.c | 10 ----------
> drivers/scsi/scsi_priv.h | 5 ++---
> drivers/scsi/ufs/ufshcd-pci.c | 11 ++++-------
> drivers/scsi/ufs/ufshcd-pltfrm.c | 11 ++++-------
> include/scsi/scsi_device.h | 4 ++--
> 5 files changed, 12 insertions(+), 29 deletions(-)
>
> Index: linux-pm/include/scsi/scsi_device.h
> ===================================================================
> --- linux-pm.orig/include/scsi/scsi_device.h
> +++ linux-pm/include/scsi/scsi_device.h
> @@ -440,13 +440,13 @@ static inline int scsi_execute_req(struc
> extern void sdev_disable_disk_events(struct scsi_device *sdev);
> extern void sdev_enable_disk_events(struct scsi_device *sdev);
>
> -#ifdef CONFIG_PM_RUNTIME
> +#ifdef CONFIG_PM
> extern int scsi_autopm_get_device(struct scsi_device *);
> extern void scsi_autopm_put_device(struct scsi_device *);
> #else
> static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
> static inline void scsi_autopm_put_device(struct scsi_device *d) {}
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
> {
> Index: linux-pm/drivers/scsi/scsi_priv.h
> ===================================================================
> --- linux-pm.orig/drivers/scsi/scsi_priv.h
> +++ linux-pm/drivers/scsi/scsi_priv.h
> @@ -157,8 +157,7 @@ static inline void scsi_netlink_exit(voi
> /* scsi_pm.c */
> #ifdef CONFIG_PM
> extern const struct dev_pm_ops scsi_bus_pm_ops;
> -#endif
> -#ifdef CONFIG_PM_RUNTIME
> +
> extern void scsi_autopm_get_target(struct scsi_target *);
> extern void scsi_autopm_put_target(struct scsi_target *);
> extern int scsi_autopm_get_host(struct Scsi_Host *);
> @@ -168,7 +167,7 @@ static inline void scsi_autopm_get_targe
> static inline void scsi_autopm_put_target(struct scsi_target *t) {}
> static inline int scsi_autopm_get_host(struct Scsi_Host *h) { return 0; }
> static inline void scsi_autopm_put_host(struct Scsi_Host *h) {}
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> extern struct async_domain scsi_sd_pm_domain;
> extern struct async_domain scsi_sd_probe_domain;
> Index: linux-pm/drivers/scsi/scsi_pm.c
> ===================================================================
> --- linux-pm.orig/drivers/scsi/scsi_pm.c
> +++ linux-pm/drivers/scsi/scsi_pm.c
> @@ -213,8 +213,6 @@ static int scsi_bus_restore(struct devic
>
> #endif /* CONFIG_PM_SLEEP */
>
> -#ifdef CONFIG_PM_RUNTIME
> -
> static int sdev_runtime_suspend(struct device *dev)
> {
> const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
> @@ -332,14 +330,6 @@ void scsi_autopm_put_host(struct Scsi_Ho
> pm_runtime_put_sync(&shost->shost_gendev);
> }
>
> -#else
> -
> -#define scsi_runtime_suspend NULL
> -#define scsi_runtime_resume NULL
> -#define scsi_runtime_idle NULL
> -
> -#endif /* CONFIG_PM_RUNTIME */
> -
> const struct dev_pm_ops scsi_bus_pm_ops = {
> .prepare = scsi_bus_prepare,
> .suspend = scsi_bus_suspend,
> Index: linux-pm/drivers/scsi/ufs/ufshcd-pci.c
> ===================================================================
> --- linux-pm.orig/drivers/scsi/ufs/ufshcd-pci.c
> +++ linux-pm/drivers/scsi/ufs/ufshcd-pci.c
> @@ -62,12 +62,7 @@ static int ufshcd_pci_resume(struct devi
> {
> return ufshcd_system_resume(dev_get_drvdata(dev));
> }
> -#else
> -#define ufshcd_pci_suspend NULL
> -#define ufshcd_pci_resume NULL
> -#endif /* CONFIG_PM */
>
> -#ifdef CONFIG_PM_RUNTIME
> static int ufshcd_pci_runtime_suspend(struct device *dev)
> {
> return ufshcd_runtime_suspend(dev_get_drvdata(dev));
> @@ -80,11 +75,13 @@ static int ufshcd_pci_runtime_idle(struc
> {
> return ufshcd_runtime_idle(dev_get_drvdata(dev));
> }
> -#else /* !CONFIG_PM_RUNTIME */
> +#else /* !CONFIG_PM */
> +#define ufshcd_pci_suspend NULL
> +#define ufshcd_pci_resume NULL
> #define ufshcd_pci_runtime_suspend NULL
> #define ufshcd_pci_runtime_resume NULL
> #define ufshcd_pci_runtime_idle NULL
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> /**
> * ufshcd_pci_shutdown - main function to put the controller in reset state
> Index: linux-pm/drivers/scsi/ufs/ufshcd-pltfrm.c
> ===================================================================
> --- linux-pm.orig/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ linux-pm/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -266,12 +266,7 @@ static int ufshcd_pltfrm_resume(struct d
> {
> return ufshcd_system_resume(dev_get_drvdata(dev));
> }
> -#else
> -#define ufshcd_pltfrm_suspend NULL
> -#define ufshcd_pltfrm_resume NULL
> -#endif
>
> -#ifdef CONFIG_PM_RUNTIME
> static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
> {
> return ufshcd_runtime_suspend(dev_get_drvdata(dev));
> @@ -284,11 +279,13 @@ static int ufshcd_pltfrm_runtime_idle(st
> {
> return ufshcd_runtime_idle(dev_get_drvdata(dev));
> }
> -#else /* !CONFIG_PM_RUNTIME */
> +#else /* !CONFIG_PM */
> +#define ufshcd_pltfrm_suspend NULL
> +#define ufshcd_pltfrm_resume NULL
> #define ufshcd_pltfrm_runtime_suspend NULL
> #define ufshcd_pltfrm_runtime_resume NULL
> #define ufshcd_pltfrm_runtime_idle NULL
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
> {
>
next prev parent reply other threads:[~2014-12-10 1:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 1:22 [PATCH] SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM Rafael J. Wysocki
2014-12-09 6:19 ` Aaron Lu
2014-12-09 21:26 ` Rafael J. Wysocki
2014-12-09 21:47 ` [Update][PATCH] " Rafael J. Wysocki
2014-12-10 1:43 ` Aaron Lu [this message]
2014-12-15 8:22 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5487A548.6070800@intel.com \
--to=aaron.lu@intel.com \
--cc=JBottomley@parallels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=stern@rowland.harvard.edu \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.