All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: Shawn Lin <shawn.lin@rock-chips.com>,
	Ulf Hansson <ulf.hansson@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Heiko Stuebner <heiko@sntech.de>,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 3/5] mmc: core: implement enhanced strobe support
Date: Fri, 20 May 2016 12:54:37 +0900	[thread overview]
Message-ID: <573E8A7D.3040308@samsung.com> (raw)
In-Reply-To: <573E815C.5080204@rock-chips.com>

On 05/20/2016 12:15 PM, Shawn Lin wrote:
> Hi
> 
> 在 2016-5-20 10:45, Jaehoon Chung 写道:
>> On 05/10/2016 06:09 PM, Shawn Lin wrote:
>>> Controllers use data strobe line to latch data from devices
>>> under hs400 mode, but not for cmd line. So since emmc 5.1, JEDEC
>>> introduces enhanced strobe mode for latching cmd response from
>>> emmc devices to host controllers. This new feature is optional,
>>> so it depends both on device's cap and host's cap to decide
>>> whether to use it or not.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>> ---
>>>
>>> Changes in v3: None
>>> Changes in v2: None
>>>
>>>   drivers/mmc/core/bus.c   |  3 +-
>>>   drivers/mmc/core/core.c  |  8 +++++
>>>   drivers/mmc/core/mmc.c   | 79 ++++++++++++++++++++++++++++++++++++++++++++++--
>>>   include/linux/mmc/card.h |  1 +
>>>   include/linux/mmc/host.h | 11 +++++++
>>>   include/linux/mmc/mmc.h  |  3 ++
>>>   6 files changed, 102 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
>>> index 4bc48f1..7e94b9d 100644
>>> --- a/drivers/mmc/core/bus.c
>>> +++ b/drivers/mmc/core/bus.c
>>> @@ -332,12 +332,13 @@ int mmc_add_card(struct mmc_card *card)
>>>               mmc_card_ddr52(card) ? "DDR " : "",
>>>               type);
>>>       } else {
>>> -        pr_info("%s: new %s%s%s%s%s card at address %04x\n",
>>> +        pr_info("%s: new %s%s%s%s%s%s card at address %04x\n",
>>>               mmc_hostname(card->host),
>>>               mmc_card_uhs(card) ? "ultra high speed " :
>>>               (mmc_card_hs(card) ? "high speed " : ""),
>>>               mmc_card_hs400(card) ? "HS400 " :
>>>               (mmc_card_hs200(card) ? "HS200 " : ""),
>>> +            mmc_card_hs400es(card) ? "Enhanced strobe" : "",
>>>               mmc_card_ddr52(card) ? "DDR " : "",
>>>               uhs_bus_speed_mode, type, card->rca);
>>>       }
>>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>>> index 99275e4..a559501 100644
>>> --- a/drivers/mmc/core/core.c
>>> +++ b/drivers/mmc/core/core.c
>>> @@ -1127,6 +1127,14 @@ void mmc_set_initial_state(struct mmc_host *host)
>>>       host->ios.bus_width = MMC_BUS_WIDTH_1;
>>>       host->ios.timing = MMC_TIMING_LEGACY;
>>>       host->ios.drv_type = 0;
>>> +    host->ios.enhanced_strobe = false;
>>> +
>>> +    /*
>>> +     * Make sure we are in non-enhanced strobe mode before we
>>> +     * actually enable it in ext_csd.
>>> +     */
>>> +    if (host->ops->hs400_enhanced_strobe)
>>> +        host->ops->hs400_enhanced_strobe(host, &host->ios);
>>>
>>>       mmc_set_ios(host);
>>>   }
>>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>>> index f99c47e..c2d1981 100644
>>> --- a/drivers/mmc/core/mmc.c
>>> +++ b/drivers/mmc/core/mmc.c
>>> @@ -235,6 +235,11 @@ static void mmc_select_card_type(struct mmc_card *card)
>>>           avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V;
>>>       }
>>>
>>> +    if ((caps2 & MMC_CAP2_HS400_ES) &&
>>> +        card->ext_csd.strobe_support &&
>>> +        (card_type & EXT_CSD_CARD_TYPE_HS400))
>>> +        avail_type |= EXT_CSD_CARD_TYPE_HS400ES;
>>
>> Does it need to check whether support HS400_1.8V/1.2V or not?
>> It should be more stable than now.
>>
> 
> Ahh, right.
> I need to add "avail_type & EXT_CSD_CARD_TYPE_HS400" instead of
> "card_type & EXT_CSD_CARD_TYPE_HS400"... because if "avail_type &
> EXT_CSD_CARD_TYPE_HS400" is true, it implies that "card_type & EXT_CSD_CARD_TYPE_HS400" must be true.

Otherwise, you can check or add the capabilities in the parse_of_mmc().
It can choose according to your preference. :)

Anyway, i have tested your patches..If you send the patch V4, i will also test.

Best Regards,
Jaehoon Chung

> 
> 
> Thansk for catching this!
> 
> 
>> if (avail_type & (EXT_CSD_CARD_TYPE_HS400_1.8V | EXT_CSD_CARD_TYPE_HS400_1.2V)) {
>>     if ((cap2 & MMC_CAP2_HS400_ES) && ...
>> }
>>
>> how about this?
>>
>> Best Regards,
>> Jaehoon Chung
>>
>>> +
>>>       card->ext_csd.hs_max_dtr = hs_max_dtr;
>>>       card->ext_csd.hs200_max_dtr = hs200_max_dtr;
>>>       card->mmc_avail_type = avail_type;
>>> @@ -383,6 +388,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
>>>               mmc_card_set_blockaddr(card);
>>>       }
>>>
>>> +    card->ext_csd.strobe_support = ext_csd[EXT_CSD_STROBE_SUPPORT];
>>>       card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
>>>       mmc_select_card_type(card);
>>>
>>> @@ -1216,6 +1222,73 @@ out_err:
>>>       return err;
>>>   }
>>>
>>> +static int mmc_select_hs400es(struct mmc_card *card)
>>> +{
>>> +    struct mmc_host *host = card->host;
>>> +    int err = 0;
>>> +    u8 val;
>>> +
>>> +    err = mmc_select_bus_width(card);
>>> +    if (IS_ERR_VALUE(err))
>>> +        goto out_err;
>>> +
>>> +    /* Switch card to HS mode */
>>> +    err = mmc_select_hs(card);
>>> +    if (err) {
>>> +        pr_err("%s: switch to high-speed failed, err:%d\n",
>>> +            mmc_hostname(host), err);
>>> +        goto out_err;
>>> +    }
>>> +
>>> +    err = mmc_switch_status(card);
>>> +    if (err)
>>> +        goto out_err;
>>> +
>>> +    /* Switch card to DDR with strobe bit */
>>> +    val = EXT_CSD_DDR_BUS_WIDTH_8 | EXT_CSD_BUS_WIDTH_STROBE;
>>> +    err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>>> +             EXT_CSD_BUS_WIDTH,
>>> +             val,
>>> +             card->ext_csd.generic_cmd6_time);
>>> +    if (err) {
>>> +        pr_err("%s: switch to bus width for hs400es failed, err:%d\n",
>>> +            mmc_hostname(host), err);
>>> +        goto out_err;
>>> +    }
>>> +
>>> +    /* Switch card to HS400 */
>>> +    val = EXT_CSD_TIMING_HS400 |
>>> +          card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
>>> +    err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>>> +               EXT_CSD_HS_TIMING, val,
>>> +               card->ext_csd.generic_cmd6_time,
>>> +               true, false, true);
>>> +    if (err) {
>>> +        pr_err("%s: switch to hs400es failed, err:%d\n",
>>> +            mmc_hostname(host), err);
>>> +        goto out_err;
>>> +    }
>>> +
>>> +    /* Set host controller to HS400 timing and frequency */
>>> +    mmc_set_timing(host, MMC_TIMING_MMC_HS400);
>>> +
>>> +    /* Controller enable enhanced strobe function */
>>> +    host->ios.enhanced_strobe = true;
>>> +    if (host->ops->hs400_enhanced_strobe)
>>> +        host->ops->hs400_enhanced_strobe(host, &host->ios);
>>> +
>>> +    err = mmc_switch_status(card);
>>> +    if (err)
>>> +        goto out_err;
>>> +
>>> +    return 0;
>>> +
>>> +out_err:
>>> +    pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
>>> +           __func__, err);
>>> +    return err;
>>> +}
>>> +
>>>   static void mmc_select_driver_type(struct mmc_card *card)
>>>   {
>>>       int card_drv_type, drive_strength, drv_type;
>>> @@ -1297,7 +1370,7 @@ err:
>>>   }
>>>
>>>   /*
>>> - * Activate High Speed or HS200 mode if supported.
>>> + * Activate High Speed, HS200 or HS400ES mode if supported.
>>>    */
>>>   static int mmc_select_timing(struct mmc_card *card)
>>>   {
>>> @@ -1306,7 +1379,9 @@ static int mmc_select_timing(struct mmc_card *card)
>>>       if (!mmc_can_ext_csd(card))
>>>           goto bus_speed;
>>>
>>> -    if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
>>> +    if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES)
>>> +        err = mmc_select_hs400es(card);
>>> +    else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
>>>           err = mmc_select_hs200(card);
>>>       else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS)
>>>           err = mmc_select_hs(card);
>>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>>> index eb0151b..22defc2 100644
>>> --- a/include/linux/mmc/card.h
>>> +++ b/include/linux/mmc/card.h
>>> @@ -95,6 +95,7 @@ struct mmc_ext_csd {
>>>       u8            raw_partition_support;    /* 160 */
>>>       u8            raw_rpmb_size_mult;    /* 168 */
>>>       u8            raw_erased_mem_count;    /* 181 */
>>> +    u8            strobe_support;        /* 184 */
>>>       u8            raw_ext_csd_structure;    /* 194 */
>>>       u8            raw_card_type;        /* 196 */
>>>       u8            raw_driver_strength;    /* 197 */
>>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>>> index 2a06fb0..f98bd0e 100644
>>> --- a/include/linux/mmc/host.h
>>> +++ b/include/linux/mmc/host.h
>>> @@ -19,6 +19,7 @@
>>>
>>>   #include <linux/mmc/core.h>
>>>   #include <linux/mmc/card.h>
>>> +#include <linux/mmc/mmc.h>
>>>   #include <linux/mmc/pm.h>
>>>
>>>   struct mmc_ios {
>>> @@ -77,6 +78,8 @@ struct mmc_ios {
>>>   #define MMC_SET_DRIVER_TYPE_A    1
>>>   #define MMC_SET_DRIVER_TYPE_C    2
>>>   #define MMC_SET_DRIVER_TYPE_D    3
>>> +
>>> +    bool enhanced_strobe;            /* hs400es selection */
>>>   };
>>>
>>>   struct mmc_host_ops {
>>> @@ -143,6 +146,9 @@ struct mmc_host_ops {
>>>
>>>       /* Prepare HS400 target operating frequency depending host driver */
>>>       int    (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
>>> +    /* Prepare enhanced strobe depending host driver */
>>> +    void    (*hs400_enhanced_strobe)(struct mmc_host *host,
>>> +                     struct mmc_ios *ios);
>>>       int    (*select_drive_strength)(struct mmc_card *card,
>>>                        unsigned int max_dtr, int host_drv,
>>>                        int card_drv, int *drv_type);
>>> @@ -513,6 +519,11 @@ static inline bool mmc_card_hs400(struct mmc_card *card)
>>>       return card->host->ios.timing == MMC_TIMING_MMC_HS400;
>>>   }
>>>
>>> +static inline bool mmc_card_hs400es(struct mmc_card *card)
>>> +{
>>> +    return card->host->ios.enhanced_strobe == true;
>>> +}
>>> +
>>>   void mmc_retune_timer_stop(struct mmc_host *host);
>>>
>>>   static inline void mmc_retune_needed(struct mmc_host *host)
>>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>>> index 15f2c4a..c376209 100644
>>> --- a/include/linux/mmc/mmc.h
>>> +++ b/include/linux/mmc/mmc.h
>>> @@ -297,6 +297,7 @@ struct _mmc_csd {
>>>   #define EXT_CSD_PART_CONFIG        179    /* R/W */
>>>   #define EXT_CSD_ERASED_MEM_CONT        181    /* RO */
>>>   #define EXT_CSD_BUS_WIDTH        183    /* R/W */
>>> +#define EXT_CSD_STROBE_SUPPORT        184    /* RO */
>>>   #define EXT_CSD_HS_TIMING        185    /* R/W */
>>>   #define EXT_CSD_POWER_CLASS        187    /* R/W */
>>>   #define EXT_CSD_REV            192    /* RO */
>>> @@ -380,12 +381,14 @@ struct _mmc_csd {
>>>   #define EXT_CSD_CARD_TYPE_HS400_1_2V    (1<<7)    /* Card can run at 200MHz DDR, 1.2V */
>>>   #define EXT_CSD_CARD_TYPE_HS400        (EXT_CSD_CARD_TYPE_HS400_1_8V | \
>>>                        EXT_CSD_CARD_TYPE_HS400_1_2V)
>>> +#define EXT_CSD_CARD_TYPE_HS400ES    (1<<8)    /* Card can run at HS400ES */
>>>
>>>   #define EXT_CSD_BUS_WIDTH_1    0    /* Card is in 1 bit mode */
>>>   #define EXT_CSD_BUS_WIDTH_4    1    /* Card is in 4 bit mode */
>>>   #define EXT_CSD_BUS_WIDTH_8    2    /* Card is in 8 bit mode */
>>>   #define EXT_CSD_DDR_BUS_WIDTH_4    5    /* Card is in 4 bit DDR mode */
>>>   #define EXT_CSD_DDR_BUS_WIDTH_8    6    /* Card is in 8 bit DDR mode */
>>> +#define EXT_CSD_BUS_WIDTH_STROBE BIT(7)    /* Enhanced strobe mode */
>>>
>>>   #define EXT_CSD_TIMING_BC    0    /* Backwards compatility */
>>>   #define EXT_CSD_TIMING_HS    1    /* High speed */
>>>
>>
>>
>>
>>
> 
> -- 
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

  reply	other threads:[~2016-05-20  3:54 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-10  9:09 [PATCH v3 0/5] Add enhanced strobe support for emmc version 5.1 or later Shawn Lin
2016-05-10  9:09 ` Shawn Lin
2016-05-10  9:09 ` Shawn Lin
2016-05-10  9:09 ` [PATCH v3 1/5] Documentation: mmc: add mmc-hs400-enhanced-strobe Shawn Lin
2016-05-10  9:09 ` [PATCH v3 2/5] mmc: core: add mmc-hs400-enhanced-strobe support Shawn Lin
2016-05-10  9:09   ` Shawn Lin
2016-05-10  9:09 ` [PATCH v3 3/5] mmc: core: implement enhanced strobe support Shawn Lin
2016-05-10  9:09   ` Shawn Lin
2016-05-20  0:18   ` Doug Anderson
2016-05-20  1:48     ` Shawn Lin
2016-05-20  1:48       ` Shawn Lin
2016-05-20  2:19       ` Doug Anderson
2016-05-20  2:45   ` Jaehoon Chung
2016-05-20  3:15     ` Shawn Lin
2016-05-20  3:54       ` Jaehoon Chung [this message]
2016-05-20  4:15         ` Shawn Lin
2016-05-10  9:09 ` [PATCH v3 4/5] mmc: debugfs: add HS400 enhanced strobe description Shawn Lin
2016-05-10  9:09   ` Shawn Lin
2016-05-10  9:10 ` [PATCH v3 5/5] mmc: sdhci-of-arasan: implement enhanced strobe callback Shawn Lin
2016-05-10  9:10   ` Shawn Lin
2016-05-20  0:11   ` Doug Anderson
2016-05-20  1:49     ` Shawn Lin
2016-05-20  1:49       ` Shawn Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=573E8A7D.3040308@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.