All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux PM list <linux-pm@vger.kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux PCI <linux-pci@vger.kernel.org>,
	Dmitry Torokhov <dtor@google.com>,
	Aubrey Li <aubrey.li@intel.com>
Subject: [PATCH 12/13] PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle
Date: Mon, 01 Sep 2014 16:28:50 +0200	[thread overview]
Message-ID: <6235319.4FdiIbbmKj@vostro.rjw.lan> (raw)
In-Reply-To: <2516134.pmOxkEuOOy@vostro.rjw.lan>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

To make PCIe PME interrupts wake up the system from suspend to idle,
make the PME driver use enable_irq_wake() on the IRQ during system
suspend (if there are any wakeup devices below the given PCIe port)
without disabling PME interrupts.  This way, an interrupt will still
trigger if a wakeup event happens and the system will be woken up (or
system suspend in progress will be aborted) by means of the new
mechanics introduced previously.

This change allows Wake-on-LAN to be used for wakeup from
suspend-to-idle on my MSI Wind tesbed netbook.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/pci/pcie/pme.c |   61 ++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 51 insertions(+), 10 deletions(-)

Index: linux-pm/drivers/pci/pcie/pme.c
===================================================================
--- linux-pm.orig/drivers/pci/pcie/pme.c
+++ linux-pm/drivers/pci/pcie/pme.c
@@ -41,11 +41,17 @@ static int __init pcie_pme_setup(char *s
 }
 __setup("pcie_pme=", pcie_pme_setup);
 
+enum pme_suspend_level {
+	PME_SUSPEND_NONE = 0,
+	PME_SUSPEND_WAKEUP,
+	PME_SUSPEND_NOIRQ,
+};
+
 struct pcie_pme_service_data {
 	spinlock_t lock;
 	struct pcie_device *srv;
 	struct work_struct work;
-	bool noirq; /* Don't enable the PME interrupt used by this service. */
+	enum pme_suspend_level suspend_level;
 };
 
 /**
@@ -223,7 +229,7 @@ static void pcie_pme_work_fn(struct work
 	spin_lock_irq(&data->lock);
 
 	for (;;) {
-		if (data->noirq)
+		if (data->suspend_level != PME_SUSPEND_NONE)
 			break;
 
 		pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
@@ -250,7 +256,7 @@ static void pcie_pme_work_fn(struct work
 		spin_lock_irq(&data->lock);
 	}
 
-	if (!data->noirq)
+	if (data->suspend_level == PME_SUSPEND_NONE)
 		pcie_pme_interrupt_enable(port, true);
 
 	spin_unlock_irq(&data->lock);
@@ -367,6 +373,21 @@ static int pcie_pme_probe(struct pcie_de
 	return ret;
 }
 
+static bool pcie_pme_check_wakeup(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	if (!bus)
+		return false;
+
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		if (device_may_wakeup(&dev->dev)
+		    || pcie_pme_check_wakeup(dev->subordinate))
+			return true;
+
+	return false;
+}
+
 /**
  * pcie_pme_suspend - Suspend PCIe PME service device.
  * @srv: PCIe service device to suspend.
@@ -375,11 +396,26 @@ static int pcie_pme_suspend(struct pcie_
 {
 	struct pcie_pme_service_data *data = get_service_data(srv);
 	struct pci_dev *port = srv->port;
+	bool wakeup;
 
+	if (device_may_wakeup(&port->dev)) {
+		wakeup = true;
+	} else {
+		down_read(&pci_bus_sem);
+		wakeup = pcie_pme_check_wakeup(port->subordinate);
+		up_read(&pci_bus_sem);
+	}
 	spin_lock_irq(&data->lock);
-	pcie_pme_interrupt_enable(port, false);
-	pcie_clear_root_pme_status(port);
-	data->noirq = true;
+	if (wakeup) {
+		enable_irq_wake(srv->irq);
+		data->suspend_level = PME_SUSPEND_WAKEUP;
+	} else {
+		struct pci_dev *port = srv->port;
+
+		pcie_pme_interrupt_enable(port, false);
+		pcie_clear_root_pme_status(port);
+		data->suspend_level = PME_SUSPEND_NOIRQ;
+	}
 	spin_unlock_irq(&data->lock);
 
 	synchronize_irq(srv->irq);
@@ -394,12 +430,17 @@ static int pcie_pme_suspend(struct pcie_
 static int pcie_pme_resume(struct pcie_device *srv)
 {
 	struct pcie_pme_service_data *data = get_service_data(srv);
-	struct pci_dev *port = srv->port;
 
 	spin_lock_irq(&data->lock);
-	data->noirq = false;
-	pcie_clear_root_pme_status(port);
-	pcie_pme_interrupt_enable(port, true);
+	if (data->suspend_level == PME_SUSPEND_NOIRQ) {
+		struct pci_dev *port = srv->port;
+
+		pcie_clear_root_pme_status(port);
+		pcie_pme_interrupt_enable(port, true);
+	} else {
+		disable_irq_wake(srv->irq);
+	}
+	data->suspend_level = PME_SUSPEND_NONE;
 	spin_unlock_irq(&data->lock);
 
 	return 0;


  parent reply	other threads:[~2014-09-01 14:11 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-11 13:56 [PATCH 0/6 v2] irq / PM: Shared IRQs vs IRQF_NO_SUSPEND and suspend-to-idle wakeup interrupts Rafael J. Wysocki
2014-08-11 13:58 ` [PATCH 1/6 v2] PM / sleep: Mechanism for aborting system suspends unconditionally Rafael J. Wysocki
2014-08-11 13:59 ` [PATCH 2/6 v2] irq / PM: Make IRQF_NO_SUSPEND work with shared interrupts Rafael J. Wysocki
2014-08-11 14:00 ` [PATCH 3/6 v2] irq / PM: Make wakeup interrupts work with suspend-to-idle Rafael J. Wysocki
2014-08-11 14:01 ` [PATCH 4/6 v2] x86 / PM: Set IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects Rafael J. Wysocki
2014-08-11 14:02 ` [PATCH 5/6 v2] PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle Rafael J. Wysocki
2014-08-11 14:03 ` [PATCH 6/6 v2] irq / PM: Document rules related to system suspend and interrupts Rafael J. Wysocki
2014-08-26 23:46 ` [PATCH 0/5 v3] irq / PM: Suspend-to-idle wakeup interrupts Rafael J. Wysocki
2014-08-26 23:47   ` [PATCH 1/5 v3] PM / sleep: Mechanism for aborting system suspends unconditionally Rafael J. Wysocki
2014-08-26 23:49   ` [PATCH 2/5 v3] irq / PM: Make wakeup interrupts work with suspend-to-idle Rafael J. Wysocki
2014-08-27 20:32     ` Thomas Gleixner
2014-08-27 22:51       ` Rafael J. Wysocki
2014-08-28  9:23         ` Thomas Gleixner
2014-08-29  1:51           ` Rafael J. Wysocki
2014-08-26 23:50   ` [PATCH 3/5 v3] x86 / PM: Set IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects Rafael J. Wysocki
2014-08-26 23:51   ` [PATCH 4/5 v3] PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle Rafael J. Wysocki
2014-08-26 23:52   ` [PATCH 5/5 v3] irq / PM: Document rules related to system suspend and interrupts Rafael J. Wysocki
2014-08-28 22:44   ` [PATCH 0/5 v3] irq / PM: Suspend-to-idle wakeup interrupts Thomas Gleixner
2014-08-29  0:54     ` Rafael J. Wysocki
2014-08-29  1:09       ` Thomas Gleixner
2014-09-01 14:18   ` [PATCH 00/13] genirq / PM: Wakeup interrupts handling rework (related to suspend-to-idle) Rafael J. Wysocki
2014-09-01 14:19     ` [PATCH 01/13] PM / sleep: Mechanism for aborting system suspends unconditionally Rafael J. Wysocki
2014-09-01 14:20     ` [PATCH 02/13] genirq: Move suspend/resume logic into irq/pm code Rafael J. Wysocki
2014-09-01 14:21     ` [PATCH 03/13] genirq: Add sanity checks for PM options on shared interrupt lines Rafael J. Wysocki
2014-09-01 14:22     ` [PATCH 04/13] genirq: Make use of pm misfeature accounting Rafael J. Wysocki
2014-09-01 14:22     ` [PATCH 05/13] genirq: Move MASK_ON_SUSPEND handling into suspend_device_irqs() Rafael J. Wysocki
2014-09-01 14:23     ` [PATCH 06/13] genirq: Avoid double loop on suspend Rafael J. Wysocki
2014-09-01 14:24     ` [PATCH 07/13] genirq: Distangle edge handler entry Rafael J. Wysocki
2014-09-01 14:24     ` [PATCH 08/13] genirq: Create helper for flow handler entry check Rafael J. Wysocki
2014-09-01 14:26     ` [PATCH 09/13] genirq: Mark wakeup sources as armed on suspend Rafael J. Wysocki
2014-09-01 14:27     ` [PATCH 10/13] genirq: Simplify wakeup mechanism Rafael J. Wysocki
2014-09-01 14:28     ` [PATCH 11/13] x86 / PM: Set IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects Rafael J. Wysocki
2014-09-01 14:28     ` Rafael J. Wysocki [this message]
2014-09-01 14:29     ` [PATCH 13/13] PM / genirq: Document rules related to system suspend and interrupts Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6235319.4FdiIbbmKj@vostro.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=aubrey.li@intel.com \
    --cc=dtor@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.