Re: [PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Luca Weiss <luca.weiss@fairphone.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Wesley Cheng <quic_wcheng@quicinc.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: Re: [PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster
Date: Fri, 22 Mar 2024 10:31:19 +0000	[thread overview]
Message-ID: <72b68358-6621-46d0-a0f5-b48fdbc54678@linaro.org> (raw)
In-Reply-To: <20240322-fp4-tcpm-v1-3-c5644099d57b@fairphone.com>

On 22/03/2024 08:01, Luca Weiss wrote:
> Add the required DTS node for the USB VBUS output regulator, which is
> available on PM7250B. This will provide the VBUS source to connected
> peripherals.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>   arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index 3bf7cf5d1700..91a046b3529c 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -45,6 +45,12 @@ pmic@PM7250B_SID {
>   		#address-cells = <1>;
>   		#size-cells = <0>;
>   
> +		pm7250b_vbus: usb-vbus-regulator@1100 {
> +			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
> +			status = "disabled";
> +			reg = <0x1100>;
> +		};
> +
>   		pm7250b_temp: temp-alarm@2400 {
>   			compatible = "qcom,spmi-temp-alarm";
>   			reg = <0x2400>;
> 

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>