From: Yanjun Zhu <yanjun.zhu@linux.dev>
To: Jason Gunthorpe <jgg@nvidia.com>
Cc: linux-rdma@vger.kernel.org, Leon Romanovsky <leonro@nvidia.com>
Subject: Re: [GIT PULL] Please pull RDMA subsystem changes
Date: Wed, 14 Dec 2022 10:23:29 +0800 [thread overview]
Message-ID: <7601dc11-f1b5-5488-727a-13b4016c8aa5@linux.dev> (raw)
In-Reply-To: <Y5jpKmpwhTAf+r8B@nvidia.com>
在 2022/12/14 5:05, Jason Gunthorpe 写道:
> Hi Linus,
>
> This cycle saw a new driver called MANA get merged and more fixing to
> the other recently merged drivers. rxe continues to see a lot of
> interest and fixing. Lots more rxe patches already in the works for
> the next cycle.
>
> Thanks,
> Jason
>
> The following changes since commit 76dcd734eca23168cb008912c0f69ff408905235:
>
> Linux 6.1-rc8 (2022-12-04 14:48:12 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git tags/for-linus
>
> for you to fetch changes up to dbc94a0fb81771a38733c0e8f2ea8c4fa6934dc1:
>
> IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces (2022-12-11 11:04:19 +0200)
>
> ----------------------------------------------------------------
> v6.2 merge window pull request
>
> Usual size of updates, a new driver a most of the bulk focusing on rxe:
>
> - Usual typos, style, and language updates
>
> - Driver updates for mlx5, irdma, siw, rts, srp, hfi1, hns, erdma, mlx4, srp
>
> - Lots of RXE updates
> * Improve reply error handling for bad MR operations
> * Code tidying
> * Debug printing uses common loggers
> * Remove half implemented RD related stuff
> * Support IBA's recently defined Atomic Write and Flush operations
>
> - erdma support for atomic operations
>
> - New driver "mana" for Ethernet HW available in Azure VMs. This driver
> only supports DPDK
>
> ----------------------------------------------------------------
> Ajay Sharma (3):
> net: mana: Set the DMA device max segment size
> net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
> net: mana: Define data structures for protection domain and memory registration
>
> Arumugam Kolappan (1):
> RDMA/mlx5: Change debug log level for remote access error syndromes
>
> Bernard Metzler (2):
> RDMA/siw: Fix immediate work request flush to completion queue
> RDMA/siw: Set defined status for work completion with undefined status
>
> Bob Pearson (23):
> RDMA/rxe: Remove redundant header files
> RDMA/rxe: Remove init of task locks from rxe_qp.c
> RDMA/rxe: Removed unused name from rxe_task struct
> RDMA/rxe: Split rxe_run_task() into two subroutines
> RDMA/rxe: Make rxe_do_task static
> RDMA/rxe: Rename task->state_lock to task->lock
> RDMA/rxe: Add ibdev_dbg macros for rxe
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_comp.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_cq.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_mr.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_mw.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_net.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_qp.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_req.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_resp.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_srq.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_verbs.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_av.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_task.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_icrc.c
> RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_mmap.c
> RDMA/rxe: Fix incorrect responder length checking
>
> Chao Leng (1):
> RDMA/cma: Change RoCE packet life time from 18 to 16
>
> Cheng Xu (7):
> RDMA/erdma: Extend access right field of FRMR and REG MR to support atomic
> RDMA/erdma: Report atomic capacity when hardware supports atomic feature
> RDMA/erdma: Implement atomic operations support
> RDMA/erdma: Fix a typo in annotation
> RDMA/erdma: Add a workqueue for WRs reflushing
> RDMA/erdma: Implement the lifecycle of reflushing work for each QP
> RDMA/erdma: Notify the latest PI to FW for reflushing when necessary
>
> Chengchang Tang (5):
> RDMA/hns: Fix AH attr queried by query_qp
> RDMA/hns: Fix PBL page MTR find
> RDMA/hns: Fix page size cap from firmware
> RDMA/hns: Fix error code of CMD
> RDMA/hns: Fix XRC caps on HIP08
>
> Colin Ian King (2):
> RDMA/qib: Remove not-used variable n
> RDMA/qib: Remove not-used variable freeze_cnt
>
> Daisuke Matsuda (4):
> RDMA/rxe: Make responder handle RDMA Read failures
> RDMA/rxe: Handle remote errors in the midst of a Read reply sequence
> RDMA/rxe: Implement packet length validation on responder
> RDMA/rxe: Fix oops with zero length reads
>
> Deming Wang (1):
> IB/uverbs: fix the typo of optional
>
> Dragos Tatulea (1):
> IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
>
> Guoqing Jiang (8):
> RDMA/rtrs-srv: Refactor rtrs_srv_rdma_cm_handler
> RDMA/rtrs-srv: Refactor the handling of failure case in map_cont_bufs
> RDMA/rtrs-srv: Correct the checking of ib_map_mr_sg
> RDMA/rtrs-clt: Correct the checking of ib_map_mr_sg
> RDMA/rtrs-srv: Remove outdated comments from create_con
> RDMA/rtrs: Clean up rtrs_rdma_dev_pd_ops
> RDMA/rtrs-srv: Fix several issues in rtrs_srv_destroy_path_files
> RDMA/rtrs-srv: Remove kobject_del from rtrs_srv_destroy_once_sysfs_root_folders
>
> Jason Gunthorpe (4):
> RDMA/rxe: Do not NULL deref on debugging failure path
> RDMA: Add netdevice_tracker to ib_device_set_netdev()
> Merge tag 'v6.1-rc8' into rdma.git for-next
> RDMA: Add missed netdev_put() for the netdevice_tracker
>
> Jiangshan Yi (1):
> RDMA/opa_vnic: fix spelling typo in comment
>
> Kees Cook (1):
> IB/hfi1: Replace 1-element array with singleton
>
> Leon Romanovsky (3):
> RDMA/core: Fix order of nldev_exit call
> Merge branch 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
> RDMA/mana: Remove redefinition of basic u64 type
>
> Leonid Ravich (1):
> IB/mad: Don't call to function that might sleep while in atomic context
>
> Li Zhijian (15):
> RDMA/core: return -EOPNOSUPP for ODP unsupported device
> RDMA/rxe: Remove unnecessary mr testing
> RDMA/rxe: Make sure requested access is a subset of {mr,mw}->access
> RDMA/rxe: Fix mr->map double free
> RDMA/mlx5: no need to kfree NULL pointer
> RDMA: Extend RDMA user ABI to support flush
> RDMA: Extend RDMA kernel verbs ABI to support flush
> RDMA/rxe: Extend rxe user ABI to support flush
> RDMA/rxe: Allow registering persistent flag for pmem MR only
> RDMA/rxe: Extend rxe packet format to support flush
> RDMA/rxe: Implement RC RDMA FLUSH service in requester side
> RDMA/rxe: Implement flush execution in responder side
> RDMA/rxe: Implement flush completion
> RDMA/cm: Make QP FLUSHABLE for supported device
> RDMA/rxe: Enable RDMA FLUSH capability for rxe device
>
> Long Li (9):
> net: mana: Add support for auxiliary device
> net: mana: Record the physical address for doorbell page region
> net: mana: Handle vport sharing between devices
> net: mana: Export Work Queue functions for use by RDMA driver
> net: mana: Record port number in netdev
> net: mana: Move header files to a common location
> net: mana: Define max values for SGL entries
> net: mana: Define data structures for allocating doorbell page from GDMA
> RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter
>
> Luoyouming (2):
> RDMA/hns: Fix ext_sge num error when post send
> RDMA/hns: Fix incorrect sge nums calculation
>
> Mark Zhang (4):
> RDMA/restrack: Release MR restrack when delete
> RDMA/core: Make sure "ib_port" is valid when access sysfs node
> RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
> RDMA/nldev: Fix failure to send large messages
>
> Maurizio Lombardi (1):
> IB/isert: use the ISCSI_LOGIN_CURRENT_STAGE macro
>
> Max Gurtovoy (2):
> IB/iser: add safety checks for state_mutex lock
> IB/iser: open code iser_disconnected_handler
>
> Mustafa Ismail (4):
> RDMA/irdma: Fix inline for multiple SGE's
> RDMA/irdma: Fix RQ completion opcode
> RDMA/irdma: Do not request 2-level PBLEs for CQ alloc
> RDMA/irdma: Initialize net_type before checking it
>
> Or Har-Toov (1):
> RDMA/nldev: Add NULL check to silence false warnings
>
> Randy Dunlap (1):
> RDMA: Disable IB HW for UML
>
> Sergey Gorenko (1):
> IB/iser: open code iser_conn_state_comp_exch
>
> Shiraz Saleem (1):
> RDMA/irdma: Report the correct link speed
>
> Wang Yufen (2):
> RDMA/hfi1: Fix error return code in parse_platform_config()
> RDMA/srp: Fix error return code in srp_parse_options()
>
> Xiao Yang (9):
> RDMA/rxe: Remove the duplicate assignment of mr->map_shift
> RDMA: Extend RDMA user ABI to support atomic write
> RDMA: Extend RDMA kernel ABI to support atomic write
> RDMA/rxe: Extend rxe user ABI to support atomic write
> RDMA/rxe: Extend rxe packet format to support atomic write
> RDMA/rxe: Make requester support atomic write on RC service
> RDMA/rxe: Make responder support atomic write on RC service
> RDMA/rxe: Implement atomic write completion
> RDMA/rxe: Enable atomic write capability for rxe device
>
> Xiongfeng Wang (1):
> RDMA/hfi: Decrease PCI device reference count in error path
>
> Yang Yang (1):
> IB/hfi1: Switch to netif_napi_add()
>
> Yixing Liu (1):
> RDMA/hns: Fix the gid problem caused by free mr
>
> Yuan Can (1):
> RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
>
> Yunsheng Lin (1):
> RDMA/rxe: cleanup some error handling in rxe_verbs.c
>
> Zhang Xiaoxu (1):
> RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
>
> Zhengchao Shao (1):
> RDMA/hns: fix memory leak in hns_roce_alloc_mr()
>
> Zhu Yanjun (2):
> RDMA/rxe: Remove reliable datagram support
> RDMA/mlx5: Remove not-used IB_FLOW_SPEC_IB define
I do not like this subject. I still like my old one.
With the old one, it suggests that IB_FLOW_SPEC is not supported in MLX5
in subject line.
Thanks and Regards,
Zhu Yanjun
>
> wangjianli (3):
> RDMA/qib: fix repeated words in comments
> RDMA/core: fix repeated words in comments
> RDMA/qedr: fix repeated words in comments
>
> yangx.jy@fujitsu.com (1):
> RDMA/rxe: Remove the member 'type' of struct rxe_mr
>
> ye xingchen (1):
> RDMA/hfi1: use sysfs_emit() to instead of scnprintf()
>
> zhang songyi (1):
> RDMA/mlx4: Remove NULL check before dev_{put, hold}
>
> MAINTAINERS | 10 +
> drivers/infiniband/Kconfig | 3 +
> drivers/infiniband/core/cache.c | 2 +-
> drivers/infiniband/core/cm.c | 13 +-
> drivers/infiniband/core/cma.c | 2 +-
> drivers/infiniband/core/device.c | 10 +-
> drivers/infiniband/core/mad.c | 5 -
> drivers/infiniband/core/nldev.c | 50 +-
> drivers/infiniband/core/restrack.c | 2 -
> drivers/infiniband/core/sysfs.c | 17 +-
> drivers/infiniband/core/uverbs_std_types_qp.c | 2 +-
> drivers/infiniband/hw/Makefile | 1 +
> drivers/infiniband/hw/erdma/erdma.h | 4 +-
> drivers/infiniband/hw/erdma/erdma_cq.c | 2 +
> drivers/infiniband/hw/erdma/erdma_hw.h | 37 +-
> drivers/infiniband/hw/erdma/erdma_main.c | 15 +-
> drivers/infiniband/hw/erdma/erdma_qp.c | 73 ++-
> drivers/infiniband/hw/erdma/erdma_verbs.c | 25 +-
> drivers/infiniband/hw/erdma/erdma_verbs.h | 19 +-
> drivers/infiniband/hw/hfi1/affinity.c | 2 +
> drivers/infiniband/hw/hfi1/driver.c | 2 +-
> drivers/infiniband/hw/hfi1/firmware.c | 6 +
> drivers/infiniband/hw/hfi1/mad.c | 22 +-
> drivers/infiniband/hw/hfi1/netdev_rx.c | 2 +-
> drivers/infiniband/hw/hns/hns_roce_device.h | 3 +
> drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 217 +++++++--
> drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 13 +-
> drivers/infiniband/hw/hns/hns_roce_main.c | 18 +-
> drivers/infiniband/hw/hns/hns_roce_mr.c | 4 +-
> drivers/infiniband/hw/hns/hns_roce_qp.c | 107 ++++-
> drivers/infiniband/hw/irdma/uk.c | 170 ++++---
> drivers/infiniband/hw/irdma/user.h | 20 +-
> drivers/infiniband/hw/irdma/utils.c | 2 +
> drivers/infiniband/hw/irdma/verbs.c | 145 ++----
> drivers/infiniband/hw/irdma/verbs.h | 53 +++
> drivers/infiniband/hw/mana/Kconfig | 10 +
> drivers/infiniband/hw/mana/Makefile | 4 +
> drivers/infiniband/hw/mana/cq.c | 79 ++++
> drivers/infiniband/hw/mana/device.c | 117 +++++
> drivers/infiniband/hw/mana/main.c | 521 +++++++++++++++++++++
> drivers/infiniband/hw/mana/mana_ib.h | 162 +++++++
> drivers/infiniband/hw/mana/mr.c | 197 ++++++++
> drivers/infiniband/hw/mana/qp.c | 506 ++++++++++++++++++++
> drivers/infiniband/hw/mana/wq.c | 115 +++++
> drivers/infiniband/hw/mlx4/main.c | 12 +-
> drivers/infiniband/hw/mlx5/cq.c | 27 +-
> drivers/infiniband/hw/mlx5/fs.c | 1 -
> drivers/infiniband/hw/mlx5/mlx5_ib.h | 4 +
> drivers/infiniband/hw/mlx5/mr.c | 6 +-
> drivers/infiniband/hw/qedr/main.c | 2 +-
> drivers/infiniband/hw/qib/qib_iba6120.c | 7 +-
> drivers/infiniband/hw/qib/qib_tx.c | 5 +-
> drivers/infiniband/hw/qib/qib_user_sdma.c | 2 +-
> drivers/infiniband/sw/rxe/rxe.c | 4 +-
> drivers/infiniband/sw/rxe/rxe.h | 19 +
> drivers/infiniband/sw/rxe/rxe_av.c | 43 +-
> drivers/infiniband/sw/rxe/rxe_comp.c | 47 +-
> drivers/infiniband/sw/rxe/rxe_cq.c | 8 +-
> drivers/infiniband/sw/rxe/rxe_hdr.h | 48 +-
> drivers/infiniband/sw/rxe/rxe_icrc.c | 4 +-
> drivers/infiniband/sw/rxe/rxe_loc.h | 9 +-
> drivers/infiniband/sw/rxe/rxe_mmap.c | 6 +-
> drivers/infiniband/sw/rxe/rxe_mr.c | 122 +++--
> drivers/infiniband/sw/rxe/rxe_mw.c | 23 +-
> drivers/infiniband/sw/rxe/rxe_net.c | 42 +-
> drivers/infiniband/sw/rxe/rxe_opcode.c | 35 ++
> drivers/infiniband/sw/rxe/rxe_opcode.h | 17 +-
> drivers/infiniband/sw/rxe/rxe_param.h | 7 +
> drivers/infiniband/sw/rxe/rxe_qp.c | 98 ++--
> drivers/infiniband/sw/rxe/rxe_req.c | 50 +-
> drivers/infiniband/sw/rxe/rxe_resp.c | 329 +++++++++++--
> drivers/infiniband/sw/rxe/rxe_srq.c | 20 +-
> drivers/infiniband/sw/rxe/rxe_task.c | 52 +-
> drivers/infiniband/sw/rxe/rxe_task.h | 19 +-
> drivers/infiniband/sw/rxe/rxe_verbs.c | 106 ++---
> drivers/infiniband/sw/rxe/rxe_verbs.h | 7 +-
> drivers/infiniband/sw/siw/siw_cq.c | 24 +-
> drivers/infiniband/sw/siw/siw_verbs.c | 40 +-
> drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 7 +
> drivers/infiniband/ulp/iser/iser_verbs.c | 67 ++-
> drivers/infiniband/ulp/isert/ib_isert.c | 5 +-
> drivers/infiniband/ulp/rtrs/rtrs-clt.c | 6 +-
> drivers/infiniband/ulp/rtrs/rtrs-pri.h | 3 -
> drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c | 13 +-
> drivers/infiniband/ulp/rtrs/rtrs-srv.c | 72 ++-
> drivers/infiniband/ulp/rtrs/rtrs.c | 22 +-
> drivers/infiniband/ulp/srp/ib_srp.c | 96 +++-
> drivers/net/ethernet/microsoft/Kconfig | 1 +
> drivers/net/ethernet/microsoft/mana/gdma_main.c | 39 +-
> drivers/net/ethernet/microsoft/mana/hw_channel.c | 6 +-
> drivers/net/ethernet/microsoft/mana/mana_bpf.c | 2 +-
> drivers/net/ethernet/microsoft/mana/mana_en.c | 175 ++++++-
> drivers/net/ethernet/microsoft/mana/mana_ethtool.c | 2 +-
> drivers/net/ethernet/microsoft/mana/shm_channel.c | 2 +-
> .../ethernet/microsoft => include/net}/mana/gdma.h | 153 +++++-
> .../microsoft => include/net}/mana/hw_channel.h | 0
> .../ethernet/microsoft => include/net}/mana/mana.h | 23 +-
> include/net/mana/mana_auxiliary.h | 10 +
> .../microsoft => include/net}/mana/shm_channel.h | 0
> include/rdma/ib_pack.h | 5 +
> include/rdma/ib_verbs.h | 24 +-
> include/rdma/opa_vnic.h | 2 +-
> include/trace/events/ib_mad.h | 13 +-
> include/uapi/rdma/hns-abi.h | 15 +
> include/uapi/rdma/ib_user_ioctl_verbs.h | 3 +
> include/uapi/rdma/ib_user_verbs.h | 21 +
> include/uapi/rdma/mana-abi.h | 66 +++
> include/uapi/rdma/rdma_user_rxe.h | 8 +
> 108 files changed, 3973 insertions(+), 922 deletions(-)
> create mode 100644 drivers/infiniband/hw/mana/Kconfig
> create mode 100644 drivers/infiniband/hw/mana/Makefile
> create mode 100644 drivers/infiniband/hw/mana/cq.c
> create mode 100644 drivers/infiniband/hw/mana/device.c
> create mode 100644 drivers/infiniband/hw/mana/main.c
> create mode 100644 drivers/infiniband/hw/mana/mana_ib.h
> create mode 100644 drivers/infiniband/hw/mana/mr.c
> create mode 100644 drivers/infiniband/hw/mana/qp.c
> create mode 100644 drivers/infiniband/hw/mana/wq.c
> rename {drivers/net/ethernet/microsoft => include/net}/mana/gdma.h (82%)
> rename {drivers/net/ethernet/microsoft => include/net}/mana/hw_channel.h (100%)
> rename {drivers/net/ethernet/microsoft => include/net}/mana/mana.h (95%)
> create mode 100644 include/net/mana/mana_auxiliary.h
> rename {drivers/net/ethernet/microsoft => include/net}/mana/shm_channel.h (100%)
> create mode 100644 include/uapi/rdma/mana-abi.h
next prev parent reply other threads:[~2022-12-14 2:32 UTC|newest]
Thread overview: 260+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-13 21:05 [GIT PULL] Please pull RDMA subsystem changes Jason Gunthorpe
2022-12-14 2:23 ` Yanjun Zhu [this message]
2022-12-14 7:40 ` Leon Romanovsky
2022-12-15 2:18 ` Yanjun Zhu
2022-12-14 18:04 ` pr-tracker-bot
-- strict thread matches above, loose matches on Subject: below --
2024-05-17 19:34 Jason Gunthorpe
2024-05-18 21:05 ` pr-tracker-bot
2024-04-19 17:19 Jason Gunthorpe
2024-04-19 21:07 ` pr-tracker-bot
2024-03-18 16:51 Jason Gunthorpe
2024-03-18 22:47 ` pr-tracker-bot
2024-02-21 0:12 Jason Gunthorpe
2024-02-21 1:03 ` pr-tracker-bot
2024-01-12 1:06 Jason Gunthorpe
2024-01-12 22:20 ` pr-tracker-bot
2023-12-08 14:19 Jason Gunthorpe
2023-12-08 20:45 ` pr-tracker-bot
2023-11-02 23:09 Jason Gunthorpe
2023-11-03 1:26 ` pr-tracker-bot
2023-10-06 18:30 Jason Gunthorpe
2023-10-07 18:12 ` pr-tracker-bot
2023-09-01 0:30 Jason Gunthorpe
2023-09-02 0:00 ` pr-tracker-bot
2023-08-11 23:55 Jason Gunthorpe
2023-08-12 2:55 ` pr-tracker-bot
2023-07-28 18:52 Jason Gunthorpe
2023-07-29 0:27 ` pr-tracker-bot
2023-06-29 0:46 Jason Gunthorpe
2023-06-30 4:10 ` Linus Torvalds
2023-07-03 21:19 ` Jason Gunthorpe
2023-06-30 4:16 ` pr-tracker-bot
2023-06-15 12:39 Jason Gunthorpe
2023-06-16 4:16 ` pr-tracker-bot
2023-05-31 16:58 Jason Gunthorpe
2023-04-28 15:34 Jason Gunthorpe
2023-04-30 0:52 ` pr-tracker-bot
2023-04-14 12:18 Jason Gunthorpe
2023-04-14 17:40 ` pr-tracker-bot
2023-02-24 1:27 Jason Gunthorpe
2023-02-24 23:27 ` pr-tracker-bot
2023-02-10 0:35 Jason Gunthorpe
2023-02-10 1:56 ` pr-tracker-bot
2023-01-20 21:13 Jason Gunthorpe
2023-01-20 22:38 ` pr-tracker-bot
2023-01-07 2:11 Jason Gunthorpe
2023-01-07 18:43 ` pr-tracker-bot
2022-12-17 1:05 Jason Gunthorpe
2022-12-17 14:28 ` pr-tracker-bot
2022-11-02 12:26 Jason Gunthorpe
2022-11-02 18:38 ` pr-tracker-bot
2022-10-06 23:03 Jason Gunthorpe
2022-10-07 19:20 ` pr-tracker-bot
2022-09-09 16:17 Jason Gunthorpe
2022-09-09 19:13 ` pr-tracker-bot
2022-08-19 18:21 Jason Gunthorpe
2022-08-20 17:55 ` pr-tracker-bot
2022-08-04 18:48 Jason Gunthorpe
2022-08-05 3:26 ` pr-tracker-bot
2022-07-18 23:12 Jason Gunthorpe
2022-07-19 0:19 ` pr-tracker-bot
2022-06-30 12:57 Jason Gunthorpe
2022-06-30 17:28 ` pr-tracker-bot
2022-05-26 14:46 Jason Gunthorpe
2022-05-27 4:17 ` pr-tracker-bot
2022-05-06 16:01 Jason Gunthorpe
2022-05-06 16:57 ` Linus Torvalds
2022-05-06 17:06 ` Jason Gunthorpe
2022-05-06 16:58 ` pr-tracker-bot
2022-04-08 19:03 Jason Gunthorpe
2022-04-09 4:39 ` pr-tracker-bot
2022-03-23 19:54 Jason Gunthorpe
2022-03-25 2:47 ` pr-tracker-bot
2022-02-25 21:16 Jason Gunthorpe
2022-02-25 22:15 ` pr-tracker-bot
2022-02-04 23:59 Jason Gunthorpe
2022-02-05 0:31 ` pr-tracker-bot
2022-01-13 18:53 Jason Gunthorpe
2022-01-13 19:19 ` pr-tracker-bot
2022-01-07 1:15 Jason Gunthorpe
2022-01-07 3:05 ` pr-tracker-bot
2021-12-21 1:25 Jason Gunthorpe
2021-12-21 1:37 ` pr-tracker-bot
2021-12-09 21:07 Jason Gunthorpe
2021-12-09 21:23 ` pr-tracker-bot
2021-11-19 17:19 Jason Gunthorpe
2021-11-19 19:46 ` pr-tracker-bot
2021-11-03 13:43 Jason Gunthorpe
2021-11-03 16:01 ` pr-tracker-bot
2021-10-27 12:49 Jason Gunthorpe
2021-10-27 17:44 ` pr-tracker-bot
2021-09-30 1:02 Jason Gunthorpe
2021-09-30 21:34 ` pr-tracker-bot
2021-09-08 23:40 Jason Gunthorpe
2021-09-09 18:54 ` pr-tracker-bot
2021-09-01 23:41 Jason Gunthorpe
2021-09-02 22:42 ` pr-tracker-bot
2021-08-24 14:23 Jason Gunthorpe
2021-08-24 17:01 ` pr-tracker-bot
2021-08-06 13:30 Jason Gunthorpe
2021-08-06 18:27 ` pr-tracker-bot
2021-07-26 23:10 Jason Gunthorpe
2021-07-27 21:17 ` pr-tracker-bot
2021-07-01 1:30 Jason Gunthorpe
2021-07-01 21:58 ` pr-tracker-bot
2021-06-10 12:37 Jason Gunthorpe
2021-06-10 19:18 ` pr-tracker-bot
2021-05-20 14:37 Jason Gunthorpe
2021-05-20 16:47 ` pr-tracker-bot
2021-04-30 16:55 Jason Gunthorpe
2021-04-30 17:01 ` Jason Gunthorpe
2021-05-01 17:20 ` pr-tracker-bot
2021-04-08 19:51 Jason Gunthorpe
2021-04-08 23:40 ` pr-tracker-bot
2021-03-25 18:04 Jason Gunthorpe
2021-03-25 19:13 ` pr-tracker-bot
2021-03-05 23:35 Jason Gunthorpe
2021-03-06 1:35 ` pr-tracker-bot
2021-02-22 14:59 Jason Gunthorpe
2021-02-22 18:37 ` pr-tracker-bot
2021-01-28 14:46 Jason Gunthorpe
2021-01-15 19:21 Jason Gunthorpe
2021-01-15 23:35 ` pr-tracker-bot
2020-12-16 17:57 Jason Gunthorpe
2020-12-16 21:51 ` pr-tracker-bot
2020-12-10 15:50 Jason Gunthorpe
2020-12-10 19:11 ` pr-tracker-bot
2020-11-27 14:00 Jason Gunthorpe
2020-11-27 21:21 ` pr-tracker-bot
2020-11-19 19:29 Jason Gunthorpe
2020-11-19 23:00 ` pr-tracker-bot
2020-11-05 18:16 Jason Gunthorpe
2020-11-05 20:21 ` pr-tracker-bot
2020-10-29 18:41 Jason Gunthorpe
2020-10-29 18:53 ` Linus Torvalds
2020-10-29 19:00 ` pr-tracker-bot
2020-10-16 18:51 Jason Gunthorpe
2020-10-17 18:21 ` Linus Torvalds
2020-10-17 18:42 ` Jason Gunthorpe
2020-10-17 18:22 ` pr-tracker-bot
2020-09-25 12:57 Jason Gunthorpe
2020-09-25 17:48 ` pr-tracker-bot
2020-09-10 23:38 Jason Gunthorpe
2020-09-11 18:37 ` pr-tracker-bot
2020-08-21 14:06 Jason Gunthorpe
2020-08-21 17:16 ` pr-tracker-bot
2020-08-06 18:27 Jason Gunthorpe
2020-08-07 1:55 ` pr-tracker-bot
2020-07-31 15:17 Jason Gunthorpe
2020-07-31 16:45 ` pr-tracker-bot
2020-07-24 17:47 Jason Gunthorpe
2020-07-24 21:40 ` pr-tracker-bot
2020-07-10 17:58 Jason Gunthorpe
2020-07-10 22:10 ` pr-tracker-bot
2020-06-25 17:56 Jason Gunthorpe
2020-06-25 20:15 ` pr-tracker-bot
2020-06-04 19:51 Jason Gunthorpe
2020-06-05 21:15 ` pr-tracker-bot
2020-05-29 14:15 Jason Gunthorpe
2020-05-29 21:10 ` pr-tracker-bot
2020-05-15 19:13 Jason Gunthorpe
2020-05-15 20:15 ` pr-tracker-bot
2020-04-28 19:59 Jason Gunthorpe
2020-04-28 20:40 ` pr-tracker-bot
2020-04-01 23:01 Jason Gunthorpe
2020-04-02 2:05 ` pr-tracker-bot
2020-03-26 17:31 Jason Gunthorpe
2020-03-26 17:50 ` pr-tracker-bot
2020-03-08 0:07 Jason Gunthorpe
2020-03-08 2:00 ` pr-tracker-bot
2020-02-15 21:32 Jason Gunthorpe
2020-02-16 1:20 ` pr-tracker-bot
2020-01-31 15:16 Jason Gunthorpe
2020-01-31 23:10 ` pr-tracker-bot
2020-01-10 2:16 Jason Gunthorpe
2020-01-11 14:45 ` pr-tracker-bot
2019-11-27 0:24 Jason Gunthorpe
2019-11-27 18:19 ` Linus Torvalds
2019-11-27 19:23 ` Jason Gunthorpe
2019-11-27 18:45 ` pr-tracker-bot
2019-11-14 15:16 Jason Gunthorpe
2019-11-14 16:55 ` pr-tracker-bot
2019-10-31 18:22 Jason Gunthorpe
2019-11-01 17:10 ` pr-tracker-bot
2019-10-09 14:28 Jason Gunthorpe
2019-10-09 19:30 ` pr-tracker-bot
2019-09-19 16:34 Jason Gunthorpe
2019-09-21 17:40 ` pr-tracker-bot
2019-07-30 12:15 Jason Gunthorpe
2019-07-30 20:40 ` pr-tracker-bot
2019-07-15 15:26 Jason Gunthorpe
2019-07-16 4:35 ` pr-tracker-bot
2019-06-06 20:14 Jason Gunthorpe
2019-06-07 16:45 ` pr-tracker-bot
2019-05-15 0:46 Jason Gunthorpe
2019-05-15 4:05 ` pr-tracker-bot
2019-05-09 13:37 Jason Gunthorpe
2019-05-09 16:25 ` pr-tracker-bot
2019-04-28 11:52 Jason Gunthorpe
2019-04-28 16:59 ` Linus Torvalds
2019-04-28 23:49 ` Jason Gunthorpe
2019-04-29 0:09 ` Linus Torvalds
2019-04-30 12:53 ` Jason Gunthorpe
2019-04-28 18:05 ` pr-tracker-bot
2019-04-29 6:09 ` Heiko Carstens
2019-04-29 8:40 ` Jason Gunthorpe
2019-04-29 9:00 ` Michal Kubecek
2019-04-29 9:19 ` Leon Romanovsky
2019-04-29 15:42 ` Doug Ledford
2019-04-29 16:29 ` Doug Ledford
2019-04-10 18:46 Jason Gunthorpe
2019-04-10 19:55 ` pr-tracker-bot
2019-03-18 1:04 Jason Gunthorpe
2019-03-19 18:15 ` pr-tracker-bot
2019-03-07 1:34 Jason Gunthorpe
2019-03-10 1:40 ` pr-tracker-bot
2019-02-21 23:07 Jason Gunthorpe
2019-02-22 18:40 ` pr-tracker-bot
2019-02-01 17:41 Jason Gunthorpe
2019-02-01 18:45 ` pr-tracker-bot
2019-01-18 3:56 Jason Gunthorpe
2019-01-18 5:35 ` pr-tracker-bot
2019-01-04 5:00 Jason Gunthorpe
2019-01-06 2:40 ` pr-tracker-bot
2018-12-24 22:16 Jason Gunthorpe
2018-12-29 1:30 ` pr-tracker-bot
2018-11-29 22:52 Jason Gunthorpe
2018-10-25 21:21 Jason Gunthorpe
2018-10-26 14:50 ` Linus Torvalds
2018-09-27 18:24 Jason Gunthorpe
2018-09-27 20:17 ` Greg Kroah-Hartman
2018-09-10 23:04 Jason Gunthorpe
2018-08-22 21:44 Jason Gunthorpe
2018-08-16 21:57 Jason Gunthorpe
2018-08-17 19:31 ` Linus Torvalds
2018-08-17 19:44 ` Linus Torvalds
2018-08-17 20:50 ` Linus Torvalds
2018-08-17 21:16 ` Jason Gunthorpe
2018-08-17 23:56 ` Linus Torvalds
2018-08-17 20:15 ` Jason Gunthorpe
2018-08-17 20:27 ` Linus Torvalds
2018-08-17 21:27 ` Jason Gunthorpe
2018-08-03 16:11 Jason Gunthorpe
2018-07-13 17:13 Jason Gunthorpe
2018-06-20 21:00 Jason Gunthorpe
2018-06-06 21:42 Jason Gunthorpe
2018-06-01 16:47 Jason Gunthorpe
2018-05-24 20:51 Jason Gunthorpe
2018-04-06 16:05 Jason Gunthorpe
2018-05-16 17:39 ` Eugene Syromiatnikov
2018-05-16 17:49 ` Jason Gunthorpe
2018-05-16 18:01 ` Eugene Syromiatnikov
2018-03-29 19:17 Jason Gunthorpe
2018-03-20 23:17 Jason Gunthorpe
2018-01-31 17:47 Jason Gunthorpe
[not found] ` <20180131174735.GA18568-uk2M96/98Pc@public.gmane.org>
2018-01-31 20:11 ` Linus Torvalds
[not found] ` <CA+55aFxmnW-iu1Na3QC8Ci8Q_Qdfn2Ak_9wDB6+A564R=Xn9Ag-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-31 21:04 ` Jason Gunthorpe
[not found] ` <20180131210457.GE23352-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2018-02-01 19:12 ` Linus Torvalds
[not found] ` <CA+55aFxySLoCHcmZgx2PiF6jEazVOSy=2idccRsWqOzmyK2gaw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-01 20:33 ` Jason Gunthorpe
2017-12-28 21:03 Jason Gunthorpe
2017-12-16 17:12 Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7601dc11-f1b5-5488-727a-13b4016c8aa5@linux.dev \
--to=yanjun.zhu@linux.dev \
--cc=jgg@nvidia.com \
--cc=leonro@nvidia.com \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.