All of lore.kernel.org
 help / color / mirror / Atom feed
From: Omar Sandoval <osandov@osandov.com>
To: fstests@vger.kernel.org
Cc: "Darrick J . Wong" <darrick.wong@oracle.com>,
	Eryu Guan <guaneryu@gmail.com>,
	linux-btrfs@vger.kernel.org, linux-xfs@vger.kernel.org,
	kernel-team@fb.com
Subject: [PATCH v2 2/5] generic: enable swapfile tests on Btrfs
Date: Wed, 16 May 2018 13:38:46 -0700	[thread overview]
Message-ID: <80a5002310ab7f06efd9fed76cf268673e631335.1526503000.git.osandov@fb.com> (raw)
In-Reply-To: <cover.1526503000.git.osandov@fb.com>
In-Reply-To: <cover.1526503000.git.osandov@fb.com>

From: Omar Sandoval <osandov@fb.com>

Commit 8c96cfbfe530 ("generic/35[67]: disable swapfile tests on Btrfs")
disabled the swapfile tests on Btrfs because it did not support
swapfiles at the time. Now that we're adding support, we want these
tests to run, but they don't. _require_scratch_swapfile always fails for
Btrfs because swapfiles on Btrfs must be set to nocow. After fixing
that, generic/356 and generic/357 fail for the same reason. After fixing
_that_, both tests still fail because we don't allow reflinking a
non-checksummed extent (which nocow implies) to a checksummed extent.
Add a helper for formatting a swap file which does the chattr, and
chattr the second file, which gets these tests running on kernels
supporting Btrfs swapfiles.

Signed-off-by: Omar Sandoval <osandov@fb.com>
---
 common/rc         | 15 ++++++++++++---
 tests/generic/356 |  7 ++++---
 tests/generic/357 |  6 +++---
 3 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/common/rc b/common/rc
index ffe53236..814b8b5c 100644
--- a/common/rc
+++ b/common/rc
@@ -2222,6 +2222,17 @@ _require_odirect()
 	rm -f $testfile 2>&1 > /dev/null
 }
 
+_format_swapfile() {
+	local fname="$1"
+	local sz="$2"
+
+	touch "$fname"
+	chmod 0600 "$fname"
+	$CHATTR_PROG +C "$fname" > /dev/null 2>&1
+	_pwrite_byte 0x61 0 "$sz" "$fname" >> $seqres.full
+	mkswap -U 27376b42-ff65-42ca-919f-6c9b62292a5c "$fname" >> $seqres.full
+}
+
 # Check that the filesystem supports swapfiles
 _require_scratch_swapfile()
 {
@@ -2231,10 +2242,8 @@ _require_scratch_swapfile()
 	_scratch_mount
 
 	# Minimum size for mkswap is 10 pages
-	local size=$(($(get_page_size) * 10))
+	_format_swapfile "$SCRATCH_MNT/swap" $(($(get_page_size) * 10))
 
-	_pwrite_byte 0x61 0 "$size" "$SCRATCH_MNT/swap" >/dev/null 2>&1
-	mkswap "$SCRATCH_MNT/swap" >/dev/null 2>&1
 	if ! swapon "$SCRATCH_MNT/swap" >/dev/null 2>&1; then
 		_scratch_unmount
 		_notrun "swapfiles are not supported"
diff --git a/tests/generic/356 b/tests/generic/356
index 51eeb652..b4a38f84 100755
--- a/tests/generic/356
+++ b/tests/generic/356
@@ -59,11 +59,12 @@ blocks=160
 blksz=65536
 
 echo "Initialize file"
-echo >> $seqres.full
-_pwrite_byte 0x61 0 $((blocks * blksz)) $testdir/file1 >> $seqres.full
-mkswap -U 27376b42-ff65-42ca-919f-6c9b62292a5c $testdir/file1 >> $seqres.full
+_format_swapfile "$testdir/file1" $((blocks * blksz))
 swapon $testdir/file1
 
+touch "$testdir/file2"
+$CHATTR_PROG +C "$testdir/file2" >/dev/null 2>&1
+
 echo "Try to reflink"
 _cp_reflink $testdir/file1 $testdir/file2 2>&1 | _filter_scratch
 
diff --git a/tests/generic/357 b/tests/generic/357
index 0dd0c10f..9a83a283 100755
--- a/tests/generic/357
+++ b/tests/generic/357
@@ -59,9 +59,9 @@ blocks=160
 blksz=65536
 
 echo "Initialize file"
-echo >> $seqres.full
-_pwrite_byte 0x61 0 $((blocks * blksz)) $testdir/file1 >> $seqres.full
-mkswap -U 27376b42-ff65-42ca-919f-6c9b62292a5c $testdir/file1 >> $seqres.full
+_format_swapfile "$testdir/file1" $((blocks * blksz))
+touch "$testdir/file2"
+$CHATTR_PROG +C "$testdir/file2" >/dev/null 2>&1
 _cp_reflink $testdir/file1 $testdir/file2 2>&1 | _filter_scratch
 
 echo "Try to swapon"
-- 
2.17.0


  parent reply	other threads:[~2018-05-16 20:38 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-16 20:38 [PATCH v2 0/5] xfstests: generic swap file tests Omar Sandoval
2018-05-16 20:38 ` [PATCH v2 1/5] xfstests: create swap group Omar Sandoval
2018-05-16 20:38 ` Omar Sandoval [this message]
2018-05-22  6:41   ` [PATCH v2 2/5] generic: enable swapfile tests on Btrfs Eryu Guan
2018-05-22 23:32     ` Omar Sandoval
2018-05-16 20:38 ` [PATCH v2 3/5] generic: add test for dedupe on an active swapfile Omar Sandoval
2018-05-22  6:47   ` Eryu Guan
2018-05-16 20:38 ` [PATCH v2 4/5] generic: add test for truncate/fpunch of " Omar Sandoval
2018-05-16 20:38 ` [PATCH v2 5/5] generic: test invalid swap file activation Omar Sandoval
2018-05-18 14:37   ` Darrick J. Wong
2018-05-22  6:58     ` Eryu Guan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=80a5002310ab7f06efd9fed76cf268673e631335.1526503000.git.osandov@fb.com \
    --to=osandov@osandov.com \
    --cc=darrick.wong@oracle.com \
    --cc=fstests@vger.kernel.org \
    --cc=guaneryu@gmail.com \
    --cc=kernel-team@fb.com \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.