All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: Dmitry Osipenko <digetx@gmail.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org
Subject: Re: [PATCH v2 15/19] PM / devfreq: tegra: Synchronize IRQ after masking it in hardware
Date: Tue, 16 Apr 2019 16:41:10 +0900	[thread overview]
Message-ID: <81db3a75-2d17-5268-fea5-8b6ed650056f@samsung.com> (raw)
In-Reply-To: <20190415145505.18397-16-digetx@gmail.com>

Hi,

In this patchset,
the patch11 adds new 'disable_interrupt' goto statement
and then patch15 removes 'disable_interrupt' goto statement again.
Actually, it is inefficient.

If you change the order of patches,
you could remove this stuff.

On 19. 4. 15. 오후 11:55, Dmitry Osipenko wrote:
> There is no guarantee that interrupt handling isn't running in parallel,
> hence it is necessary to synchronize IRQ in order to ensure that interrupt
> is indeed disabled.
> 
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/devfreq/tegra-devfreq.c | 33 ++++++++++++++++-----------------
>  1 file changed, 16 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c
> index 46c61af8ca33..cfbfbe28e7bf 100644
> --- a/drivers/devfreq/tegra-devfreq.c
> +++ b/drivers/devfreq/tegra-devfreq.c
> @@ -171,6 +171,8 @@ struct tegra_devfreq {
>  	struct notifier_block	rate_change_nb;
>  
>  	struct tegra_devfreq_device devices[ARRAY_SIZE(actmon_device_configs)];
> +
> +	int irq;
>  };
>  
>  struct tegra_actmon_emc_ratio {
> @@ -432,6 +434,8 @@ static void tegra_actmon_disable_interrupts(struct tegra_devfreq *tegra)
>  	}
>  
>  	actmon_write_barrier(tegra);
> +
> +	synchronize_irq(tegra->irq);
>  }
>  
>  static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
> @@ -603,7 +607,6 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  	struct resource *res;
>  	unsigned int i;
>  	unsigned long rate;
> -	int irq;
>  	int err;
>  
>  	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
> @@ -659,18 +662,18 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  		tegra_actmon_configure_device(tegra, dev);
>  	}
>  
> +	tegra->irq = platform_get_irq(pdev, 0);
> +	if (tegra->irq < 0) {
> +		err = tegra->irq;
> +		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", err);
> +		return err;
> +	}
> +
>  	for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) {
>  		rate = clk_round_rate(tegra->emc_clock, rate);
>  		dev_pm_opp_add(&pdev->dev, rate, 0);
>  	}
>  
> -	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0) {
> -		err = irq;
> -		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", err);
> -		goto remove_opps;
> -	}
> -
>  	platform_set_drvdata(pdev, tegra);
>  
>  	err = devfreq_add_governor(&tegra_devfreq_governor);
> @@ -689,10 +692,11 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  		goto remove_governor;
>  	}
>  
> -	err = request_threaded_irq(irq, NULL, actmon_thread_isr, IRQF_ONESHOT,
> -				   "tegra-devfreq", tegra);
> +	err = devm_request_threaded_irq(&pdev->dev, tegra->irq, NULL,
> +					actmon_thread_isr, IRQF_ONESHOT,
> +					"tegra-devfreq", tegra);
>  	if (err) {
> -		dev_err(&pdev->dev, "Interrupt request failed\n");
> +		dev_err(&pdev->dev, "Interrupt request failed: %d\n", err);
>  		goto remove_devfreq;
>  	}
>  
> @@ -701,14 +705,11 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  	if (err) {
>  		dev_err(&pdev->dev,
>  			"Failed to register rate change notifier\n");
> -		goto disable_interrupt;
> +		goto remove_devfreq;
>  	}
>  
>  	return 0;
>  
> -disable_interrupt:
> -	free_irq(irq, tegra);
> -
>  remove_devfreq:
>  	devfreq_remove_device(tegra->devfreq);
>  
> @@ -727,10 +728,8 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>  static int tegra_devfreq_remove(struct platform_device *pdev)
>  {
>  	struct tegra_devfreq *tegra = platform_get_drvdata(pdev);
> -	int irq = platform_get_irq(pdev, 0);
>  
>  	clk_notifier_unregister(tegra->emc_clock, &tegra->rate_change_nb);
> -	free_irq(irq, tegra);
>  
>  	devfreq_remove_device(tegra->devfreq);
>  	dev_pm_opp_remove_all_dynamic(&pdev->dev);
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

  reply	other threads:[~2019-04-16  7:41 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-15 14:54 [PATCH v2 00/19] NVIDIA Tegra devfreq improvements and Tegra20/30 support Dmitry Osipenko
2019-04-15 14:54 ` [PATCH v2 01/19] PM / devfreq: tegra: Fix kHz to Hz conversion Dmitry Osipenko
2019-04-16  1:45   ` Chanwoo Choi
2019-04-16 13:24     ` Dmitry Osipenko
2019-04-15 14:54 ` [PATCH v2 02/19] PM / devfreq: tegra: Replace readl-writel with relaxed versions Dmitry Osipenko
2019-04-17  1:02   ` Chanwoo Choi
2019-04-15 14:54 ` [PATCH v2 03/19] PM / devfreq: tegra: Don't ignore clk errors Dmitry Osipenko
2019-04-16  1:52   ` Chanwoo Choi
2019-04-16 13:42     ` Dmitry Osipenko
2019-04-15 14:54 ` [PATCH v2 04/19] PM / devfreq: tegra: Don't set EMC clock rate to maximum on probe Dmitry Osipenko
2019-04-16  1:59   ` Chanwoo Choi
2019-04-16 13:44     ` Dmitry Osipenko
2019-04-15 14:54 ` [PATCH v2 05/19] PM / devfreq: tegra: Replace write memory barrier with the read barrier Dmitry Osipenko
2019-04-16  8:00   ` Chanwoo Choi
2019-04-16 13:57     ` Dmitry Osipenko
2019-04-17  0:55       ` Chanwoo Choi
2019-04-15 14:54 ` [PATCH v2 06/19] PM / devfreq: tegra: Fix missed error checking on devfreq initialization failure Dmitry Osipenko
2019-04-16  2:32   ` Chanwoo Choi
2019-04-16 14:29     ` Dmitry Osipenko
2019-04-17  1:01       ` Chanwoo Choi
2019-04-15 14:54 ` [PATCH v2 07/19] PM / devfreq: tegra: Register clk notifier in the end of driver's probe Dmitry Osipenko
2019-04-15 14:54 ` [PATCH v2 08/19] PM / devfreq: tegra: Remove OPP entries on driver removal Dmitry Osipenko
2019-04-15 14:54 ` [PATCH v2 09/19] PM / devfreq: tegra: Change interrupt request order Dmitry Osipenko
2019-04-15 14:54 ` [PATCH v2 10/19] PM / devfreq: tegra: Drop primary interrupt handler Dmitry Osipenko
2019-04-16  5:56   ` Chanwoo Choi
2019-04-16 15:23     ` Dmitry Osipenko
2019-04-17  0:31       ` Chanwoo Choi
2019-04-15 14:54 ` [PATCH v2 11/19] PM / devfreq: tegra: De-initialize properly on driver's probe error Dmitry Osipenko
2019-04-16  6:21   ` Chanwoo Choi
2019-04-15 14:54 ` [PATCH v2 12/19] PM / devfreq: tegra: Avoid inconsistency of current frequency value Dmitry Osipenko
2019-04-16  7:15   ` Chanwoo Choi
2019-04-16 15:40     ` Dmitry Osipenko
2019-04-17  0:35       ` Chanwoo Choi
2019-04-15 14:54 ` [PATCH v2 13/19] PM / devfreq: tegra: Mark ACTMON's governor as immutable Dmitry Osipenko
2019-04-16  7:17   ` Chanwoo Choi
2019-04-15 14:55 ` [PATCH v2 14/19] PM / devfreq: tegra: Move governor registration to driver's probe Dmitry Osipenko
2019-04-16  7:30   ` Chanwoo Choi
2019-04-15 14:55 ` [PATCH v2 15/19] PM / devfreq: tegra: Synchronize IRQ after masking it in hardware Dmitry Osipenko
2019-04-16  7:41   ` Chanwoo Choi [this message]
2019-04-16 15:42     ` Dmitry Osipenko
2019-04-15 14:55 ` [PATCH v2 16/19] PM / devfreq: tegra: Reconfigure hardware on governor's restart Dmitry Osipenko
2019-04-15 14:55 ` [PATCH v2 17/19] PM / devfreq: tegra: Support Tegra30 Dmitry Osipenko
2019-04-16  7:48   ` Chanwoo Choi
2019-04-16 15:49     ` Dmitry Osipenko
2019-04-17  0:28       ` Chanwoo Choi
2019-04-15 14:55 ` [PATCH v2 18/19] PM / devfreq: tegra: Enable COMPILE_TEST for the driver Dmitry Osipenko
2019-04-16  7:43   ` Chanwoo Choi
2019-04-16 15:52     ` Dmitry Osipenko
2019-04-17  0:27       ` Chanwoo Choi
2019-04-15 14:55 ` [PATCH v2 19/19] PM / devfreq: Introduce driver for NVIDIA Tegra20 Dmitry Osipenko
2019-04-16  8:31   ` Chanwoo Choi
2019-04-16 16:11     ` Dmitry Osipenko
2019-04-17  0:26       ` Chanwoo Choi
2019-04-17  9:36         ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=81db3a75-2d17-5268-fea5-8b6ed650056f@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=thierry.reding@gmail.com \
    --cc=tomeu.vizoso@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.