From: Ramsay Jones <ramsay@ramsayjones.plus.com>
To: "Đoàn Trần Công Danh" <congdanhqx@gmail.com>, git@vger.kernel.org
Subject: Re: [PATCH 0/4] fix make sparse warning
Date: Fri, 24 Apr 2020 00:10:25 +0100 [thread overview]
Message-ID: <86ef24e2-3ab6-5e9c-900b-0eb4dbc1bb04@ramsayjones.plus.com> (raw)
In-Reply-To: <cover.1587648870.git.congdanhqx@gmail.com>
On 23/04/2020 14:47, Đoàn Trần Công Danh wrote:
> It's happened that I tried to run make check on project that support autoconf.
I try to ignore autoconf as much as possible, so I don't know why people
who use it regularly seem to expect a 'make check' target (is that anything
to do with ./config.status --recheck?).
> Git's Makefile told me to run `make sparse` instead.
In which case, you must have had sparse installed, otherwise you would
have been directed to 'make test'. [See commit 912f9980d2 ("Makefile: help
people who run 'make check' by mistake", 2008-11-11)]
The 'check' target was introduced in commit 44c9e8594e ("Fix up header file
dependencies and add sparse checking rules", 2005-07-03). As you can see,
that target has nothing to do with autoconf/configure.
Exactly a year later, support for autoconf tools was added in commit
556677144b ("autoconf: Use autoconf to write installation directories to config.mak.autogen", 2006-07-03). This provides an 'alternative' to just
using the Makefile (which is the _primary_ method used to build git).
I suspect that the majority of git developers don't use the autoconf
tools (I have no numbers, just gut feeling).
I added the 'sparse' target in commit 0bcd9ae85d ("sparse: Fix errors due to missing target-specific variables", 2011-04-21). After nine years, we could
perhaps just drop the 'check' target altogether? dunno.
> I /think/ if we have a rule in Makefile, we should adhere to it.
Hmm, do you mean that 'make check' should be _reserved_ for autoconf use?
[fun fact: the test target in the sparse Makefile is 'check' :-D ]
> I also fix another change in ds/blame-on-bloom, which I think it's worth to
> fix, see: <20200423133937.GA1984@danh.dev>
Yes, looks good.
> This series is developed from latest master.
I have some comments on the patches (I'm running out of time here,
so I may not get to them till tomorrow).
> It's conflicted when merge down next and pu.
>
> For next, please ignore the conflict with fmt-merge-msg.c and
> apply [5/4] instead.
>
> For pu, reftable.c has too much warnings, I'm too lazy to look into it.
For those interested, the 'too much warnings' on the 'pu' branch looks
like (for pu@faf094bf11):
$ make sparse >psp-out 2>&1
$ diff nsp-out psp-out
154a155
> SP refs/reftable-backend.c
406a408
> SP t/helper/test-proc-receive.c
447a450,511
> SP reftable/basics.c
> reftable/basics.c:157:6: warning: symbol 'reftable_malloc_ptr' was not declared. Should it be static?
> reftable/basics.c:158:6: warning: symbol 'reftable_realloc_ptr' was not declared. Should it be static?
> reftable/basics.c:159:6: warning: symbol 'reftable_free_ptr' was not declared. Should it be static?
> SP reftable/block.c
> SP reftable/bytes.c
> SP reftable/file.c
> reftable/file.c:57:37: warning: symbol 'file_vtable' was not declared. Should it be static?
> SP reftable/iter.c
> reftable/iter.c:32:33: warning: symbol 'empty_vtable' was not declared. Should it be static?
> reftable/iter.c:61:31: warning: Using plain integer as NULL pointer
> reftable/iter.c:69:31: warning: Using plain integer as NULL pointer
> reftable/iter.c:96:57: warning: Using plain integer as NULL pointer
> reftable/iter.c:124:33: warning: symbol 'filtering_ref_iterator_vtable' was not declared. Should it be static?
> reftable/iter.c:224:33: warning: symbol 'indexed_table_ref_iter_vtable' was not declared. Should it be static?
> SP reftable/merged.c
> reftable/merged.c:141:33: warning: symbol 'merged_iter_vtable' was not declared. Should it be static?
> reftable/merged.c:283:31: warning: Using plain integer as NULL pointer
> reftable/merged.c:296:31: warning: Using plain integer as NULL pointer
> SP reftable/pq.c
> SP reftable/reader.c
> reftable/reader.c:180:42: warning: Using plain integer as NULL pointer
> reftable/reader.c:181:42: warning: Using plain integer as NULL pointer
> reftable/reader.c:284:41: warning: Using plain integer as NULL pointer
> reftable/reader.c:360:44: warning: Using plain integer as NULL pointer
> reftable/reader.c:396:33: warning: symbol 'table_iter_vtable' was not declared. Should it be static?
> reftable/reader.c:450:36: warning: Using plain integer as NULL pointer
> reftable/reader.c:498:42: warning: Using plain integer as NULL pointer
> reftable/reader.c:500:44: warning: Using plain integer as NULL pointer
> reftable/reader.c:501:42: warning: Using plain integer as NULL pointer
> reftable/reader.c:502:36: warning: Using plain integer as NULL pointer
> reftable/reader.c:565:34: warning: Using plain integer as NULL pointer
> reftable/reader.c:610:31: warning: Using plain integer as NULL pointer
> reftable/reader.c:623:31: warning: Using plain integer as NULL pointer
> reftable/reader.c:669:36: warning: Using plain integer as NULL pointer
> reftable/reader.c:670:42: warning: Using plain integer as NULL pointer
> reftable/reader.c:671:35: warning: Using plain integer as NULL pointer
> reftable/reader.c:672:35: warning: Using plain integer as NULL pointer
> SP reftable/record.c
> reftable/record.c:556:22: warning: symbol 'obj_record_vtable' was not declared. Should it be static?
> reftable/record.c:839:22: warning: symbol 'reftable_log_record_vtable' was not declared. Should it be static?
> reftable/record.c:961:22: warning: symbol 'index_record_vtable' was not declared. Should it be static?
> SP reftable/slice.c
> reftable/slice.c:180:37: warning: symbol 'slice_vtable' was not declared. Should it be static?
> reftable/slice.c:200:37: warning: symbol 'malloc_vtable' was not declared. Should it be static?
> reftable/slice.c:204:30: warning: symbol 'malloc_block_source_instance' was not declared. Should it be static?
> SP reftable/stack.c
> reftable/stack.c:157:62: warning: Using plain integer as NULL pointer
> reftable/stack.c:667:41: warning: Using plain integer as NULL pointer
> reftable/stack.c:668:44: warning: Using plain integer as NULL pointer
> reftable/stack.c:669:44: warning: Using plain integer as NULL pointer
> reftable/stack.c:1085:41: warning: Using plain integer as NULL pointer
> reftable/stack.c:1111:41: warning: Using plain integer as NULL pointer
> SP reftable/tree.c
> SP reftable/writer.c
> reftable/writer.c:231:31: warning: Using plain integer as NULL pointer
> reftable/writer.c:299:39: warning: Using plain integer as NULL pointer
> reftable/writer.c:347:47: warning: Using plain integer as NULL pointer
> reftable/writer.c:426:31: warning: Using plain integer as NULL pointer
> reftable/writer.c:468:45: warning: Using plain integer as NULL pointer
> reftable/writer.c:584:11: warning: symbol 'debug' was not declared. Should it be static?
> SP reftable/zlib-compat.c
Also, my static-check perl script says the following symbols are not
used outside the file which defines them (so they could be marked static):
$ ./static-check.pl >psc
$ diff nsc psc
71a72,136
> reftable/basics.o - reftable_free_ptr
> reftable/basics.o - reftable_malloc_ptr
> reftable/basics.o - reftable_realloc_ptr
> reftable/basics.o - reftable_set_alloc
> reftable/block.o - block_reader_seek
> reftable/block.o - block_writer_register_restart
> reftable/file.o - file_vtable
> reftable/iter.o - empty_vtable
> reftable/iter.o - filtering_ref_iterator_vtable
> reftable/iter.o - indexed_table_ref_iter_vtable
> reftable/merged.o - merged_iter_vtable
> reftable/merged.o - reftable_merged_table_max_update_index
> reftable/merged.o - reftable_merged_table_min_update_index
> reftable/merged.o - reftable_merged_table_seek_log_at
> reftable/pq.o - merged_iter_pqueue_check
> reftable/pq.o - pq_less
> reftable/reader.o - block_source_close
> reftable/reader.o - block_source_read_block
> reftable/reader.o - block_source_size
> reftable/reader.o - init_reader
> reftable/reader.o - reftable_reader_hash_id
> reftable/reader.o - reftable_reader_refs_for
> reftable/reader.o - reftable_reader_seek_log
> reftable/reader.o - reftable_reader_seek_log_at
> reftable/reader.o - table_iter_vtable
> reftable/record.o - get_var_int
> reftable/record.o - index_record_vtable
> reftable/record.o - obj_record_vtable
> reftable/record.o - put_var_int
> reftable/record.o - record_as_log
> reftable/record.o - record_as_ref
> reftable/record.o - reftable_log_record_equal
> reftable/record.o - reftable_log_record_print
> reftable/record.o - reftable_log_record_vtable
> reftable/record.o - reftable_ref_record_equal
> reftable/record.o - reftable_ref_record_print
> reftable/record.o - reftable_ref_record_vtable
> reftable/slice.o - block_source_from_slice
> reftable/slice.o - malloc_block_source_instance
> reftable/slice.o - malloc_vtable
> reftable/slice.o - slice_equal
> reftable/slice.o - slice_vtable
> reftable/slice.o - slice_write
> reftable/slice.o - slice_write_void
> reftable/slice.o - slice_yield
> reftable/stack.o - fastlog2
> reftable/stack.o - read_lines
> reftable/stack.o - reftable_addition_add
> reftable/stack.o - reftable_addition_close
> reftable/stack.o - reftable_addition_commit
> reftable/stack.o - reftable_stack_auto_compact
> reftable/stack.o - reftable_stack_compaction_stats
> reftable/stack.o - reftable_stack_destroy
> reftable/stack.o - reftable_stack_new_addition
> reftable/stack.o - reftable_stack_read_log
> reftable/stack.o - reftable_stack_reload
> reftable/stack.o - sizes_to_segments
> reftable/stack.o - stack_try_add
> reftable/stack.o - stack_write_compact
> reftable/stack.o - suggest_compaction_segment
> reftable/writer.o - debug
> reftable/writer.o - writer_clear_index
> reftable/writer.o - writer_finish_public_section
> reftable/writer.o - writer_flush_block
> reftable/writer.o - writer_stats
Note: I have not looked at any of the reftable patches/files.
ATB,
Ramsay Jones
next prev parent reply other threads:[~2020-04-23 23:18 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-23 13:47 [PATCH 0/4] fix make sparse warning Đoàn Trần Công Danh
2020-04-23 13:47 ` [PATCH 1/4] C: s/0/NULL/ for pointer type Đoàn Trần Công Danh
2020-04-24 0:39 ` Ramsay Jones
2020-04-24 0:54 ` Junio C Hamano
2020-04-24 1:09 ` Danh Doan
2020-04-24 1:54 ` Junio C Hamano
2020-05-14 21:37 ` Luc Van Oostenryck
2020-04-23 13:47 ` [PATCH 2/4] compat/regex: silence `make sparse` warning Đoàn Trần Công Danh
2020-04-24 0:51 ` Ramsay Jones
2020-04-24 1:04 ` Danh Doan
2020-04-23 13:47 ` [PATCH 3/4] graph.c: limit linkage of internal variable Đoàn Trần Công Danh
2020-04-24 0:52 ` Ramsay Jones
2020-04-23 13:47 ` [PATCH 4/4] progress.c: silence cgcc suggestion about internal linkage Đoàn Trần Công Danh
2020-04-24 0:58 ` Ramsay Jones
2020-04-24 5:54 ` Jeff King
2020-04-23 13:47 ` [PATCH 5/4] fmt-merge-msg.c: fix `make sparse` on next Đoàn Trần Công Danh
2020-04-23 23:10 ` Ramsay Jones [this message]
2020-04-23 23:58 ` [PATCH 0/4] fix make sparse warning Danh Doan
2020-04-24 16:38 ` Ramsay Jones
2020-04-24 15:12 ` [PATCH v2 0/4] Fix Sparse Warning Đoàn Trần Công Danh
2020-04-24 15:12 ` [PATCH v2 1/4] test-parse-pathspec-file.c: s/0/NULL/ for pointer type Đoàn Trần Công Danh
2020-04-24 15:12 ` [PATCH v2 2/4] compat/regex: include alloca.h before undef it Đoàn Trần Công Danh
2020-04-24 16:56 ` Ramsay Jones
2020-04-24 17:09 ` Danh Doan
2020-04-24 18:29 ` Ramsay Jones
2020-04-24 22:34 ` Danh Doan
2020-04-25 20:28 ` Ramsay Jones
2020-04-26 0:54 ` Danh Doan
2020-04-26 1:10 ` Danh Doan
2020-04-26 16:17 ` Ramsay Jones
2020-04-26 19:38 ` Ramsay Jones
2020-04-26 22:37 ` Junio C Hamano
2020-04-27 1:08 ` Danh Doan
2020-04-27 16:28 ` Ramsay Jones
2020-04-27 16:46 ` Danh Doan
2020-04-27 17:21 ` Ramsay Jones
2020-04-24 15:12 ` [PATCH v2 3/4] graph.c: limit linkage of internal variable Đoàn Trần Công Danh
2020-04-24 15:12 ` [PATCH v2 4/4] progress.c: silence cgcc suggestion about internal linkage Đoàn Trần Công Danh
2020-04-24 16:40 ` [PATCH v2 0/4] Fix Sparse Warning Ramsay Jones
2020-04-25 13:13 ` [PATCH 0/4] fix make sparse warning Johannes Schindelin
2020-04-26 3:32 ` Danh Doan
2020-04-26 16:24 ` Ramsay Jones
2020-05-01 20:02 ` Johannes Schindelin
2020-04-27 14:22 ` [PATCH v3 0/4] Partial fix `make sparse` Đoàn Trần Công Danh
2020-04-27 14:22 ` [PATCH v3 1/4] test-parse-pathspec-file.c: s/0/NULL/ for pointer type Đoàn Trần Công Danh
2020-04-27 14:22 ` [PATCH v3 2/4] compat/regex: move stdlib.h up in inclusion chain Đoàn Trần Công Danh
2020-04-27 16:41 ` Ramsay Jones
2020-04-27 14:22 ` [PATCH v3 3/4] graph.c: limit linkage of internal variable Đoàn Trần Công Danh
2020-04-27 14:22 ` [PATCH v3 4/4] progress.c: silence cgcc suggestion about internal linkage Đoàn Trần Công Danh
2020-05-01 20:09 ` Johannes Schindelin
2020-04-27 16:35 ` [PATCH v3 0/4] Partial fix `make sparse` Ramsay Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86ef24e2-3ab6-5e9c-900b-0eb4dbc1bb04@ramsayjones.plus.com \
--to=ramsay@ramsayjones.plus.com \
--cc=congdanhqx@gmail.com \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.