All of lore.kernel.org
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.com>
To: lustre-devel@lists.lustre.org
Subject: [lustre-devel] [PATCH 00/10] lustre: lnet: fixes for non-x86 systems
Date: Thu, 18 Oct 2018 15:48:28 +1100	[thread overview]
Message-ID: <87va5zc12b.fsf@notabene.neil.brown.name> (raw)
In-Reply-To: <1539543332-28679-1-git-send-email-jsimmons@infradead.org>

On Sun, Oct 14 2018, James Simmons wrote:

> These are the required patches to make LNet work with non-x86
> platforms like ARM or Power8. The tunables map_on_demand and
> concurrent_sends assumed pages were 4K in size which is not
> correct. Massively reworked to basically defunct those tunables.
> Also the size of the LNet packet was always 256 pages but when
> the page size is 64K like some ARM or Power8 systems the maximum
> LNet message sent was 16MB not 1MB which is what is expected.
> Fixing up the RDMA handling in the ko2iblnd driver also resolved
> some performance issues.

Thanks.
I've applied this series, but I've still suspicious of that little
section in patch 3.
I hope that can be clarified, or fixed, before I feel the need to  move
the series from 'lustre-testing' to 'lustre'.

Thanks,
NeilBrown


>
> Alexey Lyashkov (1):
>   lustre: lnd: use less CQ entries for each connection
>
> Amir Shehata (6):
>   lustre: lnd: set device capabilities
>   lustre: o2iblnd: use IB_MR_TYPE_SG_GAPS
>   lustre: lnd: rework map_on_demand behavior
>   lustre: lnd: calculate qp max_send_wrs properly
>   lustre: lnd: remove concurrent_sends tunable
>   lustre: lnd: correct WR fast reg accounting
>
> Dmitry Eremin (1):
>   lustre: o2iblnd: limit cap.max_send_wr for MLX5
>
> James Simmons (1):
>   lustre: lnet: make LNET_MAX_IOV dependent on page size
>
> John L. Hammond (1):
>   lustre: o2ib: use splice in kiblnd_peer_connect_failed()
>
>  .../staging/lustre/include/linux/lnet/lib-types.h  |  10 +-
>  .../lustre/include/uapi/linux/lnet/lnet-types.h    |   3 -
>  drivers/staging/lustre/lnet/Kconfig                |  10 --
>  .../staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c    | 138 +++++++++++++++------
>  .../staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h    |  68 +++-------
>  .../staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c | 133 ++++++++++++++------
>  .../lustre/lnet/klnds/o2iblnd/o2iblnd_modparams.c  |  85 ++++++-------
>  drivers/staging/lustre/lustre/include/lustre_net.h |   1 +
>  8 files changed, 256 insertions(+), 192 deletions(-)
>
> -- 
> 1.8.3.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.lustre.org/pipermail/lustre-devel-lustre.org/attachments/20181018/f00ad4b3/attachment.sig>

  parent reply	other threads:[~2018-10-18  4:48 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-14 18:55 [lustre-devel] [PATCH 00/10] lustre: lnet: fixes for non-x86 systems James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 01/10] lustre: lnd: set device capabilities James Simmons
2018-10-17  5:54   ` NeilBrown
2018-10-20 16:58     ` James Simmons
2018-10-22  2:48       ` NeilBrown
2018-10-23 23:04         ` James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 02/10] lustre: o2iblnd: use IB_MR_TYPE_SG_GAPS James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 03/10] lustre: lnd: rework map_on_demand behavior James Simmons
2018-10-17  6:11   ` NeilBrown
2018-10-20 17:06     ` James Simmons
2018-10-22  3:09       ` NeilBrown
2018-10-14 18:55 ` [lustre-devel] [PATCH 04/10] lustre: lnd: use less CQ entries for each connection James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 05/10] lustre: o2iblnd: limit cap.max_send_wr for MLX5 James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 06/10] lustre: lnd: calculate qp max_send_wrs properly James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 07/10] lustre: lnd: remove concurrent_sends tunable James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 08/10] lustre: lnd: correct WR fast reg accounting James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 09/10] lustre: o2ib: use splice in kiblnd_peer_connect_failed() James Simmons
2018-10-14 18:55 ` [lustre-devel] [PATCH 10/10] lustre: lnet: make LNET_MAX_IOV dependent on page size James Simmons
2018-10-18  4:48 ` NeilBrown [this message]
2018-10-20 19:00   ` [lustre-devel] [PATCH 00/10] lustre: lnet: fixes for non-x86 systems James Simmons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87va5zc12b.fsf@notabene.neil.brown.name \
    --to=neilb@suse.com \
    --cc=lustre-devel@lists.lustre.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.