Re: [PATCH v2 2/2] mm: Remember young/dirty bit for page migrations

From: Nadav Amit <nadav.amit@gmail.com>
To: Peter Xu <peterx@redhat.com>
Cc: Linux MM <linux-mm@kvack.org>,
	linux-kernel@vger.kernel.org, Huang Ying <ying.huang@intel.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	David Hildenbrand <david@redhat.com>,
	Minchan Kim <minchan@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Vlastimil Babka <vbabka@suse.cz>, Hugh Dickins <hughd@google.com>,
	Andi Kleen <andi.kleen@intel.com>,
	"Kirill A . Shutemov" <kirill@shutemov.name>
Subject: Re: [PATCH v2 2/2] mm: Remember young/dirty bit for page migrations
Date: Thu, 4 Aug 2022 15:40:57 -0700	[thread overview]
Message-ID: <A84CB6A0-86C8-4CAB-A977-47495D877C31@gmail.com> (raw)
In-Reply-To: <20220804203952.53665-3-peterx@redhat.com>

On Aug 4, 2022, at 1:39 PM, Peter Xu <peterx@redhat.com> wrote:

> When page migration happens, we always ignore the young/dirty bit settings
> in the old pgtable, and marking the page as old in the new page table using
> either pte_mkold() or pmd_mkold(), and keeping the pte clean.
> 
> That's fine from functional-wise, but that's not friendly to page reclaim
> because the moving page can be actively accessed within the procedure.  Not
> to mention hardware setting the young bit can bring quite some overhead on
> some systems, e.g. x86_64 needs a few hundreds nanoseconds to set the bit.
> The same slowdown problem to dirty bits when the memory is first written
> after page migration happened.
> 
> Actually we can easily remember the A/D bit configuration and recover the
> information after the page is migrated.  To achieve it, define a new set of
> bits in the migration swap offset field to cache the A/D bits for old pte.
> Then when removing/recovering the migration entry, we can recover the A/D
> bits even if the page changed.
> 
> One thing to mention is that here we used max_swapfile_size() to detect how
> many swp offset bits we have, and we'll only enable this feature if we know
> the swp offset can be big enough to store both the PFN value and the young
> bit.  Otherwise the A/D bits are dropped like before.
> 
> Signed-off-by: Peter Xu <peterx@redhat.com>
> ---
> include/linux/swapops.h | 91 +++++++++++++++++++++++++++++++++++++++++
> mm/huge_memory.c        | 26 +++++++++++-
> mm/migrate.c            |  6 ++-
> mm/migrate_device.c     |  4 ++
> mm/rmap.c               |  5 ++-
> 5 files changed, 128 insertions(+), 4 deletions(-)
> 
> diff --git a/include/linux/swapops.h b/include/linux/swapops.h
> index 1d17e4bb3d2f..34aa448ac6ee 100644
> --- a/include/linux/swapops.h
> +++ b/include/linux/swapops.h
> @@ -8,6 +8,8 @@
> 
> #ifdef CONFIG_MMU
> 
> +#include <linux/swapfile.h>

Shouldn’t the ifdef go into linux/swapfile.h if that’s the right thing to do
to prevent others from mistakenly including it?

> +
> /*
>  * swapcache pages are stored in the swapper_space radix tree.  We want to
>  * get good packing density in that tree, so the index should be dense in
> @@ -35,6 +37,24 @@
> #endif
> #define SWP_PFN_MASK			((1UL << SWP_PFN_BITS) - 1)
> 
> +/**
> + * Migration swap entry specific bitfield definitions.
> + *
> + * @SWP_MIG_YOUNG_BIT: Whether the page used to have young bit set
> + * @SWP_MIG_DIRTY_BIT: Whether the page used to have dirty bit set
> + *
> + * Note: these bits will be stored in migration entries iff there're enough
> + * free bits in arch specific swp offset.  By default we'll ignore A/D bits
> + * when migrating a page.  Please refer to migration_entry_supports_ad()
> + * for more information.
> + */
> +#define SWP_MIG_YOUNG_BIT		(SWP_PFN_BITS)
> +#define SWP_MIG_DIRTY_BIT		(SWP_PFN_BITS + 1)
> +#define SWP_MIG_TOTAL_BITS		(SWP_PFN_BITS + 2)
> +
> +#define SWP_MIG_YOUNG			(1UL << SWP_MIG_YOUNG_BIT)
> +#define SWP_MIG_DIRTY			(1UL << SWP_MIG_DIRTY_BIT)

Any reason not to use BIT(x) ?

> +
> static inline bool is_pfn_swap_entry(swp_entry_t entry);
> 
> /* Clear all flags but only keep swp_entry_t related information */
> @@ -265,6 +285,57 @@ static inline swp_entry_t make_writable_migration_entry(pgoff_t offset)
> 	return swp_entry(SWP_MIGRATION_WRITE, offset);
> }
> 
> +/*
> + * Returns whether the host has large enough swap offset field to support
> + * carrying over pgtable A/D bits for page migrations.  The result is
> + * pretty much arch specific.
> + */
> +static inline bool migration_entry_supports_ad(void)
> +{
> +	/*
> +	 * max_swapfile_size() returns the max supported swp-offset plus 1.
> +	 * We can support the migration A/D bits iff the pfn swap entry has
> +	 * the offset large enough to cover all of them (PFN, A & D bits).
> +	 */
> +#ifdef CONFIG_SWAP
> +	return max_swapfile_size() >= (1UL << SWP_MIG_TOTAL_BITS);

This is an actual a function call (unless LTO has some trick). A bit of a
shame it cannot be at least memoized.

Or at least mark max_swapfile_size() as __attribute_const__ so it would not
be called twice for make_migration_entry_young() and
make_migration_entry_dirty().

> +#else
> +	return false;
> +#endif
> +}
> +
> +static inline swp_entry_t make_migration_entry_young(swp_entry_t entry)
> +{
> +	if (migration_entry_supports_ad())
> +		return swp_entry(swp_type(entry),
> +				 swp_offset(entry) | SWP_MIG_YOUNG);
> +	return entry;
> +}
> +
> +static inline bool is_migration_entry_young(swp_entry_t entry)
> +{
> +	if (migration_entry_supports_ad())
> +		return swp_offset(entry) & SWP_MIG_YOUNG;
> +	/* Keep the old behavior of aging page after migration */
> +	return false;
> +}
> +
> +static inline swp_entry_t make_migration_entry_dirty(swp_entry_t entry)
> +{
> +	if (migration_entry_supports_ad())
> +		return swp_entry(swp_type(entry),
> +				 swp_offset(entry) | SWP_MIG_DIRTY);
> +	return entry;
> +}
> +
> +static inline bool is_migration_entry_dirty(swp_entry_t entry)
> +{
> +	if (migration_entry_supports_ad())
> +		return swp_offset(entry) & SWP_MIG_YOUNG_BIT;

Shouldn’t it be SWP_MIG_DIRTY ?

> +	/* Keep the old behavior of clean page after migration */
> +	return false;
> +}
> +
> extern void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep,
> 					spinlock_t *ptl);
> extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
> @@ -311,6 +382,26 @@ static inline int is_readable_migration_entry(swp_entry_t entry)
> 	return 0;
> }
> 
> +static inline swp_entry_t make_migration_entry_young(swp_entry_t entry)
> +{
> +	return entry;
> +}
> +
> +static inline bool is_migration_entry_young(swp_entry_t entry)
> +{
> +	return false;
> +}
> +
> +static inline swp_entry_t make_migration_entry_dirty(swp_entry_t entry)
> +{
> +	return entry;
> +}
> +
> +static inline bool is_migration_entry_dirty(swp_entry_t entry)
> +{
> +	return false;
> +}
> +
> #endif

While at it, can you change to:

#endif /* CONFIG_MIGRATION */

[ these ifdefs burn my eyes ]

Other than that looks good.

Thanks,
Nadav