From: Naresh Kamboju <naresh.kamboju@linaro.org>
To: open list <linux-kernel@vger.kernel.org>,
Linux-Next Mailing List <linux-next@vger.kernel.org>,
lkft-triage@lists.linaro.org, linux-mm <linux-mm@kvack.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Arnd Bergmann <arnd@arndb.de>,
Anders Roxell <anders.roxell@linaro.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
Petr Mladek <pmladek@suse.com>,
Steven Rostedt <rostedt@goodmis.org>,
Naoya Horiguchi <naoya.horiguchi@nec.com>
Subject: next-20230321: arm64: Unable to handle kernel paging request at virtual address
Date: Tue, 21 Mar 2023 11:42:56 +0530 [thread overview]
Message-ID: <CA+G9fYsTk0GPOTEMm1KG2iJvMLG0SqUfG0JSenRYFHuOQTpuxw@mail.gmail.com> (raw)
The following kernel crash was noticed on arm64 Juno-r2 and Raspberry Pi 4
Model B on Linux next-20230321.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
log:
----
[ 3.071500] Unable to handle kernel paging request at virtual
address 0000000000001000
[ 3.079432] Mem abort info:
[ 3.082225] ESR = 0x0000000096000004
[ 3.085977] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3.091295] SET = 0, FnV = 0
[ 3.094350] EA = 0, S1PTW = 0
[ 3.097491] FSC = 0x04: level 0 translation fault
[ 3.102373] Data abort info:
[ 3.105252] ISV = 0, ISS = 0x00000004
[ 3.109089] CM = 0, WnR = 0
[ 3.112055] [0000000000001000] user address but active_mm is swapper
[ 3.114230] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 3.118418] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 3.118426] Modules linked in:
[ 3.134717] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
6.3.0-rc3-next-20230321 #1
[ 3.142126] Hardware name: ARM Juno development board (r2) (DT)
[ 3.148052] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.155027] pc : string (lib/vsprintf.c:644 lib/vsprintf.c:726)
[ 3.158443] lr : vsnprintf (lib/vsprintf.c:2817)
[ 3.162196] sp : ffff80000b34b8f0
[ 3.165511] x29: ffff80000b34b8f0 x28: ffff800009d7b1ca x27: ffff80000b34bab0
[ 3.172666] x26: ffff800009d7b1ca x25: 0000000000000020 x24: 0000000000000008
[ 3.179820] x23: 00000000ffffffd8 x22: ffff8000099858a0 x21: ffff80000b34bc30
[ 3.186973] x20: ffff80000b34ba90 x19: ffff80000b34ba98 x18: 000000003c98bfdd
[ 3.194127] x17: 000000000000001c x16: 00000000eec48da2 x15: 00000000a9dbdd17
[ 3.201280] x14: ffff80000b0242e8 x13: 0000000057a049ef x12: 00000000cfa47237
[ 3.208433] x11: 0000000000000001 x10: 00000000bd5b8780 x9 : ffff80000812cbec
[ 3.215586] x8 : 00000000ffffffff x7 : 0000000000000002 x6 : ffff80000b34ba98
[ 3.222739] x5 : ffffffffffffffff x4 : 0000000000000000 x3 : ffff0a00ffffff04
[ 3.229891] x2 : 0000000000001000 x1 : 0000000000000000 x0 : ffff80000b34bab0
[ 3.237044] Call trace:
[ 3.239489] string (lib/vsprintf.c:644 lib/vsprintf.c:726)
[ 3.242551] vsnprintf (lib/vsprintf.c:2817)
[ 3.245954] vprintk_store (kernel/printk/printk.c:2200)
[ 3.249712] vprintk_emit (kernel/printk/printk.c:2297)
[ 3.253381] vprintk_default (kernel/printk/printk.c:2328)
[ 3.257137] vprintk (kernel/printk/printk_safe.c:50)
[ 3.260198] _printk (kernel/printk/printk.c:2341)
[ 3.263257] sysctl_err (fs/proc/proc_sysctl.c:1109)
[ 3.266577] __register_sysctl_table (fs/proc/proc_sysctl.c:1140
fs/proc/proc_sysctl.c:1383)
[ 3.271202] __register_sysctl_init (fs/proc/proc_sysctl.c:1462)
[ 3.275569] memory_failure_sysctl_init (mm/memory-failure.c:152)
[ 3.280281] do_one_initcall (init/main.c:1306)
[ 3.280453] hub 1-1:1.0: USB hub found
[ 3.284123] kernel_init_freeable (init/main.c:1378 init/main.c:1395
init/main.c:1414 init/main.c:1634)
[ 3.284133] kernel_init (init/main.c:1526)
[ 3.288246] hub 1-1:1.0: 4 ports detected
[ 3.292239] ret_from_fork (arch/arm64/kernel/entry.S:871)
[ 3.292250] Code: 91000400 110004e1 eb08009f 540000c0 (38646845)
All code
========
0:* 00 04 00 add %al,(%rax,%rax,1) <-- trapping instruction
3: 91 xchg %eax,%ecx
4: e1 04 loope 0xa
6: 00 11 add %dl,(%rcx)
8: 9f lahf
9: 00 08 add %cl,(%rax)
b: eb c0 jmp 0xffffffffffffffcd
d: 00 00 add %al,(%rax)
f: 54 push %rsp
10: 45 rex.RB
11: 68 .byte 0x68
12: 64 fs
13: 38 .byte 0x38
Code starting with the faulting instruction
===========================================
0: 45 rex.RB
1: 68 .byte 0x68
2: 64 fs
3: 38 .byte 0x38
[ 3.309416] ---[ end trace 0000000000000000 ]---
[ 3.314037] note: swapper/0[1] exited with irqs disabled
[ 3.319392] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 3.327060] SMP: stopping secondary CPUs
[ 3.331189] Kernel Offset: disabled
[ 3.334678] CPU features: 0x400002,0c3c0400,0000421b
[ 3.339649] Memory Limit: none
[ 3.342708] ---[ end Kernel panic - not syncing: Attempted to kill
init! exitcode=0x0000000b ]---
links:
----
- https://qa-reports.linaro.org/lkft/linux-next-master-sanity/build/next-20230321/testrun/15765295/suite/log-parser-test/tests/
- https://qa-reports.linaro.org/lkft/linux-next-master-sanity/build/next-20230321/testrun/15765168/suite/log-parser-test/tests/
- https://qa-reports.linaro.org/lkft/linux-next-master-sanity/build/next-20230321/testrun/15765168/suite/log-parser-test/test/check-kernel-panic/details/
metadata:
git_ref: master
git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
git_sha: f3594f0204b756638267242e26d9de611435c3ba
git_describe: next-20230321
kernel_version: 6.3.0-rc3
kernel-config:
https://storage.tuxsuite.com/public/linaro/lkft/builds/2NJ83YzjXEfP00u1LgnjMjjZfxo/config
build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/812627412/
artifact-location:
https://storage.tuxsuite.com/public/linaro/lkft/builds/2NJ83YzjXEfP00u1LgnjMjjZfxo
toolchain: gcc-11
--
Linaro LKFT
https://lkft.linaro.org
next reply other threads:[~2023-03-21 6:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-21 6:12 Naresh Kamboju [this message]
2023-03-21 9:27 ` next-20230321: arm64: Unable to handle kernel paging request at virtual address Petr Mladek
2023-03-21 15:56 ` Nathan Chancellor
2023-03-21 16:59 ` Luis Chamberlain
2023-03-22 1:05 ` Kefeng Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+G9fYsTk0GPOTEMm1KG2iJvMLG0SqUfG0JSenRYFHuOQTpuxw@mail.gmail.com \
--to=naresh.kamboju@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=anders.roxell@linaro.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-next@vger.kernel.org \
--cc=lkft-triage@lists.linaro.org \
--cc=naoya.horiguchi@nec.com \
--cc=pmladek@suse.com \
--cc=rostedt@goodmis.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.