All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
Cc: "Andrew F ., Davis" <afd@ti.com>,
	alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: Applied "ASoC: tlv320aic31xx: Reset registers during power up" to the asoc tree
Date: Thu, 07 Dec 2017 17:48:14 +0000	[thread overview]
Message-ID: <E1eN0HO-000409-7W@debutante> (raw)
In-Reply-To: <20171207153900.9831-7-afd@ti.com>

The patch

   ASoC: tlv320aic31xx: Reset registers during power up

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 0ce918c9e070bf4fd17af0d76096ad184815bd79 Mon Sep 17 00:00:00 2001
From: "Andrew F. Davis" <afd@ti.com>
Date: Thu, 7 Dec 2017 09:38:56 -0600
Subject: [PATCH] ASoC: tlv320aic31xx: Reset registers during power up

Add a reset function that toggles the reset line if available or uses
the software reset command otherwise. Use this in power up to ensure the
registers are in a sane state. This is useful when the driver module
is reloaded, or after Kexec, warm-reboots, etc..

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/tlv320aic31xx.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index 655c99db2426..858cb8be445f 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -1055,6 +1055,22 @@ static int aic31xx_regulator_event(struct notifier_block *nb,
 	return 0;
 }
 
+static int aic31xx_reset(struct aic31xx_priv *aic31xx)
+{
+	int ret = 0;
+
+	if (aic31xx->gpio_reset) {
+		gpiod_set_value(aic31xx->gpio_reset, 1);
+		ndelay(10); /* At least 10ns */
+		gpiod_set_value(aic31xx->gpio_reset, 0);
+	} else {
+		ret = regmap_write(aic31xx->regmap, AIC31XX_RESET, 1);
+	}
+	mdelay(1); /* At least 1ms */
+
+	return ret;
+}
+
 static void aic31xx_clk_on(struct snd_soc_codec *codec)
 {
 	struct aic31xx_priv *aic31xx = snd_soc_codec_get_drvdata(codec);
@@ -1098,11 +1114,13 @@ static int aic31xx_power_on(struct snd_soc_codec *codec)
 	if (ret)
 		return ret;
 
-	if (aic31xx->gpio_reset) {
-		gpiod_set_value(aic31xx->gpio_reset, 0);
-		udelay(100);
-	}
 	regcache_cache_only(aic31xx->regmap, false);
+
+	/* Reset device registers for a consistent power-on like state */
+	ret = aic31xx_reset(aic31xx);
+	if (ret < 0)
+		dev_err(aic31xx->dev, "Could not reset device: %d\n", ret);
+
 	ret = regcache_sync(aic31xx->regmap);
 	if (ret) {
 		dev_err(codec->dev,
-- 
2.15.1

  reply	other threads:[~2017-12-07 17:48 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-07 15:38 [PATCH v3 00/10] Add Headphone Detection to TLV320AIC31xx Driver Andrew F. Davis
2017-12-07 15:38 ` Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 01/10] ASoC: tlv320aic31xx: Fix GPIO header includes Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 17:48   ` Applied "ASoC: tlv320aic31xx: Fix GPIO header includes" to the asoc tree Mark Brown
2017-12-07 15:38 ` [PATCH v3 02/10] ASoC: tlv320aic31xx: Use fwnode APIs over raw OF calls Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 17:48   ` Applied "ASoC: tlv320aic31xx: Use fwnode APIs over raw OF calls" to the asoc tree Mark Brown
2017-12-07 15:38 ` [PATCH v3 03/10] ASoC: tlv320aic31xx: Remove platform data Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 04/10] ASoC: tlv320aic31xx: Add MICBIAS off setting Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 05/10] ASoC: tlv320aic31xx: Remove regulator notification handling Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 06/10] ASoC: tlv320aic31xx: Reset registers during power up Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 17:48   ` Mark Brown [this message]
2017-12-07 15:38 ` [PATCH v3 07/10] ASoC: tlv320aic31xx: Add short circuit detection support Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 08/10] ASoC: tlv320aic31xx: Add overflow " Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 09/10] ASoC: tlv320aic31xx: Add headphone/headset detection Andrew F. Davis
2017-12-07 15:38   ` Andrew F. Davis
2017-12-07 15:39 ` [PATCH v3 10/10] ASoC: tlv320aic31xx: Add button press detection Andrew F. Davis
2017-12-07 15:39   ` Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1eN0HO-000409-7W@debutante \
    --to=broonie@kernel.org \
    --cc=afd@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.