From: Biju Das <biju.das.jz@bp.renesas.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: RE: [PATCH 3/3] arm64: dts: renesas: rzg2l-smarc: Enable MTU3a counter using DT overlay
Date: Thu, 8 Jun 2023 07:46:23 +0000 [thread overview]
Message-ID: <OS0PR01MB5922C35BD8A7A9A65BFFDF548650A@OS0PR01MB5922.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <CAMuHMdVNaBk8XV8aCpsiE1SruHNgq47e0YHrF=_H4+SbG5DVmw@mail.gmail.com>
Hi Geert,
> Subject: Re: [PATCH 3/3] arm64: dts: renesas: rzg2l-smarc: Enable MTU3a
> counter using DT overlay
>
> Hi Biju,
>
> On Mon, Apr 17, 2023 at 11:02 AM Biju Das <biju.das.jz@bp.renesas.com>
> wrote:
> > Enable mtu3 node using dt overlay and disable scif2 node and delete
> > {sd1_mux,sd1_mux_uhs} nodes as the pins are shared with mtu3 external
> > clock input pins and Z phase signal(MTIOC1A).
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> > arch/arm64/boot/dts/renesas/Makefile | 2 +
> > .../boot/dts/renesas/rzg2l-smarc-pmod.dtso | 43 +++++++++++++++++++
> > 2 files changed, 45 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-smarc-pmod.dtso
> >
> > diff --git a/arch/arm64/boot/dts/renesas/Makefile
> > b/arch/arm64/boot/dts/renesas/Makefile
> > index f130165577a8..57727bcd1334 100644
> > --- a/arch/arm64/boot/dts/renesas/Makefile
> > +++ b/arch/arm64/boot/dts/renesas/Makefile
> > @@ -81,8 +81,10 @@ dtb-$(CONFIG_ARCH_R9A07G043) +=
> > r9a07g043-smarc-pmod.dtbo
> > dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
> > dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
> > dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
> > +dtb-$(CONFIG_ARCH_R9A07G044) += rzg2l-smarc-pmod.dtbo
> >
> > dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
> > +dtb-$(CONFIG_ARCH_R9A07G054) += rzg2l-smarc-pmod.dtbo
> >
> > dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
> >
> > diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pmod.dtso
> > b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pmod.dtso
> > new file mode 100644
> > index 000000000000..a502faf6e1ad
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pmod.dtso
> > @@ -0,0 +1,43 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK PMOD parts
> > + *
> > + * Copyright (C) 2023 Renesas Electronics Corp.
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
> > +
> > +&mtu3 {
> > + pinctrl-0 = <&mtu3_pins>;
> > + pinctrl-names = "default";
> > +
> > + status = "okay";
> > +};
> > +
> > +&pinctrl {
> > + mtu3_pins: mtu3 {
> > + mtu3-zphase-clk {
> > + pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /*
> MTIOC1A */
> > + };
> > +
> > + mtu3-ext-clk-input-pin {
> > + pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /*
> MTCLKA */
> > + <RZG2L_PORT_PINMUX(48, 1, 4)>; /*
> MTCLKB */
> > + };
> > + };
> > +};
> > +
> > +&scif2 {
> > + status = "disabled";
> > +};
> > +
> > +&sdhi1_pins {
> > + /delete-node/ sd1_mux;
> > +};
> > +
> > +&sdhi1_pins_uhs {
> > + /delete-node/ sd1_mux_uhs;
> > +};
>
> I'm afraid deleting nodes in the base DT from an overlay does not work...
Is it ok, if I use MACRO instead of overlay and MACRO is disabled for MTU3a by default?
5.10 cip kernel doesn't support overlay. Hence the question.
Cheers,
Biju
next prev parent reply other threads:[~2023-06-08 7:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-17 9:01 [PATCH 1/3] arm64: dts: renesas: r9a07g044: Add MTU3a node Biju Das
2023-04-17 9:01 ` [PATCH 2/3] arm64: dts: renesas: r9a07g054: " Biju Das
2023-04-20 15:25 ` Geert Uytterhoeven
2023-04-17 9:01 ` [PATCH 3/3] arm64: dts: renesas: rzg2l-smarc: Enable MTU3a counter using DT overlay Biju Das
2023-04-20 15:40 ` Geert Uytterhoeven
2023-04-20 15:49 ` Biju Das
2023-04-20 17:15 ` Geert Uytterhoeven
2023-04-20 18:16 ` Biju Das
2023-04-21 7:27 ` Geert Uytterhoeven
2023-04-21 7:45 ` Biju Das
2023-06-08 6:57 ` Geert Uytterhoeven
2023-06-08 7:08 ` Biju Das
2023-06-08 7:46 ` Biju Das [this message]
2023-04-20 15:24 ` [PATCH 1/3] arm64: dts: renesas: r9a07g044: Add MTU3a node Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=OS0PR01MB5922C35BD8A7A9A65BFFDF548650A@OS0PR01MB5922.jpnprd01.prod.outlook.com \
--to=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=geert@linux-m68k.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.