All of lore.kernel.org
 help / color / mirror / Atom feed
From: Biju Das <biju.das.jz@bp.renesas.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
	"linux-rtc@vger.kernel.org" <linux-rtc@vger.kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	"linux-renesas-soc@vger.kernel.org" 
	<linux-renesas-soc@vger.kernel.org>
Subject: RE: [PATCH] rtc: rx8581: Simplify probe()
Date: Tue, 29 Aug 2023 12:44:47 +0000	[thread overview]
Message-ID: <OS0PR01MB5922F55D18824F155228259086E7A@OS0PR01MB5922.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <OS0PR01MB5922E9E910FB14DE330034B286E0A@OS0PR01MB5922.jpnprd01.prod.outlook.com>

Hi Alexandre Belloni,

> Subject: RE: [PATCH] rtc: rx8581: Simplify probe()
> 
> Hi Alexandre Belloni,
> 
> > Subject: Re: [PATCH] rtc: rx8581: Simplify probe()
> >
> > On 28/08/2023 10:08:28+0100, Biju Das wrote:
> > > Make similar OF and ID table and simplify probe() by replacing
> > > of_device_get_match_data()->i2c_get_match_data().
> > >
> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > ---
> > > Note:
> > >  * This patch is only compile tested.
> >
> > As you have access to a rx8571, please actually test.
> 
> You are right. I have RZ/G2E board that has this RTC.
> I will test the same and confirm.

I have tested this patch on RZ/G2E platform and confirm it works ok.

Cheers,
Biju

> 
> >
> > > ---
> > >  drivers/rtc/rtc-rx8581.c | 8 ++------
> > >  1 file changed, 2 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
> > > index
> > > 48efd61a114d..68dd8b9b52f9 100644
> > > --- a/drivers/rtc/rtc-rx8581.c
> > > +++ b/drivers/rtc/rtc-rx8581.c
> > > @@ -250,8 +250,7 @@ static const struct rx85x1_config rx8571_config
> > > = {  static int rx8581_probe(struct i2c_client *client)  {
> > >  	struct rx8581 *rx8581;
> > > -	const struct rx85x1_config *config = &rx8581_config;
> > > -	const void *data = of_device_get_match_data(&client->dev);
> > > +	const struct rx85x1_config *config = i2c_get_match_data(client);
> > >  	static struct nvmem_config nvmem_cfg[] = {
> > >  		{
> > >  			.name = "rx85x1-",
> > > @@ -273,9 +272,6 @@ static int rx8581_probe(struct i2c_client
> > > *client)
> > >
> > >  	dev_dbg(&client->dev, "%s\n", __func__);
> > >
> > > -	if (data)
> > > -		config = data;
> > > -
> > >  	rx8581 = devm_kzalloc(&client->dev, sizeof(struct rx8581),
> > GFP_KERNEL);
> > >  	if (!rx8581)
> > >  		return -ENOMEM;
> > > @@ -307,7 +303,7 @@ static int rx8581_probe(struct i2c_client
> > > *client) }
> > >
> > >  static const struct i2c_device_id rx8581_id[] = {
> > > -	{ "rx8581", 0 },
> > > +	{ "rx8581", (kernel_ulong_t)&rx8581_config },
> > >  	{ }
> > >  };
> > >  MODULE_DEVICE_TABLE(i2c, rx8581_id);
> > > --
> > > 2.25.1
> > >
> >
> > --
> > Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel
> > engineering
> > https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fboot
> > lin.c
> > om%2F&data=05%7C01%7Cbiju.das.jz%40bp.renesas.com%7Cce5fb3bf24764820b8
> > 2e08d
> > ba7c22022%7C53d82571da1947e49cb4625a166a4a2a%7C0%7C0%7C638288224433894
> > 702%7
> > CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1
> > haWwi
> > LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ckmh5KF7OTtDO4LRU9QPmuBmt8XOO4Q2i
> > 8wFPE
> > yRqKs%3D&reserved=0

      reply	other threads:[~2023-08-29 12:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-28  9:08 [PATCH] rtc: rx8581: Simplify probe() Biju Das
2023-08-28 12:27 ` Alexandre Belloni
2023-08-28 12:35   ` Biju Das
2023-08-29 12:44     ` Biju Das [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=OS0PR01MB5922F55D18824F155228259086E7A@OS0PR01MB5922.jpnprd01.prod.outlook.com \
    --to=biju.das.jz@bp.renesas.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=geert+renesas@glider.be \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.