All of lore.kernel.org
 help / color / mirror / Atom feed
From: Esme <esploit@protonmail.ch>
To: "dgilbert@interlog.com" <dgilbert@interlog.com>
Cc: Qian Cai <cai@lca.pw>, David Lechner <david@lechnology.com>,
	Michel Lespinasse <walken@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	"jejb@linux.ibm.com" <jejb@linux.ibm.com>,
	"martin.petersen@oracle.com" <martin.petersen@oracle.com>,
	"joeypabalinas@gmail.com" <joeypabalinas@gmail.com>,
	linux-mm <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] rbtree: fix the red root
Date: Mon, 14 Jan 2019 03:59:04 +0000	[thread overview]
Message-ID: <UKsodHRZU8smIdO2MHHL4Yzde_YB4iWX43TaHI1uY2tMo4nii4ucbaw4XC31XIY-Pe4oEovjF62qbkeMsIMTrvT1TdCCP4Fs_fxciAzXYVc=@protonmail.ch> (raw)
In-Reply-To: <c6265fc0-4089-9d1a-ba7c-b267b847747e@interlog.com>

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Sunday, January 13, 2019 10:52 PM, Douglas Gilbert <dgilbert@interlog.com> wrote:

> On 2019-01-13 10:07 p.m., Esme wrote:
>
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Sunday, January 13, 2019 9:33 PM, Qian Cai cai@lca.pw wrote:
> >
> > > On 1/13/19 9:20 PM, David Lechner wrote:
> > >
> > > > On 1/11/19 8:58 PM, Michel Lespinasse wrote:
> > > >
> > > > > On Fri, Jan 11, 2019 at 3:47 PM David Lechner david@lechnology.com wrote:
> > > > >
> > > > > > On 1/11/19 2:58 PM, Qian Cai wrote:
> > > > > >
> > > > > > > A GPF was reported,
> > > > > > > kasan: CONFIG_KASAN_INLINE enabled
> > > > > > > kasan: GPF could be caused by NULL-ptr deref or user memory access
> > > > > > > general protection fault: 0000 [#1] SMP KASAN
> > > > > > >           kasan_die_handler.cold.22+0x11/0x31
> > > > > > >           notifier_call_chain+0x17b/0x390
> > > > > > >           atomic_notifier_call_chain+0xa7/0x1b0
> > > > > > >           notify_die+0x1be/0x2e0
> > > > > > >           do_general_protection+0x13e/0x330
> > > > > > >           general_protection+0x1e/0x30
> > > > > > >           rb_insert_color+0x189/0x1480
> > > > > > >           create_object+0x785/0xca0
> > > > > > >           kmemleak_alloc+0x2f/0x50
> > > > > > >           kmem_cache_alloc+0x1b9/0x3c0
> > > > > > >           getname_flags+0xdb/0x5d0
> > > > > > >           getname+0x1e/0x20
> > > > > > >           do_sys_open+0x3a1/0x7d0
> > > > > > >           __x64_sys_open+0x7e/0xc0
> > > > > > >           do_syscall_64+0x1b3/0x820
> > > > > > >           entry_SYSCALL_64_after_hwframe+0x49/0xbe
> > > > > > > It turned out,
> > > > > > > gparent = rb_red_parent(parent);
> > > > > > > tmp = gparent->rb_right; <-- GPF was triggered here.
> > > > > > > Apparently, "gparent" is NULL which indicates "parent" is rbtree's root
> > > > > > > which is red. Otherwise, it will be treated properly a few lines above.
> > > > > > > /*
> > > > > > >    * If there is a black parent, we are done.
> > > > > > >    * Otherwise, take some corrective action as,
> > > > > > >    * per 4), we don't want a red root or two
> > > > > > >    * consecutive red nodes.
> > > > > > >    */
> > > > > > > if(rb_is_black(parent))
> > > > > > >        break;
> > > > > > > Hence, it violates the rule #1 (the root can't be red) and need a fix
> > > > > > > up, and also add a regression test for it. This looks like was
> > > > > > > introduced by 6d58452dc06 where it no longer always paint the root as
> > > > > > > black.
> > > > > > > Fixes: 6d58452dc06 (rbtree: adjust root color in rb_insert_color() only
> > > > > > > when necessary)
> > > > > > > Reported-by: Esme esploit@protonmail.ch
> > > > > > > Tested-by: Joey Pabalinas joeypabalinas@gmail.com
> > > > > > > Signed-off-by: Qian Cai cai@lca.pw
> > > > > >
> > > > > > Tested-by: David Lechner david@lechnology.com
> > > > > > FWIW, this fixed the following crash for me:
> > > > > > Unable to handle kernel NULL pointer dereference at virtual address 00000004
> > > > >
> > > > > Just to clarify, do you have a way to reproduce this crash without the fix ?
> > > >
> > > > I am starting to suspect that my crash was caused by some new code
> > > > in the drm-misc-next tree that might be causing a memory corruption.
> > > > It threw me off that the stack trace didn't contain anything related
> > > > to drm.
> > > > See: https://patchwork.freedesktop.org/patch/276719/
> > >
> > > It may be useful for those who could reproduce this issue to turn on those
> > > memory corruption debug options to narrow down a bit.
> > > CONFIG_DEBUG_PAGEALLOC=y
> > > CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
> > > CONFIG_KASAN=y
> > > CONFIG_KASAN_GENERIC=y
> > > CONFIG_SLUB_DEBUG_ON=y
> >
> > I have been on SLAB, I configured SLAB DEBUG with a fresh pull from github. Linux syzkaller 5.0.0-rc2 #9 SMP Sun Jan 13 21:57:40 EST 2019 x86_64
> > ...
> > In an effort to get a different stack into the kernel, I felt that nothing works better than fork bomb? :)
> > Let me know if that helps.
> > root@syzkaller:~# gcc -o test3 test3.c
> > root@syzkaller:~# while : ; do ./test3 & done
>
> And is test3 the same multi-threaded program that enters the kernel via
> /dev/sg0 and then calls SCSI_IOCTL_SEND_COMMAND which goes to the SCSI
> mid-level and thence to the block layer?
>
> And please remind me, does it also fail on lk 4.20.2 ?
>
> Doug Gilbert

Yes, the same C repro from the earlier thread.  It was a 4.20.0 kernel where it was first detected.  I can move to 4.20.2 and see if that changes anything.

Esme




  reply	other threads:[~2019-01-14  3:59 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <YrcPMrGmYbPe_xgNEV6Q0jqc5XuPYmL2AFSyeNmg1gW531bgZnBGfEUK5_ktqDBaNW37b-NP2VXvlliM7_PsBRhSfB649MaW1Ne7zT9lHc=@protonmail.ch>
2019-01-11 16:51 ` [PATCH] rbtree: fix the red root Qian Cai
2019-01-11 17:17   ` Joey Pabalinas
2019-01-11 17:31   ` Matthew Wilcox
2019-01-11 17:53     ` Joey Pabalinas
2019-01-11 18:12     ` Qian Cai
2019-01-11 18:12       ` Qian Cai
2019-01-11 18:16       ` Matthew Wilcox
2019-01-11 18:16         ` Matthew Wilcox
2019-01-11 20:58         ` [PATCH v2] " Qian Cai
2019-01-11 23:16           ` Matthew Wilcox
2019-01-12  0:18             ` Qian Cai
2019-01-12  0:39               ` Esme
2019-01-11 23:47           ` David Lechner
2019-01-12  2:58             ` Michel Lespinasse
2019-01-12  2:58               ` Michel Lespinasse
2019-01-14  2:20               ` David Lechner
2019-01-14  2:33                 ` Qian Cai
2019-01-14  3:07                   ` Esme
2019-01-14  3:52                     ` Douglas Gilbert
2019-01-14  3:59                       ` Esme [this message]
2019-01-14  4:52                         ` Douglas Gilbert
2019-01-14  6:23                           ` Esme
2019-01-14 15:45                             ` Qian Cai
2019-01-14 15:51                               ` Esme
2019-01-14 17:58                                 ` Qian Cai
2019-01-14 18:26                                   ` Douglas Gilbert
2019-01-15  5:31                             ` Qian Cai
2019-01-16 14:37                               ` Esme
2019-01-18 17:10                                 ` Qian Cai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='UKsodHRZU8smIdO2MHHL4Yzde_YB4iWX43TaHI1uY2tMo4nii4ucbaw4XC31XIY-Pe4oEovjF62qbkeMsIMTrvT1TdCCP4Fs_fxciAzXYVc=@protonmail.ch' \
    --to=esploit@protonmail.ch \
    --cc=akpm@linux-foundation.org \
    --cc=cai@lca.pw \
    --cc=david@lechnology.com \
    --cc=dgilbert@interlog.com \
    --cc=jejb@linux.ibm.com \
    --cc=joeypabalinas@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=martin.petersen@oracle.com \
    --cc=walken@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.