From: Stephan Gerhold <stephan@gerhold.net>
To: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Cc: linux-kernel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 3/3] arm64: dts: qcom: msm8916-longcheer-l8910: Add imu/magnetometer
Date: Mon, 25 Jan 2021 11:06:56 +0100 [thread overview]
Message-ID: <YA6YQMHDk4Nx1dDE@gerhold.net> (raw)
In-Reply-To: <20210125094435.7528-4-jonathan.albrieux@gmail.com>
On Mon, Jan 25, 2021 at 10:44:32AM +0100, Jonathan Albrieux wrote:
> BQ Aquaris X5 (Longcheer L8910) has:
> - BMI160 accelerometer and gyroscope sensor
> - AK09911 magnetometer sensor
> Add them to the device tree.
>
> This patch depends on patch "arm64: dts: qcom: msm8916: Add blsp_i2c3".
>
> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 37 +++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> index 7d5eff922f41..27845189ac2b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> @@ -56,6 +56,35 @@
> };
> };
>
> +&blsp_i2c3 {
> + status = "okay";
> +
> + magnetometer@d {
> + compatible = "asahi-kasei,ak09911";
> + reg = <0x0d>;
> +
> + vdd-supply = <&pm8916_l17>;
> + vid-supply = <&pm8916_l6>;
> +
> + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&mag_reset_default>;
> + };
> +
> + imu@68 {
> + compatible = "bosch,bmi160";
> + reg = <0x68>;
> +
> + vdd-supply = <&pm8916_l17>;
> + vddio-supply = <&pm8916_l6>;
> +
> + mount-matrix = "0", "1", "0",
> + "-1", "0", "0",
> + "0", "0", "1";
> + };
> +};
> +
> &blsp1_uart2 {
> status = "okay";
> };
> @@ -220,6 +249,14 @@
> bias-pull-up;
> };
>
> + mag_reset_default: mag-reset-default {
> + pins = "gpio111";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> usb_id_default: usb-id-default {
> pins = "gpio110";
> function = "gpio";
> --
> 2.17.1
>
prev parent reply other threads:[~2021-01-26 20:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-25 9:44 [PATCH v2 0/3] Add initial support for BQ Aquaris X5 Jonathan Albrieux
2021-01-25 9:44 ` [PATCH v2 1/3] arm64: dts: qcom: Add device tree for BQ Aquaris X5 (Longcheer L8910) Jonathan Albrieux
2021-01-25 9:44 ` [PATCH v2 2/3] arm64: dts: qcom: msm8916: Add blsp_i2c3 Jonathan Albrieux
2021-01-25 9:44 ` [PATCH v2 3/3] arm64: dts: qcom: msm8916-longcheer-l8910: Add imu/magnetometer Jonathan Albrieux
2021-01-25 10:06 ` Stephan Gerhold [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YA6YQMHDk4Nx1dDE@gerhold.net \
--to=stephan@gerhold.net \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathan.albrieux@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.