Re: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file

From: Vinod Koul <vkoul@kernel.org>
To: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: linux-arm-msm@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, bhupesh.linux@gmail.com
Subject: Re: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
Date: Mon, 7 Jun 2021 20:52:33 +0530	[thread overview]
Message-ID: <YL45uRr6+Q3jvPrO@vkoul-mobl> (raw)
In-Reply-To: <20210607113840.15435-9-bhupesh.sharma@linaro.org>

On 07-06-21, 17:08, Bhupesh Sharma wrote:
> Add base DTS file for sa8155p-adp and enable boot to console,
> tlmm reserved range and also include pmic file(s).

I see ufs added too, pls mention that as well

 --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb

I think this should go before sdm..

> +		vdd_usb_hs_core:
> +		vdda_pll_hv_cc_ebi01:
> +		vdda_pll_hv_cc_ebi23:
> +		vdda_ufs_2ln_core:
> +		vdda_ufs_2ln_core:
> +		vdda_usb_ss_core:
> +		vdda_usb_ss_dp_core_1:
> +		vdda_usb_ss_dp_core_2:
> +		vdda_sp_sensor:
> +		vdda_qlink_lv:
> +		vdda_qlink_lv_ck:
> +		vdda_qrefs_0p875_5:

I didnt find these labels very useful, so maybe remove?
It helped me to understand that a regulator is vreg_l5a_0p88 as it
implies I am using l5a with 0p88V :)

> +		vreg_l5a_0p88: ldo5 {
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

Pls do add regulator-name property, it helps in understanding which ldo
in logs/debugfs, otherwise ldo5 will comes for both pmics

-- 
~Vinod