All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	laurent.pinchart@ideasonboard.com, geert@linux-m68k.org,
	horms@verge.net.au, uli+renesas@fpond.eu,
	VenkataRajesh.Kalakodima@in.bosch.com, airlied@linux.ie,
	daniel@ffwll.ch
Cc: koji.matsuoka.xm@renesas.com, muroya@ksk.co.jp,
	Harsha.ManjulaMallikarjun@in.bosch.com,
	linux-renesas-soc@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 8/9] drm: rcar-du: kms: Update CMM in atomic commit tail
Date: Thu, 12 Sep 2019 10:51:47 +0100	[thread overview]
Message-ID: <abe2f713-48ab-b39a-c0e6-8c1e557a48c4@ideasonboard.com> (raw)
In-Reply-To: <20190906135436.10622-9-jacopo+renesas@jmondi.org>

Hi Jacopo,

On 06/09/2019 14:54, Jacopo Mondi wrote:
> Update CMM settings at in the atomic commit tail helper method.
> The CMM is updated with new gamma values provided to the driver
> in the GAMMA_LUT blob property.
> 
> When resuming from system suspend, the DU driver is responsible for
> reprogramming and enabling the CMM unit if it was in use at the time the
> system entered the suspend state.  Force the color_mgmt_changed flag to
> true if the DRM gamma lut color transformation property was set in the
> CRTC state duplicated at suspend time, as the CMM gets reprogrammed only
> if said flag is active in the rcar_du_atomic_commit_update_cmm() method.
> 
> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Also throwing in an LGTM here.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>



> ---
> 
> Daniel could you have a look if resume bits are worth being moved to the
> DRM core? The color_mgmt_changed flag is set to false when the state is
> duplicated if I read the code correctly, but when this happens in a
> suspend/resume sequence its value should probably be restored to true if
> any color management property was set in the crtc state when system entered
> suspend.
> 
> ---
> 
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 20 ++++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_kms.c | 38 +++++++++++++++++++++++++++
>  2 files changed, 58 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> index 018480a8f35c..d1003d31cfaf 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -17,6 +17,7 @@
>  #include <linux/slab.h>
>  #include <linux/wait.h>
> 
> +#include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_fb_cma_helper.h>
>  #include <drm/drm_fb_helper.h>
> @@ -482,6 +483,25 @@ static int rcar_du_pm_suspend(struct device *dev)
>  static int rcar_du_pm_resume(struct device *dev)
>  {
>  	struct rcar_du_device *rcdu = dev_get_drvdata(dev);
> +	struct drm_atomic_state *state = rcdu->ddev->mode_config.suspend_state;
> +	unsigned int i;
> +
> +	for (i = 0; i < rcdu->num_crtcs; ++i) {
> +		struct drm_crtc *crtc = &rcdu->crtcs[i].crtc;
> +		struct drm_crtc_state *crtc_state;
> +
> +		crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> +		if (!crtc_state)
> +			continue;
> +
> +		/*
> +		 * Force re-enablement of CMM after system resume if any
> +		 * of the DRM color transformation properties was set in
> +		 * the state saved at system suspend time.
> +		 */
> +		if (crtc_state->gamma_lut)
> +			crtc_state->color_mgmt_changed = true;
> +	}
> 
>  	return drm_mode_config_helper_resume(rcdu->ddev);
>  }
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> index 294630e56992..fc30fff0eb8d 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> @@ -22,6 +22,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/wait.h>
> 
> +#include "rcar_cmm.h"
>  #include "rcar_du_crtc.h"
>  #include "rcar_du_drv.h"
>  #include "rcar_du_encoder.h"
> @@ -368,6 +369,40 @@ rcar_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
>   * Atomic Check and Update
>   */
> 
> +static void rcar_du_atomic_commit_update_cmm(struct drm_crtc *crtc,
> +					     struct drm_crtc_state *old_state)
> +{
> +	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> +	struct rcar_cmm_config cmm_config = {};
> +	struct device *dev = rcrtc->dev->dev;
> +	struct drm_property_blob *lut_blob;
> +
> +	if (!rcrtc->cmm || !crtc->state->color_mgmt_changed)
> +		return;
> +
> +	if (!crtc->state->gamma_lut) {
> +		cmm_config.lut.enable = false;
> +		rcar_cmm_setup(rcrtc->cmm, &cmm_config);
> +		return;
> +	}
> +
> +	lut_blob = crtc->state->gamma_lut;
> +	if (lut_blob->length != (CM2_LUT_SIZE * sizeof(struct drm_color_lut))) {
> +		/*
> +		 * We only accept fully populated LUT tables;
> +		 * be loud here, otherwise the CMM gets silently ignored.
> +		 */
> +		dev_err(dev, "invalid gamma lut size of %lu bytes\n",
> +			lut_blob->length);
> +		return;
> +	}
> +
> +	cmm_config.lut.enable = true;
> +	cmm_config.lut.table = (struct drm_color_lut *)lut_blob->data;
> +
> +	rcar_cmm_setup(rcrtc->cmm, &cmm_config);
> +}
> +
>  static int rcar_du_atomic_check(struct drm_device *dev,
>  				struct drm_atomic_state *state)
>  {
> @@ -410,6 +445,9 @@ static void rcar_du_atomic_commit_tail(struct drm_atomic_state *old_state)
>  			rcdu->dpad1_source = rcrtc->index;
>  	}
> 
> +	for_each_old_crtc_in_state(old_state, crtc, crtc_state, i)
> +		rcar_du_atomic_commit_update_cmm(crtc, crtc_state);
> +
>  	/* Apply the atomic update. */
>  	drm_atomic_helper_commit_modeset_disables(dev, old_state);
>  	drm_atomic_helper_commit_planes(dev, old_state,
> --
> 2.23.0
> 


  reply	other threads:[~2019-09-12  9:51 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 13:54 [PATCH v4 0/9 drm: rcar-du: Add Color Management Module (CMM) Jacopo Mondi
2019-09-06 13:54 ` [PATCH v4 1/9] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation Jacopo Mondi
2019-09-11 19:04   ` Kieran Bingham
2019-09-17 17:55   ` Rob Herring
2019-09-18 22:08   ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 2/9] dt-bindings: display, renesas,du: Document cmms property Jacopo Mondi
2019-09-11 16:06   ` Kieran Bingham
2019-09-17 17:58     ` Rob Herring
2019-09-06 13:54 ` [PATCH v4 3/9] drm: rcar-du: Add support for CMM Jacopo Mondi
2019-09-11 15:54   ` Kieran Bingham
2019-09-12  7:59     ` Jacopo Mondi
2019-09-12  9:49       ` Kieran Bingham
2019-09-18 22:55   ` Laurent Pinchart
2019-09-19  8:59     ` Kieran Bingham
2019-09-20 22:43       ` Laurent Pinchart
2019-10-10 17:46     ` Jacopo Mondi
2019-10-10 17:46       ` Jacopo Mondi
2019-10-14 23:54       ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 4/9] drm: rcar-du: Claim CMM support for Gen3 SoCs Jacopo Mondi
2019-09-11 18:45   ` Kieran Bingham
2019-09-06 13:54 ` [PATCH v4 5/9] drm: rcar-du: kms: Initialize CMM instances Jacopo Mondi
2019-09-12  9:27   ` Kieran Bingham
2019-09-12  9:27     ` Kieran Bingham
2019-09-06 13:54 ` [PATCH v4 6/9] drm: rcar-du: crtc: Enable and disable CMMs Jacopo Mondi
2019-09-11 18:40   ` Kieran Bingham
2019-09-12  8:07     ` Jacopo Mondi
2019-09-12  8:07       ` Jacopo Mondi
2019-09-12  9:19       ` Kieran Bingham
2019-09-18 23:23         ` Laurent Pinchart
2019-09-18 23:23           ` Laurent Pinchart
2019-09-19  8:08           ` Kieran Bingham
2019-09-20 22:44             ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 7/9] drm: rcar-du: crtc: Register GAMMA_LUT properties Jacopo Mondi
2019-09-11 18:47   ` Kieran Bingham
2019-09-06 13:54 ` [PATCH v4 8/9] drm: rcar-du: kms: Update CMM in atomic commit tail Jacopo Mondi
2019-09-12  9:51   ` Kieran Bingham [this message]
2019-09-20 22:49   ` Laurent Pinchart
2019-09-30 20:53   ` Ezequiel Garcia
2019-10-01 19:20     ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 9/9] arm64: dts: renesas: Add CMM units to Gen3 SoCs Jacopo Mondi
2019-09-11 18:16   ` Kieran Bingham
2019-09-11 19:35     ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=abe2f713-48ab-b39a-c0e6-8c1e557a48c4@ideasonboard.com \
    --to=kieran.bingham+renesas@ideasonboard.com \
    --cc=Harsha.ManjulaMallikarjun@in.bosch.com \
    --cc=VenkataRajesh.Kalakodima@in.bosch.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=koji.matsuoka.xm@renesas.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=muroya@ksk.co.jp \
    --cc=uli+renesas@fpond.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.