* [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in corrupted
@ 2023-04-28 20:52 syzbot
2023-05-02 6:50 ` Dmitry Vyukov
0 siblings, 1 reply; 3+ messages in thread
From: syzbot @ 2023-04-28 20:52 UTC (permalink / raw)
To: linux-kernel, syzkaller-bugs
Hello,
syzbot found the following issue on:
HEAD commit: 22b8cc3e78f5 Merge tag 'x86_mm_for_6.4' of git://git.kerne..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=11fa5010280000
kernel config: https://syzkaller.appspot.com/x/.config?x=1af34c4cafb72074
dashboard link: https://syzkaller.appspot.com/bug?extid=0f3348b0cb4da6b6072d
compiler: arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
userspace arch: arm
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+0f3348b0cb4da6b6072d@syzkaller.appspotmail.com
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x00000000ffffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
Kernel command line: root=/dev/vda console=ttyAMA0 earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 520868
allocated 2097152 bytes of page_ext
mem auto-init: stack:off, heap alloc:on, heap free:off
software IO TLB: area num 2.
software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
Memory: 1954368K/2097152K available (22528K kernel code, 2361K rwdata, 8400K rodata, 2048K init, 867K bss, 126400K reserved, 16384K cma-reserved, 524288K highmem)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
trace event string verifier disabled
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
rcu: RCU callback double-/use-after-free debug is enabled.
All grace periods are expedited (rcu_expedited).
Trampoline variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
GIC physical location is 0x2c001000
rcu: srcu_init: Setting srcu_struct sizes based on contention.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
arch_timer: cp15 timer(s) running at 62.50MHz (virt).
clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
Switching to timer-based delay loop, resolution 16ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
landlock: Up and running.
Yama: becoming mindful.
TOMOYO Linux initialized
SELinux: Initializing.
LSM support for eBPF active
stackdepot: allocating hash table of 131072 entries via kvcalloc
Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
CPU: Testing write buffer coherency: ok
CPU0: Spectre BHB: enabling loop workaround for all CPUs
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000206 when execute
[00000206] *pgd=80000080004003, *pmd=00000000
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
If the bug is already fixed, let syzbot know by replying with:
#syz fix: exact-commit-title
If you want to change bug's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)
If the bug is a duplicate of another bug, reply with:
#syz dup: exact-subject-of-another-report
If you want to undo deduplication, reply with:
#syz undup
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in corrupted
2023-04-28 20:52 [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in corrupted syzbot
@ 2023-05-02 6:50 ` Dmitry Vyukov
0 siblings, 0 replies; 3+ messages in thread
From: Dmitry Vyukov @ 2023-05-02 6:50 UTC (permalink / raw)
To: syzbot; +Cc: linux-kernel, syzkaller-bugs, Linux ARM
On Fri, 28 Apr 2023 at 22:52, syzbot
<syzbot+0f3348b0cb4da6b6072d@syzkaller.appspotmail.com> wrote:
>
> Hello,
>
> syzbot found the following issue on:
>
> HEAD commit: 22b8cc3e78f5 Merge tag 'x86_mm_for_6.4' of git://git.kerne..
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=11fa5010280000
> kernel config: https://syzkaller.appspot.com/x/.config?x=1af34c4cafb72074
> dashboard link: https://syzkaller.appspot.com/bug?extid=0f3348b0cb4da6b6072d
> compiler: arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
> userspace arch: arm
>
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+0f3348b0cb4da6b6072d@syzkaller.appspotmail.com
+arm mailing list
Kernel started falling apart on arm during boot in various strange ways.
#syz set subsystems: arm
> Movable zone start for each node
> Early memory node ranges
> node 0: [mem 0x0000000080000000-0x00000000ffffffff]
> Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
> percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
> Kernel command line: root=/dev/vda console=ttyAMA0 earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
> Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> Built 1 zonelists, mobility grouping on. Total pages: 520868
> allocated 2097152 bytes of page_ext
> mem auto-init: stack:off, heap alloc:on, heap free:off
> software IO TLB: area num 2.
> software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
> Memory: 1954368K/2097152K available (22528K kernel code, 2361K rwdata, 8400K rodata, 2048K init, 867K bss, 126400K reserved, 16384K cma-reserved, 524288K highmem)
> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> trace event string verifier disabled
> rcu: Preemptible hierarchical RCU implementation.
> rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
> rcu: RCU callback double-/use-after-free debug is enabled.
> All grace periods are expedited (rcu_expedited).
> Trampoline variant of Tasks RCU enabled.
> Tracing variant of Tasks RCU enabled.
> rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> GIC physical location is 0x2c001000
> rcu: srcu_init: Setting srcu_struct sizes based on contention.
> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
> clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
> arch_timer: cp15 timer(s) running at 62.50MHz (virt).
> clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
> sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
> Switching to timer-based delay loop, resolution 16ns
> Console: colour dummy device 80x30
> Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
> pid_max: default: 32768 minimum: 301
> LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
> landlock: Up and running.
> Yama: becoming mindful.
> TOMOYO Linux initialized
> SELinux: Initializing.
> LSM support for eBPF active
> stackdepot: allocating hash table of 131072 entries via kvcalloc
> Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> CPU: Testing write buffer coherency: ok
> CPU0: Spectre BHB: enabling loop workaround for all CPUs
> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> 8<--- cut here ---
> Unable to handle kernel NULL pointer dereference at virtual address 00000206 when execute
> [00000206] *pgd=80000080004003, *pmd=00000000
>
>
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@googlegroups.com.
>
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>
> If the bug is already fixed, let syzbot know by replying with:
> #syz fix: exact-commit-title
>
> If you want to change bug's subsystems, reply with:
> #syz set subsystems: new-subsystem
> (See the list of subsystem names on the web dashboard)
>
> If the bug is a duplicate of another bug, reply with:
> #syz dup: exact-subject-of-another-report
>
> If you want to undo deduplication, reply with:
> #syz undup
>
> --
> You received this message because you are subscribed to the Google Groups "syzkaller-bugs" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-bugs+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller-bugs/00000000000058a08405fa6ba52a%40google.com.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in corrupted
@ 2023-05-02 6:50 ` Dmitry Vyukov
0 siblings, 0 replies; 3+ messages in thread
From: Dmitry Vyukov @ 2023-05-02 6:50 UTC (permalink / raw)
To: syzbot; +Cc: linux-kernel, syzkaller-bugs, Linux ARM
On Fri, 28 Apr 2023 at 22:52, syzbot
<syzbot+0f3348b0cb4da6b6072d@syzkaller.appspotmail.com> wrote:
>
> Hello,
>
> syzbot found the following issue on:
>
> HEAD commit: 22b8cc3e78f5 Merge tag 'x86_mm_for_6.4' of git://git.kerne..
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=11fa5010280000
> kernel config: https://syzkaller.appspot.com/x/.config?x=1af34c4cafb72074
> dashboard link: https://syzkaller.appspot.com/bug?extid=0f3348b0cb4da6b6072d
> compiler: arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
> userspace arch: arm
>
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+0f3348b0cb4da6b6072d@syzkaller.appspotmail.com
+arm mailing list
Kernel started falling apart on arm during boot in various strange ways.
#syz set subsystems: arm
> Movable zone start for each node
> Early memory node ranges
> node 0: [mem 0x0000000080000000-0x00000000ffffffff]
> Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
> percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
> Kernel command line: root=/dev/vda console=ttyAMA0 earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
> Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> Built 1 zonelists, mobility grouping on. Total pages: 520868
> allocated 2097152 bytes of page_ext
> mem auto-init: stack:off, heap alloc:on, heap free:off
> software IO TLB: area num 2.
> software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
> Memory: 1954368K/2097152K available (22528K kernel code, 2361K rwdata, 8400K rodata, 2048K init, 867K bss, 126400K reserved, 16384K cma-reserved, 524288K highmem)
> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> trace event string verifier disabled
> rcu: Preemptible hierarchical RCU implementation.
> rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
> rcu: RCU callback double-/use-after-free debug is enabled.
> All grace periods are expedited (rcu_expedited).
> Trampoline variant of Tasks RCU enabled.
> Tracing variant of Tasks RCU enabled.
> rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> GIC physical location is 0x2c001000
> rcu: srcu_init: Setting srcu_struct sizes based on contention.
> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
> clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
> arch_timer: cp15 timer(s) running at 62.50MHz (virt).
> clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
> sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
> Switching to timer-based delay loop, resolution 16ns
> Console: colour dummy device 80x30
> Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
> pid_max: default: 32768 minimum: 301
> LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
> landlock: Up and running.
> Yama: becoming mindful.
> TOMOYO Linux initialized
> SELinux: Initializing.
> LSM support for eBPF active
> stackdepot: allocating hash table of 131072 entries via kvcalloc
> Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> CPU: Testing write buffer coherency: ok
> CPU0: Spectre BHB: enabling loop workaround for all CPUs
> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> 8<--- cut here ---
> Unable to handle kernel NULL pointer dereference at virtual address 00000206 when execute
> [00000206] *pgd=80000080004003, *pmd=00000000
>
>
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@googlegroups.com.
>
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>
> If the bug is already fixed, let syzbot know by replying with:
> #syz fix: exact-commit-title
>
> If you want to change bug's subsystems, reply with:
> #syz set subsystems: new-subsystem
> (See the list of subsystem names on the web dashboard)
>
> If the bug is a duplicate of another bug, reply with:
> #syz dup: exact-subject-of-another-report
>
> If you want to undo deduplication, reply with:
> #syz undup
>
> --
> You received this message because you are subscribed to the Google Groups "syzkaller-bugs" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-bugs+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller-bugs/00000000000058a08405fa6ba52a%40google.com.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-05-02 6:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-04-28 20:52 [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in corrupted syzbot
2023-05-02 6:50 ` Dmitry Vyukov
2023-05-02 6:50 ` Dmitry Vyukov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.