All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+6bc35f3913193fe7f0d3@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
	syzkaller-bugs@googlegroups.com, tj@kernel.org
Subject: Re: [syzbot] KASAN: use-after-free Read in kernfs_next_descendant_post (2)
Date: Thu, 20 Oct 2022 20:45:21 -0700	[thread overview]
Message-ID: <00000000000064d19605eb8345de@google.com> (raw)
In-Reply-To: <20221021032341.1481-1-hdanton@sina.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

her
[    5.597695][    T1] NFS: Registering the id_resolver key type
[    5.599149][    T1] Key type id_resolver registered
[    5.600622][    T1] Key type id_legacy registered
[    5.601685][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    5.602778][    T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    5.611543][    T1] Key type cifs.spnego registered
[    5.613253][    T1] Key type cifs.idmap registered
[    5.614650][    T1] ntfs: driver 2.1.32 [Flags: R/W].
[    5.616739][    T1] ntfs3: Max link count 4000
[    5.617506][    T1] ntfs3: Enabled Linux POSIX ACLs support
[    5.618484][    T1] ntfs3: Read-only LZX/Xpress compression included
[    5.621078][    T1] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[    5.622255][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    5.626600][    T1] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    5.628348][    T1] QNX4 filesystem 0.2.3 registered.
[    5.630193][    T1] qnx6: QNX6 filesystem 1.0.0 registered.
[    5.632221][    T1] fuse: init (API version 7.37)
[    5.636288][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[    5.637940][    T1] orangefs_init: module version upstream loaded
[    5.639824][    T1] JFS: nTxBlock = 8192, nTxLock = 65536
[    5.653813][    T1] SGI XFS with ACLs, security attributes, realtime, quota, fatal assert, debug enabled
[    5.666765][    T1] 9p: Installing v9fs 9p2000 file system support
[    5.669394][    T1] NILFS version 2 loaded
[    5.670723][    T1] befs: version: 0.9.3
[    5.672670][    T1] ocfs2: Registered cluster interface o2cb
[    5.674777][    T1] ocfs2: Registered cluster interface user
[    5.676600][    T1] OCFS2 User DLM kernel interface loaded
[    5.687111][    T1] gfs2: GFS2 installed
[    5.698581][    T1] ceph: loaded (mds proto 32)
[    5.710024][    T1] NET: Registered PF_ALG protocol family
[    5.711181][    T1] xor: automatically using best checksumming function   avx       
[    5.712855][    T1] async_tx: api initialized (async)
[    5.714028][    T1] Key type asymmetric registered
[    5.714899][    T1] Asymmetric key parser 'x509' registered
[    5.715986][    T1] Asymmetric key parser 'pkcs8' registered
[    5.716969][    T1] Key type pkcs7_test registered
[    5.720754][    T1] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    5.721886][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[    5.723595][    T1] io scheduler mq-deadline registered
[    5.725006][    T1] io scheduler kyber registered
[    5.726238][    T1] io scheduler bfq registered
[    5.733302][    T1] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    5.760627][    T1] ACPI: button: Power Button [PWRF]
[    5.763071][    T1] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[    5.765552][    T1] ACPI: button: Sleep Button [SLPF]
[    5.785152][    T1] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    5.786468][    T1] virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
[    5.800106][    T1] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[    5.801283][    T1] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    5.818083][    T1] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    5.819227][    T1] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
[    6.139234][    T1] N_HDLC line discipline registered with maxframe=4096
[    6.143191][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    6.145743][    T1] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    6.153400][    T1] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    6.158094][    T1] 00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
[    6.164827][    T1] 00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
[    6.173085][    T1] Non-volatile memory driver v1.3
[    6.191613][    T1] Linux agpgart interface v0.103
[    6.194194][    T1] ACPI: bus type drm_connector registered
[    6.199163][    T1] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[    6.204590][    T1] [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
[    6.264084][    T1] Console: switching to colour frame buffer device 128x48
[    6.281271][    T1] platform vkms: [drm] fb0: vkmsdrmfb frame buffer device
[    6.282951][    T1] usbcore: registered new interface driver udl
[    6.331971][    T1] brd: module loaded
[    6.381966][    T1] loop: module loaded
[    6.450450][    T1] zram: Added device: zram0
[    6.456807][    T1] null_blk: disk nullb0 created
[    6.457559][    T1] null_blk: module loaded
[    6.458703][    T1] Guest personality initialized and is inactive
[    6.460362][    T1] VMCI host device registered (name=vmci, major=10, minor=119)
[    6.461772][    T1] Initialized host personality
[    6.463064][    T1] usbcore: registered new interface driver rtsx_usb
[    6.464912][    T1] usbcore: registered new interface driver viperboard
[    6.466543][    T1] usbcore: registered new interface driver dln2
[    6.468098][    T1] usbcore: registered new interface driver pn533_usb
[    6.472749][    T1] nfcsim 0.2 initialized
[    6.473704][    T1] usbcore: registered new interface driver port100
[    6.475083][    T1] usbcore: registered new interface driver nfcmrvl
[    6.478962][    T1] Loading iSCSI transport class v2.0-870.
[    6.507427][    T1] scsi host0: Virtio SCSI HBA
[    6.546621][    T1] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    6.549977][   T91] scsi 0:0:1:0: Direct-Access     Google   PersistentDisk   1    PQ: 0 ANSI: 6
[    6.577518][    T1] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    6.579716][    T1] db_root: cannot open: /etc/target
[    6.581597][    T1] slram: not enough parameters.
[    6.589382][    T1] ftl_cs: FTL header not found.
[    6.626146][    T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    6.627700][    T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    6.637162][    T1] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[    6.647509][    T1] MACsec IEEE 802.1AE
[    6.657940][    T1] tun: Universal TUN/TAP device driver, 1.6
[    6.715241][    T1] ------------[ cut here ]------------
[    6.716632][    T1] WARNING: CPU: 0 PID: 1 at include/linux/cpumask.h:110 __netif_set_xps_queue+0x88e/0x1f30
[    6.718427][    T1] Modules linked in:
[    6.719252][    T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1-syzkaller-00025-gaae703b02f92-dirty #0
[    6.721441][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
[    6.723065][    T1] RIP: 0010:__netif_set_xps_queue+0x88e/0x1f30
[    6.724387][    T1] Code: fa 48 c7 c2 a0 a8 f4 8a be 2e 0a 00 00 48 c7 c7 40 a7 f4 8a c6 05 a2 69 74 06 01 e8 f2 e3 f1 01 e9 ef fd ff ff e8 e2 ae 24 fa <0f> 0b e9 8e fa ff ff 8b 6c 24 38 e8 d2 ae 24 fa 49 8d 7c 24 04 48
[    6.727854][    T1] RSP: 0018:ffffc90000067898 EFLAGS: 00010293
[    6.728833][    T1] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[    6.731435][    T1] RDX: ffff88813fe50000 RSI: ffffffff8757dc0e RDI: 0000000000000004
[    6.734156][    T1] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000002
[    6.735691][    T1] R10: 0000000000000002 R11: 000000000008c07e R12: ffff88801fb48680
[    6.737253][    T1] R13: 0000000000000003 R14: ffff88801fb48698 R15: 0000000000000002
[    6.738658][    T1] FS:  0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
[    6.740493][    T1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.741783][    T1] CR2: ffff88823ffff000 CR3: 000000000bc8e000 CR4: 0000000000350ef0
[    6.743162][    T1] Call Trace:
[    6.744268][    T1]  <TASK>
[    6.744948][    T1]  ? vp_bus_name+0xc0/0xc0
[    6.745802][    T1]  virtnet_set_affinity+0x4f0/0x750
[    6.746726][    T1]  ? skb_recv_done+0x120/0x120
[    6.747533][    T1]  virtnet_probe+0x12ae/0x31e0
[    6.748436][    T1]  ? virtnet_find_vqs+0xc30/0xc30
[    6.749270][    T1]  virtio_dev_probe+0x577/0x870
[    6.750252][    T1]  ? virtio_features_ok+0x1e0/0x1e0
[    6.751234][    T1]  really_probe+0x249/0xb90
[    6.752007][    T1]  __driver_probe_device+0x1df/0x4d0
[    6.752884][    T1]  driver_probe_device+0x4c/0x1a0
[    6.753955][    T1]  __driver_attach+0x1d0/0x550
[    6.754899][    T1]  ? __device_attach_driver+0x2e0/0x2e0
[    6.756222][    T1]  bus_for_each_dev+0x147/0x1d0
[    6.756970][    T1]  ? subsys_dev_iter_exit+0x20/0x20
[    6.758183][    T1]  bus_add_driver+0x4c9/0x640
[    6.759241][    T1]  driver_register+0x220/0x3a0
[    6.760270][    T1]  ? veth_init+0x11/0x11
[    6.761196][    T1]  virtio_net_driver_init+0x93/0xd2
[    6.762104][    T1]  do_one_initcall+0x13d/0x780
[    6.763172][    T1]  ? trace_event_raw_event_initcall_level+0x1f0/0x1f0
[    6.764469][    T1]  ? parameq+0x140/0x170
[    6.765271][    T1]  kernel_init_freeable+0x6ff/0x788
[    6.766089][    T1]  ? rest_init+0x270/0x270
[    6.766807][    T1]  kernel_init+0x1a/0x1d0
[    6.767976][    T1]  ? rest_init+0x270/0x270
[    6.768818][    T1]  ret_from_fork+0x1f/0x30
[    6.770003][    T1]  </TASK>
[    6.770460][    T1] Kernel panic - not syncing: panic_on_warn set ...
[    6.771442][    T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1-syzkaller-00025-gaae703b02f92-dirty #0
[    6.773956][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
[    6.776134][    T1] Call Trace:
[    6.776861][    T1]  <TASK>
[    6.777450][    T1]  dump_stack_lvl+0xcd/0x134
[    6.779001][    T1]  panic+0x2c8/0x622
[    6.779782][    T1]  ? panic_print_sys_info.part.0+0x110/0x110
[    6.781025][   T34] sd 0:0:1:0: [sda] 4194304 512-byte logical blocks: (2.15 GB/2.00 GiB)
[    6.781062][   T34] sd 0:0:1:0: [sda] 4096-byte physical blocks
[    6.781197][   T34] sd 0:0:1:0: [sda] Write Protect is off
[    6.781220][   T34] sd 0:0:1:0: [sda] Mode Sense: 1f 00 00 08
[    6.781450][   T34] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.787778][    T1]  ? __warn.cold+0x24b/0x350
[    6.789536][   T91] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    6.790433][    T1]  ? __netif_set_xps_queue+0x88e/0x1f30
[    6.790433][    T1]  __warn.cold+0x25c/0x350
[    6.790433][    T1]  ? __netif_set_xps_queue+0x88e/0x1f30
[    6.790433][    T1]  report_bug+0x1bc/0x210
[    6.790433][    T1]  handle_bug+0x3c/0x70
[    6.794504][   T34]  sda: sda1
[    6.795927][   T34] sd 0:0:1:0: [sda] Attached SCSI disk
[    6.790433][    T1]  exc_invalid_op+0x14/0x40
[    6.790433][    T1]  asm_exc_invalid_op+0x16/0x20
[    6.799643][    T1] RIP: 0010:__netif_set_xps_queue+0x88e/0x1f30
[    6.799643][    T1] Code: fa 48 c7 c2 a0 a8 f4 8a be 2e 0a 00 00 48 c7 c7 40 a7 f4 8a c6 05 a2 69 74 06 01 e8 f2 e3 f1 01 e9 ef fd ff ff e8 e2 ae 24 fa <0f> 0b e9 8e fa ff ff 8b 6c 24 38 e8 d2 ae 24 fa 49 8d 7c 24 04 48
[    6.799643][    T1] RSP: 0018:ffffc90000067898 EFLAGS: 00010293
[    6.799643][    T1] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[    6.799643][    T1] RDX: ffff88813fe50000 RSI: ffffffff8757dc0e RDI: 0000000000000004
[    6.799643][    T1] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000002
[    6.799643][    T1] R10: 0000000000000002 R11: 000000000008c07e R12: ffff88801fb48680
[    6.799643][    T1] R13: 0000000000000003 R14: ffff88801fb48698 R15: 0000000000000002
[    6.799643][    T1]  ? __netif_set_xps_queue+0x88e/0x1f30
[    6.799643][    T1]  ? __netif_set_xps_queue+0x88e/0x1f30
[    6.799643][    T1]  ? vp_bus_name+0xc0/0xc0
[    6.799643][    T1]  virtnet_set_affinity+0x4f0/0x750
[    6.799643][    T1]  ? skb_recv_done+0x120/0x120
[    6.799643][    T1]  virtnet_probe+0x12ae/0x31e0
[    6.799643][    T1]  ? virtnet_find_vqs+0xc30/0xc30
[    6.799643][    T1]  virtio_dev_probe+0x577/0x870
[    6.799643][    T1]  ? virtio_features_ok+0x1e0/0x1e0
[    6.799643][    T1]  really_probe+0x249/0xb90
[    6.799643][    T1]  __driver_probe_device+0x1df/0x4d0
[    6.799643][    T1]  driver_probe_device+0x4c/0x1a0
[    6.799643][    T1]  __driver_attach+0x1d0/0x550
[    6.799643][    T1]  ? __device_attach_driver+0x2e0/0x2e0
[    6.799643][    T1]  bus_for_each_dev+0x147/0x1d0
[    6.799643][    T1]  ? subsys_dev_iter_exit+0x20/0x20
[    6.799643][    T1]  bus_add_driver+0x4c9/0x640
[    6.799643][    T1]  driver_register+0x220/0x3a0
[    6.799643][    T1]  ? veth_init+0x11/0x11
[    6.829623][    T1]  virtio_net_driver_init+0x93/0xd2
[    6.829623][    T1]  do_one_initcall+0x13d/0x780
[    6.829623][    T1]  ? trace_event_raw_event_initcall_level+0x1f0/0x1f0
[    6.829623][    T1]  ? parameq+0x140/0x170
[    6.829623][    T1]  kernel_init_freeable+0x6ff/0x788
[    6.829623][    T1]  ? rest_init+0x270/0x270
[    6.829623][    T1]  kernel_init+0x1a/0x1d0
[    6.829623][    T1]  ? rest_init+0x270/0x270
[    6.829623][    T1]  ret_from_fork+0x1f/0x30
[    6.829623][    T1]  </TASK>
[    6.829623][    T1] Kernel Offset: disabled
[    6.829623][    T1] Rebooting in 86400 seconds..


syzkaller build log:
go env (err=<nil>)
GO111MODULE="auto"
GOARCH="amd64"
GOBIN=""
GOCACHE="/syzkaller/.cache/go-build"
GOENV="/syzkaller/.config/go/env"
GOEXE=""
GOEXPERIMENT=""
GOFLAGS=""
GOHOSTARCH="amd64"
GOHOSTOS="linux"
GOINSECURE=""
GOMODCACHE="/syzkaller/jobs/linux/gopath/pkg/mod"
GONOPROXY=""
GONOSUMDB=""
GOOS="linux"
GOPATH="/syzkaller/jobs/linux/gopath"
GOPRIVATE=""
GOPROXY="https://proxy.golang.org,direct"
GOROOT="/usr/local/go"
GOSUMDB="sum.golang.org"
GOTMPDIR=""
GOTOOLDIR="/usr/local/go/pkg/tool/linux_amd64"
GOVCS=""
GOVERSION="go1.17"
GCCGO="gccgo"
AR="ar"
CC="gcc"
CXX="g++"
CGO_ENABLED="1"
GOMOD="/syzkaller/jobs/linux/gopath/src/github.com/google/syzkaller/go.mod"
CGO_CFLAGS="-g -O2"
CGO_CPPFLAGS=""
CGO_CXXFLAGS="-g -O2"
CGO_FFLAGS="-g -O2"
CGO_LDFLAGS="-g -O2"
PKG_CONFIG="pkg-config"
GOGCCFLAGS="-fPIC -m64 -pthread -fmessage-length=0 -fdebug-prefix-map=/tmp/go-build2307492022=/tmp/go-build -gno-record-gcc-switches"

git status (err=<nil>)
HEAD detached at b31320fc8
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:32: run command via tools/syz-env for best compatibility, see:
Makefile:33: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' ./sys/syz-sysgen | grep -q false || go install ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=b31320fc8f3519e40494f64ebf77c13d16284bfd -X 'github.com/google/syzkaller/prog.gitRevisionDate=20221018-073740'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-fuzzer github.com/google/syzkaller/syz-fuzzer
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=b31320fc8f3519e40494f64ebf77c13d16284bfd -X 'github.com/google/syzkaller/prog.gitRevisionDate=20221018-073740'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
GOOS=linux GOARCH=amd64 go build "-ldflags=-s -w -X github.com/google/syzkaller/prog.GitRevision=b31320fc8f3519e40494f64ebf77c13d16284bfd -X 'github.com/google/syzkaller/prog.gitRevisionDate=20221018-073740'" "-tags=syz_target syz_os_linux syz_arch_amd64 " -o ./bin/linux_amd64/syz-stress github.com/google/syzkaller/tools/syz-stress
mkdir -p ./bin/linux_amd64
gcc -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -static-pie -fpermissive -w -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"b31320fc8f3519e40494f64ebf77c13d16284bfd\"


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=16f2e14a880000


Tested on:

commit:         aae703b0 Merge tag 'for-6.1-rc1-tag' of git://git.kern..
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel config:  https://syzkaller.appspot.com/x/.config?x=ea03ca45176080bc
dashboard link: https://syzkaller.appspot.com/bug?extid=6bc35f3913193fe7f0d3
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch:          https://syzkaller.appspot.com/x/patch.diff?x=135783e6880000


       reply	other threads:[~2022-10-21  3:45 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20221021032341.1481-1-hdanton@sina.com>
2022-10-21  3:45 ` syzbot [this message]
     [not found] <20221021133530.1693-1-hdanton@sina.com>
2022-10-21 13:59 ` [syzbot] KASAN: use-after-free Read in kernfs_next_descendant_post (2) syzbot
     [not found] <20221021092625.1602-1-hdanton@sina.com>
2022-10-21  9:44 ` syzbot
     [not found] <20221021071306.1535-1-hdanton@sina.com>
2022-10-21  7:29 ` syzbot
     [not found] <20221020105004.1341-1-hdanton@sina.com>
2022-10-20 21:30 ` syzbot
2021-10-04 12:57 syzbot
2022-10-20  7:15 ` syzbot
     [not found]   ` <20221021225228.1750-1-hdanton@sina.com>
2022-10-22  6:55     ` syzbot
2022-10-31 22:53     ` Tejun Heo
2022-11-14 17:34       ` Luis Chamberlain
2022-11-14 18:07         ` Dmitry Torokhov
2022-11-15 19:35           ` Luis Chamberlain
2022-11-15 20:12             ` Dmitry Torokhov
2022-11-15 22:14             ` Tejun Heo
2022-11-15  6:27         ` Dmitry Vyukov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=00000000000064d19605eb8345de@google.com \
    --to=syzbot+6bc35f3913193fe7f0d3@syzkaller.appspotmail.com \
    --cc=hdanton@sina.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.