From: syzbot <syzbot+e7499dac4bd3955773ed@syzkaller.appspotmail.com>
To: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, rafael@kernel.org,
syzkaller-bugs@googlegroups.com
Subject: [syzbot] usb-testing boot error: general protection fault in driver_register
Date: Sun, 28 Aug 2022 03:44:26 -0700 [thread overview]
Message-ID: <000000000000c3da4d05e74ad4fc@google.com> (raw)
Hello,
syzbot found the following issue on:
HEAD commit: 4dce3b375179 usb/hcd: Fix dma_map_sg error check
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
console output: https://syzkaller.appspot.com/x/log.txt?x=10344fd3080000
kernel config: https://syzkaller.appspot.com/x/.config?x=3cb39b084894e9a5
dashboard link: https://syzkaller.appspot.com/bug?extid=e7499dac4bd3955773ed
compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+e7499dac4bd3955773ed@syzkaller.appspotmail.com
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000bbffd000-0x00000000bfffd000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb6b90ffa2, max_idle_ns: 440795278193 ns
clocksource: Switched to clocksource tsc
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
9p: Installing v9fs 9p2000 file system support
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
usbcore: registered new interface driver udlfb
usbcore: registered new interface driver smscufx
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: button: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: button: Sleep Button [SLPF]
ACPI: \_SB_.LNKC: Enabled at IRQ 11
virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKD: Enabled at IRQ 10
virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKB: Enabled at IRQ 10
virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
usbcore: registered new interface driver udl
loop: module loaded
usbcore: registered new interface driver rtsx_usb
usbcore: registered new interface driver viperboard
usbcore: registered new interface driver dln2
usbcore: registered new interface driver pn533_usb
usbcore: registered new interface driver port100
usbcore: registered new interface driver nfcmrvl
scsi host0: Virtio SCSI HBA
scsi 0:0:1:0: Direct-Access Google PersistentDisk 1 PQ: 0 ANSI: 6
sd 0:0:1:0: Attached scsi generic sg0 type 0
Rounding down aligned max_sectors from 4294967295 to 4294967288
db_root: cannot open: /etc/target
general protection fault, probably for non-canonical address 0xffff000000000800: 0000 [#1] PREEMPT SMP KASAN
KASAN: maybe wild-memory-access in range [0xfff8200000004000-0xfff8200000004007]
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-syzkaller-00028-g4dce3b375179 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:freelist_dereference mm/slub.c:347 [inline]
RIP: 0010:get_freepointer mm/slub.c:354 [inline]
RIP: 0010:get_freepointer_safe mm/slub.c:368 [inline]
RIP: 0010:slab_alloc_node mm/slub.c:3211 [inline]
RIP: 0010:slab_alloc mm/slub.c:3251 [inline]
RIP: 0010:kmem_cache_alloc_trace+0x15e/0x3b0 mm/slub.c:3282
Code: 8b 51 08 48 8b 01 48 83 79 10 00 48 89 44 24 08 0f 84 9d 01 00 00 48 85 c0 0f 84 94 01 00 00 48 8b 7d 00 8b 4d 28 40 f6 c7 0f <48> 8b 1c 08 0f 85 a0 01 00 00 48 8d 4a 08 65 48 0f c7 0f 0f 94 c0
RSP: 0000:ffffc9000001fce8 EFLAGS: 00010246
RAX: ffff000000000000 RBX: 0000000000000000 RCX: 0000000000000800
RDX: 0000000000000d39 RSI: 0000000000000dc0 RDI: 000000000003b470
RBP: ffff888100042140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000dc0
R13: 0000000000000a20 R14: 0000000000000dc0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8881f6900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000007825000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
kmalloc include/linux/slab.h:600 [inline]
kzalloc include/linux/slab.h:733 [inline]
kobject_uevent_env+0x230/0x1640 lib/kobject_uevent.c:524
driver_register+0x2db/0x3a0 drivers/base/driver.c:248
virtio_net_driver_init+0x93/0xd2 drivers/net/virtio_net.c:4108
do_one_initcall+0xfe/0x650 init/main.c:1296
do_initcall_level init/main.c:1369 [inline]
do_initcalls init/main.c:1385 [inline]
do_basic_setup init/main.c:1404 [inline]
kernel_init_freeable+0x6ac/0x735 init/main.c:1611
kernel_init+0x1a/0x1d0 init/main.c:1500
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:freelist_dereference mm/slub.c:347 [inline]
RIP: 0010:get_freepointer mm/slub.c:354 [inline]
RIP: 0010:get_freepointer_safe mm/slub.c:368 [inline]
RIP: 0010:slab_alloc_node mm/slub.c:3211 [inline]
RIP: 0010:slab_alloc mm/slub.c:3251 [inline]
RIP: 0010:kmem_cache_alloc_trace+0x15e/0x3b0 mm/slub.c:3282
Code: 8b 51 08 48 8b 01 48 83 79 10 00 48 89 44 24 08 0f 84 9d 01 00 00 48 85 c0 0f 84 94 01 00 00 48 8b 7d 00 8b 4d 28 40 f6 c7 0f <48> 8b 1c 08 0f 85 a0 01 00 00 48 8d 4a 08 65 48 0f c7 0f 0f 94 c0
RSP: 0000:ffffc9000001fce8 EFLAGS: 00010246
RAX: ffff000000000000 RBX: 0000000000000000 RCX: 0000000000000800
RDX: 0000000000000d39 RSI: 0000000000000dc0 RDI: 000000000003b470
RBP: ffff888100042140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000dc0
R13: 0000000000000a20 R14: 0000000000000dc0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8881f6900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000007825000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
----------------
Code disassembly (best guess):
0: 8b 51 08 mov 0x8(%rcx),%edx
3: 48 8b 01 mov (%rcx),%rax
6: 48 83 79 10 00 cmpq $0x0,0x10(%rcx)
b: 48 89 44 24 08 mov %rax,0x8(%rsp)
10: 0f 84 9d 01 00 00 je 0x1b3
16: 48 85 c0 test %rax,%rax
19: 0f 84 94 01 00 00 je 0x1b3
1f: 48 8b 7d 00 mov 0x0(%rbp),%rdi
23: 8b 4d 28 mov 0x28(%rbp),%ecx
26: 40 f6 c7 0f test $0xf,%dil
* 2a: 48 8b 1c 08 mov (%rax,%rcx,1),%rbx <-- trapping instruction
2e: 0f 85 a0 01 00 00 jne 0x1d4
34: 48 8d 4a 08 lea 0x8(%rdx),%rcx
38: 65 48 0f c7 0f cmpxchg16b %gs:(%rdi)
3d: 0f 94 c0 sete %al
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
reply other threads:[~2022-08-28 10:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=000000000000c3da4d05e74ad4fc@google.com \
--to=syzbot+e7499dac4bd3955773ed@syzkaller.appspotmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.