From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753047Ab3HZUzz (ORCPT ); Mon, 26 Aug 2013 16:55:55 -0400 Received: from a10-13.smtp-out.amazonses.com ([54.240.10.13]:55611 "EHLO a10-13.smtp-out.amazonses.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752160Ab3HZUzx (ORCPT ); Mon, 26 Aug 2013 16:55:53 -0400 X-Greylist: delayed 671 seconds by postgrey-1.27 at vger.kernel.org; Mon, 26 Aug 2013 16:55:53 EDT Message-ID: <00000140bc5f0925-9b66638b-9a5e-48b0-ad71-86c89b619085-000000@email.amazonses.com> User-Agent: quilt/0.50-1 Date: Mon, 26 Aug 2013 20:44:39 +0000 From: Christoph Lameter To: Tejun Heo Cc: akpm@linuxfoundation.org, Wim Van Sebroeck , linux-watchdog@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Steven Rostedt Cc: linux-kernel@vger.kernel.org Subject: [guv v2 12/31] watchdog: Replace __get_cpu_var uses References: <20130826204351.725357339@linux.com> X-SES-Outgoing: 2013.08.26-54.240.10.13 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Others usage cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does a address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either and explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calcualtions are avoided and less registers are used when code is generated. At the end of the patchset all uses of __get_cpu_var have been removed so the macro is removed too. The patchset includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, u); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(this_cpu_ptr(&y), x, sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Signed-off-by: Christoph Lameter Index: linux/kernel/watchdog.c =================================================================== --- linux.orig/kernel/watchdog.c 2013-08-26 14:28:39.000000000 -0500 +++ linux/kernel/watchdog.c 2013-08-26 14:29:34.471034451 -0500 @@ -174,8 +174,8 @@ EXPORT_SYMBOL(touch_nmi_watchdog); void touch_softlockup_watchdog_sync(void) { - __raw_get_cpu_var(softlockup_touch_sync) = true; - __raw_get_cpu_var(watchdog_touch_ts) = 0; + __this_cpu_write(softlockup_touch_sync, 1); + __this_cpu_write(watchdog_touch_ts, 0); } #ifdef CONFIG_HARDLOCKUP_DETECTOR @@ -341,7 +341,7 @@ static void watchdog_set_prio(unsigned i static void watchdog_enable(unsigned int cpu) { - struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer); + struct hrtimer *hrtimer = __this_cpu_ptr(&watchdog_hrtimer); /* kick off the timer for the hardlockup detector */ hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); @@ -361,7 +361,7 @@ static void watchdog_enable(unsigned int static void watchdog_disable(unsigned int cpu) { - struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer); + struct hrtimer *hrtimer = __this_cpu_ptr(&watchdog_hrtimer); watchdog_set_prio(SCHED_NORMAL, 0); hrtimer_cancel(hrtimer); From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christoph Lameter Subject: [guv v2 12/31] watchdog: Replace __get_cpu_var uses Date: Mon, 26 Aug 2013 20:44:39 +0000 Message-ID: <00000140bc5f0925-9b66638b-9a5e-48b0-ad71-86c89b619085-000000@email.amazonses.com> References: <20130826204351.725357339@linux.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Tejun Heo Cc: akpm@linuxfoundation.org, Wim Van Sebroeck , linux-watchdog@vger.kernel.org, linux-arch@vger.kernel.org, Steven Rostedt , linux-kernel@vger.kernel.org List-Id: linux-arch.vger.kernel.org __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Others usage cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does a address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either and explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calcualtions are avoided and less registers are used when code is generated. At the end of the patchset all uses of __get_cpu_var have been removed so the macro is removed too. The patchset includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, u); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(this_cpu_ptr(&y), x, sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Signed-off-by: Christoph Lameter Index: linux/kernel/watchdog.c =================================================================== --- linux.orig/kernel/watchdog.c 2013-08-26 14:28:39.000000000 -0500 +++ linux/kernel/watchdog.c 2013-08-26 14:29:34.471034451 -0500 @@ -174,8 +174,8 @@ EXPORT_SYMBOL(touch_nmi_watchdog); void touch_softlockup_watchdog_sync(void) { - __raw_get_cpu_var(softlockup_touch_sync) = true; - __raw_get_cpu_var(watchdog_touch_ts) = 0; + __this_cpu_write(softlockup_touch_sync, 1); + __this_cpu_write(watchdog_touch_ts, 0); } #ifdef CONFIG_HARDLOCKUP_DETECTOR @@ -341,7 +341,7 @@ static void watchdog_set_prio(unsigned i static void watchdog_enable(unsigned int cpu) { - struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer); + struct hrtimer *hrtimer = __this_cpu_ptr(&watchdog_hrtimer); /* kick off the timer for the hardlockup detector */ hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); @@ -361,7 +361,7 @@ static void watchdog_enable(unsigned int static void watchdog_disable(unsigned int cpu) { - struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer); + struct hrtimer *hrtimer = __this_cpu_ptr(&watchdog_hrtimer); watchdog_set_prio(SCHED_NORMAL, 0); hrtimer_cancel(hrtimer);