From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Atechsystem" Subject: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 18:06:05 +0100 Message-ID: <009301ccea71$c6d58db0$5480a910$@freenet.de> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="===============0521821168==" Return-path: Received: from mout2.freenet.de (mout2.freenet.de [195.4.92.92]) by gabe.freedesktop.org (Postfix) with ESMTP id 5DE1A9E7E7 for ; Mon, 13 Feb 2012 09:08:25 -0800 (PST) Content-Language: de List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: daniel@ffwll.ch Cc: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org This is a multipart message in MIME format. --===============0521821168== Content-Type: multipart/alternative; boundary="----=_NextPart_000_0094_01CCEA7A.289C8DC0" Content-Language: de This is a multipart message in MIME format. ------=_NextPart_000_0094_01CCEA7A.289C8DC0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi, I compiled the kernel from your git repro to test interlaced output with my Clarkdale (H55) Chipset. After installing and reboot I put the interlaced line to my xorg.conf and activate them (first by xorg.conf and after that by lxdm resolution set tool). I only get a screen full of colored stripes after switching from progressive to interlaced mode. My TV shows 1080i as input mode. After that I read all mode lines from my TV by using the xorg server log and tried every interlaced modeline I found but always the same striped screen. To get sure that I use correct modelines I checked them with an plugged in card from another brand and it works immediately. Hardware: - Intel H55 Chipset with Core I5 661 and another one with Core I3 540 CPU - HDMI and VGA connected to my TV (VGA didn't show any screen with x and interlaced modes) - Samsung LE32A557 TV Software: - Arch Linux with your kernel 3.3.0 rc1 (compiled yesterday) - xorg-server 1.11.3-1 - xf86-video-intel 2.17.0-2 @list: Anyone with Clarkdale and running interlaced mode? Thanks and best regards Atech ------=_NextPart_000_0094_01CCEA7A.289C8DC0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Hi,

I compiled the kernel from your git repro to test = interlaced output with my Clarkdale (H55) Chipset. After installing and = reboot I put the interlaced line to my xorg.conf and activate them = (first by xorg.conf and after that by lxdm resolution set tool). =

I only get = a screen full of colored stripes after switching from progressive to = interlaced mode. My TV shows 1080i as input mode. After that = I read all mode lines from my TV by using the xorg server log and tried = every interlaced modeline I found but always the same striped screen. To = get sure that I use correct modelines I checked them with an plugged in = card from another brand and it works = immediately.

Hardware:

- = Intel H55 Chipset with = Core I5 661 and another one with Core I3 540 CPU

- = HDMI and VGA connected = to my TV (VGA didn’t show any screen with x and interlaced = modes)

- = Samsung LE32A557 = TV

Software:

- = Arch Linux with your = kernel 3.3.0 rc1 (compiled yesterday)

- = xorg-server 1.11.3-1

- = xf86-video-intel 2.17.0-2

@list: Anyone with Clarkdale and running interlaced = mode?

Thanks and best regards

Atech

------=_NextPart_000_0094_01CCEA7A.289C8DC0-- --===============0521821168== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx --===============0521821168==-- From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paulo Zanoni Subject: Re: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 15:57:51 -0200 Message-ID: References: <009301ccea71$c6d58db0$5480a910$@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mail-ww0-f43.google.com (mail-ww0-f43.google.com [74.125.82.43]) by gabe.freedesktop.org (Postfix) with ESMTP id BE12B9ED8C for ; Mon, 13 Feb 2012 09:57:52 -0800 (PST) Received: by wgbdr13 with SMTP id dr13so4179032wgb.12 for ; Mon, 13 Feb 2012 09:57:52 -0800 (PST) In-Reply-To: <009301ccea71$c6d58db0$5480a910$@freenet.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: Atechsystem Cc: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org Hi 2012/2/13 Atechsystem : > I compiled the kernel from your git repro to test interlaced output with = my > Clarkdale (H55) Chipset. Which git repo and which branch exactly? You may have a repo without the patches that fix interlaced modes. > After installing and reboot I put the interlaced > line to my xorg.conf and activate them (first by xorg.conf and after that= by > lxdm resolution set tool). Which line did you add to xorg.conf? What exactly did you do in this step? Please try to remove every xorg configuration file and test again with the default configuration > > I only get a screen full of colored stripes after switching from progress= ive > to interlaced mode. =A0My=A0 TV shows 1080i as input mode. After that I r= ead all > mode lines from my TV by using the xorg server log and tried every > interlaced modeline I found but always the same striped screen. To get su= re > that I use correct modelines I checked them with an plugged in card from > another brand and it works immediately. Please attach the TV, then run "xrandr --verbose" and send us the output. Please also send the output of intel_reg_dumper: http://intellinuxgraphics.org/intel_reg_dumper.html -- = Paulo Zanoni From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Atechsystem" Subject: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 19:44:41 +0100 Message-ID: <00b901ccea7f$8c920df0$a5b629d0$@freenet.de> References: <009301ccea71$c6d58db0$5480a910$@freenet.de> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_00BA_01CCEA87.EE573940" Return-path: Received: from mout2.freenet.de (mout2.freenet.de [195.4.92.92]) by gabe.freedesktop.org (Postfix) with ESMTP id 4F60B9F5C1 for ; Mon, 13 Feb 2012 10:47:50 -0800 (PST) In-Reply-To: Content-Language: de List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org This is a multipart message in MIME format. ------=_NextPart_000_00BA_01CCEA87.EE573940 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable -----Urspr=FCngliche Nachricht----- Von: Atechsystem [mailto:Atechsystem@freenet.de]=20 Gesendet: Montag, 13. Februar 2012 19:44 An: 'Paulo Zanoni' Betreff: AW: [Intel-gfx] Interlaced mode on intel Clarkdale only colored stripes Hi, thanks for your quick reply. >Paulo Zanoni [mailto:przanoni@gmail.com] Which git repo and which=20 >branch exactly? You may have a repo without the patches that fix = interlaced modes. I compiled it from here: git://people.freedesktop.org/~danvet/drm >Which line did you add to xorg.conf? What exactly did you do in this=20 >step? Please try to remove every xorg configuration file and test again = >with the default configuration I added for example: Modeline "1920x1080@50i" 74.25 1920 2448 2492 2640 1080 1084 1094 1124 interlace +hsync +vsync Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, = 30Hz, 25Hz and 24Hz. >Please attach the TV, then run "xrandr --verbose" and send us the = output. Please also send the output of intel_reg_dumper: >http://intellinuxgraphics.org/intel_reg_dumper.html Please find files attached. -----Urspr=FCngliche Nachricht----- Von: Paulo Zanoni [mailto:przanoni@gmail.com] Gesendet: Montag, 13. Februar 2012 18:58 An: Atechsystem Cc: daniel@ffwll.ch; intel-gfx@lists.freedesktop.org Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored stripes Hi 2012/2/13 Atechsystem : > I compiled the kernel from your git repro to test interlaced output=20 > with my Clarkdale (H55) Chipset. Which git repo and which branch exactly? You may have a repo without the patches that fix interlaced modes. > After installing and reboot I put the interlaced line to my xorg.conf=20 > and activate them (first by xorg.conf and after that by lxdm=20 > resolution set tool). Which line did you add to xorg.conf? What exactly did you do in this = step? Please try to remove every xorg configuration file and test again with = the default configuration > > I only get a screen full of colored stripes after switching from=20 > progressive to interlaced mode. =A0My=A0 TV shows 1080i as input mode. > After that I read all mode lines from my TV by using the xorg server=20 > log and tried every interlaced modeline I found but always the same=20 > striped screen. To get sure that I use correct modelines I checked=20 > them with an plugged in card from another brand and it works = immediately. Please attach the TV, then run "xrandr --verbose" and send us the = output. Please also send the output of intel_reg_dumper: http://intellinuxgraphics.org/intel_reg_dumper.html -- Paulo Zanoni ------=_NextPart_000_00BA_01CCEA87.EE573940 Content-Type: text/plain; name="intel_reg_dumper.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="intel_reg_dumper.txt" PGETBL_CTL: 0x00000008=0A= GEN6_INSTDONE_1: 0xfffffffe=0A= GEN6_INSTDONE_2: 0xffffffff=0A= CPU_VGACNTRL: 0x80000000 (disabled)=0A= DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000=0A= RR_HW_CTL: 0x00000000 (low 0, high 0)=0A= FDI_PLL_BIOS_0: 0x082b3019=0A= FDI_PLL_BIOS_1: 0x00000000=0A= FDI_PLL_BIOS_2: 0x00000000=0A= DISPLAY_PORT_PLL_BIOS_0: 0x0807012b=0A= DISPLAY_PORT_PLL_BIOS_1: 0x00000000=0A= DISPLAY_PORT_PLL_BIOS_2: 0x00000000=0A= FDI_PLL_FREQ_CTL: 0x00053687=0A= PIPEACONF: 0xc0000000 (enabled, active, 8bpc)=0A= HTOTAL_A: 0x0897077f (1920 active, 2200 total)=0A= HBLANK_A: 0x0897077f (1920 start, 2200 end)=0A= HSYNC_A: 0x080307d7 (2008 start, 2052 end)=0A= VTOTAL_A: 0x04640437 (1080 active, 1125 total)=0A= VBLANK_A: 0x04640437 (1080 start, 1125 end)=0A= VSYNC_A: 0x0440043b (1084 start, 1089 end)=0A= VSYNCSHIFT_A: 0x00000000=0A= PIPEASRC: 0x077f0437 (1920, 1080)=0A= PIPEA_DATA_M1: 0x7e3661e0 (TU 64, val 0x3661e0 3564000)=0A= PIPEA_DATA_N1: 0x0041eb00 (val 0x41eb00 4320000)=0A= PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)=0A= PIPEA_DATA_N2: 0x00000000 (val 0x0 0)=0A= PIPEA_LINK_M1: 0x00024414 (val 0x24414 148500)=0A= PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)=0A= PIPEA_LINK_M2: 0x00000000 (val 0x0 0)=0A= PIPEA_LINK_N2: 0x00000000 (val 0x0 0)=0A= DSPACNTR: 0xd8004000 (enabled)=0A= DSPABASE: 0x00000000=0A= DSPASTRIDE: 0x00001e00 (120)=0A= DSPASURF: 0x00043000=0A= DSPATILEOFF: 0x00000000 (0, 0)=0A= PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)=0A= HTOTAL_B: 0x031f027f (640 active, 800 total)=0A= HBLANK_B: 0x03170287 (648 start, 792 end)=0A= HSYNC_B: 0x02ef028f (656 start, 752 end)=0A= VTOTAL_B: 0x020c01df (480 active, 525 total)=0A= VBLANK_B: 0x020401e7 (488 start, 517 end)=0A= VSYNC_B: 0x01eb01e9 (490 start, 492 end)=0A= VSYNCSHIFT_B: 0x00000000=0A= DSPBCNTR: 0x00000000 (disabled)=0A= DSPBBASE: 0x00000000=0A= DSPBSTRIDE: 0x00000000 (0)=0A= DSPBSURF: 0x00000000=0A= DSPBTILEOFF: 0x00000000 (0, 0)=0A= PIPEBSRC: 0x027f01df (640, 480)=0A= PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)=0A= PIPEB_DATA_N1: 0x00000000 (val 0x0 0)=0A= PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)=0A= PIPEB_DATA_N2: 0x00000000 (val 0x0 0)=0A= PIPEB_LINK_M1: 0x00000000 (val 0x0 0)=0A= PIPEB_LINK_N1: 0x00000000 (val 0x0 0)=0A= PIPEB_LINK_M2: 0x00000000 (val 0x0 0)=0A= PIPEB_LINK_N2: 0x00000000 (val 0x0 0)=0A= PFA_CTL_1: 0x00000000 (disable, auto_scale yes, = auto_scale_cal no, v_filter enable, vadapt disable, mode least, = filter_sel programmed,chroma pre-filter disable, vert3tap auto, = v_inter_invert field 1)=0A= PFA_CTL_2: 0x00007de4 (vscale 0.983521)=0A= PFA_CTL_3: 0x00003ef2 (vscale initial phase = 0.491760)=0A= PFA_CTL_4: 0x00007c40 (hscale 0.970703)=0A= PFA_WIN_POS: 0x00000000 (0, 0)=0A= PFA_WIN_SIZE: 0x00000000 (0, 0)=0A= PFB_CTL_1: 0x00000000 (disable, auto_scale yes, = auto_scale_cal no, v_filter enable, vadapt disable, mode least, = filter_sel programmed,chroma pre-filter disable, vert3tap auto, = v_inter_invert field 1)=0A= PFB_CTL_2: 0x00000000 (vscale 0.000000)=0A= PFB_CTL_3: 0x00000000 (vscale initial phase = 0.000000)=0A= PFB_CTL_4: 0x00000000 (hscale 0.000000)=0A= PFB_WIN_POS: 0x00000000 (0, 0)=0A= PFB_WIN_SIZE: 0x00000000 (0, 0)=0A= PCH_DREF_CONTROL: 0x00000400 (cpu source disable, = ssc_source disable, nonspread_source enable, superspread_source disable, = ssc4_mode downspread, ssc1 disable, ssc4 disable)=0A= PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 = timer 1.5us, freq 125)=0A= PCH_DPLL_TMR_CFG: 0x0271186a=0A= PCH_SSC4_PARMS: 0x00000000=0A= PCH_SSC4_AUX_PARMS: 0x00000000=0A= PCH_DPLL_SEL: 0x00000000 (FDL_TP1 timer 0.5us, FDL_TP2 = timer 1.5us, freq 125)=0A= PCH_DPLL_ANALOG_CTL: 0x00008000=0A= PCH_DPLL_A: 0xc4020002 (enable, sdvo high speed yes, = mode (null), p2 (null), FPA0 P1 2, FPA1 P1 2, refclk default 120Mhz, = sdvo/hdmi mul 1)=0A= PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, = mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, = sdvo/hdmi mul 1)=0A= PCH_FPA0: 0x00021007 (n =3D 2, m1 =3D 16, m2 =3D 7)=0A= PCH_FPA1: 0x00021007 (n =3D 2, m1 =3D 16, m2 =3D 7)=0A= PCH_FPB0: 0x00030d07 (n =3D 3, m1 =3D 13, m2 =3D 7)=0A= PCH_FPB1: 0x00030d07 (n =3D 3, m1 =3D 13, m2 =3D 7)=0A= TRANS_HTOTAL_A: 0x0897077f (1920 active, 2200 total)=0A= TRANS_HBLANK_A: 0x0897077f (1920 start, 2200 end)=0A= TRANS_HSYNC_A: 0x080307d7 (2008 start, 2052 end)=0A= TRANS_VTOTAL_A: 0x04640437 (1080 active, 1125 total)=0A= TRANS_VBLANK_A: 0x04640437 (1080 start, 1125 end)=0A= TRANS_VSYNC_A: 0x0440043b (1084 start, 1089 end)=0A= TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)=0A= TRANSA_DATA_N1: 0x00000000 (val 0x0 0)=0A= TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)=0A= TRANSA_DATA_N2: 0x00000000 (val 0x0 0)=0A= TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)=0A= TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)=0A= TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)=0A= TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)=0A= TRANS_HTOTAL_B: 0x031f027f (640 active, 800 total)=0A= TRANS_HBLANK_B: 0x03170287 (648 start, 792 end)=0A= TRANS_HSYNC_B: 0x02ef028f (656 start, 752 end)=0A= TRANS_VTOTAL_B: 0x020c01df (480 active, 525 total)=0A= TRANS_VBLANK_B: 0x020401e7 (488 start, 517 end)=0A= TRANS_VSYNC_B: 0x01eb01e9 (490 start, 492 end)=0A= TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)=0A= TRANSB_DATA_N1: 0x00000000 (val 0x0 0)=0A= TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)=0A= TRANSB_DATA_N2: 0x00000000 (val 0x0 0)=0A= TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)=0A= TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)=0A= TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)=0A= TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)=0A= TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)=0A= TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)=0A= TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)=0A= TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)=0A= TRANS_VBLANK_C: 0x00000044 (69 start, 1 end)=0A= TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)=0A= TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)=0A= TRANSC_DATA_N1: 0x00000000 (val 0x0 0)=0A= TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)=0A= TRANSC_DATA_N2: 0x00000000 (val 0x0 0)=0A= TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)=0A= TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)=0A= TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)=0A= TRANSC_DP_LINK_N2: 0x00ffffff (val 0xffffff 16777215)=0A= TRANSACONF: 0xc0000000 (enable, active)=0A= TRANSBCONF: 0x00000000 (disable, inactive)=0A= TRANSCCONF: 0x00000000 (disable, inactive)=0A= FDI_TXA_CTL: 0xb00c4000 (enable, train pattern not = train, voltage swing 0.4V,pre-emphasis none, port width X2, enhanced = framing enable, FDI PLL enable, scrambing enable, master mode disable)=0A= FDI_TXB_CTL: 0x00044000 (disable, train pattern = pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced = framing enable, FDI PLL enable, scrambing enable, master mode disable)=0A= FDI_TXC_CTL: 0x00000000 (disable, train pattern = pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced = framing disable, FDI PLL disable, scrambing enable, master mode disable)=0A= FDI_RXA_CTL: 0xb0082050 (enable, train pattern not = train, port width X2, 8bpc,link_reverse_strap_overwrite no, = dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS = err report disable, FE err report disable,scrambing enable, enhanced = framing enable, PCDClk)=0A= FDI_RXB_CTL: 0x00000040 (disable, train pattern = pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, = dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS = err report disable, FE err report disable,scrambing enable, enhanced = framing enable, RawClk)=0A= FDI_RXC_CTL: 0x00000000 (disable, train pattern = pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, = dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS = err report disable, FE err report disable,scrambing enable, enhanced = framing disable, RawClk)=0A= FDI_RXA_MISC: 0x00000080 (FDI Delay 128)=0A= FDI_RXB_MISC: 0x00000080 (FDI Delay 128)=0A= FDI_RXC_MISC: 0x00000000 (FDI Delay 0)=0A= FDI_RXA_TUSIZE1: 0x7e000000=0A= FDI_RXA_TUSIZE2: 0x7e000000=0A= FDI_RXB_TUSIZE1: 0x7e000000=0A= FDI_RXB_TUSIZE2: 0x7e000000=0A= FDI_RXC_TUSIZE1: 0x00000000=0A= FDI_RXC_TUSIZE2: 0x00000000=0A= FDI_PLL_CTL_1: 0x33505248=0A= FDI_PLL_CTL_2: 0x00000000=0A= FDI_RXA_IIR: 0x00000000=0A= FDI_RXA_IMR: 0x000000ff=0A= FDI_RXB_IIR: 0x00000000=0A= FDI_RXB_IMR: 0x000000ff=0A= PCH_ADPA: 0x00f40018 (disabled, transcoder A, = +hsync, +vsync)=0A= HDMIB: 0x0000089c (disabled pipe A 8bpc TMDS = DVI audio disabled +vsync +hsync detected)=0A= HDMIC: 0x8000025c (enabled pipe A 8bpc SDVO = HDMI audio enabled +vsync +hsync detected)=0A= HDMID: 0x0000001c (disabled pipe A 8bpc SDVO = DVI audio disabled +vsync +hsync detected)=0A= PCH_LVDS: 0x40000000 (disabled, pipe B, 18 bit, 1 = channel)=0A= CPU_eDP_A: 0x00000018=0A= PCH_DP_B: 0x0000001c=0A= PCH_DP_C: 0x0000001c=0A= PCH_DP_D: 0x0000001c=0A= TRANS_DP_CTL_A: 0x00000000 (disabled, pipe B, 18 bit, 1 = channel)=0A= TRANS_DP_CTL_B: 0x00000000 (disabled, pipe B, 18 bit, 1 = channel)=0A= TRANS_DP_CTL_C: 0x00000000 (disabled, pipe B, 18 bit, 1 = channel)=0A= BLC_PWM_CPU_CTL2: 0x00000000=0A= BLC_PWM_CPU_CTL: 0x00000000=0A= BLC_PWM_PCH_CTL1: 0x00000000=0A= BLC_PWM_PCH_CTL2: 0x00000000=0A= PCH_PP_STATUS: 0x00000000 (off, not ready, sequencing = idle)=0A= PCH_PP_CONTROL: 0xabcd0000 (blacklight disabled, do not = power down on reset, panel off)=0A= PCH_PP_ON_DELAYS: 0x00000000=0A= PCH_PP_OFF_DELAYS: 0x00000000=0A= PCH_PP_DIVISOR: 0x00186904=0A= ------=_NextPart_000_00BA_01CCEA87.EE573940 Content-Type: text/plain; name="verbose.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="verbose.txt" Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192=0A= VGA1 disconnected (normal left inverted right x axis y axis)=0A= Identifier: 0x41=0A= Timestamp: 135826=0A= Subpixel: unknown=0A= Clones: =0A= CRTCs: 0 1=0A= Transform: 1.000000 0.000000 0.000000=0A= 0.000000 1.000000 0.000000=0A= 0.000000 0.000000 1.000000=0A= filter: =0A= HDMI1 disconnected (normal left inverted right x axis y axis)=0A= Identifier: 0x42=0A= Timestamp: 135826=0A= Subpixel: unknown=0A= Clones: =0A= CRTCs: 0 1=0A= Transform: 1.000000 0.000000 0.000000=0A= 0.000000 1.000000 0.000000=0A= 0.000000 0.000000 1.000000=0A= filter: =0A= Broadcast RGB: Full=0A= supported: Full Limited 16:2=0A= audio: auto=0A= supported: off auto on =0A= DP1 disconnected (normal left inverted right x axis y axis)=0A= Identifier: 0x43=0A= Timestamp: 135826=0A= Subpixel: unknown=0A= Clones: =0A= CRTCs: 0 1=0A= Transform: 1.000000 0.000000 0.000000=0A= 0.000000 1.000000 0.000000=0A= 0.000000 0.000000 1.000000=0A= filter: =0A= Broadcast RGB: Full=0A= supported: Full Limited 16:2=0A= audio: auto=0A= supported: off auto on =0A= HDMI2 connected 1920x1080+0+0 (0x48) normal (normal left inverted right = x axis y axis) 160mm x 90mm=0A= Identifier: 0x44=0A= Timestamp: 135826=0A= Subpixel: unknown=0A= Gamma: 1.0:1.0:1.0=0A= Brightness: 1.0=0A= Clones: =0A= CRTC: 0=0A= CRTCs: 0 1=0A= Transform: 1.000000 0.000000 0.000000=0A= 0.000000 1.000000 0.000000=0A= 0.000000 0.000000 1.000000=0A= filter: =0A= EDID:=0A= 00ffffffffffff004c2dbc0300000000=0A= 2f110103801009780aee91a3544c9926=0A= 0f50542108008180a940010101010101=0A= 010101010101023a801871382d40582c=0A= 4500a05a0000001e662150b051001b30=0A= 40703600a05a0000001e000000fd0017=0A= 3d1a4c17000a202020202020000000fc=0A= 0053414d53554e470a202020202001d3=0A= 020327f14b901f041305140312202122=0A= 2309070783010000e2000fe305030167=0A= 030c002000b82d011d007251d01e206e=0A= 285500a05a0000001e011d00bc52d01e=0A= 20b8285540a05a0000001e011d801871=0A= 1c1620582c2500a05a0000009e011d80=0A= d0721c1620102c2580a05a0000009e00=0A= 0000000000000000000000000000000d=0A= Broadcast RGB: Full=0A= supported: Full Limited 16:2=0A= audio: auto=0A= supported: off auto on =0A= 1920x1080 (0x48) 148.5MHz +HSync +VSync *current +preferred=0A= h: width 1920 start 2008 end 2052 total 2200 skew 0 clock = 67.5KHz=0A= v: height 1080 start 1084 end 1089 total 1125 clock = 60.0Hz=0A= 1920x1080 (0x49) 148.5MHz +HSync +VSync=0A= h: width 1920 start 2448 end 2492 total 2640 skew 0 clock = 56.2KHz=0A= v: height 1080 start 1084 end 1089 total 1125 clock = 50.0Hz=0A= 1920x1080 (0x4a) 74.2MHz +HSync +VSync=0A= h: width 1920 start 2008 end 2052 total 2200 skew 0 clock = 33.8KHz=0A= v: height 1080 start 1084 end 1089 total 1125 clock = 30.0Hz=0A= 1920x1080 (0x4b) 74.2MHz +HSync +VSync=0A= h: width 1920 start 2448 end 2492 total 2640 skew 0 clock = 28.1KHz=0A= v: height 1080 start 1084 end 1089 total 1125 clock = 25.0Hz=0A= 1920x1080 (0x4c) 74.2MHz +HSync +VSync=0A= h: width 1920 start 2558 end 2602 total 2750 skew 0 clock = 27.0KHz=0A= v: height 1080 start 1084 end 1089 total 1125 clock = 24.0Hz=0A= 1600x1200 (0x4d) 162.0MHz +HSync +VSync=0A= h: width 1600 start 1664 end 1856 total 2160 skew 0 clock = 75.0KHz=0A= v: height 1200 start 1201 end 1204 total 1250 clock = 60.0Hz=0A= 1280x1024 (0x4e) 108.0MHz +HSync +VSync=0A= h: width 1280 start 1328 end 1440 total 1688 skew 0 clock = 64.0KHz=0A= v: height 1024 start 1025 end 1028 total 1066 clock = 60.0Hz=0A= 1360x768 (0x4f) 85.5MHz +HSync +VSync=0A= h: width 1360 start 1424 end 1536 total 1792 skew 0 clock = 47.7KHz=0A= v: height 768 start 771 end 777 total 795 clock = 60.0Hz=0A= 1280x720 (0x50) 74.2MHz +HSync +VSync=0A= h: width 1280 start 1720 end 1760 total 1980 skew 0 clock = 37.5KHz=0A= v: height 720 start 725 end 730 total 750 clock = 50.0Hz=0A= 1280x720 (0x51) 74.2MHz +HSync +VSync=0A= h: width 1280 start 1390 end 1430 total 1650 skew 0 clock = 45.0KHz=0A= v: height 720 start 725 end 730 total 750 clock = 60.0Hz=0A= 1024x768 (0x52) 65.0MHz -HSync -VSync=0A= h: width 1024 start 1048 end 1184 total 1344 skew 0 clock = 48.4KHz=0A= v: height 768 start 771 end 777 total 806 clock = 60.0Hz=0A= 800x600 (0x53) 40.0MHz +HSync +VSync=0A= h: width 800 start 840 end 968 total 1056 skew 0 clock = 37.9KHz=0A= v: height 600 start 601 end 605 total 628 clock = 60.3Hz=0A= 720x576 (0x54) 27.0MHz -HSync -VSync=0A= h: width 720 start 732 end 796 total 864 skew 0 clock = 31.2KHz=0A= v: height 576 start 581 end 586 total 625 clock = 50.0Hz=0A= 720x480 (0x55) 27.0MHz -HSync -VSync=0A= h: width 720 start 736 end 798 total 858 skew 0 clock = 31.5KHz=0A= v: height 480 start 489 end 495 total 525 clock = 59.9Hz=0A= 640x480 (0x56) 25.2MHz -HSync -VSync=0A= h: width 640 start 656 end 752 total 800 skew 0 clock = 31.5KHz=0A= v: height 480 start 490 end 492 total 525 clock = 60.0Hz=0A= HDMI3 disconnected (normal left inverted right x axis y axis)=0A= Identifier: 0x45=0A= Timestamp: 135826=0A= Subpixel: unknown=0A= Clones: =0A= CRTCs: 0 1=0A= Transform: 1.000000 0.000000 0.000000=0A= 0.000000 1.000000 0.000000=0A= 0.000000 0.000000 1.000000=0A= filter: =0A= Broadcast RGB: Full=0A= supported: Full Limited 16:2=0A= audio: auto=0A= supported: off auto on =0A= DP2 disconnected (normal left inverted right x axis y axis)=0A= Identifier: 0x46=0A= Timestamp: 135826=0A= Subpixel: unknown=0A= Clones: =0A= CRTCs: 0 1=0A= Transform: 1.000000 0.000000 0.000000=0A= 0.000000 1.000000 0.000000=0A= 0.000000 0.000000 1.000000=0A= filter: =0A= Broadcast RGB: Full=0A= supported: Full Limited 16:2=0A= audio: auto=0A= supported: off auto on =0A= DP3 disconnected (normal left inverted right x axis y axis)=0A= Identifier: 0x47=0A= Timestamp: 135826=0A= Subpixel: unknown=0A= Clones: =0A= CRTCs: 0 1=0A= Transform: 1.000000 0.000000 0.000000=0A= 0.000000 1.000000 0.000000=0A= 0.000000 0.000000 1.000000=0A= filter: =0A= Broadcast RGB: Full=0A= supported: Full Limited 16:2=0A= audio: auto=0A= supported: off auto on =0A= ------=_NextPart_000_00BA_01CCEA87.EE573940 Content-Type: application/octet-stream; name="xorg.conf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="xorg.conf" Section "ServerFlags" EndSection Section "Serverlayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Option "Xinerama" "false" EndSection Section "Device" Identifier "Device0" Driver "intel" VendorName "INTEL Corporation" Screen 0 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "HDMI2" DefaultDepth 24 Option "TwinView" "off" SubSection "Display" Depth 24 Modes "1920x1080@50i" # Modes "1920x1080@50p" "1920x1080@59.94p" "1920x1080@24p" = "1920x1080@60p" EndSubSection EndSection Section "Monitor" Identifier "HDMI2" HorizSync 26.0 - 76.0 VertRefresh 23.0 - 61.0 Modeline "1920x1080@50i" 74.25 1920 2448 2492 2640 1080 1084 = 1094 1124 interlace +hsync +vsync #Modeline "1920x1080@50i" 74.25 1920 2008 2052 2200 1080 1084 = 1094 1125 interlace +hsync +vsync #Modeline "1920x1080@24p" 74.230 1920 2560 2604 2752 1080 1084 = 1089 1125 +hsync +vsync #Modeline "1920x1080@50p" 148.500 1920 2448 2492 2640 1080 1084 = 1089 1125 +hsync +vsync #Modeline "1920x1080@59.94p" 148.352 1920 1960 2016 2200 1080 1082 = 1088 1125 +hsync +vsync #Modeline "1920x1080@60p" 148.500 1920 2008 2056 2200 1080 1084 = 1089 1125 +hsync +vsync EndSection Section "Extensions" # fixes tearing Option "Composite" "Disable" EndSection ------=_NextPart_000_00BA_01CCEA87.EE573940 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ------=_NextPart_000_00BA_01CCEA87.EE573940-- From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rodrigo Vivi Subject: Re: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 16:54:06 -0200 Message-ID: References: <009301ccea71$c6d58db0$5480a910$@freenet.de> <00b901ccea7f$8c920df0$a5b629d0$@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mail-iy0-f177.google.com (mail-iy0-f177.google.com [209.85.210.177]) by gabe.freedesktop.org (Postfix) with ESMTP id 3E2FE9E8FE for ; Mon, 13 Feb 2012 10:54:08 -0800 (PST) Received: by iafj26 with SMTP id j26so5580710iaf.36 for ; Mon, 13 Feb 2012 10:54:07 -0800 (PST) In-Reply-To: <00b901ccea7f$8c920df0$a5b629d0$@freenet.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: Atechsystem Cc: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org The git repo is right, but are you sure you are using the remotes/origin/interlaced branch? It is strange that you couldn't see any interlace mode without using the handmade modeline. On Mon, Feb 13, 2012 at 4:44 PM, Atechsystem wrote: > > > -----Urspr=FCngliche Nachricht----- > Von: Atechsystem [mailto:Atechsystem@freenet.de] > Gesendet: Montag, 13. Februar 2012 19:44 > An: 'Paulo Zanoni' > Betreff: AW: [Intel-gfx] Interlaced mode on intel Clarkdale only colored > stripes > > Hi, > > thanks for your quick reply. > >>Paulo Zanoni [mailto:przanoni@gmail.com] Which git repo and which >>branch exactly? You may have a repo without the patches that fix interlac= ed > modes. > > I compiled it from here: git://people.freedesktop.org/~danvet/drm > >>Which line did you add to xorg.conf? What exactly did you do in this >>step? Please try to remove every xorg configuration file and test again >>with the default configuration > > I added for example: > Modeline =A0 =A0"1920x1080@50i" =A0 =A0 74.25 1920 2448 2492 2640 1080 10= 84 1094 > 1124 interlace +hsync +vsync > > Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, 30Hz, > 25Hz and 24Hz. > >>Please attach the TV, then run "xrandr --verbose" and send us the output. > Please also send the output of intel_reg_dumper: >>http://intellinuxgraphics.org/intel_reg_dumper.html > > Please find files attached. > > -----Urspr=FCngliche Nachricht----- > Von: Paulo Zanoni [mailto:przanoni@gmail.com] > Gesendet: Montag, 13. Februar 2012 18:58 > An: Atechsystem > Cc: daniel@ffwll.ch; intel-gfx@lists.freedesktop.org > Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored > stripes > > Hi > > 2012/2/13 Atechsystem : >> I compiled the kernel from your git repro to test interlaced output >> with my Clarkdale (H55) Chipset. > > Which git repo and which branch exactly? You may have a repo without the > patches that fix interlaced modes. > >> After installing and reboot I put the interlaced line to my xorg.conf >> and activate them (first by xorg.conf and after that by lxdm >> resolution set tool). > > Which line did you add to xorg.conf? What exactly did you do in this step? > Please try to remove every xorg configuration file and test again with the > default configuration > >> >> I only get a screen full of colored stripes after switching from >> progressive to interlaced mode. =A0My=A0 TV shows 1080i as input mode. >> After that I read all mode lines from my TV by using the xorg server >> log and tried every interlaced modeline I found but always the same >> striped screen. To get sure that I use correct modelines I checked >> them with an plugged in card from another brand and it works immediately. > > Please attach the TV, then run "xrandr --verbose" and send us the output. > Please also send the output of intel_reg_dumper: > http://intellinuxgraphics.org/intel_reg_dumper.html > > -- > Paulo Zanoni > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx > -- = Rodrigo Vivi Blog: http://blog.vivi.eng.br GPG: 0x905BE242 @ wwwkeys.pgp.net From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paulo Zanoni Subject: Re: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 16:55:31 -0200 Message-ID: References: <009301ccea71$c6d58db0$5480a910$@freenet.de> <00af01ccea7f$62da4680$288ed380$@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mail-we0-f177.google.com (mail-we0-f177.google.com [74.125.82.177]) by gabe.freedesktop.org (Postfix) with ESMTP id CCDA49E8FE for ; Mon, 13 Feb 2012 10:55:32 -0800 (PST) Received: by wera10 with SMTP id a10so4353855wer.36 for ; Mon, 13 Feb 2012 10:55:32 -0800 (PST) In-Reply-To: <00af01ccea7f$62da4680$288ed380$@freenet.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: Atechsystem Cc: Intel Graphics Development List-Id: intel-gfx@lists.freedesktop.org 2012/2/13 Atechsystem : > I compiled it from here: git://people.freedesktop.org/~danvet/drm Did you change to the "interlaced" branch? Maybe the best tree to test is this: http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-queued (repository is drm-intel and branch is drm-intel-next-queued). > I added for example: > Modeline =A0 =A0"1920x1080@50i" =A0 =A0 74.25 1920 2448 2492 2640 1080 10= 84 1094 > 1124 interlace +hsync +vsync > > Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, 30Hz, > 25Hz and 24Hz. This should not be needed. If you have the correct branch, you don't need any configuration tweak: just boot the machine, plug a monitor that supports interlaced modes, and "xrandr --verbose" will show you some interlaced modes. Please confirm that you are using the correct branch first. Use "git log" or "git branch" commands to check. -- = Paulo Zanoni From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Atechsystem" Subject: Re: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 20:05:14 +0100 Message-ID: <000c01ccea82$6be35390$43a9fab0$@freenet.de> References: <009301ccea71$c6d58db0$5480a910$@freenet.de> <00af01ccea7f$62da4680$288ed380$@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mout0.freenet.de (mout0.freenet.de [195.4.92.90]) by gabe.freedesktop.org (Postfix) with ESMTP id BC9FE9E730 for ; Mon, 13 Feb 2012 11:08:04 -0800 (PST) In-Reply-To: Content-Language: de List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: 'Paulo Zanoni' Cc: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org > Von: Paulo Zanoni [mailto:przanoni@gmail.com] >Maybe the best tree to test is this: >http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-queu= ed I will compile it now. Before I used the drm-intel-next branch. I downloaded the latest tar.gz file and didn't use git to checkout the branch. >Rodrigo Vivi [mailto:rodrigo.vivi@gmail.com] >The git repo is right, but are you sure you are using the remotes/origin/interlaced branch? >It is strange that you couldn't see any interlace mode without using the handmade modeline. = No chance to select it directly. I 've no clue to select it by standard lxde dialog. -----Urspr=FCngliche Nachricht----- Von: Paulo Zanoni [mailto:przanoni@gmail.com] = Gesendet: Montag, 13. Februar 2012 19:56 An: Atechsystem Cc: Intel Graphics Development Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored stripes 2012/2/13 Atechsystem : > I compiled it from here: git://people.freedesktop.org/~danvet/drm Did you change to the "interlaced" branch? Maybe the best tree to test is this: http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-queued (repository is drm-intel and branch is drm-intel-next-queued). > I added for example: > Modeline =A0 =A0"1920x1080@50i" =A0 =A0 74.25 1920 2448 2492 2640 1080 10= 84 = > 1094 > 1124 interlace +hsync +vsync > > Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, = > 30Hz, 25Hz and 24Hz. This should not be needed. If you have the correct branch, you don't need any configuration tweak: just boot the machine, plug a monitor that supports interlaced modes, and "xrandr --verbose" will show you some interlaced modes. Please confirm that you are using the correct branch first. Use "git log" or "git branch" commands to check. -- Paulo Zanoni From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Atechsystem" Subject: WG: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 21:44:16 +0100 Message-ID: <000c01ccea90$415d8560$c4189020$@freenet.de> References: <009301ccea71$c6d58db0$5480a910$@freenet.de> <00af01ccea7f$62da4680$288ed380$@freenet.de> <000c01ccea82$6be35390$43a9fab0$@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mout4.freenet.de (mout4.freenet.de [195.4.92.94]) by gabe.freedesktop.org (Postfix) with ESMTP id E0C6D9E74D for ; Mon, 13 Feb 2012 12:47:10 -0800 (PST) In-Reply-To: <000c01ccea82$6be35390$43a9fab0$@freenet.de> Content-Language: de List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org Hello, > Von: Paulo Zanoni [mailto:przanoni@gmail.com] Maybe the best tree to = >test is this: >http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-queu= ed Thanks, compiling from this repro solved my problem. With my TV I have to use the xorg modeline, without it I can't select the interlaced modes. If I use my NEC monitor I can select the I modeline by using the lxde monitor setting tool. I think my TV don't report the I modelines. Thanks for this patch Regards Atech -----Urspr=FCngliche Nachricht----- Von: intel-gfx-bounces+atechsystem=3Dfreenet.de@lists.freedesktop.org [mailto:intel-gfx-bounces+atechsystem=3Dfreenet.de@lists.freedesktop.org] Im Auftrag von Atechsystem Gesendet: Montag, 13. Februar 2012 20:05 An: 'Paulo Zanoni' Cc: intel-gfx@lists.freedesktop.org Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored stripes > Von: Paulo Zanoni [mailto:przanoni@gmail.com] Maybe the best tree to = >test is this: >http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-que >ued I will compile it now. Before I used the drm-intel-next branch. I downloaded the latest tar.gz file and didn't use git to checkout the branch. >Rodrigo Vivi [mailto:rodrigo.vivi@gmail.com] The git repo is right, but = >are you sure you are using the remotes/origin/interlaced branch? >It is strange that you couldn't see any interlace mode without using = >the handmade modeline. = No chance to select it directly. I 've no clue to select it by standard lxde dialog. -----Urspr=FCngliche Nachricht----- Von: Paulo Zanoni [mailto:przanoni@gmail.com] Gesendet: Montag, 13. Februar 2012 19:56 An: Atechsystem Cc: Intel Graphics Development Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored stripes 2012/2/13 Atechsystem : > I compiled it from here: git://people.freedesktop.org/~danvet/drm Did you change to the "interlaced" branch? Maybe the best tree to test is this: http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-queued (repository is drm-intel and branch is drm-intel-next-queued). > I added for example: > Modeline =A0 =A0"1920x1080@50i" =A0 =A0 74.25 1920 2448 2492 2640 1080 10= 84 > 1094 > 1124 interlace +hsync +vsync > > Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, = > 30Hz, 25Hz and 24Hz. This should not be needed. If you have the correct branch, you don't need any configuration tweak: just boot the machine, plug a monitor that supports interlaced modes, and "xrandr --verbose" will show you some interlaced modes. Please confirm that you are using the correct branch first. Use "git log" or "git branch" commands to check. -- Paulo Zanoni _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rodrigo Vivi Subject: Re: WG: Interlaced mode on intel Clarkdale only colored stripes Date: Mon, 13 Feb 2012 20:28:34 -0200 Message-ID: References: <009301ccea71$c6d58db0$5480a910$@freenet.de> <00af01ccea7f$62da4680$288ed380$@freenet.de> <000c01ccea82$6be35390$43a9fab0$@freenet.de> <000c01ccea90$415d8560$c4189020$@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mail-iy0-f177.google.com (mail-iy0-f177.google.com [209.85.210.177]) by gabe.freedesktop.org (Postfix) with ESMTP id C53F69E917 for ; Mon, 13 Feb 2012 14:28:34 -0800 (PST) Received: by iafj26 with SMTP id j26so5901024iaf.36 for ; Mon, 13 Feb 2012 14:28:34 -0800 (PST) In-Reply-To: <000c01ccea90$415d8560$c4189020$@freenet.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: Atechsystem Cc: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org I'm glad that it is working for you now! Yes, the drm-intel-next-queued has all the interlaced patches that were in remotes/origin/interlaced. I don't think your tv doesn't report the interlaced modes, but the modes it reports are the CEA modes we aren't supporting yet. It is on my todo list take a carefully look at this modes. Cheers, Rodrigo. On Mon, Feb 13, 2012 at 6:44 PM, Atechsystem wrote: > > Hello, > >> Von: Paulo Zanoni [mailto:przanoni@gmail.com] Maybe the best tree to >>test is this: >>http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-que= ued > > Thanks, compiling from this repro solved my problem. With my TV I have to > use the xorg modeline, without it I can't select the interlaced modes. If= I > use my NEC monitor I can select the I modeline by using the lxde monitor > setting tool. I think my TV don't report the I modelines. > > Thanks for this patch > > Regards > Atech > > -----Urspr=FCngliche Nachricht----- > Von: intel-gfx-bounces+atechsystem=3Dfreenet.de@lists.freedesktop.org > [mailto:intel-gfx-bounces+atechsystem=3Dfreenet.de@lists.freedesktop.org]= Im > Auftrag von Atechsystem > Gesendet: Montag, 13. Februar 2012 20:05 > An: 'Paulo Zanoni' > Cc: intel-gfx@lists.freedesktop.org > Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored > stripes > >> Von: Paulo Zanoni [mailto:przanoni@gmail.com] Maybe the best tree to >>test is this: >>http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-que >>ued > > I will compile it now. Before I used the drm-intel-next branch. I downloa= ded > the latest tar.gz file and didn't use git to checkout the branch. > >>Rodrigo Vivi [mailto:rodrigo.vivi@gmail.com] The git repo is right, but >>are you sure you are using the > remotes/origin/interlaced branch? >>It is strange that you couldn't see any interlace mode without using >>the > handmade modeline. > > No chance to select it directly. I 've no clue to select it by standard l= xde > dialog. > > -----Urspr=FCngliche Nachricht----- > Von: Paulo Zanoni [mailto:przanoni@gmail.com] > Gesendet: Montag, 13. Februar 2012 19:56 > An: Atechsystem > Cc: Intel Graphics Development > Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored > stripes > > 2012/2/13 Atechsystem : >> I compiled it from here: git://people.freedesktop.org/~danvet/drm > > Did you change to the "interlaced" branch? > > Maybe the best tree to test is this: > http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=3Ddrm-intel-next-que= ued > > (repository is drm-intel and branch is drm-intel-next-queued). > >> I added for example: >> Modeline =A0 =A0"1920x1080@50i" =A0 =A0 74.25 1920 2448 2492 2640 1080 1= 084 >> 1094 >> 1124 interlace +hsync +vsync >> >> Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, >> 30Hz, 25Hz and 24Hz. > > This should not be needed. If you have the correct branch, you don't need > any configuration tweak: just boot the machine, plug a monitor that suppo= rts > interlaced modes, and "xrandr --verbose" will show you some interlaced > modes. > > Please confirm that you are using the correct branch first. Use "git log"= or > "git branch" commands to check. > > > -- > Paulo Zanoni > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- = Rodrigo Vivi Blog: http://blog.vivi.eng.br GPG: 0x905BE242 @ wwwkeys.pgp.net