Marcel,

I just reproduced it here. Attached is an aclsession script which will do
it. First run aclsession on one machine, then run rctest on the other
machine. Also attached are the console output and hcidump from the machine
running rctest.

The pattern of send 5 packets, wait 20 seconds, send 5 more, etc appears to
continue forever. I'm told that it should just keep sending data.

-Daryl.

> -----Original Message-----
> From: bluez-devel-admin@lists.sourceforge.net 
> [mailto:bluez-devel-admin@lists.sourceforge.net] On Behalf Of 
> Daryl Van Vorst
> Sent: July 11, 2003 9:44 AM
> To: 'Marcel Holtmann'
> Cc: 'BlueZ Mailing List'
> Subject: [Bluez-devel] RE: Qualification testing - rfcomm
> 
> 
> Marcel,
> 
> You're right that it doesn't check the error code, it just 
> exits. But that doesn't explain why it sends 5 frames, waits 
> for 20 seconds, and then sends 5 more.  Shouldn't send block?
> 
> I haven't yet tried to reproduce that behaviour.  So I'm not 
> certain that the sequence of send 5, wait 20, send 5 repeats 
> indefinitely.  I'll take a look at it shortly.
> 
> Thanks for the flow control patch...  I'll wait and see if 
> anything comes out of the above stuff before sending it out 
> for testing.
> 
> -Daryl.
> 
> > -----Original Message-----
> > From: Marcel Holtmann [mailto:marcel@rvs.uni-bielefeld.de]
> > Sent: July 11, 2003 1:55 AM
> > To: Daryl Van Vorst
> > Cc: BlueZ Mailing List
> > Subject: Re: Qualification testing - rfcomm
> > 
> > 
> > Hi Daryl,
> > 
> > > Finally got some results on those latest rfcomm changes for
> > > qualification. Looks like there are a few more problems. :( 
> >  But we're
> > > close. :)
> > > 
> > > TP/RFC/BV-09-C:
> > > "Verify that the IUT handles flow control correctly when
> > the Tester,
> > > acting as a device conforming to Bluetooth version 1.0B,
> > controls the
> > > data flow using the Modem Status Command. The IUT's device
> > role is of
> > > no importance."
> > > 
> > > The command and console output:
> > > 
> > > root@jack-00000000:~>./rctest -s -P 1 -b 20 00:A0:96:1F:83:71
> > > rctest[351]: Connected
> > > rctest[351]: Sending ...
> > > rctest[351]: Send failed. Resource temporarily unavailable(11)
> > > 
> > > The IUT sends data in 5 frames, then stops for aboue 20s,
> > then sends 5
> > > more, then stops, etc. Technically, this test passed 
> because we did
> > > stop sending data after the tester send MSC stop to the IUT. But 
> > > something's clearly not right.
> > 
> > this looks quite right, but the rctest program don't check
> > the error code. If it receives EAGAIN it should try again, 
> > but it aborts.
> > 
> > Regards
> > 
> > Marcel
> > 
> > 
> > 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email sponsored by: Parasoft
> Error proof Web apps, automate testing & more.
> Download & eval WebKing and get a free book. 
> www.parasoft.com/bulletproofapps1 
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net 
> https://lists.sourceforge.net/lists/listinfo/b> luez-devel
>