Re: [PATCH] drm/i915/display: Fixed a screen flickering when turning on display from off

[Dolan Liu <liuyong5@huaqin.corp-partner.google.com>]

this case have been there so many years, it's time to fix it if 
possible. And user-space software may improved by themselves in we 
didn't realize place.

even if not,  for the proof user-space setting  0, it's better to change to


    if (level < min || level == 0 )

         level =max;


Intel default FSP will set the default min is 2% (6/255). if someone 
missed the setting, it will be keep the default and level.min will be 
larger than 0.

if someone changed the default min in VBT or coreboot, the user-space 
lowest level set as 0, still can go though to this logic.


whatever, we think this one should correct back, otherwise it will keep 
occurring in each new kernel release on all Intel device, this is not 
very friendly to all developers.

and the only fix way is  hack patch to remove "level=max".


On 3/15/24 19:02, Ville Syrjälä wrote:
> On Wed, Mar 06, 2024 at 12:19:42PM +0200, Jani Nikula wrote:
>> On Wed, 06 Mar 2024, gareth.yu@intel.com wrote:
>>> From: Gareth Yu <gareth.yu@intel.com>
>>>
>>> Turn on the panel from zero brightness of the last state, the panel was set
>>> a maximum PWM in the flow. Once the panel initialization is completed, the
>>> backlight is restored to zero brightness. There is a flckering generated.
>> Please be more precise in describing what exactly happens and
>> when. Driver probe? Modeset? What restores backlight to zero brightness?
>>
>> Better yet, please file a bug at fdo gitlab, attach full dmesg with
>> debugs, etc.
>>
>> Before we had the concept of minimum brightness, the minimum was always
>> 0. And the check was:
>>
>> 	if (level == 0)
>> 		level = max;
>>
>> Historically, the point was, if you're enabling the display and
>> backlight, you don't want it to be at 0 brightness, because for most
>> displays that means a black screen.
> I think that hack was originally added becaue some silly
> userspace thingy was setting the backlight level to 0 on
> suspend/etc. and then forgetting to restore it back to a
> sane value afterwards. Dunno if that nonsense behaviour
> still persists to this day.
>