[PATCH v2 0/6] MT8186 SMI SUPPORT

[PATCH v2 0/6] MT8186 SMI SUPPORT

[Yong Wu]

This patchset adds mt8186 smi support, mainly adds a sleep control function.

Change note:
v2: a) Add two patches for the "make dtbs_check" warning.
    b) Seperate the "sleep control" into two functions.
       And add a "TODO" comment while sleep control fails.

v1: https://lore.kernel.org/linux-mediatek/20211203064027.14993-1-yong.wu@mediatek.com/
    Base on v5.16-rc1.

Yong Wu (6):
  dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning
  dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs
    warning
  dt-bindings: memory: mediatek: Add mt8186 support
  memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable
  memory: mtk-smi: Add sleep ctrl function
  memory: mtk-smi: mt8186: Add smi support

 .../mediatek,smi-common.yaml                  |  4 +-
 .../memory-controllers/mediatek,smi-larb.yaml | 10 ++--
 drivers/memory/mtk-smi.c                      | 50 ++++++++++++++++++-
 3 files changed, 57 insertions(+), 7 deletions(-)

-- 
2.18.0

[PATCH v2 0/6] MT8186 SMI SUPPORT

[Yong Wu]

This patchset adds mt8186 smi support, mainly adds a sleep control function.

Change note:
v2: a) Add two patches for the "make dtbs_check" warning.
    b) Seperate the "sleep control" into two functions.
       And add a "TODO" comment while sleep control fails.

v1: https://lore.kernel.org/linux-mediatek/20211203064027.14993-1-yong.wu@mediatek.com/
    Base on v5.16-rc1.

Yong Wu (6):
  dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning
  dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs
    warning
  dt-bindings: memory: mediatek: Add mt8186 support
  memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable
  memory: mtk-smi: Add sleep ctrl function
  memory: mtk-smi: mt8186: Add smi support

 .../mediatek,smi-common.yaml                  |  4 +-
 .../memory-controllers/mediatek,smi-larb.yaml | 10 ++--
 drivers/memory/mtk-smi.c                      | 50 ++++++++++++++++++-
 3 files changed, 57 insertions(+), 7 deletions(-)

-- 
2.18.0


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 0/6] MT8186 SMI SUPPORT

[Yong Wu]

This patchset adds mt8186 smi support, mainly adds a sleep control function.

Change note:
v2: a) Add two patches for the "make dtbs_check" warning.
    b) Seperate the "sleep control" into two functions.
       And add a "TODO" comment while sleep control fails.

v1: https://lore.kernel.org/linux-mediatek/20211203064027.14993-1-yong.wu@mediatek.com/
    Base on v5.16-rc1.

Yong Wu (6):
  dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning
  dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs
    warning
  dt-bindings: memory: mediatek: Add mt8186 support
  memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable
  memory: mtk-smi: Add sleep ctrl function
  memory: mtk-smi: mt8186: Add smi support

 .../mediatek,smi-common.yaml                  |  4 +-
 .../memory-controllers/mediatek,smi-larb.yaml | 10 ++--
 drivers/memory/mtk-smi.c                      | 50 ++++++++++++++++++-
 3 files changed, 57 insertions(+), 7 deletions(-)

-- 
2.18.0



_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 0/6] MT8186 SMI SUPPORT

[Yong Wu]

This patchset adds mt8186 smi support, mainly adds a sleep control function.

Change note:
v2: a) Add two patches for the "make dtbs_check" warning.
    b) Seperate the "sleep control" into two functions.
       And add a "TODO" comment while sleep control fails.

v1: https://lore.kernel.org/linux-mediatek/20211203064027.14993-1-yong.wu@mediatek.com/
    Base on v5.16-rc1.

Yong Wu (6):
  dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning
  dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs
    warning
  dt-bindings: memory: mediatek: Add mt8186 support
  memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable
  memory: mtk-smi: Add sleep ctrl function
  memory: mtk-smi: mt8186: Add smi support

 .../mediatek,smi-common.yaml                  |  4 +-
 .../memory-controllers/mediatek,smi-larb.yaml | 10 ++--
 drivers/memory/mtk-smi.c                      | 50 ++++++++++++++++++-
 3 files changed, 57 insertions(+), 7 deletions(-)

-- 
2.18.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14016000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@15001000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@16010000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index eaeff1ada7f8..80907e357892 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -108,7 +108,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0

[PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14016000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@15001000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@16010000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index eaeff1ada7f8..80907e357892 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -108,7 +108,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14016000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@15001000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@16010000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index eaeff1ada7f8..80907e357892 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -108,7 +108,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14016000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@15001000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@16010000: 'mediatek,larb-id' is a required property
	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index eaeff1ada7f8..80907e357892 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -108,7 +108,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14017000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
	...

larb@16010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

larb@17010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

If a platform's larb supports gals, there will be some larbs have one
more "gals" clock while the others still only need "apb"/"smi" clocks,
then the minItems for clock and clock-names are 2.

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 80907e357892..884c0c74e5e4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -80,10 +80,10 @@ allOf:
     then:
       properties:
         clock:
-          items:
-            minItems: 3
-            maxItems: 3
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
-- 
2.18.0

[PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14017000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
	...

larb@16010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

larb@17010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

If a platform's larb supports gals, there will be some larbs have one
more "gals" clock while the others still only need "apb"/"smi" clocks,
then the minItems for clock and clock-names are 2.

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 80907e357892..884c0c74e5e4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -80,10 +80,10 @@ allOf:
     then:
       properties:
         clock:
-          items:
-            minItems: 3
-            maxItems: 3
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14017000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
	...

larb@16010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

larb@17010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

If a platform's larb supports gals, there will be some larbs have one
more "gals" clock while the others still only need "apb"/"smi" clocks,
then the minItems for clock and clock-names are 2.

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 80907e357892..884c0c74e5e4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -80,10 +80,10 @@ allOf:
     then:
       properties:
         clock:
-          items:
-            minItems: 3
-            maxItems: 3
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

Mute the warning from "make dtbs_check":

larb@14017000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
	...

larb@16010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

larb@17010000: clock-names: ['apb', 'smi'] is too short
	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml

If a platform's larb supports gals, there will be some larbs have one
more "gals" clock while the others still only need "apb"/"smi" clocks,
then the minItems for clock and clock-names are 2.

Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 80907e357892..884c0c74e5e4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -80,10 +80,10 @@ allOf:
     then:
       properties:
         clock:
-          items:
-            minItems: 3
-            maxItems: 3
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/6] dt-bindings: memory: mediatek: Add mt8186 support

[Yong Wu]

Add mt8186 smi support in the bindings.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml      | 4 +++-
 .../bindings/memory-controllers/mediatek,smi-larb.yaml        | 3 +++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 3a82b0b27fa0..fbe5077408d8 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -35,6 +35,7 @@ properties:
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
@@ -127,6 +128,7 @@ allOf:
           enum:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
             - mediatek,mt8192-smi-common
             - mediatek,mt8195-smi-common-vdo
             - mediatek,mt8195-smi-common-vpp
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 884c0c74e5e4..7da157cb1db6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -23,6 +23,7 @@ properties:
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
           - mediatek,mt8192-smi-larb
           - mediatek,mt8195-smi-larb
 
@@ -75,6 +76,7 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
             - mediatek,mt8195-smi-larb
 
     then:
@@ -108,6 +110,7 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
+              - mediatek,mt8186-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0

[PATCH v2 3/6] dt-bindings: memory: mediatek: Add mt8186 support

[Yong Wu]

Add mt8186 smi support in the bindings.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml      | 4 +++-
 .../bindings/memory-controllers/mediatek,smi-larb.yaml        | 3 +++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 3a82b0b27fa0..fbe5077408d8 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -35,6 +35,7 @@ properties:
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
@@ -127,6 +128,7 @@ allOf:
           enum:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
             - mediatek,mt8192-smi-common
             - mediatek,mt8195-smi-common-vdo
             - mediatek,mt8195-smi-common-vpp
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 884c0c74e5e4..7da157cb1db6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -23,6 +23,7 @@ properties:
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
           - mediatek,mt8192-smi-larb
           - mediatek,mt8195-smi-larb
 
@@ -75,6 +76,7 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
             - mediatek,mt8195-smi-larb
 
     then:
@@ -108,6 +110,7 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
+              - mediatek,mt8186-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 3/6] dt-bindings: memory: mediatek: Add mt8186 support

[Yong Wu]

Add mt8186 smi support in the bindings.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml      | 4 +++-
 .../bindings/memory-controllers/mediatek,smi-larb.yaml        | 3 +++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 3a82b0b27fa0..fbe5077408d8 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -35,6 +35,7 @@ properties:
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
@@ -127,6 +128,7 @@ allOf:
           enum:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
             - mediatek,mt8192-smi-common
             - mediatek,mt8195-smi-common-vdo
             - mediatek,mt8195-smi-common-vpp
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 884c0c74e5e4..7da157cb1db6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -23,6 +23,7 @@ properties:
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
           - mediatek,mt8192-smi-larb
           - mediatek,mt8195-smi-larb
 
@@ -75,6 +76,7 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
             - mediatek,mt8195-smi-larb
 
     then:
@@ -108,6 +110,7 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
+              - mediatek,mt8186-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 3/6] dt-bindings: memory: mediatek: Add mt8186 support

[Yong Wu]

Add mt8186 smi support in the bindings.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml      | 4 +++-
 .../bindings/memory-controllers/mediatek,smi-larb.yaml        | 3 +++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 3a82b0b27fa0..fbe5077408d8 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -35,6 +35,7 @@ properties:
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
@@ -127,6 +128,7 @@ allOf:
           enum:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
             - mediatek,mt8192-smi-common
             - mediatek,mt8195-smi-common-vdo
             - mediatek,mt8195-smi-common-vpp
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 884c0c74e5e4..7da157cb1db6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -23,6 +23,7 @@ properties:
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
           - mediatek,mt8192-smi-larb
           - mediatek,mt8195-smi-larb
 
@@ -75,6 +76,7 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
             - mediatek,mt8195-smi-larb
 
     then:
@@ -108,6 +110,7 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
+              - mediatek,mt8186-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

The successful return value for clk_bulk_prepare_enable is 0, rather than
"< 0". Fix this.

Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index b883dcc0bbfa..e7b1a22b12ea 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	int ret;
 
 	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Configure the basic setting for this larb */
-- 
2.18.0

[PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

The successful return value for clk_bulk_prepare_enable is 0, rather than
"< 0". Fix this.

Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index b883dcc0bbfa..e7b1a22b12ea 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	int ret;
 
 	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Configure the basic setting for this larb */
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

The successful return value for clk_bulk_prepare_enable is 0, rather than
"< 0". Fix this.

Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index b883dcc0bbfa..e7b1a22b12ea 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	int ret;
 
 	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Configure the basic setting for this larb */
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

The successful return value for clk_bulk_prepare_enable is 0, rather than
"< 0". Fix this.

Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index b883dcc0bbfa..e7b1a22b12ea 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	int ret;
 
 	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Configure the basic setting for this larb */
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

Sleep control means that when the larb goes to sleep, we should wait a bit
until all the current commands are finished. Thus, when the larb runtime
suspends, we need to enable this function to wait until all the existed
commands are finished. When the larb resumes, just disable this function.
This function only improves the safety of bus. Add a new flag for this
function. Prepare for mt8186.

Signed-off-by: Anan Sun <anan.sun@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index e7b1a22b12ea..d8552f4caba4 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -32,6 +33,10 @@
 #define SMI_DUMMY			0x444
 
 /* SMI LARB */
+#define SMI_LARB_SLP_CON                0xc
+#define SLP_PROT_EN                     BIT(0)
+#define SLP_PROT_RDY                    BIT(16)
+
 #define SMI_LARB_CMD_THRT_CON		0x24
 #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
 #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
@@ -81,6 +86,7 @@
 
 #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
 #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
+#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
 #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
 
 struct mtk_smi_reg_pair {
@@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{}
 };
 
+static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
+{
+	int ret;
+	u32 tmp;
+
+	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
+	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
+					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
+	if (ret) {
+		/* TODO: Reset this larb if it fails here. */
+		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+	}
+	return ret;
+}
+
+static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
+{
+	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
+}
+
 static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
 {
 	struct platform_device *smi_com_pdev;
@@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		mtk_smi_larb_sleep_ctrl_disable(larb);
+
 	/* Configure the basic setting for this larb */
 	larb_gen->config_port(dev);
 
@@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
 
 	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
-	return 0;
+	return ret;
 }
 
 static const struct dev_pm_ops smi_larb_pm_ops = {
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

Sleep control means that when the larb goes to sleep, we should wait a bit
until all the current commands are finished. Thus, when the larb runtime
suspends, we need to enable this function to wait until all the existed
commands are finished. When the larb resumes, just disable this function.
This function only improves the safety of bus. Add a new flag for this
function. Prepare for mt8186.

Signed-off-by: Anan Sun <anan.sun@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index e7b1a22b12ea..d8552f4caba4 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -32,6 +33,10 @@
 #define SMI_DUMMY			0x444
 
 /* SMI LARB */
+#define SMI_LARB_SLP_CON                0xc
+#define SLP_PROT_EN                     BIT(0)
+#define SLP_PROT_RDY                    BIT(16)
+
 #define SMI_LARB_CMD_THRT_CON		0x24
 #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
 #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
@@ -81,6 +86,7 @@
 
 #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
 #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
+#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
 #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
 
 struct mtk_smi_reg_pair {
@@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{}
 };
 
+static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
+{
+	int ret;
+	u32 tmp;
+
+	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
+	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
+					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
+	if (ret) {
+		/* TODO: Reset this larb if it fails here. */
+		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+	}
+	return ret;
+}
+
+static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
+{
+	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
+}
+
 static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
 {
 	struct platform_device *smi_com_pdev;
@@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		mtk_smi_larb_sleep_ctrl_disable(larb);
+
 	/* Configure the basic setting for this larb */
 	larb_gen->config_port(dev);
 
@@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
 
 	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
-	return 0;
+	return ret;
 }
 
 static const struct dev_pm_ops smi_larb_pm_ops = {
-- 
2.18.0

[PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

Sleep control means that when the larb goes to sleep, we should wait a bit
until all the current commands are finished. Thus, when the larb runtime
suspends, we need to enable this function to wait until all the existed
commands are finished. When the larb resumes, just disable this function.
This function only improves the safety of bus. Add a new flag for this
function. Prepare for mt8186.

Signed-off-by: Anan Sun <anan.sun@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index e7b1a22b12ea..d8552f4caba4 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -32,6 +33,10 @@
 #define SMI_DUMMY			0x444
 
 /* SMI LARB */
+#define SMI_LARB_SLP_CON                0xc
+#define SLP_PROT_EN                     BIT(0)
+#define SLP_PROT_RDY                    BIT(16)
+
 #define SMI_LARB_CMD_THRT_CON		0x24
 #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
 #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
@@ -81,6 +86,7 @@
 
 #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
 #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
+#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
 #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
 
 struct mtk_smi_reg_pair {
@@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{}
 };
 
+static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
+{
+	int ret;
+	u32 tmp;
+
+	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
+	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
+					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
+	if (ret) {
+		/* TODO: Reset this larb if it fails here. */
+		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+	}
+	return ret;
+}
+
+static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
+{
+	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
+}
+
 static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
 {
 	struct platform_device *smi_com_pdev;
@@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		mtk_smi_larb_sleep_ctrl_disable(larb);
+
 	/* Configure the basic setting for this larb */
 	larb_gen->config_port(dev);
 
@@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
 
 	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
-	return 0;
+	return ret;
 }
 
 static const struct dev_pm_ops smi_larb_pm_ops = {
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

Sleep control means that when the larb goes to sleep, we should wait a bit
until all the current commands are finished. Thus, when the larb runtime
suspends, we need to enable this function to wait until all the existed
commands are finished. When the larb resumes, just disable this function.
This function only improves the safety of bus. Add a new flag for this
function. Prepare for mt8186.

Signed-off-by: Anan Sun <anan.sun@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index e7b1a22b12ea..d8552f4caba4 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -32,6 +33,10 @@
 #define SMI_DUMMY			0x444
 
 /* SMI LARB */
+#define SMI_LARB_SLP_CON                0xc
+#define SLP_PROT_EN                     BIT(0)
+#define SLP_PROT_RDY                    BIT(16)
+
 #define SMI_LARB_CMD_THRT_CON		0x24
 #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
 #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
@@ -81,6 +86,7 @@
 
 #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
 #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
+#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
 #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
 
 struct mtk_smi_reg_pair {
@@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{}
 };
 
+static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
+{
+	int ret;
+	u32 tmp;
+
+	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
+	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
+					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
+	if (ret) {
+		/* TODO: Reset this larb if it fails here. */
+		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+	}
+	return ret;
+}
+
+static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
+{
+	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
+}
+
 static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
 {
 	struct platform_device *smi_com_pdev;
@@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		mtk_smi_larb_sleep_ctrl_disable(larb);
+
 	/* Configure the basic setting for this larb */
 	larb_gen->config_port(dev);
 
@@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
 
 	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
-	return 0;
+	return ret;
 }
 
 static const struct dev_pm_ops smi_larb_pm_ops = {
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 6/6] memory: mtk-smi: mt8186: Add smi support

[Yong Wu]

Add mt8186 SMI support.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/memory/mtk-smi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index d8552f4caba4..424a16de516e 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -355,6 +355,11 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
 				      /* IPU0 | IPU1 | CCU */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_SLEEP_CTL,
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 };
@@ -372,6 +377,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
 	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
 	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
+	{.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186},
 	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
 	{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
 	{}
@@ -577,6 +583,12 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 		    F_MMU1_LARB(7),
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7),
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 	.type     = MTK_SMI_GEN2,
 	.has_gals = true,
@@ -611,6 +623,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
+	{.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
 	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
 	{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
 	{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
-- 
2.18.0

[PATCH v2 6/6] memory: mtk-smi: mt8186: Add smi support

[Yong Wu]

Add mt8186 SMI support.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/memory/mtk-smi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index d8552f4caba4..424a16de516e 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -355,6 +355,11 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
 				      /* IPU0 | IPU1 | CCU */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_SLEEP_CTL,
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 };
@@ -372,6 +377,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
 	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
 	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
+	{.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186},
 	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
 	{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
 	{}
@@ -577,6 +583,12 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 		    F_MMU1_LARB(7),
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7),
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 	.type     = MTK_SMI_GEN2,
 	.has_gals = true,
@@ -611,6 +623,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
+	{.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
 	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
 	{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
 	{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 6/6] memory: mtk-smi: mt8186: Add smi support

[Yong Wu]

Add mt8186 SMI support.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/memory/mtk-smi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index d8552f4caba4..424a16de516e 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -355,6 +355,11 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
 				      /* IPU0 | IPU1 | CCU */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_SLEEP_CTL,
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 };
@@ -372,6 +377,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
 	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
 	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
+	{.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186},
 	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
 	{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
 	{}
@@ -577,6 +583,12 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 		    F_MMU1_LARB(7),
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7),
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 	.type     = MTK_SMI_GEN2,
 	.has_gals = true,
@@ -611,6 +623,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
+	{.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
 	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
 	{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
 	{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 6/6] memory: mtk-smi: mt8186: Add smi support

[Yong Wu]

Add mt8186 SMI support.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/memory/mtk-smi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index d8552f4caba4..424a16de516e 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -355,6 +355,11 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
 				      /* IPU0 | IPU1 | CCU */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_SLEEP_CTL,
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 };
@@ -372,6 +377,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
 	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
 	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
+	{.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186},
 	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
 	{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
 	{}
@@ -577,6 +583,12 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 		    F_MMU1_LARB(7),
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7),
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 	.type     = MTK_SMI_GEN2,
 	.has_gals = true,
@@ -611,6 +623,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
+	{.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
 	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
 	{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
 	{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.
> 

Hello! Thanks for this commit!
However, there are a few comments...

This description is a bit confusing, please reword it, something like...

"Function clk_bulk_prepare_enable() returns 0 for success or a negative
number for error. Fix this code style issue."

In any case, you're not fixing any bad logic issue here, as the function
will never return anything > 0.

What you're fixing is a common pattern usage issue, so the Fixes tag can be
removed since it's not really useful to schedule this commit for backport
over older stable versions.


After the requested changes:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>   drivers/memory/mtk-smi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>   	int ret;
>   
>   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>   		return ret;
>   
>   	/* Configure the basic setting for this larb */
> 

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.
> 

Hello! Thanks for this commit!
However, there are a few comments...

This description is a bit confusing, please reword it, something like...

"Function clk_bulk_prepare_enable() returns 0 for success or a negative
number for error. Fix this code style issue."

In any case, you're not fixing any bad logic issue here, as the function
will never return anything > 0.

What you're fixing is a common pattern usage issue, so the Fixes tag can be
removed since it's not really useful to schedule this commit for backport
over older stable versions.


After the requested changes:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>   drivers/memory/mtk-smi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>   	int ret;
>   
>   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>   		return ret;
>   
>   	/* Configure the basic setting for this larb */
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.
> 

Hello! Thanks for this commit!
However, there are a few comments...

This description is a bit confusing, please reword it, something like...

"Function clk_bulk_prepare_enable() returns 0 for success or a negative
number for error. Fix this code style issue."

In any case, you're not fixing any bad logic issue here, as the function
will never return anything > 0.

What you're fixing is a common pattern usage issue, so the Fixes tag can be
removed since it's not really useful to schedule this commit for backport
over older stable versions.


After the requested changes:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>   drivers/memory/mtk-smi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>   	int ret;
>   
>   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>   		return ret;
>   
>   	/* Configure the basic setting for this larb */
> 


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.
> 

Hello! Thanks for this commit!
However, there are a few comments...

This description is a bit confusing, please reword it, something like...

"Function clk_bulk_prepare_enable() returns 0 for success or a negative
number for error. Fix this code style issue."

In any case, you're not fixing any bad logic issue here, as the function
will never return anything > 0.

What you're fixing is a common pattern usage issue, so the Fixes tag can be
removed since it's not really useful to schedule this commit for backport
over older stable versions.


After the requested changes:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>   drivers/memory/mtk-smi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>   	int ret;
>   
>   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>   		return ret;
>   
>   	/* Configure the basic setting for this larb */
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[AngeloGioacchino Del Regno]

Il 11/01/22 07:39, Yong Wu ha scritto:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Krzysztof Kozlowski]

On 11/01/2022 07:38, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14016000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@15001000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@16010000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Please explain why larb-id is not necessary on mediatek,mt8167-smi-larb.
IOW, what logical error was there (except the dtschema pointed out issue).

> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
>  1 file changed, 1 deletion(-)
> 


Best regards,
Krzysztof

Re: [PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Krzysztof Kozlowski]

On 11/01/2022 07:38, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14016000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@15001000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@16010000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Please explain why larb-id is not necessary on mediatek,mt8167-smi-larb.
IOW, what logical error was there (except the dtschema pointed out issue).

> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
>  1 file changed, 1 deletion(-)
> 


Best regards,
Krzysztof
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Krzysztof Kozlowski]

On 11/01/2022 07:38, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14016000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@15001000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@16010000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Please explain why larb-id is not necessary on mediatek,mt8167-smi-larb.
IOW, what logical error was there (except the dtschema pointed out issue).

> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
>  1 file changed, 1 deletion(-)
> 


Best regards,
Krzysztof

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 1/6] dt-bindings: memory: mtk-smi: Fix larb-id dtbs_check warning

[Krzysztof Kozlowski]

On 11/01/2022 07:38, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14016000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@15001000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
> larb@16010000: 'mediatek,larb-id' is a required property
> 	arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml

Please explain why larb-id is not necessary on mediatek,mt8167-smi-larb.
IOW, what logical error was there (except the dtschema pointed out issue).

> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml           | 1 -
>  1 file changed, 1 deletion(-)
> 


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14017000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 	...
> 
> larb@16010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> larb@17010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> If a platform's larb supports gals, there will be some larbs have one
> more "gals" clock while the others still only need "apb"/"smi" clocks,
> then the minItems for clock and clock-names are 2.
> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> index 80907e357892..884c0c74e5e4 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -80,10 +80,10 @@ allOf:
>      then:
>        properties:
>          clock:

Separate patch:
This should be clocks. The same in second if. Now it is simply not
working...

> -          items:

Putting min/maxItems under items is wrong. The second if also needs the
fixing. Please make it a separate patch before this one.

The schema was clearly not tested before...


> -            minItems: 3
> -            maxItems: 3
> +          minItems: 2
> +          maxItems: 3
>          clock-names:
> +          minItems: 2
>            items:
>              - const: apb
>              - const: smi
> 


Best regards,
Krzysztof

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14017000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 	...
> 
> larb@16010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> larb@17010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> If a platform's larb supports gals, there will be some larbs have one
> more "gals" clock while the others still only need "apb"/"smi" clocks,
> then the minItems for clock and clock-names are 2.
> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> index 80907e357892..884c0c74e5e4 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -80,10 +80,10 @@ allOf:
>      then:
>        properties:
>          clock:

Separate patch:
This should be clocks. The same in second if. Now it is simply not
working...

> -          items:

Putting min/maxItems under items is wrong. The second if also needs the
fixing. Please make it a separate patch before this one.

The schema was clearly not tested before...


> -            minItems: 3
> -            maxItems: 3
> +          minItems: 2
> +          maxItems: 3
>          clock-names:
> +          minItems: 2
>            items:
>              - const: apb
>              - const: smi
> 


Best regards,
Krzysztof
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14017000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 	...
> 
> larb@16010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> larb@17010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> If a platform's larb supports gals, there will be some larbs have one
> more "gals" clock while the others still only need "apb"/"smi" clocks,
> then the minItems for clock and clock-names are 2.
> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> index 80907e357892..884c0c74e5e4 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -80,10 +80,10 @@ allOf:
>      then:
>        properties:
>          clock:

Separate patch:
This should be clocks. The same in second if. Now it is simply not
working...

> -          items:

Putting min/maxItems under items is wrong. The second if also needs the
fixing. Please make it a separate patch before this one.

The schema was clearly not tested before...


> -            minItems: 3
> -            maxItems: 3
> +          minItems: 2
> +          maxItems: 3
>          clock-names:
> +          minItems: 2
>            items:
>              - const: apb
>              - const: smi
> 


Best regards,
Krzysztof

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Mute the warning from "make dtbs_check":
> 
> larb@14017000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 	...
> 
> larb@16010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> larb@17010000: clock-names: ['apb', 'smi'] is too short
> 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
> 
> If a platform's larb supports gals, there will be some larbs have one
> more "gals" clock while the others still only need "apb"/"smi" clocks,
> then the minItems for clock and clock-names are 2.
> 
> Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> index 80907e357892..884c0c74e5e4 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -80,10 +80,10 @@ allOf:
>      then:
>        properties:
>          clock:

Separate patch:
This should be clocks. The same in second if. Now it is simply not
working...

> -          items:

Putting min/maxItems under items is wrong. The second if also needs the
fixing. Please make it a separate patch before this one.

The schema was clearly not tested before...


> -            minItems: 3
> -            maxItems: 3
> +          minItems: 2
> +          maxItems: 3
>          clock-names:
> +          minItems: 2
>            items:
>              - const: apb
>              - const: smi
> 


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.

I do not understand. The commit description does not match the code.
What is the error here?

> 
> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")

There is no bug to fix...

> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	int ret;
>  
>  	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>  		return ret;
>  
>  	/* Configure the basic setting for this larb */
> 


Best regards,
Krzysztof

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.

I do not understand. The commit description does not match the code.
What is the error here?

> 
> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")

There is no bug to fix...

> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	int ret;
>  
>  	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>  		return ret;
>  
>  	/* Configure the basic setting for this larb */
> 


Best regards,
Krzysztof
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.

I do not understand. The commit description does not match the code.
What is the error here?

> 
> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")

There is no bug to fix...

> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	int ret;
>  
>  	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>  		return ret;
>  
>  	/* Configure the basic setting for this larb */
> 


Best regards,
Krzysztof

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> The successful return value for clk_bulk_prepare_enable is 0, rather than
> "< 0". Fix this.

I do not understand. The commit description does not match the code.
What is the error here?

> 
> Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")

There is no bug to fix...

> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index b883dcc0bbfa..e7b1a22b12ea 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -480,7 +480,7 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	int ret;
>  
>  	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
> -	if (ret < 0)
> +	if (ret)
>  		return ret;
>  
>  	/* Configure the basic setting for this larb */
> 


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index e7b1a22b12ea..d8552f4caba4 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -8,6 +8,7 @@
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/io.h>
> +#include <linux/iopoll.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> @@ -32,6 +33,10 @@
>  #define SMI_DUMMY			0x444
>  
>  /* SMI LARB */
> +#define SMI_LARB_SLP_CON                0xc
> +#define SLP_PROT_EN                     BIT(0)
> +#define SLP_PROT_RDY                    BIT(16)
> +
>  #define SMI_LARB_CMD_THRT_CON		0x24
>  #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
>  #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
> @@ -81,6 +86,7 @@
>  
>  #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
>  #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
> +#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
>  #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
>  
>  struct mtk_smi_reg_pair {
> @@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
>  	{}
>  };
>  
> +static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
> +{
> +	int ret;
> +	u32 tmp;
> +
> +	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
> +	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
> +					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
> +	if (ret) {
> +		/* TODO: Reset this larb if it fails here. */
> +		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
> +	}
> +	return ret;
> +}
> +
> +static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
> +{
> +	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
> +}
> +
>  static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
>  {
>  	struct platform_device *smi_com_pdev;
> @@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		mtk_smi_larb_sleep_ctrl_disable(larb);
> +
>  	/* Configure the basic setting for this larb */
>  	larb_gen->config_port(dev);
>  
> @@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
>  
>  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> -	return 0;
> +	return ret;

I am wondering whether disabling clocks in error case is a proper step.
On suspend error, the PM core won't run any further callbacks on this
device. This means, it won't be resumed and your clocks stay disabled. I
think you should return early and leave the device in active state in
case of error.


Best regards,
Krzysztof

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index e7b1a22b12ea..d8552f4caba4 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -8,6 +8,7 @@
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/io.h>
> +#include <linux/iopoll.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> @@ -32,6 +33,10 @@
>  #define SMI_DUMMY			0x444
>  
>  /* SMI LARB */
> +#define SMI_LARB_SLP_CON                0xc
> +#define SLP_PROT_EN                     BIT(0)
> +#define SLP_PROT_RDY                    BIT(16)
> +
>  #define SMI_LARB_CMD_THRT_CON		0x24
>  #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
>  #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
> @@ -81,6 +86,7 @@
>  
>  #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
>  #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
> +#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
>  #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
>  
>  struct mtk_smi_reg_pair {
> @@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
>  	{}
>  };
>  
> +static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
> +{
> +	int ret;
> +	u32 tmp;
> +
> +	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
> +	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
> +					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
> +	if (ret) {
> +		/* TODO: Reset this larb if it fails here. */
> +		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
> +	}
> +	return ret;
> +}
> +
> +static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
> +{
> +	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
> +}
> +
>  static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
>  {
>  	struct platform_device *smi_com_pdev;
> @@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		mtk_smi_larb_sleep_ctrl_disable(larb);
> +
>  	/* Configure the basic setting for this larb */
>  	larb_gen->config_port(dev);
>  
> @@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
>  
>  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> -	return 0;
> +	return ret;

I am wondering whether disabling clocks in error case is a proper step.
On suspend error, the PM core won't run any further callbacks on this
device. This means, it won't be resumed and your clocks stay disabled. I
think you should return early and leave the device in active state in
case of error.


Best regards,
Krzysztof
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index e7b1a22b12ea..d8552f4caba4 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -8,6 +8,7 @@
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/io.h>
> +#include <linux/iopoll.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> @@ -32,6 +33,10 @@
>  #define SMI_DUMMY			0x444
>  
>  /* SMI LARB */
> +#define SMI_LARB_SLP_CON                0xc
> +#define SLP_PROT_EN                     BIT(0)
> +#define SLP_PROT_RDY                    BIT(16)
> +
>  #define SMI_LARB_CMD_THRT_CON		0x24
>  #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
>  #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
> @@ -81,6 +86,7 @@
>  
>  #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
>  #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
> +#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
>  #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
>  
>  struct mtk_smi_reg_pair {
> @@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
>  	{}
>  };
>  
> +static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
> +{
> +	int ret;
> +	u32 tmp;
> +
> +	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
> +	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
> +					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
> +	if (ret) {
> +		/* TODO: Reset this larb if it fails here. */
> +		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
> +	}
> +	return ret;
> +}
> +
> +static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
> +{
> +	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
> +}
> +
>  static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
>  {
>  	struct platform_device *smi_com_pdev;
> @@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		mtk_smi_larb_sleep_ctrl_disable(larb);
> +
>  	/* Configure the basic setting for this larb */
>  	larb_gen->config_port(dev);
>  
> @@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
>  
>  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> -	return 0;
> +	return ret;

I am wondering whether disabling clocks in error case is a proper step.
On suspend error, the PM core won't run any further callbacks on this
device. This means, it won't be resumed and your clocks stay disabled. I
think you should return early and leave the device in active state in
case of error.


Best regards,
Krzysztof

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Krzysztof Kozlowski]

On 11/01/2022 07:39, Yong Wu wrote:
> Sleep control means that when the larb goes to sleep, we should wait a bit
> until all the current commands are finished. Thus, when the larb runtime
> suspends, we need to enable this function to wait until all the existed
> commands are finished. When the larb resumes, just disable this function.
> This function only improves the safety of bus. Add a new flag for this
> function. Prepare for mt8186.
> 
> Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index e7b1a22b12ea..d8552f4caba4 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -8,6 +8,7 @@
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/io.h>
> +#include <linux/iopoll.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> @@ -32,6 +33,10 @@
>  #define SMI_DUMMY			0x444
>  
>  /* SMI LARB */
> +#define SMI_LARB_SLP_CON                0xc
> +#define SLP_PROT_EN                     BIT(0)
> +#define SLP_PROT_RDY                    BIT(16)
> +
>  #define SMI_LARB_CMD_THRT_CON		0x24
>  #define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
>  #define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
> @@ -81,6 +86,7 @@
>  
>  #define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
>  #define MTK_SMI_FLAG_SW_FLAG		BIT(1)
> +#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
>  #define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
>  
>  struct mtk_smi_reg_pair {
> @@ -371,6 +377,26 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
>  	{}
>  };
>  
> +static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
> +{
> +	int ret;
> +	u32 tmp;
> +
> +	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
> +	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
> +					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
> +	if (ret) {
> +		/* TODO: Reset this larb if it fails here. */
> +		dev_warn(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
> +	}
> +	return ret;
> +}
> +
> +static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
> +{
> +	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
> +}
> +
>  static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
>  {
>  	struct platform_device *smi_com_pdev;
> @@ -483,6 +509,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		mtk_smi_larb_sleep_ctrl_disable(larb);
> +
>  	/* Configure the basic setting for this larb */
>  	larb_gen->config_port(dev);
>  
> @@ -492,9 +521,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
>  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
> +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
>  
>  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> -	return 0;
> +	return ret;

I am wondering whether disabling clocks in error case is a proper step.
On suspend error, the PM core won't run any further callbacks on this
device. This means, it won't be resumed and your clocks stay disabled. I
think you should return early and leave the device in active state in
case of error.


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

On Wed, 2022-01-12 at 11:27 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Sleep control means that when the larb goes to sleep, we should
> > wait a bit
> > until all the current commands are finished. Thus, when the larb
> > runtime
> > suspends, we need to enable this function to wait until all the
> > existed
> > commands are finished. When the larb resumes, just disable this
> > function.
> > This function only improves the safety of bus. Add a new flag for
> > this
> > function. Prepare for mt8186.
> > 
> > Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
> >  1 file changed, 34 insertions(+), 1 deletion(-)

[...]

> > @@ -492,9 +521,13 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
> >  {
> >  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> > +	int ret = 0;
> > +
> > +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general,
> > MTK_SMI_FLAG_SLEEP_CTL))
> > +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
> >  
> >  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> > -	return 0;
> > +	return ret;
> 
> I am wondering whether disabling clocks in error case is a proper
> step.
> On suspend error, the PM core won't run any further callbacks on this
> device. This means, it won't be resumed and your clocks stay
> disabled. I
> think you should return early and leave the device in active state in
> case of error.

oh, Yes. Thanks for pointing this out.

I will fix this in next version.

> 
> 
> Best regards,
> Krzysztof
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

On Wed, 2022-01-12 at 11:27 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Sleep control means that when the larb goes to sleep, we should
> > wait a bit
> > until all the current commands are finished. Thus, when the larb
> > runtime
> > suspends, we need to enable this function to wait until all the
> > existed
> > commands are finished. When the larb resumes, just disable this
> > function.
> > This function only improves the safety of bus. Add a new flag for
> > this
> > function. Prepare for mt8186.
> > 
> > Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
> >  1 file changed, 34 insertions(+), 1 deletion(-)

[...]

> > @@ -492,9 +521,13 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
> >  {
> >  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> > +	int ret = 0;
> > +
> > +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general,
> > MTK_SMI_FLAG_SLEEP_CTL))
> > +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
> >  
> >  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> > -	return 0;
> > +	return ret;
> 
> I am wondering whether disabling clocks in error case is a proper
> step.
> On suspend error, the PM core won't run any further callbacks on this
> device. This means, it won't be resumed and your clocks stay
> disabled. I
> think you should return early and leave the device in active state in
> case of error.

oh, Yes. Thanks for pointing this out.

I will fix this in next version.

> 
> 
> Best regards,
> Krzysztof
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

On Wed, 2022-01-12 at 11:27 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Sleep control means that when the larb goes to sleep, we should
> > wait a bit
> > until all the current commands are finished. Thus, when the larb
> > runtime
> > suspends, we need to enable this function to wait until all the
> > existed
> > commands are finished. When the larb resumes, just disable this
> > function.
> > This function only improves the safety of bus. Add a new flag for
> > this
> > function. Prepare for mt8186.
> > 
> > Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
> >  1 file changed, 34 insertions(+), 1 deletion(-)

[...]

> > @@ -492,9 +521,13 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
> >  {
> >  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> > +	int ret = 0;
> > +
> > +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general,
> > MTK_SMI_FLAG_SLEEP_CTL))
> > +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
> >  
> >  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> > -	return 0;
> > +	return ret;
> 
> I am wondering whether disabling clocks in error case is a proper
> step.
> On suspend error, the PM core won't run any further callbacks on this
> device. This means, it won't be resumed and your clocks stay
> disabled. I
> think you should return early and leave the device in active state in
> case of error.

oh, Yes. Thanks for pointing this out.

I will fix this in next version.

> 
> 
> Best regards,
> Krzysztof
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 5/6] memory: mtk-smi: Add sleep ctrl function

[Yong Wu]

On Wed, 2022-01-12 at 11:27 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Sleep control means that when the larb goes to sleep, we should
> > wait a bit
> > until all the current commands are finished. Thus, when the larb
> > runtime
> > suspends, we need to enable this function to wait until all the
> > existed
> > commands are finished. When the larb resumes, just disable this
> > function.
> > This function only improves the safety of bus. Add a new flag for
> > this
> > function. Prepare for mt8186.
> > 
> > Signed-off-by: Anan Sun <anan.sun@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  drivers/memory/mtk-smi.c | 35 ++++++++++++++++++++++++++++++++++-
> >  1 file changed, 34 insertions(+), 1 deletion(-)

[...]

> > @@ -492,9 +521,13 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
> >  {
> >  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> > +	int ret = 0;
> > +
> > +	if (MTK_SMI_CAPS(larb->larb_gen->flags_general,
> > MTK_SMI_FLAG_SLEEP_CTL))
> > +		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
> >  
> >  	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
> > -	return 0;
> > +	return ret;
> 
> I am wondering whether disabling clocks in error case is a proper
> step.
> On suspend error, the PM core won't run any further callbacks on this
> device. This means, it won't be resumed and your clocks stay
> disabled. I
> think you should return early and leave the device in active state in
> case of error.

oh, Yes. Thanks for pointing this out.

I will fix this in next version.

> 
> 
> Best regards,
> Krzysztof
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

On Tue, 2022-01-11 at 10:10 +0100, AngeloGioacchino Del Regno wrote:
> Il 11/01/22 07:39, Yong Wu ha scritto:
> > The successful return value for clk_bulk_prepare_enable is 0,
> > rather than
> > "< 0". Fix this.
> > 
> 
> Hello! Thanks for this commit!
> However, there are a few comments...
> 
> This description is a bit confusing, please reword it, something
> like...
> 
> "Function clk_bulk_prepare_enable() returns 0 for success or a
> negative
> number for error. Fix this code style issue."

Thanks for your quickly reviewing.

I will use this in next version and remove the "Fixes" tag.

> 
> In any case, you're not fixing any bad logic issue here, as the
> function
> will never return anything > 0.
> 
> What you're fixing is a common pattern usage issue, so the Fixes tag
> can be
> removed since it's not really useful to schedule this commit for
> backport
> over older stable versions.
> 
> 
> After the requested changes:
> 
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> 
> > Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >   drivers/memory/mtk-smi.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> > index b883dcc0bbfa..e7b1a22b12ea 100644
> > --- a/drivers/memory/mtk-smi.c
> > +++ b/drivers/memory/mtk-smi.c
> > @@ -480,7 +480,7 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >   	int ret;
> >   
> >   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb-
> > >smi.clks);
> > -	if (ret < 0)
> > +	if (ret)
> >   		return ret;
> >   
> >   	/* Configure the basic setting for this larb */
> > 
> 
> 

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

On Tue, 2022-01-11 at 10:10 +0100, AngeloGioacchino Del Regno wrote:
> Il 11/01/22 07:39, Yong Wu ha scritto:
> > The successful return value for clk_bulk_prepare_enable is 0,
> > rather than
> > "< 0". Fix this.
> > 
> 
> Hello! Thanks for this commit!
> However, there are a few comments...
> 
> This description is a bit confusing, please reword it, something
> like...
> 
> "Function clk_bulk_prepare_enable() returns 0 for success or a
> negative
> number for error. Fix this code style issue."

Thanks for your quickly reviewing.

I will use this in next version and remove the "Fixes" tag.

> 
> In any case, you're not fixing any bad logic issue here, as the
> function
> will never return anything > 0.
> 
> What you're fixing is a common pattern usage issue, so the Fixes tag
> can be
> removed since it's not really useful to schedule this commit for
> backport
> over older stable versions.
> 
> 
> After the requested changes:
> 
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> 
> > Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >   drivers/memory/mtk-smi.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> > index b883dcc0bbfa..e7b1a22b12ea 100644
> > --- a/drivers/memory/mtk-smi.c
> > +++ b/drivers/memory/mtk-smi.c
> > @@ -480,7 +480,7 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >   	int ret;
> >   
> >   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb-
> > >smi.clks);
> > -	if (ret < 0)
> > +	if (ret)
> >   		return ret;
> >   
> >   	/* Configure the basic setting for this larb */
> > 
> 
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

On Tue, 2022-01-11 at 10:10 +0100, AngeloGioacchino Del Regno wrote:
> Il 11/01/22 07:39, Yong Wu ha scritto:
> > The successful return value for clk_bulk_prepare_enable is 0,
> > rather than
> > "< 0". Fix this.
> > 
> 
> Hello! Thanks for this commit!
> However, there are a few comments...
> 
> This description is a bit confusing, please reword it, something
> like...
> 
> "Function clk_bulk_prepare_enable() returns 0 for success or a
> negative
> number for error. Fix this code style issue."

Thanks for your quickly reviewing.

I will use this in next version and remove the "Fixes" tag.

> 
> In any case, you're not fixing any bad logic issue here, as the
> function
> will never return anything > 0.
> 
> What you're fixing is a common pattern usage issue, so the Fixes tag
> can be
> removed since it's not really useful to schedule this commit for
> backport
> over older stable versions.
> 
> 
> After the requested changes:
> 
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> 
> > Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >   drivers/memory/mtk-smi.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> > index b883dcc0bbfa..e7b1a22b12ea 100644
> > --- a/drivers/memory/mtk-smi.c
> > +++ b/drivers/memory/mtk-smi.c
> > @@ -480,7 +480,7 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >   	int ret;
> >   
> >   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb-
> > >smi.clks);
> > -	if (ret < 0)
> > +	if (ret)
> >   		return ret;
> >   
> >   	/* Configure the basic setting for this larb */
> > 
> 
> 
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 4/6] memory: mtk-smi: Fix the return value for clk_bulk_prepare_enable

[Yong Wu]

On Tue, 2022-01-11 at 10:10 +0100, AngeloGioacchino Del Regno wrote:
> Il 11/01/22 07:39, Yong Wu ha scritto:
> > The successful return value for clk_bulk_prepare_enable is 0,
> > rather than
> > "< 0". Fix this.
> > 
> 
> Hello! Thanks for this commit!
> However, there are a few comments...
> 
> This description is a bit confusing, please reword it, something
> like...
> 
> "Function clk_bulk_prepare_enable() returns 0 for success or a
> negative
> number for error. Fix this code style issue."

Thanks for your quickly reviewing.

I will use this in next version and remove the "Fixes" tag.

> 
> In any case, you're not fixing any bad logic issue here, as the
> function
> will never return anything > 0.
> 
> What you're fixing is a common pattern usage issue, so the Fixes tag
> can be
> removed since it's not really useful to schedule this commit for
> backport
> over older stable versions.
> 
> 
> After the requested changes:
> 
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> 
> > Fixes: 0e14917c57f9 ("memory: mtk-smi: Use clk_bulk clock ops")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >   drivers/memory/mtk-smi.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> > index b883dcc0bbfa..e7b1a22b12ea 100644
> > --- a/drivers/memory/mtk-smi.c
> > +++ b/drivers/memory/mtk-smi.c
> > @@ -480,7 +480,7 @@ static int __maybe_unused
> > mtk_smi_larb_resume(struct device *dev)
> >   	int ret;
> >   
> >   	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb-
> > >smi.clks);
> > -	if (ret < 0)
> > +	if (ret)
> >   		return ret;
> >   
> >   	/* Configure the basic setting for this larb */
> > 
> 
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

On Wed, 2022-01-12 at 11:18 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Mute the warning from "make dtbs_check":
> > 
> > larb@14017000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 	...
> > 
> > larb@16010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > larb@17010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > If a platform's larb supports gals, there will be some larbs have
> > one
> > more "gals" clock while the others still only need "apb"/"smi"
> > clocks,
> > then the minItems for clock and clock-names are 2.
> > 
> > Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to
> > DT schema")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6
> > +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > index 80907e357892..884c0c74e5e4 100644
> > --- a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > +++ b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > @@ -80,10 +80,10 @@ allOf:
> >      then:
> >        properties:
> >          clock:
> 
> Separate patch:
> This should be clocks. The same in second if. Now it is simply not
> working...
> 
> > -          items:
> 
> Putting min/maxItems under items is wrong. The second if also needs
> the
> fixing. Please make it a separate patch before this one.

Oh. I will use a new patch for renaming "clock" to "clocks" and
removing the "items".

Thanks.

> 
> The schema was clearly not tested before...
> 
> 
> > -            minItems: 3
> > -            maxItems: 3
> > +          minItems: 2
> > +          maxItems: 3
> >          clock-names:
> > +          minItems: 2
> >            items:
> >              - const: apb
> >              - const: smi
> > 
> 
> 
> Best regards,
> Krzysztof

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

On Wed, 2022-01-12 at 11:18 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Mute the warning from "make dtbs_check":
> > 
> > larb@14017000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 	...
> > 
> > larb@16010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > larb@17010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > If a platform's larb supports gals, there will be some larbs have
> > one
> > more "gals" clock while the others still only need "apb"/"smi"
> > clocks,
> > then the minItems for clock and clock-names are 2.
> > 
> > Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to
> > DT schema")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6
> > +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > index 80907e357892..884c0c74e5e4 100644
> > --- a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > +++ b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > @@ -80,10 +80,10 @@ allOf:
> >      then:
> >        properties:
> >          clock:
> 
> Separate patch:
> This should be clocks. The same in second if. Now it is simply not
> working...
> 
> > -          items:
> 
> Putting min/maxItems under items is wrong. The second if also needs
> the
> fixing. Please make it a separate patch before this one.

Oh. I will use a new patch for renaming "clock" to "clocks" and
removing the "items".

Thanks.

> 
> The schema was clearly not tested before...
> 
> 
> > -            minItems: 3
> > -            maxItems: 3
> > +          minItems: 2
> > +          maxItems: 3
> >          clock-names:
> > +          minItems: 2
> >            items:
> >              - const: apb
> >              - const: smi
> > 
> 
> 
> Best regards,
> Krzysztof

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

On Wed, 2022-01-12 at 11:18 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Mute the warning from "make dtbs_check":
> > 
> > larb@14017000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 	...
> > 
> > larb@16010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > larb@17010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > If a platform's larb supports gals, there will be some larbs have
> > one
> > more "gals" clock while the others still only need "apb"/"smi"
> > clocks,
> > then the minItems for clock and clock-names are 2.
> > 
> > Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to
> > DT schema")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6
> > +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > index 80907e357892..884c0c74e5e4 100644
> > --- a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > +++ b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > @@ -80,10 +80,10 @@ allOf:
> >      then:
> >        properties:
> >          clock:
> 
> Separate patch:
> This should be clocks. The same in second if. Now it is simply not
> working...
> 
> > -          items:
> 
> Putting min/maxItems under items is wrong. The second if also needs
> the
> fixing. Please make it a separate patch before this one.

Oh. I will use a new patch for renaming "clock" to "clocks" and
removing the "items".

Thanks.

> 
> The schema was clearly not tested before...
> 
> 
> > -            minItems: 3
> > -            maxItems: 3
> > +          minItems: 2
> > +          maxItems: 3
> >          clock-names:
> > +          minItems: 2
> >            items:
> >              - const: apb
> >              - const: smi
> > 
> 
> 
> Best regards,
> Krzysztof
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 2/6] dt-bindings: memory: mtk-smi: Fix the larb clock/clock-names dtbs warning

[Yong Wu]

On Wed, 2022-01-12 at 11:18 +0100, Krzysztof Kozlowski wrote:
> On 11/01/2022 07:39, Yong Wu wrote:
> > Mute the warning from "make dtbs_check":
> > 
> > larb@14017000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 	...
> > 
> > larb@16010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > larb@17010000: clock-names: ['apb', 'smi'] is too short
> > 	arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > 	arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > 
> > If a platform's larb supports gals, there will be some larbs have
> > one
> > more "gals" clock while the others still only need "apb"/"smi"
> > clocks,
> > then the minItems for clock and clock-names are 2.
> > 
> > Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to
> > DT schema")
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6
> > +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > index 80907e357892..884c0c74e5e4 100644
> > --- a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > +++ b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,smi-larb.yaml
> > @@ -80,10 +80,10 @@ allOf:
> >      then:
> >        properties:
> >          clock:
> 
> Separate patch:
> This should be clocks. The same in second if. Now it is simply not
> working...
> 
> > -          items:
> 
> Putting min/maxItems under items is wrong. The second if also needs
> the
> fixing. Please make it a separate patch before this one.

Oh. I will use a new patch for renaming "clock" to "clocks" and
removing the "items".

Thanks.

> 
> The schema was clearly not tested before...
> 
> 
> > -            minItems: 3
> > -            maxItems: 3
> > +          minItems: 2
> > +          maxItems: 3
> >          clock-names:
> > +          minItems: 2
> >            items:
> >              - const: apb
> >              - const: smi
> > 
> 
> 
> Best regards,
> Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel