From mboxrd@z Thu Jan  1 00:00:00 1970
From: michael at siptele.com <michael@siptele.com>
Date: Tue, 29 Aug 2017 11:47:38 +0300
Subject: [U-Boot] usb-otg mode
Message-ID: <023801d320a3$79c10f90$6d432eb0$@com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


Hello u-booters!

I have bought a TV box (with Android). I want to install Linux on this box.
Inserting sd card with Linux image did nothing.

As I did not want to break the box, I spend several days compiling u-boot
with usbtty to get some insight to the TV box.
Starting the TV box with my compiled spl.bin "sunxi-fel uboot
u-boot-sunxi-with-spl.bin" did not show me any usbtty on my host device and
I couldn't see a thing.

Then, I discovered that I can open the TV box without breaking it. I welded
USB UART to the console pins and bingo! I get console messages and can
intercut with the u-boot console.

Apparently, booting the box with "sunxi-fel uboot u-boot-sunxi-with-spl.bin"
Starts the box in normal usb mode. (not otg). So, the usb detach from the
host machine
And the console over usbtty does not reach it.

Can we program the u-boot to start the USB in usb-otg mode?

Thank you,

Michael