From mboxrd@z Thu Jan  1 00:00:00 1970
From: Patrick DELAUNAY <patrick.delaunay@st.com>
Date: Thu, 14 May 2020 09:43:04 +0000
Subject: [PATCH] ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2
In-Reply-To: <20200430155234.1.If8f63efaa47eb0830ce241e3a62b2aa420e0883a@changeid>
References: <20200430155234.1.If8f63efaa47eb0830ce241e3a62b2aa420e0883a@changeid>
Message-ID: <025b63a592fd47d5a7e79d57f831fd0f@SFHDAG6NODE3.st.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

> From: Patrick DELAUNAY <patrick.delaunay@st.com>
> Sent: jeudi 30 avril 2020 15:53
> To: u-boot at lists.denx.de
> Cc: Patrick DELAUNAY <patrick.delaunay@st.com>; Marek Vasut
> <marex@denx.de>; Tom Rini <trini@konsulko.com>; U-Boot STM32 <uboot-
> stm32 at st-md-mailman.stormreply.com>
> Subject: [PATCH] ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2
> Importance: High
> 
> DT alignment with Linux 5.7-rc2, including the kernel commits
> 
> 431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1
> ED1/EV1 boards
> 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on
> STM32MP1 boards
> 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on
> STM32MP1 boards
> 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15
> boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on
> stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency
> property on stm32mp15x
> b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of
> stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on
> stm32mp157c-ed1
> bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1
> b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx
> a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK
> boards
> 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-
> ed1
> fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1
> board
> cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on
> stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on
> stm32mp157c-ev1
> 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15
> 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151
> 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-
> avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A
> pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A
> pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B
> pinmux entry on stm32mp1
> ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on
> stm32mp1
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
> ---
> Hi,
> 
> Dependency with correction of GPIO support in SPL:
> 
> [v2,09/12] gpio: stm32: support gpio ops in SPL
> http://patchwork.ozlabs.org/project/uboot/patch/20200422142834.v2.9.I355ddbc80
> 4eba6047ea147d830be57a5b9c4a87e at changeid/
> 
> Patrick
> 
> 
>  arch/arm/dts/stm32mp15-pinctrl.dtsi | 92 +++++++++++++++++++++++++++++
>  arch/arm/dts/stm32mp151.dtsi        | 13 +++-
>  arch/arm/dts/stm32mp153.dtsi        |  1 +
>  arch/arm/dts/stm32mp157c-ed1.dts    | 12 ++--
>  arch/arm/dts/stm32mp157c-ev1.dts    | 13 ++--
>  arch/arm/dts/stm32mp15xx-dhcom.dtsi |  3 +-  arch/arm/dts/stm32mp15xx-
> dhcor.dtsi |  8 ---
>  arch/arm/dts/stm32mp15xx-dkx.dtsi   | 10 ++--
>  8 files changed, 126 insertions(+), 26 deletions(-)
> 

Applied to u-boot-stm/master, thanks!

Regards

Patrick