From mboxrd@z Thu Jan 1 00:00:00 1970 From: Helmut Klein Subject: Re: meson-gx-mmc: 2nd patch set Date: Wed, 22 Mar 2017 11:09:17 +0100 Message-ID: <0442ae99-de48-2410-eccb-0b1f44afa249@gmail.com> References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> <82061526-2d16-5710-89a6-afbeecbf0c57@gmail.com> <54049145-cd6a-8e14-6011-e1e33f687cf5@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mail-wr0-f193.google.com ([209.85.128.193]:35488 "EHLO mail-wr0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759029AbdCVKJ1 (ORCPT ); Wed, 22 Mar 2017 06:09:27 -0400 Received: by mail-wr0-f193.google.com with SMTP id u108so26022255wrb.2 for ; Wed, 22 Mar 2017 03:09:25 -0700 (PDT) In-Reply-To: <54049145-cd6a-8e14-6011-e1e33f687cf5@gmail.com> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Heiner Kallweit Cc: "linux-mmc@vger.kernel.org" , linux-amlogic@lists.infradead.org On 20.03.2017 20:54, Heiner Kallweit wrote: > Am 20.03.2017 um 14:01 schrieb Helmut Klein: >> On 20.03.2017 13:51, Helmut Klein wrote: >>> On 19.03.2017 23:39, Heiner Kallweit wrote: >>>> Am 19.03.2017 um 21:46 schrieb Helmut Klein: >>>>> On 19.03.2017 16:35, Heiner Kallweit wrote: >>>>>> Am 19.03.2017 um 12:23 schrieb Helmut Klein: >>>>>>> On 18.03.2017 11:24, Heiner Kallweit wrote: >>>>>>>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>>>>>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>>>>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>>>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>>>>>>> Hallo Heiner, >>>>>>>>>>>>> >>>>>>>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of >>>>>>>>>>>>> course the older set v5 1...10). >>>>>>>>>>>>> >>>>>>>>>>>>> The performance of the sd-card and the mmc-chip of my minimx >>>>>>>>>>>>> is much better now. >>>>>>>>>>>>> >>>>>>>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>>>>>>> >>>>>>>>>>>>> But: >>>>>>>>>>>>> the wifi-adapter is no longer operational. The problem starts >>>>>>>>>>>>> with patch 3 and gets worse with patch 5. >>>>>>>>>>>>> >>>>>>>>>>>>> the adapter (ap6330) is attached to the sdio port of the the >>>>>>>>>>>>> s905. (=mmc1) >>>>>>>>>>>>> >>>>>>>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>>>>>>> The board I test on supports block devices only. >>>>>>>>>>>> >>>>>>>>>>>> Could you please share few more details: >>>>>>>>>>>> - Drivers involved >>>>>>>>>>>> - All syslog messages related to the device / driver >>>>>>>>>>>> >>>>>>>>>>>> And please set the relevant mailing lists on cc when providing >>>>>>>>>>>> test feedback. >>>>>>>>>>>> Others might find your feedback helpful too. >>>>>>>>>>>> >>>>>>>>>>>> Thanks, Heiner >>>>>>>>>>>> >>>>>>>>>>>>> so i think it is important to test your patch set asap on an >>>>>>>>>>>>> officially supported board with a wifi adapter). >>>>>>>>>>>>> >>>>>>>>>>>>> regards >>>>>>>>>>>>> Helmut >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as >>>>>>>>>>> a module and loaded via /etc/modules. >>>>>>>>>>> the driver depends on the modules brcmutil and cfg80211, which >>>>>>>>>>> are auto loaded. >>>>>>>>>>> >>>>>>>>>>> my user space is debian unstable. The kernel is cross compiled >>>>>>>>>>> on my x86-64 laptop with gcc 5.4.1 >>>>>>>>>>> >>>>>>>>>>> i use my own kernel configuration without an initial ramdisk. >>>>>>>>>>> mmc, usb & ext4 drivers are compiled into the kernel >>>>>>>>>>> >>>>>>>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>>>>>>> >>>>>>>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card >>>>>>>>>>> reader). >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> here is the filtered (mmc|brcmfmac) syslog output when only >>>>>>>>>>> patches 1 & 2 are applied >>>>>>>>>>> >>>>>>>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>>>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>>>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware >>>>>>>>>>> version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID >>>>>>>>>>> 01-72f124c5 >>>>>>>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 184 >>>>>>>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 188 >>>>>>>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 192 >>>>>>>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 196 >>>>>>>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 200 >>>>>>>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 204 >>>>>>>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 208 >>>>>>>>>>> >>>>>>>>>>> this is the output after adding patch 3 >>>>>>>>>>> >>>>>>>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>>>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>>>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer >>>>>>>>>>> failed <<<===== >>>>>>>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error >>>>>>>>>>> -84 on writing 239507 membytes at 0x00000000 >>>>>>>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle >>>>>>>>>>> image file download failed >>>>>>>>>>> >>>>>>>>>>> and this is the output after adding patches 4 & 5 >>>>>>>>>>> >>>>>>>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 >>>>>>>>>>> KiB <<<===== >>>>>>>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>>>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>>>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>>>>>> supported <<<===== >>>>>>>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: >>>>>>>>>>> brcmf_chip_attach failed! >>>>>>>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: >>>>>>>>>>> brcmf_sdio_probe_attach failed >>>>>>>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>>>>>> failed -19... >>>>>>>>>>> >>>>>>>>>>> regards >>>>>>>>>>> Helmut >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thanks a lot for the additional information. The first version >>>>>>>>>> of the patch >>>>>>>>>> set broke byte mode obviously (block mode is working fine). >>>>>>>>>> >>>>>>>>>> Before submitting a new version of the patch set: >>>>>>>>>> Could you please apply patches 1, 2, and 4 of the patch set plus >>>>>>>>>> the >>>>>>>>>> following one and re-test? >>>>>>>>>> >>>>>>>>>> Thanks, Heiner >>>>>>>>>> >>>>>>>>>> --- >>>>>>>>>> drivers/mmc/host/meson-gx-mmc.c | 222 >>>>>>>>>> ++++++++++++++++++++++------------------ >>>>>>>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>>>>>>> >>>>>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> index 6bfd3da9..ca685902 100644 >>>>>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> @@ -121,6 +121,13 @@ >>>>>>>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>>>>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>>>>>>> >>>>>>>>>> +struct sd_emmc_desc { >>>>>>>>>> + u32 cmd_cfg; >>>>>>>>>> + u32 cmd_arg; >>>>>>>>>> + u32 cmd_data; >>>>>>>>>> + u32 cmd_resp; >>>>>>>>>> +}; >>>>>>>>>> + >>>>>>>>>> struct meson_host { >>>>>>>>>> struct device *dev; >>>>>>>>>> struct mmc_host *mmc; >>>>>>>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>>>>>>> struct clk_divider cfg_div; >>>>>>>>>> struct clk *cfg_div_clk; >>>>>>>>>> >>>>>>>>>> - unsigned int bounce_buf_size; >>>>>>>>>> - void *bounce_buf; >>>>>>>>>> - dma_addr_t bounce_dma_addr; >>>>>>>>>> + struct sd_emmc_desc *descs; >>>>>>>>>> + dma_addr_t descs_dma_addr; >>>>>>>>>> >>>>>>>>>> bool vqmmc_enabled; >>>>>>>>>> }; >>>>>>>>>> >>>>>>>>>> -struct sd_emmc_desc { >>>>>>>>>> - u32 cmd_cfg; >>>>>>>>>> - u32 cmd_arg; >>>>>>>>>> - u32 cmd_data; >>>>>>>>>> - u32 cmd_resp; >>>>>>>>>> -}; >>>>>>>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>>>>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>>>>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>>>>>>> @@ -185,6 +185,36 @@ static struct mmc_command >>>>>>>>>> *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>>>>>>> return NULL; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct >>>>>>>>>> mmc_data *data) >>>>>>>>>> +{ >>>>>>>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : >>>>>>>>>> DMA_FROM_DEVICE; >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct >>>>>>>>>> mmc_request *mrq) >>>>>>>>>> +{ >>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>> + >>>>>>>>>> + if (!data) >>>>>>>>>> + return; >>>>>>>>>> + >>>>>>>>>> + data->host_cookie = true; >>>>>>>>>> + >>>>>>>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, >>>>>>>>>> data->sg_len, >>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>> + if (!data->sg_count) >>>>>>>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct >>>>>>>>>> mmc_request *mrq, >>>>>>>>>> + int err) >>>>>>>>>> +{ >>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>> + >>>>>>>>>> + if (data && data->sg_count) >>>>>>>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned >>>>>>>>>> long clk_rate) >>>>>>>>>> { >>>>>>>>>> struct mmc_host *mmc = host->mmc; >>>>>>>>>> @@ -434,104 +464,102 @@ static void >>>>>>>>>> meson_mmc_request_done(struct mmc_host *mmc, >>>>>>>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct >>>>>>>>>> mmc_command *cmd) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>>>>>>> - u32 cfg; >>>>>>>>>> - u8 blk_len, cmd_cfg_timeout; >>>>>>>>>> - unsigned int xfer_bytes = 0; >>>>>>>>>> + struct sd_emmc_desc *desc = host->descs; >>>>>>>>>> + struct mmc_data *data = cmd->data; >>>>>>>>>> + struct scatterlist *sg; >>>>>>>>>> + u32 cfg, cmd_cfg = 0; >>>>>>>>>> + u8 blk_len; >>>>>>>>>> + int i; >>>>>>>>>> >>>>>>>>>> - /* Setup descriptors */ >>>>>>>>>> dma_rmb(); >>>>>>>>>> - desc = &desc_tmp; >>>>>>>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>>>>>>> >>>>>>>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>> - desc->cmd_arg = cmd->arg; >>>>>>>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>> >>>>>>>>>> /* Response */ >>>>>>>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>>>>>>> if (cmd->flags & MMC_RSP_136) >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>> - desc->cmd_resp = 0; >>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>> >>>>>>>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>> >>>>>>>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>> } else { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> - /* data? */ >>>>>>>>>> - if (cmd->data) { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>> - if (cmd->data->blocks > 1) { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>> + if (data) { >>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>> + >>>>>>>>>> + if (data->blocks > 1) { >>>>>>>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>> >>>>>>>>>> /* check if block-size matches, if not update */ >>>>>>>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>>>>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << >>>>>>>>>> CFG_BLK_LEN_SHIFT); >>>>>>>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>>>>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>>>>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> >>>>>>>>>> %d\n", >>>>>>>>>> - __func__, blk_len, >>>>>>>>>> - ilog2(cmd->data->blksz)); >>>>>>>>>> - blk_len = ilog2(cmd->data->blksz); >>>>>>>>>> + if (blk_len != ilog2(data->blksz)) { >>>>>>>>>> + dev_dbg(host->dev, >>>>>>>>>> + "%s: update blk_len %d -> %d\n", >>>>>>>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>>>>>>> + blk_len = ilog2(data->blksz); >>>>>>>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>>>>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>>>>>>> } >>>>>>>>>> - } else { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> - cmd->data->bytes_xfered = 0; >>>>>>>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>>>>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>>>>>>> - dma_wmb(); >>>>>>>>>> - } else { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>>>>>>> - } >>>>>>>>>> + data->bytes_xfered = 0; >>>>>>>>>> + if (data->flags & MMC_DATA_WRITE) >>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>> >>>>>>>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>>>>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>> + >>>>>>>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>>>>> + unsigned int len = sg_dma_len(sg); >>>>>>>>>> + >>>>>>>>>> + if (data->blocks > 1) >>>>>>>>>> + len /= data->blksz; >>>>>>>>>> + >>>>>>>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>>>>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>>>>>>> + CMD_CFG_LENGTH_SHIFT; >>>>>>>>>> + if (i > 0) >>>>>>>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>>>>>>> + desc[i].cmd_arg = cmd->arg; >>>>>>>>>> + desc[i].cmd_resp = 0; >>>>>>>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>>>>>>> + } >>>>>>>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>> >>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>>>>>>> } else { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << >>>>>>>>>> CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>>>>>>> + desc[0].cmd_arg = cmd->arg; >>>>>>>>>> + desc[0].cmd_resp = 0; >>>>>>>>>> + desc[0].cmd_data = 0; >>>>>>>>>> } >>>>>>>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>>>>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>> >>>>>>>>>> host->cmd = cmd; >>>>>>>>>> >>>>>>>>>> - /* Last descriptor */ >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>>>>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>>>>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>>>>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>>>>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>>>>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>>>>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> static void meson_mmc_request(struct mmc_host *mmc, struct >>>>>>>>>> mmc_request *mrq) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>> + bool needs_pre_post_req = mrq->data && >>>>>>>>>> !mrq->data->host_cookie; >>>>>>>>>> + >>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>> + meson_mmc_pre_req(mmc, mrq); >>>>>>>>>> >>>>>>>>>> /* Stop execution */ >>>>>>>>>> writel(0, host->regs + SD_EMMC_START); >>>>>>>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct >>>>>>>>>> mmc_host *mmc, struct mmc_request *mrq) >>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>>>>>>> else >>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>>>>>>> + >>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct >>>>>>>>>> mmc_command *cmd) >>>>>>>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>> void *dev_id) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>> struct mmc_command *cmd; >>>>>>>>>> + struct mmc_data *data; >>>>>>>>>> u32 irq_en, status, raw_status; >>>>>>>>>> irqreturn_t ret = IRQ_HANDLED; >>>>>>>>>> >>>>>>>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>> void *dev_id) >>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>> return IRQ_NONE; >>>>>>>>>> >>>>>>>>>> + data = cmd->data; >>>>>>>>>> + >>>>>>>>>> spin_lock(&host->lock); >>>>>>>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>>>>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>> void *dev_id) >>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>>>>>>> cmd->error = -ETIMEDOUT; >>>>>>>>>> } >>>>>>>>>> + >>>>>>>>>> + if (data && !cmd->error) >>>>>>>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>>>>>>> + >>>>>>>>>> if (status & IRQ_SDIO) >>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>>>>>>> >>>>>>>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>>>>>>> - ret = IRQ_WAKE_THREAD; >>>>>>>>>> - else { >>>>>>>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>>>>>>> + if (meson_mmc_get_next_command(cmd)) >>>>>>>>>> + ret = IRQ_WAKE_THREAD; >>>>>>>>>> + } else { >>>>>>>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC >>>>>>>>>> CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>>>>>>> status, cmd->opcode, cmd->arg, >>>>>>>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>>>>>>> @@ -642,26 +681,12 @@ static irqreturn_t >>>>>>>>>> meson_mmc_irq_thread(int irq, void *dev_id) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>>>>>>> - struct mmc_data *data; >>>>>>>>>> - unsigned int xfer_bytes; >>>>>>>>>> >>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>> return IRQ_NONE; >>>>>>>>>> >>>>>>>>>> - data = cmd->data; >>>>>>>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>>>>>>> - xfer_bytes = data->blksz * data->blocks; >>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>> - data->bytes_xfered = xfer_bytes; >>>>>>>>>> - } >>>>>>>>>> - >>>>>>>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>>>>>>> - if (next_cmd) >>>>>>>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>> - else >>>>>>>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>>>>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>> >>>>>>>>>> return IRQ_HANDLED; >>>>>>>>>> } >>>>>>>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops >>>>>>>>>> meson_mmc_ops = { >>>>>>>>>> .request = meson_mmc_request, >>>>>>>>>> .set_ios = meson_mmc_set_ios, >>>>>>>>>> .get_cd = meson_mmc_get_cd, >>>>>>>>>> + .pre_req = meson_mmc_pre_req, >>>>>>>>>> + .post_req = meson_mmc_post_req, >>>>>>>>>> }; >>>>>>>>>> >>>>>>>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>>>>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct >>>>>>>>>> platform_device *pdev) >>>>>>>>>> >>>>>>>>>> mmc->caps |= MMC_CAP_CMD23; >>>>>>>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>>>>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>> - >>>>>>>>>> - /* data bounce buffer */ >>>>>>>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>>>>>>> - host->bounce_buf = >>>>>>>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>>>>>>> - if (host->bounce_buf == NULL) { >>>>>>>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce >>>>>>>>>> buffer.\n"); >>>>>>>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>>>>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>>>>>>> + >>>>>>>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>>>>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>>>>>>> + if (!host->descs) { >>>>>>>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer >>>>>>>>>> failed\n"); >>>>>>>>>> ret = -ENOMEM; >>>>>>>>>> goto err_div_clk; >>>>>>>>>> } >>>>>>>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct >>>>>>>>>> platform_device *pdev) >>>>>>>>>> /* disable interrupts */ >>>>>>>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>> >>>>>>>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>>>>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>>>>>>> + host->descs_dma_addr); >>>>>>>>>> >>>>>>>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>>>>>>> clk_disable_unprepare(host->core_clk); >>>>>>>>>> >>>>>>>>> >>>>>>>>> compared to the patches 1...5 there is absolutely no change to >>>>>>>>> patches 1, 2, 4 and the above. Neither syslog nor performance. >>>>>>>>> >>>>>>>> Thanks for re-testing. I have a little bit of a hard time to >>>>>>>> understand why SD and eMMC mode >>>>>>>> are working but SDIO (at least with brcfmac) is not. Especially as >>>>>>>> I don't have HW to test SDIO mode on. >>>>>>>> >>>>>>>> After patches 1, 2, 4 the system is still working normally? >>>>>>>> And would it be possible for you to compile a DEBUG kernel and >>>>>>>> post the mmc/brcmfmac related output? >>>>>>>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>>>>>>> >>>>>>>> Last but not least, could you please post /proc/interrupts ? This >>>>>>>> would give an idea whether any SDIO >>>>>>>> or just specific ones fail. >>>>>>>> >>>>>>>> Thanks, Heiner >>>>>>>> >>>>>>>>> regards >>>>>>>>> Helmut >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> i enabled the debug flags for mmc and brcmfmac in the kernel >>>>>>> configuration. >>>>>>> For the test i also changed meson-gx-mmc from built-in to module. >>>>>>> This resulted in a different order of the mmc devices. The >>>>>>> sdio/wifi is now mmc0 and not mmc1 >>>>>>> >>>>>>> Without your new patch the wifi adapter works normally. >>>>>>> >>>>>>> The debug info was produced with following commad sequence >>>>>>> dmesg -n 8 >>>>>>> dmesg -D >>>>>>> logger "loading meson-gx-mmc...." >>>>>>> modprobe meson-gx-mmc >>>>>>> sleep 1 >>>>>>> logger "loading brcmfmac" >>>>>>> modprobe brcmfmac >>>>>>> logger "modules loaded" >>>>>>> sleep 1 >>>>>>> cp /var/log/syslog ~/syslog >>>>>>> cp /proc/interrupts ~/interrupts >>>>>>> >>>>>>> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >>>>>>> >>>>>>> because of the length of the files i removed most lines of the >>>>>>> loading of meson-gx-mmc >>>>>>> >>>>>>> unhandled interrupts: independent of the number of applied patches >>>>>>> i've always got 11 of them. >>>>>>> Only the timings differed with the applied patches >>>>>>> >>>>>>> the is the log for applied patches 1, 2, 4 & the new one >>>>>>> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >>>>>>> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>> 400000 -> 52000000 >>>>>>> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>> 52000000 != actual rate 50000000 >>>>>>> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>> loading brcmfmac >>>>>>> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data >>>>>>> available. >>>>>>> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>> brcmf_sdiod_probe... >>>>>>> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >>>>>>> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >>>>>>> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >>>>>>> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000a, nbytes=1 >>>>>>> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000b, nbytes=1 >>>>>>> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000c, nbytes=1 >>>>>>> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x08000, nbytes=4 >>>>>>> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>> 1000 ms nsac 0 >>>>>>> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731881] mmc0: 4 bytes transferred: 0 >>>>>>> [ 48.731887] brcmfmac: brcmf_sdiod_regrl >>>>>>> data:0x00000000 <<<<===== wrong! >>>>>>> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >>>>>>> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x21 >>>>>>> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >>>>>>> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, >>>>>>> data:0x00 >>>>>>> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000f, nbytes=1 >>>>>>> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >>>>>>> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x08000, nbytes=4 >>>>>>> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>> 1000 ms nsac 0 >>>>>>> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732235] mmc0: 4 bytes transferred: 0 >>>>>>> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>>>> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: >>>>>>> BCM0, rev=0 >>>>>>> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>> supported >>>>>>> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: >>>>>>> brcmf_chip_attach failed! >>>>>>> [ 48.732273] brcmfmac: brcmf_sdio_probe: >>>>>>> brcmf_sdio_probe_attach failed >>>>>>> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >>>>>>> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering >>>>>>> oob=0 sd=0 >>>>>>> [ 48.732290] brcmfmac: brcmf_detach Enter >>>>>>> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >>>>>>> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >>>>>>> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >>>>>>> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >>>>>>> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >>>>>>> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >>>>>>> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>> failed -19... >>>>>>> >>>>>>> this is the debug data for applied patches 1,2 & 4 (left only few >>>>>>> lines after the first CMD53) >>>>>>> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >>>>>>> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>> 400000 -> 52000000 >>>>>>> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>> 52000000 != actual rate 50000000 >>>>>>> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>> loading brcmfmac >>>>>>> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data >>>>>>> available. >>>>>>> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>> brcmf_sdiod_probe... >>>>>>> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >>>>>>> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >>>>>>> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >>>>>>> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000a, nbytes=1 >>>>>>> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000b, nbytes=1 >>>>>>> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000c, nbytes=1 >>>>>>> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x08000, nbytes=4 >>>>>>> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>> 1000 ms nsac 0 >>>>>>> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796829] mmc0: 4 bytes transferred: 0 >>>>>>> [ 53.796836] brcmfmac: brcmf_sdiod_regrl >>>>>>> data:0x16044330 <<<<<====== ok >>>>>>> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >>>>>>> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> >>>>>>> if you need more data: just ask ;-) >>>>>>> >>>>>> Thanks a lot for the logs. So the first read returns 0 instead of >>>>>> the actual register value. >>>>>> Could you please apply the following on top of 1, 2, 4, new one and >>>>>> send the log? >>>>>> I hope the two debug messages bring me closer to the root cause of >>>>>> the issue. >>>>>> >>>>>> Rgds, Heiner >>>>>> >>>>>> >>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>> index 3b3ddf3e..d6d2d1a1 100644 >>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>> @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>>>> *mmc, struct mmc_command *cmd) >>>>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>> unsigned int len = sg_dma_len(sg); >>>>>> >>>>>> + if (cmd->opcode == 53) >>>>>> + dev_info(host->info, "cmd 53: idx %d len %u\n", i, >>>>>> len); >>>>>> + >>>>>> if (data->blocks > 1) >>>>>> len /= data->blksz; >>>>>> >>>>>> @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>>>> *dev_id) >>>>>> >>>>>> meson_mmc_read_resp(host->mmc, cmd); >>>>>> >>>>>> + if (cmd->opcode == 53) >>>>>> + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", >>>>>> host->descs[0].cmd_data); >>>>>> + >>>>>> cmd->error = 0; >>>>>> if (status & IRQ_RXD_ERR_MASK) { >>>>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>>>> >>>>> >>>>> here is the output: >>>>> [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>> addr=0x08000, nbytes=4 >>>>> [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>> [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms >>>>> nsac 0 >>>>> [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 >>>>> [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 >>>>> [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 >>>>> 00000000 >>>>> [ 107.510541] mmc0: 4 bytes transferred: 0 >>>>> [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>> >>>>> Helmut >>>>> >>>>> >>>> Weird .. Everything looks ok so far. I don't see a reason why this >>>> small read DMA returns >>>> zeroed bytes only whilst bigger ones in SD/eMMC work perfectly fine. >>>> >>>> OK, one last attempt before I have to think about a better way to >>>> tackle this issue. >>>> >>>> Could you please replace the last logging extension patch with this one? >>>> (I just added a memory barrier to be sure to read the actual value.) >>>> >>>> Thanks, Heiner >>>> >>>> >>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>> b/drivers/mmc/host/meson-gx-mmc.c >>>> index ca685902..5b511944 100644 >>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>> @@ -523,6 +523,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>> *mmc, struct mmc_command *cmd) >>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>> unsigned int len = sg_dma_len(sg); >>>> >>>> + if (cmd->opcode == 53) >>>> + pr_info("sg: idx %d len %u\n", i, len); >>>> + >>>> if (data->blocks > 1) >>>> len /= data->blksz; >>>> >>>> @@ -619,6 +622,11 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>> *dev_id) >>>> >>>> meson_mmc_read_resp(host->mmc, cmd); >>>> >>>> + if (cmd->opcode == 53) { >>>> + dma_rmb(); >>>> + pr_info("cmd 53 cmd_data0: %08x\n", host->descs[0].cmd_data); >>>> + } >>>> + >>>> cmd->error = 0; >>>> if (status & IRQ_RXD_ERR_MASK) { >>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>> >>> >>> the output is not really different (for the 2 cmd53) >>> [ 37.113577] sg: idx 0 len 4 >>> [ 37.113595] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>> [ 37.114016] sg: idx 0 len 4 >>> [ 37.114034] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>> >>> Helmut >> >> >> I've added my own debugging code to both variations of the driver. but without a positiv result >> >> here are the patches >> >> for the fully operational version >> >> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-18 15:22:31.000000000 +0100 >> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 13:02:05.254762191 +0100 >> @@ -468,6 +468,9 @@ static void meson_mmc_start_cmd(struct m >> >> /* data? */ >> if (cmd->data) { >> + >> + dev_dbg(host->dev, "DBG data"); >> + >> desc->cmd_cfg |= CMD_CFG_DATA_IO; >> if (cmd->data->blocks > 1) { >> desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >> @@ -526,6 +529,10 @@ static void meson_mmc_start_cmd(struct m >> writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >> writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >> wmb(); /* ensure descriptor is written before kicked */ >> + >> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >> + desc->cmd_cfg, desc->cmd_arg, desc->cmd_resp); >> + >> writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >> } >> >> @@ -576,6 +583,8 @@ static irqreturn_t meson_mmc_irq(int irq >> raw_status = readl(host->regs + SD_EMMC_STATUS); >> status = raw_status & irq_en; >> >> + dev_dbg(host->dev, "DBG status 0x%08x", status); >> + >> if (!status) { >> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >> raw_status, irq_en); >> >> and this is for the version with the sdio problem >> >> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:50:32.956474080 +0100 >> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:57:27.185837225 +0100 >> @@ -493,6 +493,9 @@ static void meson_mmc_start_cmd(struct m >> } >> >> if (data) { >> + >> + dev_dbg(host->dev, "DBG data"); >> + >> cmd_cfg |= CMD_CFG_DATA_IO; >> >> if (data->blocks > 1) { >> @@ -549,6 +552,10 @@ static void meson_mmc_start_cmd(struct m >> host->cmd = cmd; >> >> wmb(); /* ensure descriptor is written before kicked */ >> + >> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >> + desc[0].cmd_cfg, desc[0].cmd_arg, desc[0].cmd_resp); >> + >> cfg = host->descs_dma_addr | START_DESC_BUSY; >> writel(cfg, host->regs + SD_EMMC_START); >> } >> @@ -610,6 +617,8 @@ static irqreturn_t meson_mmc_irq(int irq >> raw_status = readl(host->regs + SD_EMMC_STATUS); >> status = raw_status & irq_en; >> >> + dev_dbg(host->dev, "DBG status 0x%08x", status); >> + >> if (!status) { >> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >> raw_status, irq_en); >> >> the filtered logs are identical up and including the 2nd cmd53. >> >> Helmut >> >> > Thanks. Really appreciate your support. Meanwhile I think there must be a bug > either in the DMA subsystem or there's a hw bug causing issues with very small > transfers. That's the only difference between SD/eMMC and SDIO on that level: > SD/eMMC always transfers 512 byte blocks whilst SDIO also uses very small > transfers. > > For up to 4 bytes the chip supports an alternative transfer method. > Let's try this as workaround. > > Could you please apply: > patches 1, 2, 4 + the updated bigger patch I sent via mail + the following: > > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 4f9fafd3..cf9be13f 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -185,6 +185,12 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) > return NULL; > } > > +static bool meson_mmc_small_read(const struct mmc_data *data) > +{ > + return data && data->blocks <= 1 && data->blksz <= 4 && > + data->flags & MMC_DATA_READ; > +} > + > static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) > { > return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; > @@ -208,11 +214,22 @@ static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) > static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, > int err) > { > + struct meson_host *host = mmc_priv(mmc); > struct mmc_data *data = mrq->data; > > if (data && data->sg_count) > dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, > meson_mmc_get_data_dir(data)); > + > + if (meson_mmc_small_read(data)) { > + int cnt; > + > + dma_rmb(); > + cnt = sg_copy_from_buffer(data->sg, data->sg_len, > + &host->descs[0].cmd_data, data->blksz); > + if (cnt != data->blksz) > + dev_err(host->dev, "error copying to scatterlist\n"); > + } > } > > static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) > @@ -493,6 +510,8 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > } > > if (data) { > + bool small_read = meson_mmc_small_read(data); > + > cmd_cfg |= CMD_CFG_DATA_IO; > > if (data->blocks > 1) { > @@ -513,6 +532,14 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > } > } > > + /* > + * workaround for most likely hw bug > + * if up to 4 bytes receive them in the descriptor instead > + * of using dma_map_sg/dma_unmap_sg > + */ > + if (small_read) > + cmd_cfg |= CMD_CFG_DATA_NUM; > + > data->bytes_xfered = 0; > if (data->flags & MMC_DATA_WRITE) > cmd_cfg |= CMD_CFG_DATA_WR; > @@ -533,7 +560,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > desc[i].cmd_cfg |= CMD_CFG_NO_CMD; > desc[i].cmd_arg = cmd->arg; > desc[i].cmd_resp = 0; > - desc[i].cmd_data = sg_dma_address(sg); > + desc[i].cmd_data = small_read ? 0 : sg_dma_address(sg); > } > desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; > > Hallo Heiner, here is the result: [ 44.375027] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 [ 44.375034] mmc0: starting CMD53 arg 15000004 flags 000001b5 [ 44.375037] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 [ 44.375047] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 [ 44.375050] mmc0: 4 bytes transferred: 0 [ 44.375057] brcmfmac: brcmf_sdiod_regrl data:0x16044330 [ 44.375059] brcmfmac: F1 signature read @0x18000000=0x16044330 [ 44.375296] mmc0: starting CMD53 arg 15000004 flags 000001b5 [ 44.375299] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 [ 44.375309] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 [ 44.375311] mmc0: 4 bytes transferred: 0 [ 44.375323] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<< expected 0x16044330 [ 44.375327] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 [ 44.375330] brcmfmac: brcmf_chip_recognition: SB chip is not supported [ 44.375333] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! [ 44.375337] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed [ 44.375339] brcmfmac: brcmf_sdio_remove Enter the 1. cmd53 returned the correct data. the second one failed. 0x0 instead of 0x16044330 (the same value as in the 1. cmd53) Helmut From mboxrd@z Thu Jan 1 00:00:00 1970 From: hgkr.klein@gmail.com (Helmut Klein) Date: Wed, 22 Mar 2017 11:09:17 +0100 Subject: meson-gx-mmc: 2nd patch set In-Reply-To: <54049145-cd6a-8e14-6011-e1e33f687cf5@gmail.com> References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> <82061526-2d16-5710-89a6-afbeecbf0c57@gmail.com> <54049145-cd6a-8e14-6011-e1e33f687cf5@gmail.com> Message-ID: <0442ae99-de48-2410-eccb-0b1f44afa249@gmail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org On 20.03.2017 20:54, Heiner Kallweit wrote: > Am 20.03.2017 um 14:01 schrieb Helmut Klein: >> On 20.03.2017 13:51, Helmut Klein wrote: >>> On 19.03.2017 23:39, Heiner Kallweit wrote: >>>> Am 19.03.2017 um 21:46 schrieb Helmut Klein: >>>>> On 19.03.2017 16:35, Heiner Kallweit wrote: >>>>>> Am 19.03.2017 um 12:23 schrieb Helmut Klein: >>>>>>> On 18.03.2017 11:24, Heiner Kallweit wrote: >>>>>>>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>>>>>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>>>>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>>>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>>>>>>> Hallo Heiner, >>>>>>>>>>>>> >>>>>>>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of >>>>>>>>>>>>> course the older set v5 1...10). >>>>>>>>>>>>> >>>>>>>>>>>>> The performance of the sd-card and the mmc-chip of my minimx >>>>>>>>>>>>> is much better now. >>>>>>>>>>>>> >>>>>>>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>>>>>>> >>>>>>>>>>>>> But: >>>>>>>>>>>>> the wifi-adapter is no longer operational. The problem starts >>>>>>>>>>>>> with patch 3 and gets worse with patch 5. >>>>>>>>>>>>> >>>>>>>>>>>>> the adapter (ap6330) is attached to the sdio port of the the >>>>>>>>>>>>> s905. (=mmc1) >>>>>>>>>>>>> >>>>>>>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>>>>>>> The board I test on supports block devices only. >>>>>>>>>>>> >>>>>>>>>>>> Could you please share few more details: >>>>>>>>>>>> - Drivers involved >>>>>>>>>>>> - All syslog messages related to the device / driver >>>>>>>>>>>> >>>>>>>>>>>> And please set the relevant mailing lists on cc when providing >>>>>>>>>>>> test feedback. >>>>>>>>>>>> Others might find your feedback helpful too. >>>>>>>>>>>> >>>>>>>>>>>> Thanks, Heiner >>>>>>>>>>>> >>>>>>>>>>>>> so i think it is important to test your patch set asap on an >>>>>>>>>>>>> officially supported board with a wifi adapter). >>>>>>>>>>>>> >>>>>>>>>>>>> regards >>>>>>>>>>>>> Helmut >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as >>>>>>>>>>> a module and loaded via /etc/modules. >>>>>>>>>>> the driver depends on the modules brcmutil and cfg80211, which >>>>>>>>>>> are auto loaded. >>>>>>>>>>> >>>>>>>>>>> my user space is debian unstable. The kernel is cross compiled >>>>>>>>>>> on my x86-64 laptop with gcc 5.4.1 >>>>>>>>>>> >>>>>>>>>>> i use my own kernel configuration without an initial ramdisk. >>>>>>>>>>> mmc, usb & ext4 drivers are compiled into the kernel >>>>>>>>>>> >>>>>>>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>>>>>>> >>>>>>>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card >>>>>>>>>>> reader). >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> here is the filtered (mmc|brcmfmac) syslog output when only >>>>>>>>>>> patches 1 & 2 are applied >>>>>>>>>>> >>>>>>>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>>>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>>>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware >>>>>>>>>>> version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID >>>>>>>>>>> 01-72f124c5 >>>>>>>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 184 >>>>>>>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 188 >>>>>>>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 192 >>>>>>>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 196 >>>>>>>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 200 >>>>>>>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 204 >>>>>>>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>> unexpected firmware channel 208 >>>>>>>>>>> >>>>>>>>>>> this is the output after adding patch 3 >>>>>>>>>>> >>>>>>>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>>>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>>>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer >>>>>>>>>>> failed <<<===== >>>>>>>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error >>>>>>>>>>> -84 on writing 239507 membytes at 0x00000000 >>>>>>>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle >>>>>>>>>>> image file download failed >>>>>>>>>>> >>>>>>>>>>> and this is the output after adding patches 4 & 5 >>>>>>>>>>> >>>>>>>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 >>>>>>>>>>> KiB <<<===== >>>>>>>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>>>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>>>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>>>>>> supported <<<===== >>>>>>>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: >>>>>>>>>>> brcmf_chip_attach failed! >>>>>>>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: >>>>>>>>>>> brcmf_sdio_probe_attach failed >>>>>>>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>>>>>> failed -19... >>>>>>>>>>> >>>>>>>>>>> regards >>>>>>>>>>> Helmut >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thanks a lot for the additional information. The first version >>>>>>>>>> of the patch >>>>>>>>>> set broke byte mode obviously (block mode is working fine). >>>>>>>>>> >>>>>>>>>> Before submitting a new version of the patch set: >>>>>>>>>> Could you please apply patches 1, 2, and 4 of the patch set plus >>>>>>>>>> the >>>>>>>>>> following one and re-test? >>>>>>>>>> >>>>>>>>>> Thanks, Heiner >>>>>>>>>> >>>>>>>>>> --- >>>>>>>>>> drivers/mmc/host/meson-gx-mmc.c | 222 >>>>>>>>>> ++++++++++++++++++++++------------------ >>>>>>>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>>>>>>> >>>>>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> index 6bfd3da9..ca685902 100644 >>>>>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>> @@ -121,6 +121,13 @@ >>>>>>>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>>>>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>>>>>>> >>>>>>>>>> +struct sd_emmc_desc { >>>>>>>>>> + u32 cmd_cfg; >>>>>>>>>> + u32 cmd_arg; >>>>>>>>>> + u32 cmd_data; >>>>>>>>>> + u32 cmd_resp; >>>>>>>>>> +}; >>>>>>>>>> + >>>>>>>>>> struct meson_host { >>>>>>>>>> struct device *dev; >>>>>>>>>> struct mmc_host *mmc; >>>>>>>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>>>>>>> struct clk_divider cfg_div; >>>>>>>>>> struct clk *cfg_div_clk; >>>>>>>>>> >>>>>>>>>> - unsigned int bounce_buf_size; >>>>>>>>>> - void *bounce_buf; >>>>>>>>>> - dma_addr_t bounce_dma_addr; >>>>>>>>>> + struct sd_emmc_desc *descs; >>>>>>>>>> + dma_addr_t descs_dma_addr; >>>>>>>>>> >>>>>>>>>> bool vqmmc_enabled; >>>>>>>>>> }; >>>>>>>>>> >>>>>>>>>> -struct sd_emmc_desc { >>>>>>>>>> - u32 cmd_cfg; >>>>>>>>>> - u32 cmd_arg; >>>>>>>>>> - u32 cmd_data; >>>>>>>>>> - u32 cmd_resp; >>>>>>>>>> -}; >>>>>>>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>>>>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>>>>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>>>>>>> @@ -185,6 +185,36 @@ static struct mmc_command >>>>>>>>>> *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>>>>>>> return NULL; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct >>>>>>>>>> mmc_data *data) >>>>>>>>>> +{ >>>>>>>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : >>>>>>>>>> DMA_FROM_DEVICE; >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct >>>>>>>>>> mmc_request *mrq) >>>>>>>>>> +{ >>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>> + >>>>>>>>>> + if (!data) >>>>>>>>>> + return; >>>>>>>>>> + >>>>>>>>>> + data->host_cookie = true; >>>>>>>>>> + >>>>>>>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, >>>>>>>>>> data->sg_len, >>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>> + if (!data->sg_count) >>>>>>>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct >>>>>>>>>> mmc_request *mrq, >>>>>>>>>> + int err) >>>>>>>>>> +{ >>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>> + >>>>>>>>>> + if (data && data->sg_count) >>>>>>>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned >>>>>>>>>> long clk_rate) >>>>>>>>>> { >>>>>>>>>> struct mmc_host *mmc = host->mmc; >>>>>>>>>> @@ -434,104 +464,102 @@ static void >>>>>>>>>> meson_mmc_request_done(struct mmc_host *mmc, >>>>>>>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct >>>>>>>>>> mmc_command *cmd) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>>>>>>> - u32 cfg; >>>>>>>>>> - u8 blk_len, cmd_cfg_timeout; >>>>>>>>>> - unsigned int xfer_bytes = 0; >>>>>>>>>> + struct sd_emmc_desc *desc = host->descs; >>>>>>>>>> + struct mmc_data *data = cmd->data; >>>>>>>>>> + struct scatterlist *sg; >>>>>>>>>> + u32 cfg, cmd_cfg = 0; >>>>>>>>>> + u8 blk_len; >>>>>>>>>> + int i; >>>>>>>>>> >>>>>>>>>> - /* Setup descriptors */ >>>>>>>>>> dma_rmb(); >>>>>>>>>> - desc = &desc_tmp; >>>>>>>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>>>>>>> >>>>>>>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>> - desc->cmd_arg = cmd->arg; >>>>>>>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>> >>>>>>>>>> /* Response */ >>>>>>>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>>>>>>> if (cmd->flags & MMC_RSP_136) >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>> - desc->cmd_resp = 0; >>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>> >>>>>>>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>> >>>>>>>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>> } else { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> - /* data? */ >>>>>>>>>> - if (cmd->data) { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>> - if (cmd->data->blocks > 1) { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>> + if (data) { >>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>> + >>>>>>>>>> + if (data->blocks > 1) { >>>>>>>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>> >>>>>>>>>> /* check if block-size matches, if not update */ >>>>>>>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>>>>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << >>>>>>>>>> CFG_BLK_LEN_SHIFT); >>>>>>>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>>>>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>>>>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> >>>>>>>>>> %d\n", >>>>>>>>>> - __func__, blk_len, >>>>>>>>>> - ilog2(cmd->data->blksz)); >>>>>>>>>> - blk_len = ilog2(cmd->data->blksz); >>>>>>>>>> + if (blk_len != ilog2(data->blksz)) { >>>>>>>>>> + dev_dbg(host->dev, >>>>>>>>>> + "%s: update blk_len %d -> %d\n", >>>>>>>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>>>>>>> + blk_len = ilog2(data->blksz); >>>>>>>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>>>>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>>>>>>> } >>>>>>>>>> - } else { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> - cmd->data->bytes_xfered = 0; >>>>>>>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>>>>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>>>>>>> - dma_wmb(); >>>>>>>>>> - } else { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>>>>>>> - } >>>>>>>>>> + data->bytes_xfered = 0; >>>>>>>>>> + if (data->flags & MMC_DATA_WRITE) >>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>> >>>>>>>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>>>>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>> + >>>>>>>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>>>>> + unsigned int len = sg_dma_len(sg); >>>>>>>>>> + >>>>>>>>>> + if (data->blocks > 1) >>>>>>>>>> + len /= data->blksz; >>>>>>>>>> + >>>>>>>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>>>>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>>>>>>> + CMD_CFG_LENGTH_SHIFT; >>>>>>>>>> + if (i > 0) >>>>>>>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>>>>>>> + desc[i].cmd_arg = cmd->arg; >>>>>>>>>> + desc[i].cmd_resp = 0; >>>>>>>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>>>>>>> + } >>>>>>>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>> >>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>>>>>>> } else { >>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << >>>>>>>>>> CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>>>>>>> + desc[0].cmd_arg = cmd->arg; >>>>>>>>>> + desc[0].cmd_resp = 0; >>>>>>>>>> + desc[0].cmd_data = 0; >>>>>>>>>> } >>>>>>>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>>>>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>> >>>>>>>>>> host->cmd = cmd; >>>>>>>>>> >>>>>>>>>> - /* Last descriptor */ >>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>>>>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>>>>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>>>>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>>>>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>>>>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>>>>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> static void meson_mmc_request(struct mmc_host *mmc, struct >>>>>>>>>> mmc_request *mrq) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>> + bool needs_pre_post_req = mrq->data && >>>>>>>>>> !mrq->data->host_cookie; >>>>>>>>>> + >>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>> + meson_mmc_pre_req(mmc, mrq); >>>>>>>>>> >>>>>>>>>> /* Stop execution */ >>>>>>>>>> writel(0, host->regs + SD_EMMC_START); >>>>>>>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct >>>>>>>>>> mmc_host *mmc, struct mmc_request *mrq) >>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>>>>>>> else >>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>>>>>>> + >>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct >>>>>>>>>> mmc_command *cmd) >>>>>>>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>> void *dev_id) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>> struct mmc_command *cmd; >>>>>>>>>> + struct mmc_data *data; >>>>>>>>>> u32 irq_en, status, raw_status; >>>>>>>>>> irqreturn_t ret = IRQ_HANDLED; >>>>>>>>>> >>>>>>>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>> void *dev_id) >>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>> return IRQ_NONE; >>>>>>>>>> >>>>>>>>>> + data = cmd->data; >>>>>>>>>> + >>>>>>>>>> spin_lock(&host->lock); >>>>>>>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>>>>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>> void *dev_id) >>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>>>>>>> cmd->error = -ETIMEDOUT; >>>>>>>>>> } >>>>>>>>>> + >>>>>>>>>> + if (data && !cmd->error) >>>>>>>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>>>>>>> + >>>>>>>>>> if (status & IRQ_SDIO) >>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>>>>>>> >>>>>>>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>>>>>>> - ret = IRQ_WAKE_THREAD; >>>>>>>>>> - else { >>>>>>>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>>>>>>> + if (meson_mmc_get_next_command(cmd)) >>>>>>>>>> + ret = IRQ_WAKE_THREAD; >>>>>>>>>> + } else { >>>>>>>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC >>>>>>>>>> CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>>>>>>> status, cmd->opcode, cmd->arg, >>>>>>>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>>>>>>> @@ -642,26 +681,12 @@ static irqreturn_t >>>>>>>>>> meson_mmc_irq_thread(int irq, void *dev_id) >>>>>>>>>> { >>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>>>>>>> - struct mmc_data *data; >>>>>>>>>> - unsigned int xfer_bytes; >>>>>>>>>> >>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>> return IRQ_NONE; >>>>>>>>>> >>>>>>>>>> - data = cmd->data; >>>>>>>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>>>>>>> - xfer_bytes = data->blksz * data->blocks; >>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>> - data->bytes_xfered = xfer_bytes; >>>>>>>>>> - } >>>>>>>>>> - >>>>>>>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>>>>>>> - if (next_cmd) >>>>>>>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>> - else >>>>>>>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>>>>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>> >>>>>>>>>> return IRQ_HANDLED; >>>>>>>>>> } >>>>>>>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops >>>>>>>>>> meson_mmc_ops = { >>>>>>>>>> .request = meson_mmc_request, >>>>>>>>>> .set_ios = meson_mmc_set_ios, >>>>>>>>>> .get_cd = meson_mmc_get_cd, >>>>>>>>>> + .pre_req = meson_mmc_pre_req, >>>>>>>>>> + .post_req = meson_mmc_post_req, >>>>>>>>>> }; >>>>>>>>>> >>>>>>>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>>>>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct >>>>>>>>>> platform_device *pdev) >>>>>>>>>> >>>>>>>>>> mmc->caps |= MMC_CAP_CMD23; >>>>>>>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>>>>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>> - >>>>>>>>>> - /* data bounce buffer */ >>>>>>>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>>>>>>> - host->bounce_buf = >>>>>>>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>>>>>>> - if (host->bounce_buf == NULL) { >>>>>>>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce >>>>>>>>>> buffer.\n"); >>>>>>>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>>>>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>>>>>>> + >>>>>>>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>>>>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>>>>>>> + if (!host->descs) { >>>>>>>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer >>>>>>>>>> failed\n"); >>>>>>>>>> ret = -ENOMEM; >>>>>>>>>> goto err_div_clk; >>>>>>>>>> } >>>>>>>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct >>>>>>>>>> platform_device *pdev) >>>>>>>>>> /* disable interrupts */ >>>>>>>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>> >>>>>>>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>>>>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>>>>>>> + host->descs_dma_addr); >>>>>>>>>> >>>>>>>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>>>>>>> clk_disable_unprepare(host->core_clk); >>>>>>>>>> >>>>>>>>> >>>>>>>>> compared to the patches 1...5 there is absolutely no change to >>>>>>>>> patches 1, 2, 4 and the above. Neither syslog nor performance. >>>>>>>>> >>>>>>>> Thanks for re-testing. I have a little bit of a hard time to >>>>>>>> understand why SD and eMMC mode >>>>>>>> are working but SDIO (at least with brcfmac) is not. Especially as >>>>>>>> I don't have HW to test SDIO mode on. >>>>>>>> >>>>>>>> After patches 1, 2, 4 the system is still working normally? >>>>>>>> And would it be possible for you to compile a DEBUG kernel and >>>>>>>> post the mmc/brcmfmac related output? >>>>>>>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>>>>>>> >>>>>>>> Last but not least, could you please post /proc/interrupts ? This >>>>>>>> would give an idea whether any SDIO >>>>>>>> or just specific ones fail. >>>>>>>> >>>>>>>> Thanks, Heiner >>>>>>>> >>>>>>>>> regards >>>>>>>>> Helmut >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> i enabled the debug flags for mmc and brcmfmac in the kernel >>>>>>> configuration. >>>>>>> For the test i also changed meson-gx-mmc from built-in to module. >>>>>>> This resulted in a different order of the mmc devices. The >>>>>>> sdio/wifi is now mmc0 and not mmc1 >>>>>>> >>>>>>> Without your new patch the wifi adapter works normally. >>>>>>> >>>>>>> The debug info was produced with following commad sequence >>>>>>> dmesg -n 8 >>>>>>> dmesg -D >>>>>>> logger "loading meson-gx-mmc...." >>>>>>> modprobe meson-gx-mmc >>>>>>> sleep 1 >>>>>>> logger "loading brcmfmac" >>>>>>> modprobe brcmfmac >>>>>>> logger "modules loaded" >>>>>>> sleep 1 >>>>>>> cp /var/log/syslog ~/syslog >>>>>>> cp /proc/interrupts ~/interrupts >>>>>>> >>>>>>> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >>>>>>> >>>>>>> because of the length of the files i removed most lines of the >>>>>>> loading of meson-gx-mmc >>>>>>> >>>>>>> unhandled interrupts: independent of the number of applied patches >>>>>>> i've always got 11 of them. >>>>>>> Only the timings differed with the applied patches >>>>>>> >>>>>>> the is the log for applied patches 1, 2, 4 & the new one >>>>>>> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >>>>>>> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>> timeout >>>>>>> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>> 400000 -> 52000000 >>>>>>> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>> 52000000 != actual rate 50000000 >>>>>>> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>> loading brcmfmac >>>>>>> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data >>>>>>> available. >>>>>>> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>> brcmf_sdiod_probe... >>>>>>> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >>>>>>> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >>>>>>> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >>>>>>> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000a, nbytes=1 >>>>>>> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000b, nbytes=1 >>>>>>> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000c, nbytes=1 >>>>>>> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x08000, nbytes=4 >>>>>>> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>> 1000 ms nsac 0 >>>>>>> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731881] mmc0: 4 bytes transferred: 0 >>>>>>> [ 48.731887] brcmfmac: brcmf_sdiod_regrl >>>>>>> data:0x00000000 <<<<===== wrong! >>>>>>> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >>>>>>> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x21 >>>>>>> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >>>>>>> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, >>>>>>> data:0x00 >>>>>>> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000f, nbytes=1 >>>>>>> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >>>>>>> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x08000, nbytes=4 >>>>>>> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>> 1000 ms nsac 0 >>>>>>> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.732235] mmc0: 4 bytes transferred: 0 >>>>>>> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>>>> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: >>>>>>> BCM0, rev=0 >>>>>>> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>> supported >>>>>>> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: >>>>>>> brcmf_chip_attach failed! >>>>>>> [ 48.732273] brcmfmac: brcmf_sdio_probe: >>>>>>> brcmf_sdio_probe_attach failed >>>>>>> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >>>>>>> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering >>>>>>> oob=0 sd=0 >>>>>>> [ 48.732290] brcmfmac: brcmf_detach Enter >>>>>>> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >>>>>>> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >>>>>>> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >>>>>>> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >>>>>>> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >>>>>>> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >>>>>>> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>> failed -19... >>>>>>> >>>>>>> this is the debug data for applied patches 1,2 & 4 (left only few >>>>>>> lines after the first CMD53) >>>>>>> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >>>>>>> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>> 400000 -> 52000000 >>>>>>> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>> 52000000 != actual rate 50000000 >>>>>>> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>> loading brcmfmac >>>>>>> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data >>>>>>> available. >>>>>>> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>> brcmf_sdiod_probe... >>>>>>> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >>>>>>> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >>>>>>> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >>>>>>> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000a, nbytes=1 >>>>>>> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000b, nbytes=1 >>>>>>> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000c, nbytes=1 >>>>>>> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x08000, nbytes=4 >>>>>>> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>> 1000 ms nsac 0 >>>>>>> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796829] mmc0: 4 bytes transferred: 0 >>>>>>> [ 53.796836] brcmfmac: brcmf_sdiod_regrl >>>>>>> data:0x16044330 <<<<<====== ok >>>>>>> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >>>>>>> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>> 00000000 00000000 >>>>>>> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>> data:0x28 >>>>>>> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>> addr=0x1000e, nbytes=1 >>>>>>> >>>>>>> if you need more data: just ask ;-) >>>>>>> >>>>>> Thanks a lot for the logs. So the first read returns 0 instead of >>>>>> the actual register value. >>>>>> Could you please apply the following on top of 1, 2, 4, new one and >>>>>> send the log? >>>>>> I hope the two debug messages bring me closer to the root cause of >>>>>> the issue. >>>>>> >>>>>> Rgds, Heiner >>>>>> >>>>>> >>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>> index 3b3ddf3e..d6d2d1a1 100644 >>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>> @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>>>> *mmc, struct mmc_command *cmd) >>>>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>> unsigned int len = sg_dma_len(sg); >>>>>> >>>>>> + if (cmd->opcode == 53) >>>>>> + dev_info(host->info, "cmd 53: idx %d len %u\n", i, >>>>>> len); >>>>>> + >>>>>> if (data->blocks > 1) >>>>>> len /= data->blksz; >>>>>> >>>>>> @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>>>> *dev_id) >>>>>> >>>>>> meson_mmc_read_resp(host->mmc, cmd); >>>>>> >>>>>> + if (cmd->opcode == 53) >>>>>> + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", >>>>>> host->descs[0].cmd_data); >>>>>> + >>>>>> cmd->error = 0; >>>>>> if (status & IRQ_RXD_ERR_MASK) { >>>>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>>>> >>>>> >>>>> here is the output: >>>>> [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>> addr=0x08000, nbytes=4 >>>>> [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>> [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms >>>>> nsac 0 >>>>> [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 >>>>> [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 >>>>> [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 >>>>> 00000000 >>>>> [ 107.510541] mmc0: 4 bytes transferred: 0 >>>>> [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>> >>>>> Helmut >>>>> >>>>> >>>> Weird .. Everything looks ok so far. I don't see a reason why this >>>> small read DMA returns >>>> zeroed bytes only whilst bigger ones in SD/eMMC work perfectly fine. >>>> >>>> OK, one last attempt before I have to think about a better way to >>>> tackle this issue. >>>> >>>> Could you please replace the last logging extension patch with this one? >>>> (I just added a memory barrier to be sure to read the actual value.) >>>> >>>> Thanks, Heiner >>>> >>>> >>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>> b/drivers/mmc/host/meson-gx-mmc.c >>>> index ca685902..5b511944 100644 >>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>> @@ -523,6 +523,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>> *mmc, struct mmc_command *cmd) >>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>> unsigned int len = sg_dma_len(sg); >>>> >>>> + if (cmd->opcode == 53) >>>> + pr_info("sg: idx %d len %u\n", i, len); >>>> + >>>> if (data->blocks > 1) >>>> len /= data->blksz; >>>> >>>> @@ -619,6 +622,11 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>> *dev_id) >>>> >>>> meson_mmc_read_resp(host->mmc, cmd); >>>> >>>> + if (cmd->opcode == 53) { >>>> + dma_rmb(); >>>> + pr_info("cmd 53 cmd_data0: %08x\n", host->descs[0].cmd_data); >>>> + } >>>> + >>>> cmd->error = 0; >>>> if (status & IRQ_RXD_ERR_MASK) { >>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>> >>> >>> the output is not really different (for the 2 cmd53) >>> [ 37.113577] sg: idx 0 len 4 >>> [ 37.113595] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>> [ 37.114016] sg: idx 0 len 4 >>> [ 37.114034] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>> >>> Helmut >> >> >> I've added my own debugging code to both variations of the driver. but without a positiv result >> >> here are the patches >> >> for the fully operational version >> >> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-18 15:22:31.000000000 +0100 >> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 13:02:05.254762191 +0100 >> @@ -468,6 +468,9 @@ static void meson_mmc_start_cmd(struct m >> >> /* data? */ >> if (cmd->data) { >> + >> + dev_dbg(host->dev, "DBG data"); >> + >> desc->cmd_cfg |= CMD_CFG_DATA_IO; >> if (cmd->data->blocks > 1) { >> desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >> @@ -526,6 +529,10 @@ static void meson_mmc_start_cmd(struct m >> writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >> writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >> wmb(); /* ensure descriptor is written before kicked */ >> + >> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >> + desc->cmd_cfg, desc->cmd_arg, desc->cmd_resp); >> + >> writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >> } >> >> @@ -576,6 +583,8 @@ static irqreturn_t meson_mmc_irq(int irq >> raw_status = readl(host->regs + SD_EMMC_STATUS); >> status = raw_status & irq_en; >> >> + dev_dbg(host->dev, "DBG status 0x%08x", status); >> + >> if (!status) { >> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >> raw_status, irq_en); >> >> and this is for the version with the sdio problem >> >> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:50:32.956474080 +0100 >> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:57:27.185837225 +0100 >> @@ -493,6 +493,9 @@ static void meson_mmc_start_cmd(struct m >> } >> >> if (data) { >> + >> + dev_dbg(host->dev, "DBG data"); >> + >> cmd_cfg |= CMD_CFG_DATA_IO; >> >> if (data->blocks > 1) { >> @@ -549,6 +552,10 @@ static void meson_mmc_start_cmd(struct m >> host->cmd = cmd; >> >> wmb(); /* ensure descriptor is written before kicked */ >> + >> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >> + desc[0].cmd_cfg, desc[0].cmd_arg, desc[0].cmd_resp); >> + >> cfg = host->descs_dma_addr | START_DESC_BUSY; >> writel(cfg, host->regs + SD_EMMC_START); >> } >> @@ -610,6 +617,8 @@ static irqreturn_t meson_mmc_irq(int irq >> raw_status = readl(host->regs + SD_EMMC_STATUS); >> status = raw_status & irq_en; >> >> + dev_dbg(host->dev, "DBG status 0x%08x", status); >> + >> if (!status) { >> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >> raw_status, irq_en); >> >> the filtered logs are identical up and including the 2nd cmd53. >> >> Helmut >> >> > Thanks. Really appreciate your support. Meanwhile I think there must be a bug > either in the DMA subsystem or there's a hw bug causing issues with very small > transfers. That's the only difference between SD/eMMC and SDIO on that level: > SD/eMMC always transfers 512 byte blocks whilst SDIO also uses very small > transfers. > > For up to 4 bytes the chip supports an alternative transfer method. > Let's try this as workaround. > > Could you please apply: > patches 1, 2, 4 + the updated bigger patch I sent via mail + the following: > > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 4f9fafd3..cf9be13f 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -185,6 +185,12 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) > return NULL; > } > > +static bool meson_mmc_small_read(const struct mmc_data *data) > +{ > + return data && data->blocks <= 1 && data->blksz <= 4 && > + data->flags & MMC_DATA_READ; > +} > + > static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) > { > return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; > @@ -208,11 +214,22 @@ static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) > static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, > int err) > { > + struct meson_host *host = mmc_priv(mmc); > struct mmc_data *data = mrq->data; > > if (data && data->sg_count) > dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, > meson_mmc_get_data_dir(data)); > + > + if (meson_mmc_small_read(data)) { > + int cnt; > + > + dma_rmb(); > + cnt = sg_copy_from_buffer(data->sg, data->sg_len, > + &host->descs[0].cmd_data, data->blksz); > + if (cnt != data->blksz) > + dev_err(host->dev, "error copying to scatterlist\n"); > + } > } > > static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) > @@ -493,6 +510,8 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > } > > if (data) { > + bool small_read = meson_mmc_small_read(data); > + > cmd_cfg |= CMD_CFG_DATA_IO; > > if (data->blocks > 1) { > @@ -513,6 +532,14 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > } > } > > + /* > + * workaround for most likely hw bug > + * if up to 4 bytes receive them in the descriptor instead > + * of using dma_map_sg/dma_unmap_sg > + */ > + if (small_read) > + cmd_cfg |= CMD_CFG_DATA_NUM; > + > data->bytes_xfered = 0; > if (data->flags & MMC_DATA_WRITE) > cmd_cfg |= CMD_CFG_DATA_WR; > @@ -533,7 +560,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > desc[i].cmd_cfg |= CMD_CFG_NO_CMD; > desc[i].cmd_arg = cmd->arg; > desc[i].cmd_resp = 0; > - desc[i].cmd_data = sg_dma_address(sg); > + desc[i].cmd_data = small_read ? 0 : sg_dma_address(sg); > } > desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; > > Hallo Heiner, here is the result: [ 44.375027] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 [ 44.375034] mmc0: starting CMD53 arg 15000004 flags 000001b5 [ 44.375037] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 [ 44.375047] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 [ 44.375050] mmc0: 4 bytes transferred: 0 [ 44.375057] brcmfmac: brcmf_sdiod_regrl data:0x16044330 [ 44.375059] brcmfmac: F1 signature read @0x18000000=0x16044330 [ 44.375296] mmc0: starting CMD53 arg 15000004 flags 000001b5 [ 44.375299] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 [ 44.375309] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 [ 44.375311] mmc0: 4 bytes transferred: 0 [ 44.375323] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<< expected 0x16044330 [ 44.375327] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 [ 44.375330] brcmfmac: brcmf_chip_recognition: SB chip is not supported [ 44.375333] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! [ 44.375337] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed [ 44.375339] brcmfmac: brcmf_sdio_remove Enter the 1. cmd53 returned the correct data. the second one failed. 0x0 instead of 0x16044330 (the same value as in the 1. cmd53) Helmut