From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiner Kallweit <hkallweit1@gmail.com>
Subject: Re: WoL broken in r8169.c since kernel 4.19
Date: Sun, 13 Jan 2019 17:19:41 +0100
Message-ID: <04cbac76-e0c4-dc97-4a11-0dc7d85be276@gmail.com>
References: <20190112200831.GB20268@torres.zugschlus.de>
 <cb8d8da1-e485-9b62-8472-08ed2fa9b7cc@gmail.com>
 <20190113160149.GG20268@torres.zugschlus.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
To: Marc Haber <mh+netdev@zugschlus.de>
Return-path: <netdev-owner@vger.kernel.org>
Received: from mail-wm1-f47.google.com ([209.85.128.47]:53337 "EHLO
        mail-wm1-f47.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1726543AbfAMQTs (ORCPT
        <rfc822;netdev@vger.kernel.org>); Sun, 13 Jan 2019 11:19:48 -0500
Received: by mail-wm1-f47.google.com with SMTP id d15so6616083wmb.3
        for <netdev@vger.kernel.org>; Sun, 13 Jan 2019 08:19:47 -0800 (PST)
In-Reply-To: <20190113160149.GG20268@torres.zugschlus.de>
Content-Language: en-US
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

On 13.01.2019 17:01, Marc Haber wrote:
> On Sat, Jan 12, 2019 at 09:28:48PM +0100, Heiner Kallweit wrote:
>> On 12.01.2019 21:08, Marc Haber wrote:
>>> I am writing to all people who have commits in r8169.c between the v4.18
>>> and v4.19 tags in the Linux kernel. Please ignore as appropriate. If
>>> you'd prefer that to be on a mailing list, please indicate on which list
>>> you want to have that, and I'll resend.
>>>
>> It should be cc'ed to the netdev mailing list, as listed in MAINTAINERS.
> 
> I have bounced the original message there. Sorry for missing that, I was
> not aware that the MAINTAINERS file goes down on a single driver level.
> 
The netdev mailing list is used for everything in the network subsystem.

>>> My desktop copmuter has the following network interface:
>>>
>>>
>> Unfortunately there's different chip versions with the same description.
>> Please provide the result of "dmesg | grep XID".
> 
> [1/5004]mh@fan:~ $ dmesg | grep XID
> [    2.671004] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl, 54:04:a6:82:21:00, XID 2c900800, IRQ 29
> 
>>> I regularly buíld a VPN tunnel to my local network from 'on the road'
>>> and use WoL to wake up the desktop box when I need it.
>>>
>>> Since kernel 4.19, that does not work any more, the desktop remains
>>> suspended when I send it a magic packet. This still applies to 4.20.1,
>>> and it still works with any 4.18 kernel.
>>>
>> WoL works perfectly fine here with r8169 from runtime-suspend and
>> from S3. How do you enable WoL? And which WoL method do you use
>> (magic packet or ..) ?
> 
> I do enable WOL via systemd-networkd:
> [7/5009]mh@fan:~ $ cat /etc/systemd/network/10-lanc0.link
> [Match]
> MACAddress=54:04:a6:82:21:00
> 
> [Link]
> Name=lanc0
> WakeOnLan=magic
> 
> and I wake up the box by calling
> 
> sudo etherwake -i int182 54:04:a6:82:21:00
> 
> on the router. int182 is the interface name of the correct interface,
> this is proven correct by the fact that the box wakes up just fine with
> older version of the driver.
> 
>> Please provide a register dump (ethtool -d <if>).
> 
> The register dump is here (obtained with 4.20.1 with the r8169.c from
> 4.18):
> [5/5008]mh@fan:~ $ sudo ethtool -d lanc0
> RealTek RTL8168evl/8111evl registers:
> --------------------------------------------------------
> [..]
> 
> Greetings
> Marc
> 

I removed most people from To/Cc because I think for now they aren't needed
and our conversation would just bother them.

I assume you want to wake the system from S5 (poweroff).
Does is wake from S3 (suspend-to-RAM) ? You can trigger this with
"systemctl suspend".
Any difference if you enable WoL manually via ethtool "ethtool -s <if> wol g" ?

And a basic question: Once you have powered off your system, is network
LED on PC and router on?

Heiner