All of lore.kernel.org
 help / color / mirror / Atom feed
From: BALATON Zoltan <balaton@eik.bme.hu>
To: qemu-devel@nongnu.org
Cc: Huacai Chen <chenhuacai@kernel.org>, f4bug@amsat.org
Subject: [PATCH 07/12] vt82c686: Move creation of ISA devices to the ISA bridge
Date: Wed, 06 Jan 2021 22:13:58 +0100	[thread overview]
Message-ID: <057fa3b929d3436670ab8925cee51815653626d0.1609967638.git.balaton@eik.bme.hu> (raw)
In-Reply-To: <cover.1609967638.git.balaton@eik.bme.hu>

Currently the ISA devices that are part of the VIA south bridge,
superio chip are wired up by board code. Move creation of these ISA
devices to the VIA ISA bridge model so that board code does not need
to access ISA bus. This also allows vt82c686b-superio to be made
internal to vt82c686 which allows implementing its configuration via
registers in subseqent commits.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
 hw/isa/vt82c686.c   | 20 ++++++++++++++++++++
 hw/mips/fuloong2e.c | 29 +++++------------------------
 2 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index ead60310fe..3a45056226 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -16,6 +16,11 @@
 #include "hw/qdev-properties.h"
 #include "hw/isa/isa.h"
 #include "hw/isa/superio.h"
+#include "hw/intc/i8259.h"
+#include "hw/irq.h"
+#include "hw/dma/i8257.h"
+#include "hw/timer/i8254.h"
+#include "hw/rtc/mc146818rtc.h"
 #include "migration/vmstate.h"
 #include "hw/isa/apm.h"
 #include "hw/acpi/acpi.h"
@@ -307,9 +312,16 @@ OBJECT_DECLARE_SIMPLE_TYPE(VT82C686BISAState, VT82C686B_ISA)
 
 struct VT82C686BISAState {
     PCIDevice dev;
+    qemu_irq cpu_intr;
     SuperIOConfig superio_cfg;
 };
 
+static void via_isa_request_i8259_irq(void *opaque, int irq, int level)
+{
+    VT82C686BISAState *s = opaque;
+    qemu_set_irq(s->cpu_intr, level);
+}
+
 static void vt82c686b_write_config(PCIDevice *d, uint32_t addr,
                                    uint32_t val, int len)
 {
@@ -365,10 +377,18 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
     VT82C686BISAState *s = VT82C686B_ISA(d);
     DeviceState *dev = DEVICE(d);
     ISABus *isa_bus;
+    qemu_irq *isa_irq;
     int i;
 
+    qdev_init_gpio_out(dev, &s->cpu_intr, 1);
+    isa_irq = qemu_allocate_irqs(via_isa_request_i8259_irq, s, 1);
     isa_bus = isa_bus_new(dev, get_system_memory(), pci_address_space_io(d),
                           &error_fatal);
+    isa_bus_irqs(isa_bus, i8259_init(isa_bus, *isa_irq));
+    i8254_pit_init(isa_bus, 0x40, 0, NULL);
+    i8257_dma_init(isa_bus, 0);
+    isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
+    mc146818_rtc_init(isa_bus, 2000, NULL);
 
     for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
         if (i < PCI_COMMAND || i >= PCI_REVISION_ID) {
diff --git a/hw/mips/fuloong2e.c b/hw/mips/fuloong2e.c
index fbdd6122b3..0fc3288556 100644
--- a/hw/mips/fuloong2e.c
+++ b/hw/mips/fuloong2e.c
@@ -25,9 +25,6 @@
 #include "qapi/error.h"
 #include "cpu.h"
 #include "hw/clock.h"
-#include "hw/intc/i8259.h"
-#include "hw/dma/i8257.h"
-#include "hw/isa/superio.h"
 #include "net/net.h"
 #include "hw/boards.h"
 #include "hw/i2c/smbus_eeprom.h"
@@ -38,13 +35,13 @@
 #include "qemu/log.h"
 #include "hw/loader.h"
 #include "hw/ide/pci.h"
+#include "hw/qdev-properties.h"
 #include "elf.h"
 #include "hw/isa/vt82c686.h"
-#include "hw/rtc/mc146818rtc.h"
-#include "hw/timer/i8254.h"
 #include "exec/address-spaces.h"
 #include "sysemu/qtest.h"
 #include "sysemu/reset.h"
+#include "sysemu/sysemu.h"
 #include "qemu/error-report.h"
 
 #define ENVP_PADDR              0x2000
@@ -224,26 +221,13 @@ static void main_cpu_reset(void *opaque)
 }
 
 static void vt82c686b_southbridge_init(PCIBus *pci_bus, int slot, qemu_irq intc,
-                                       I2CBus **i2c_bus, ISABus **p_isa_bus)
+                                       I2CBus **i2c_bus)
 {
-    qemu_irq *i8259;
-    ISABus *isa_bus;
     PCIDevice *dev;
 
     dev = pci_create_simple_multifunction(pci_bus, PCI_DEVFN(slot, 0), true,
                                           TYPE_VT82C686B_ISA);
-    isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(dev), "isa.0"));
-    assert(isa_bus);
-    *p_isa_bus = isa_bus;
-    /* Interrupt controller */
-    /* The 8259 -> IP5  */
-    i8259 = i8259_init(isa_bus, intc);
-    isa_bus_irqs(isa_bus, i8259);
-    /* init other devices */
-    i8254_pit_init(isa_bus, 0x40, 0, NULL);
-    i8257_dma_init(isa_bus, 0);
-    /* Super I/O */
-    isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
+    qdev_connect_gpio_out(DEVICE(dev), 0, intc);
 
     dev = pci_create_simple(pci_bus, PCI_DEVFN(slot, 1), "via-ide");
     pci_ide_create_devs(dev);
@@ -290,7 +274,6 @@ static void mips_fuloong2e_init(MachineState *machine)
     uint64_t kernel_entry;
     PCIDevice *pci_dev;
     PCIBus *pci_bus;
-    ISABus *isa_bus;
     I2CBus *smbus;
     Clock *cpuclk;
     MIPSCPU *cpu;
@@ -357,7 +340,7 @@ static void mips_fuloong2e_init(MachineState *machine)
 
     /* South bridge -> IP5 */
     vt82c686b_southbridge_init(pci_bus, FULOONG2E_VIA_SLOT, env->irq[5],
-                               &smbus, &isa_bus);
+                               &smbus);
 
     /* GPU */
     if (vga_interface_type != VGA_NONE) {
@@ -372,8 +355,6 @@ static void mips_fuloong2e_init(MachineState *machine)
     spd_data = spd_data_generate(DDR, machine->ram_size);
     smbus_eeprom_init_one(smbus, 0x50, spd_data);
 
-    mc146818_rtc_init(isa_bus, 2000, NULL);
-
     /* Network card: RTL8139D */
     network_init(pci_bus);
 }
-- 
2.21.3



  reply	other threads:[~2021-01-06 21:35 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-06 21:13 [PATCH 00/12] vt82c686b clean ups and vt8231 emulation BALATON Zoltan
2021-01-06 21:13 ` BALATON Zoltan [this message]
2021-01-06 21:13 ` [PATCH 02/12] vt82c686: Reorganise code BALATON Zoltan
2021-01-07  8:07   ` Philippe Mathieu-Daudé
2021-01-07  9:47     ` BALATON Zoltan
2021-01-06 21:13 ` [PATCH 11/12] vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO BALATON Zoltan
2021-01-06 21:13 ` [PATCH 06/12] vt82c686: Simplify vt82c686b_realize() BALATON Zoltan
2021-01-07  8:11   ` Philippe Mathieu-Daudé
2021-01-06 21:13 ` [PATCH 10/12] vt82c686: QOM-ify superio related functionality BALATON Zoltan
2021-01-06 21:13 ` [PATCH 05/12] vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it BALATON Zoltan
2021-01-07  8:02   ` Philippe Mathieu-Daudé
2021-01-07 10:38     ` BALATON Zoltan
2021-01-07 10:56       ` Igor Mammedov
2021-01-07 19:57         ` BALATON Zoltan
2021-01-06 21:13 ` [PATCH 01/12] vt82c686: Move superio memory region to SuperIOConfig struct BALATON Zoltan
2021-01-06 21:13 ` [PATCH 09/12] vt82c686: Implement control of serial port io ranges via config regs BALATON Zoltan
2021-01-06 21:13 ` [PATCH 04/12] vt82c686: Fix up power management io base and config BALATON Zoltan
2021-01-06 21:13 ` [PATCH 08/12] vt82c686: Fix superio_cfg_{read,write}() functions BALATON Zoltan
2021-01-06 21:13 ` [PATCH 03/12] vt82c686: Fix SMBus IO base and configuration registers BALATON Zoltan
2021-01-06 21:13 ` [PATCH 12/12] vt82c686: Add emulation of VT8231 south bridge BALATON Zoltan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=057fa3b929d3436670ab8925cee51815653626d0.1609967638.git.balaton@eik.bme.hu \
    --to=balaton@eik.bme.hu \
    --cc=chenhuacai@kernel.org \
    --cc=f4bug@amsat.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.