From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from saturn.retrosnub.co.uk ([178.18.118.26]:58667 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754784AbcIJPyX (ORCPT ); Sat, 10 Sep 2016 11:54:23 -0400 Subject: Re: [PATCH v5] iio: potentiostat: add LMP91000 support To: Matt Ranostay , Peter Meerwald-Stadler References: <1473138655-15626-1-git-send-email-matt@ranostay.consulting> Cc: "linux-iio@vger.kernel.org" , Matt Ranostay From: Jonathan Cameron Message-ID: <058d70c3-107f-0c4c-fd3f-16729fa514fd@kernel.org> Date: Sat, 10 Sep 2016 16:54:21 +0100 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On 07/09/16 03:22, Matt Ranostay wrote: > On Tue, Sep 6, 2016 at 12:31 PM, Matt Ranostay wrote: >> On Tue, Sep 6, 2016 at 12:14 AM, Matt Ranostay wrote: >>> On Mon, Sep 5, 2016 at 10:43 PM, Peter Meerwald-Stadler >>> wrote: >>>> >>>>> Add support for the LMP91000 potentiostat which is used for chemical >>>>> sensing applications. >>>> >>>> minor comments below >>>> >>>>> Signed-off-by: Matt Ranostay >>>>> --- >>>>> >>>>> Changes from v1: >>>>> * Rename ti-adc1x1s.c driver to ti-adc161s626.c >>>>> * Switch from iio_channel_read() to using the industrialio-buffer-cb >>>>> interface >>>>> * Process data in ADC trigger handler for buffer callbacks >>>>> * Set the mux trigger to the ADC referenced by io-channels by default >>>>> >>>>> Changes from v2: >>>>> * Fix configuration index shifting values >>>>> * Switch from wait_for_completion_interruptible to wait_for_completion_timeout >>>>> >>>>> Changes from v3: >>>>> * Fix order of probe function error rollback >>>>> >>>>> Changes from v4: >>>>> * add iio_trigger_set_immutable() call >>>>> * move iio_channel_*_all_cb calls to *_buffer_preenable/postenable >>>>> >>>>> .../bindings/iio/potentiostat/lmp91000.txt | 30 ++ >>>>> drivers/iio/Kconfig | 1 + >>>>> drivers/iio/Makefile | 1 + >>>>> drivers/iio/potentiostat/Kconfig | 22 ++ >>>>> drivers/iio/potentiostat/Makefile | 6 + >>>>> drivers/iio/potentiostat/lmp91000.c | 397 +++++++++++++++++++++ >>>>> 6 files changed, 457 insertions(+) >>>>> create mode 100644 Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt >>>>> create mode 100644 drivers/iio/potentiostat/Kconfig >>>>> create mode 100644 drivers/iio/potentiostat/Makefile >>>>> create mode 100644 drivers/iio/potentiostat/lmp91000.c >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt >>>>> new file mode 100644 >>>>> index 000000000000..b9b621e94cd7 >>>>> --- /dev/null >>>>> +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt >>>>> @@ -0,0 +1,30 @@ >>>>> +* Texas Instruments LMP91000 potentiostat >>>>> + >>>>> +http://www.ti.com/lit/ds/symlink/lmp91000.pdf >>>>> + >>>>> +Required properties: >>>>> + >>>>> + - compatible: should be "ti,lmp91000" >>>>> + - reg: the I2C address of the device >>>>> + - io-channels: the phandle of the iio provider >>>>> + >>>>> + - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this >>>>> + needs to be set to signal that an external resistor value is being used. >>>>> + >>>>> +Optional properties: >>>>> + >>>>> + - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance >>>>> + amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms. >>>>> + >>>>> + - ti,rload-ohm: ohm value of the internal resistor load applied to the gas >>>>> + sensor. Must be 10, 33, 50, or 100 (default) ohms. >>>>> + >>>>> +Example: >>>>> + >>>>> +lmp91000@48 { >>>>> + compatible = "ti,lmp91000"; >>>>> + reg = <0x48>; >>>>> + ti,tia-gain-ohm = <7500>; >>>>> + ti,rload = <100>; >>>>> + io-channels = <&adc>; >>>>> +}; >>>>> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig >>>>> index 505e921f0b19..ad5bbaefc18e 100644 >>>>> --- a/drivers/iio/Kconfig >>>>> +++ b/drivers/iio/Kconfig >>>>> @@ -79,6 +79,7 @@ if IIO_TRIGGER >>>>> source "drivers/iio/trigger/Kconfig" >>>>> endif #IIO_TRIGGER >>>>> source "drivers/iio/potentiometer/Kconfig" >>>>> +source "drivers/iio/potentiostat/Kconfig" >>>>> source "drivers/iio/pressure/Kconfig" >>>>> source "drivers/iio/proximity/Kconfig" >>>>> source "drivers/iio/temperature/Kconfig" >>>>> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile >>>>> index 20f649073462..f7369b77ed94 100644 >>>>> --- a/drivers/iio/Makefile >>>>> +++ b/drivers/iio/Makefile >>>>> @@ -28,6 +28,7 @@ obj-y += light/ >>>>> obj-y += magnetometer/ >>>>> obj-y += orientation/ >>>>> obj-y += potentiometer/ >>>>> +obj-y += potentiostat/ >>>>> obj-y += pressure/ >>>>> obj-y += proximity/ >>>>> obj-y += temperature/ >>>>> diff --git a/drivers/iio/potentiostat/Kconfig b/drivers/iio/potentiostat/Kconfig >>>>> new file mode 100644 >>>>> index 000000000000..1e3baf2cc97d >>>>> --- /dev/null >>>>> +++ b/drivers/iio/potentiostat/Kconfig >>>>> @@ -0,0 +1,22 @@ >>>>> +# >>>>> +# Potentiostat drivers >>>>> +# >>>>> +# When adding new entries keep the list in alphabetical order >>>>> + >>>>> +menu "Digital potentiostats" >>>>> + >>>>> +config LMP91000 >>>>> + tristate "Texas Instruments LMP91000 potentiostat driver" >>>>> + depends on I2C >>>>> + select REGMAP_I2C >>>>> + select IIO_BUFFER >>>>> + select IIO_BUFFER_CB >>>>> + select IIO_TRIGGERED_BUFFER >>>>> + help >>>>> + Say yes here to build support for the Texas Instruments >>>>> + LMP91000 digital potentiostat chip. >>>>> + >>>>> + To compile this driver as a module, choose M here: the >>>>> + module will be called lmp91000 >>>>> + >>>>> +endmenu >>>>> diff --git a/drivers/iio/potentiostat/Makefile b/drivers/iio/potentiostat/Makefile >>>>> new file mode 100644 >>>>> index 000000000000..64d315ef4449 >>>>> --- /dev/null >>>>> +++ b/drivers/iio/potentiostat/Makefile >>>>> @@ -0,0 +1,6 @@ >>>>> +# >>>>> +# Makefile for industrial I/O potentiostat drivers >>>>> +# >>>>> + >>>>> +# When adding new entries keep the list in alphabetical order >>>>> +obj-$(CONFIG_LMP91000) += lmp91000.o >>>>> diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c >>>>> new file mode 100644 >>>>> index 000000000000..ec4394581039 >>>>> --- /dev/null >>>>> +++ b/drivers/iio/potentiostat/lmp91000.c >>>>> @@ -0,0 +1,397 @@ >>>>> +/* >>>>> + * lmp91000.c - Support for Texas Instruments digital potentiostats >>>>> + * >>>>> + * Copyright (C) 2016 Matt Ranostay >>>>> + * >>>>> + * This program is free software; you can redistribute it and/or modify >>>>> + * it under the terms of the GNU General Public License as published by >>>>> + * the Free Software Foundation; either version 2 of the License, or >>>>> + * (at your option) any later version. >>>>> + * >>>>> + * This program is distributed in the hope that it will be useful, >>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>>>> + * GNU General Public License for more details. >>>>> + * >>>>> + * TODO: bias voltage + polarity control, and multiple chip support >>>>> + */ >>>>> + >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> +#include >>>>> + >>>>> +#define LMP91000_REG_LOCK 0x01 >>>>> +#define LMP91000_REG_TIACN 0x10 >>>>> +#define LMP91000_REG_TIACN_GAIN_SHIFT 2 >>>>> + >>>>> +#define LMP91000_REG_REFCN 0x11 >>>>> +#define LMP91000_REG_REFCN_EXT_REF 0x20 >>>>> +#define LMP91000_REG_REFCN_50_ZERO 0x80 >>>>> + >>>>> +#define LMP91000_REG_MODECN 0x12 >>>>> +#define LMP91000_REG_MODECN_3LEAD 0x03 >>>>> +#define LMP91000_REG_MODECN_TEMP 0x07 >>>>> + >>>>> +#define LMP91000_DRV_NAME "lmp91000" >>>>> + >>>>> +static const int lmp91000_tia_gain[] = { 0, 2750, 3500, 7000, 14000, 35000, >>>>> + 120000, 350000 }; >>>>> + >>>>> +static const int lmp91000_rload[] = { 10, 33, 50, 100 }; >>>>> + >>>>> +static const struct regmap_config lmp91000_regmap_config = { >>>>> + .reg_bits = 8, >>>>> + .val_bits = 8, >>>>> +}; >>>>> + >>>>> +struct lmp91000_data { >>>>> + struct regmap *regmap; >>>>> + struct device *dev; >>>>> + >>>>> + struct iio_trigger *trig; >>>>> + struct iio_cb_buffer *cb_buffer; >>>>> + >>>>> + struct completion completion; >>>>> + u8 chan_select; >>>>> + >>>>> + u32 buffer[4]; /* 64-bit data + 64-bit timestamp */ >>>>> +}; >>>>> + >>>>> +static const struct iio_chan_spec lmp91000_channels[] = { >>>>> + { /* chemical channel mV */ >>>>> + .type = IIO_VOLTAGE, >>>>> + .channel = 0, >>>>> + .indexed = 1, >>>>> + .address = LMP91000_REG_MODECN_3LEAD, >>>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), >>>>> + .scan_index = 0, >>>>> + .scan_type = { >>>>> + .sign = 's', >>>>> + .realbits = 32, >>>>> + .storagebits = 32, >>>>> + }, >>>>> + }, >>>>> + IIO_CHAN_SOFT_TIMESTAMP(1), >>>>> + { /* temperature channel mV */ >>>>> + .type = IIO_VOLTAGE, >>>> >>>> why not IIO_TEMP? >>> >>> Because isn't linear enough. and scaling value wouldn't help... Thoughts? >> >> Actually second look in the datasheet it is mostly linear.. probably >> can add an offset and scaling value. >> > > Digging deeper into the datasheet -> > http://www.ti.com/lit/ds/symlink/lmp91000.pdf > > "Although the temperature sensor is very linear, its response does > have a slight downward parabolic shape. This shape is very accurately > reflected in Table 1. " > > So don't think we can really convert to IIO_TEMP since it isn't > completely linear scaling... Any thoughts on this? You aren't exposing it in the buffer so do it as IIO_CHAN_INFO_PROCESSED and do the magic in kernel. That's one of the main reasons we have that option there. We do this all the time in light sensors with nasty non linear (sometimes fusing multiple sensors) mappings to illuminance from the ADC readings. Jonathan > >> Thanks, >> >> Matt >> >>> >>>> >>>>> + .channel = 1, >>>>> + .indexed = 1, >>>>> + .address = LMP91000_REG_MODECN_TEMP, >>>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), >>>>> + .scan_index = -1, >>>>> + }, >>>>> +}; >>>>> + >>>>> +static int lmp91000_read(struct lmp91000_data *data, int channel, int *val) >>>>> +{ >>>>> + int state, ret; >>>>> + >>>>> + ret = regmap_read(data->regmap, LMP91000_REG_MODECN, &state); >>>>> + if (ret) >>>>> + return -EINVAL; >>>> >>>> simply return ret? >>> >>> No real reason. >>>> >>>>> + >>>>> + ret = regmap_write(data->regmap, LMP91000_REG_MODECN, channel); >>>>> + if (ret) >>>>> + return -EINVAL; >>>>> + >>>>> + /* delay till first temperature reading is complete */ >>>>> + if ((state != channel) && (channel == LMP91000_REG_MODECN_TEMP)) >>>>> + usleep_range(3000, 4000); >>>>> + >>>>> + data->chan_select = channel != LMP91000_REG_MODECN_3LEAD; >>>>> + >>>>> + iio_trigger_poll_chained(data->trig); >>>>> + >>>>> + ret = wait_for_completion_timeout(&data->completion, HZ); >>>>> + reinit_completion(&data->completion); >>>>> + >>>>> + if (!ret) >>>>> + return -ETIMEDOUT; >>>>> + >>>>> + *val = data->buffer[data->chan_select]; >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static irqreturn_t lmp91000_buffer_handler(int irq, void *private) >>>>> +{ >>>>> + struct iio_poll_func *pf = private; >>>>> + struct iio_dev *indio_dev = pf->indio_dev; >>>>> + struct lmp91000_data *data = iio_priv(indio_dev); >>>>> + int ret, val; >>>>> + >>>>> + memset(data->buffer, 0, sizeof(data->buffer)); >>>>> + >>>>> + ret = lmp91000_read(data, LMP91000_REG_MODECN_3LEAD, &val); >>>>> + if (!ret) { >>>>> + data->buffer[0] = val; >>>>> + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, >>>>> + iio_get_time_ns(indio_dev)); >>>>> + } >>>>> + >>>>> + iio_trigger_notify_done(indio_dev->trig); >>>>> + >>>>> + return IRQ_HANDLED; >>>>> +} >>>>> + >>>>> +static int lmp91000_read_raw(struct iio_dev *indio_dev, >>>>> + struct iio_chan_spec const *chan, >>>>> + int *val, int *val2, long mask) >>>>> +{ >>>>> + struct lmp91000_data *data = iio_priv(indio_dev); >>>>> + int ret; >>>>> + >>>>> + if (mask != IIO_CHAN_INFO_RAW) >>>>> + return -EINVAL; >>>>> + >>>>> + ret = iio_channel_start_all_cb(data->cb_buffer); >>>>> + if (ret) >>>>> + return ret; >>>>> + >>>>> + ret = lmp91000_read(data, chan->address, val); >>>>> + >>>>> + iio_channel_stop_all_cb(data->cb_buffer); >>>>> + >>>>> + if (!ret) >>>>> + return IIO_VAL_INT; >>>>> + >>>>> + return ret; >>>>> +} >>>>> + >>>>> +static const struct iio_info lmp91000_info = { >>>>> + .driver_module = THIS_MODULE, >>>>> + .read_raw = lmp91000_read_raw, >>>>> +}; >>>>> + >>>>> +static int lmp91000_read_config(struct lmp91000_data *data) >>>>> +{ >>>>> + struct device *dev = data->dev; >>>>> + struct device_node *np = dev->of_node; >>>>> + unsigned int reg, val; >>>>> + int i, ret; >>>>> + >>>>> + ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val); >>>>> + if (ret) { >>>>> + if (of_property_read_bool(np, "ti,external-tia-resistor")) >>>>> + val = 0; >>>>> + else { >>>>> + dev_err(dev, "no ti,tia-gain-ohm defined"); >>>>> + return ret; >>>>> + } >>>>> + } >>>>> + >>>>> + ret = -EINVAL; >>>> >>>> instead of fiddling with ret, one could check i >= >>>> ARRAY_SIZE(lmp91000_tia_gain) after the loop, matter of taste >>> >>> No issue with this. >>>> >>>>> + for (i = 0; i < ARRAY_SIZE(lmp91000_tia_gain); i++) { >>>>> + if (lmp91000_tia_gain[i] == val) { >>>>> + reg = i << LMP91000_REG_TIACN_GAIN_SHIFT; >>>>> + ret = 0; >>>>> + break; >>>>> + } >>>>> + } >>>>> + >>>>> + if (ret) { >>>>> + dev_err(dev, "invalid ti,tia-gain-ohm %d\n", val); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + ret = of_property_read_u32(np, "ti,rload-ohm", &val); >>>>> + if (ret) { >>>>> + val = 100; >>>>> + dev_info(dev, "no ti,rload-ohm defined, default to %d\n", val); >>>>> + } >>>>> + >>>>> + ret = -EINVAL; >>>>> + for (i = 0; i < ARRAY_SIZE(lmp91000_rload); i++) { >>>>> + if (lmp91000_rload[i] == val) { >>>>> + reg |= i; >>>>> + ret = 0; >>>>> + break; >>>>> + } >>>>> + } >>>>> + >>>>> + if (ret) { >>>>> + dev_err(dev, "invalid ti,rload-ohm %d\n", val); >>>>> + return ret; >>>>> + } >>>>> + >>>>> + regmap_write(data->regmap, LMP91000_REG_LOCK, 0); >>>>> + regmap_write(data->regmap, LMP91000_REG_TIACN, reg); >>>>> + regmap_write(data->regmap, LMP91000_REG_REFCN, LMP91000_REG_REFCN_EXT_REF >>>>> + | LMP91000_REG_REFCN_50_ZERO); >>>>> + regmap_write(data->regmap, LMP91000_REG_LOCK, 1); >>>> >>>> no retval checking >>> >>> Have no issues with this as well! >>>> >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static int lmp91000_buffer_cb(const void *val, void *private) >>>>> +{ >>>>> + struct iio_dev *indio_dev = private; >>>>> + struct lmp91000_data *data = iio_priv(indio_dev); >>>>> + >>>>> + data->buffer[data->chan_select] = *((int *)val); >>>>> + complete_all(&data->completion); >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static const struct iio_trigger_ops lmp91000_trigger_ops = { >>>>> + .owner = THIS_MODULE, >>>>> +}; >>>>> + >>>> >>>> drop newline >>>> >>>>> + >>>>> +static int lmp91000_buffer_preenable(struct iio_dev *indio_dev) >>>>> +{ >>>>> + struct lmp91000_data *data = iio_priv(indio_dev); >>>>> + >>>>> + return iio_channel_start_all_cb(data->cb_buffer); >>>>> +} >>>>> + >>>>> +static int lmp91000_buffer_predisable(struct iio_dev *indio_dev) >>>>> +{ >>>>> + struct lmp91000_data *data = iio_priv(indio_dev); >>>>> + >>>>> + iio_channel_stop_all_cb(data->cb_buffer); >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static const struct iio_buffer_setup_ops lmp91000_buffer_setup_ops = { >>>>> + .preenable = lmp91000_buffer_preenable, >>>>> + .postenable = iio_triggered_buffer_postenable, >>>>> + .predisable = lmp91000_buffer_predisable, >>>>> +}; >>>>> + >>>>> +static int lmp91000_probe(struct i2c_client *client, >>>>> + const struct i2c_device_id *id) >>>>> +{ >>>>> + struct device *dev = &client->dev; >>>>> + struct lmp91000_data *data; >>>>> + struct iio_dev *indio_dev; >>>>> + int ret; >>>>> + >>>>> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); >>>>> + if (!indio_dev) >>>>> + return -ENOMEM; >>>>> + >>>>> + indio_dev->info = &lmp91000_info; >>>>> + indio_dev->channels = lmp91000_channels; >>>>> + indio_dev->num_channels = ARRAY_SIZE(lmp91000_channels); >>>>> + indio_dev->name = LMP91000_DRV_NAME; >>>>> + indio_dev->modes = INDIO_DIRECT_MODE; >>>>> + i2c_set_clientdata(client, indio_dev); >>>>> + >>>>> + data = iio_priv(indio_dev); >>>>> + data->dev = dev; >>>>> + data->regmap = devm_regmap_init_i2c(client, &lmp91000_regmap_config); >>>>> + if (IS_ERR(data->regmap)) { >>>>> + dev_err(dev, "regmap initialization failed.\n"); >>>>> + return PTR_ERR(data->regmap); >>>>> + } >>>>> + >>>>> + data->trig = devm_iio_trigger_alloc(data->dev, "%s-mux%d", >>>>> + indio_dev->name, indio_dev->id); >>>>> + if (!data->trig) { >>>>> + dev_err(dev, "cannot allocate iio trigger.\n"); >>>>> + return -ENOMEM; >>>>> + } >>>>> + >>>>> + data->trig->ops = &lmp91000_trigger_ops; >>>>> + data->trig->dev.parent = dev; >>>>> + init_completion(&data->completion); >>>>> + >>>>> + ret = lmp91000_read_config(data); >>>>> + if (ret) >>>>> + return ret; >>>>> + >>>>> + ret = iio_triggered_buffer_setup(indio_dev, NULL, >>>>> + &lmp91000_buffer_handler, >>>>> + &lmp91000_buffer_setup_ops); >>>>> + if (ret) >>>>> + return ret; >>>>> + >>>>> + ret = iio_device_register(indio_dev); >>>>> + if (ret) >>>>> + goto error_unreg_buffer; >>>>> + >>>>> + data->cb_buffer = iio_channel_get_all_cb(dev, &lmp91000_buffer_cb, >>>>> + indio_dev); >>>>> + if (IS_ERR(data->cb_buffer)) { >>>>> + if (PTR_ERR(data->cb_buffer) == -ENODEV) >>>>> + ret = -EPROBE_DEFER; >>>>> + else >>>>> + ret = PTR_ERR(data->cb_buffer); >>>>> + >>>>> + goto error_unreg_device; >>>>> + } >>>>> + >>>>> + ret = iio_trigger_register(data->trig); >>>>> + if (ret) { >>>>> + dev_err(dev, "cannot register iio trigger.\n"); >>>>> + goto error_unreg_cb_buffer; >>>>> + } >>>>> + >>>>> + return iio_trigger_set_immutable(iio_channel_cb_get_iio_dev(data->cb_buffer), >>>>> + data->trig); >>>>> + >>>>> +error_unreg_cb_buffer: >>>>> + iio_channel_release_all_cb(data->cb_buffer); >>>>> + >>>>> +error_unreg_device: >>>>> + iio_device_unregister(indio_dev); >>>>> + >>>>> +error_unreg_buffer: >>>>> + iio_triggered_buffer_cleanup(indio_dev); >>>>> + >>>>> + return ret; >>>>> +} >>>>> + >>>>> +static int lmp91000_remove(struct i2c_client *client) >>>>> +{ >>>>> + struct iio_dev *indio_dev = i2c_get_clientdata(client); >>>>> + struct lmp91000_data *data = iio_priv(indio_dev); >>>>> + >>>>> + iio_device_unregister(indio_dev); >>>>> + >>>>> + iio_channel_stop_all_cb(data->cb_buffer); >>>>> + iio_channel_release_all_cb(data->cb_buffer); >>>>> + >>>>> + iio_triggered_buffer_cleanup(indio_dev); >>>>> + iio_trigger_unregister(data->trig); >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static const struct of_device_id lmp91000_of_match[] = { >>>>> + { .compatible = "ti,lmp91000", }, >>>>> + { }, >>>>> +}; >>>>> +MODULE_DEVICE_TABLE(of, lmp91000_of_match); >>>>> + >>>>> +static const struct i2c_device_id lmp91000_id[] = { >>>>> + { "lmp91000", 0 }, >>>>> + {} >>>>> +}; >>>>> +MODULE_DEVICE_TABLE(i2c, lmp91000_id); >>>>> + >>>>> +static struct i2c_driver lmp91000_driver = { >>>>> + .driver = { >>>>> + .name = LMP91000_DRV_NAME, >>>>> + .of_match_table = of_match_ptr(lmp91000_of_match), >>>>> + }, >>>>> + .probe = lmp91000_probe, >>>>> + .remove = lmp91000_remove, >>>>> + .id_table = lmp91000_id, >>>>> +}; >>>>> +module_i2c_driver(lmp91000_driver); >>>>> + >>>>> +MODULE_AUTHOR("Matt Ranostay "); >>>>> +MODULE_DESCRIPTION("LMP91000 digital potentiostat"); >>>>> +MODULE_LICENSE("GPL"); >>>>> >>>> >>>> -- >>>> >>>> Peter Meerwald-Stadler >>>> +43-664-2444418 (mobile)