From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 27 Feb 2018 09:36:42 +0100 Subject: [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board In-Reply-To: References: <1519293778-5185-1-git-send-email-karl.erik.larsson@gmail.com> <1519293778-5185-4-git-send-email-karl.erik.larsson@gmail.com> <20180223104331.GB6998@t450s.lan> Message-ID: <06002b0f-b4ec-f35b-79c6-2c9cfb016516@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 27-02-18 05:15, Erik Larsson wrote: > Hi Gary, > > 2018-02-23 11:43 GMT+01:00 Gary Bisson : >> Hi Erik, >> >> On Thu, Feb 22, 2018 at 11:02:58AM +0100, Erik Larsson wrote: >>> Signed-off-by: Erik Larsson >>> --- >>> .../common/imx/genimage.cfg.template_imx8 | 40 ++ >>> board/freescale/common/imx/post-image.sh | 10 +- >>> board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ >>> configs/freescale_imx8mqevk_defconfig | 37 ++ >> >> Why do we copy the defconfig in board folder although it present in the >> kernel tree directly? > The reason I add the kernel defconfig into the board folder is that > NXP removed all defconfigs and renamed the valid one to 'defconfig' in > the kernel. This makes it impossible (at least I think so) to use an > in tree defconfig. > > $ ls -l arch/arm64/configs/ > total 16 > -rw-r--r-- 1 erik erik 14337 dec 15 02:52 defconfig > > Copying it into the board folder was the best solution available. You should be able to use that in-tree defconfig with BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF