[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 90ae53ce1ae665a1b43ecf5ccafc339839392427:

  fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long (2017-08-22
08:20:02 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 63af4b0ad0666e0797306593813b6272e1995bde:

  i.MX6Q: icorem6: Add falcon mode (2017-08-30 12:18:41 +0200)

----------------------------------------------------------------
Anatolij Gustschin (3):
      imx: timer: don't clear the GPT control register multiple times
      spl: do not repeat timer init on i.MX6
      imx6: don't include unneeded boot_mode array in SPL

Breno Lima (1):
      imx: imx6: Move gpr_init() function to soc.c

Jagan Teki (3):
      icorem6: Fix to find MMC devices
      i.MX6Q: spl: Fix falcon to use dram_init_banksize
      i.MX6Q: icorem6: Add falcon mode

Peng Fan (3):
      imx: mx7: psci: add copyright and license
      pinctrl: imx: Fix mask when SHARE_MUX_CONF_REG is set
      pinctrl: imx7ulp: Add new info instance for iomuxc1

Stefan Agner (11):
      imx: move imximage header to common location
      usb: gadget: add SDP driver
      usb: gadget: sdp: extend images compatible for jumps
      cmd: add sdp command
      spl: add serial download protocol (SDP) support
      doc: add Serial Download Protocol documentation
      apalis/colibri_imx6: use independent USB PID for SPL
      apalis/colibri_imx6: enable SDP by default
      imx: fix USB boot mode detection for i.MX 6UL and 6ULL
      imx: use BOOT_DEVICE_BOARD instead of UART
      imx: remove SATA boot mode for i.MX 6UL and 6ULL

Stefano Babic (2):
      imx: fix licensing in i.MX files
      pfla02: Fix RAM detection and support 1 bank SOM

 arch/arm/include/asm/arch-mx35/mmc_host_def.h |  18 +---
 arch/arm/include/asm/arch-mx5/iomux-mx51.h    |   7 +-
 arch/arm/include/asm/arch-mxs/iomux-mx23.h    |   7 +-
 arch/arm/include/asm/arch-mxs/iomux-mx28.h    |   7 +-
 arch/arm/include/asm/mach-imx/sys_proto.h     |   9 +-
 arch/arm/mach-imx/mx6/soc.c                   |  19 ++++
 arch/arm/mach-imx/mx7/psci-mx7.c              |   7 ++
 arch/arm/mach-imx/mx7/psci.S                  |   7 ++
 arch/arm/mach-imx/spl.c                       |  20 +++-
 arch/arm/mach-imx/timer.c                     |   3 +-
 board/bachmann/ot1200/ot1200.c                |  11 --
 board/barco/platinum/platinum.h               |  11 --
 board/congatec/cgtqmx6eval/cgtqmx6eval.c      |  11 --
 board/el/el6x/el6x.c                          |  11 --
 board/engicam/common/spl.c                    |  22 ++--
 board/freescale/mx6sabreauto/mx6sabreauto.c   |  17 ---
 board/freescale/mx6sabresd/mx6sabresd.c       |  17 ---
 board/gateworks/gw_ventana/gw_ventana_spl.c   |  11 --
 board/kosagi/novena/novena_spl.c              |  11 --
 board/liebherr/mccmon6/spl.c                  |  11 --
 board/phytec/pcm058/pcm058.c                  |  12 ---
 board/phytec/pfla02/Kconfig                   |   6 ++
 board/phytec/pfla02/pfla02.c                  |  98 ++++++++++--------
 board/solidrun/mx6cuboxi/mx6cuboxi.c          |  11 --
 board/toradex/apalis_imx6/apalis_imx6.c       |  24 +++--
 board/toradex/colibri_imx6/colibri_imx6.c     |  24 +++--
 board/udoo/udoo_spl.c                         |  11 --
 board/wandboard/spl.c                         |  11 --
 cmd/Kconfig                                   |   7 ++
 cmd/Makefile                                  |   1 +
 cmd/usb_gadget_sdp.c                          |  50 +++++++++
 common/spl/Kconfig                            |   6 ++
 common/spl/Makefile                           |   1 +
 common/spl/spl.c                              |   2 +-
 common/spl/spl_sdp.c                          |  37 +++++++
 configs/apalis_imx6_defconfig                 |   4 +
 configs/colibri_imx6_defconfig                |   4 +
 configs/imx6qdl_icore_mmc_defconfig           |   2 +-
 configs/imx6qdl_icore_rqs_defconfig           |   1 -
 doc/README.sdp                                | 100 ++++++++++++++++++
 drivers/pinctrl/nxp/pinctrl-imx.c             |   2 +-
 drivers/pinctrl/nxp/pinctrl-imx7ulp.c         |  10 +-
 drivers/usb/gadget/Kconfig                    |   7 ++
 drivers/usb/gadget/Makefile                   |   2 +
 drivers/usb/gadget/f_sdp.c                    | 737
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/imx6-engicam.h                |  14 +++
 {tools => include}/imximage.h                 |   0
 include/sdp.h                                 |  16 +++
 48 files changed, 1156 insertions(+), 281 deletions(-)
 create mode 100644 cmd/usb_gadget_sdp.c
 create mode 100644 common/spl/spl_sdp.c
 create mode 100644 doc/README.sdp
 create mode 100644 drivers/usb/gadget/f_sdp.c
 rename {tools => include}/imximage.h (100%)
 create mode 100644 include/sdp.h


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================