From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?Q?=c5=81ukasz_Majewski?= Date: Sun, 1 Oct 2017 19:46:17 +0200 Subject: [U-Boot] fsl_esdhc driver is broken with DM In-Reply-To: References: <20171001144930.GG3503@bill-the-cat> Message-ID: <0836a995-4b0f-e0bb-5ef6-a4a8dd2d7105@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, > Hi Tom, > > On Sun, Oct 1, 2017 at 11:49 AM, Tom Rini wrote: > >>> Same regression is observed with mx7dsabresd board as well. >> >> It's likely to be all i.MX :( > > Only the i.MX configs with CONFIG_DM_MMC=y. Yes, I can confirm this. I'm using SPL + imx_usb (and boot to eMMC) on my imx6q boards and both work. However, I'm not using the DM for eMMC (# CONFIG_DM_MMC is not set). > >> Have all of the changes gone in such that an i.MX platform with SPL can >> be non-interactively booted via imx_usb? Not having my iMX platforms in >> automated testing means that I always end up not testing them nearly >> often enough. > > Yes, Stefan's patches have been been applied and are in mainline now. > > doc/README.sdp contains all the details to get imx_usb to load SPL + u-boot.img. > > However, the two platforms I saw the issue does not use SPL. > > Jagan, > > I noticed that some of your i.MX boards do select CONFIG_DM_MMC=y. > > Is MMC functional in U-Boot mainline on these targets? > > Thanks > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot > -- Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de