From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jaehoon Chung Date: Fri, 17 Jul 2020 09:31:25 +0900 Subject: [PATCH 0/9] mmc: fsl_esdhc: support eMMC HS200/HS400 modes In-Reply-To: <20200716022954.36774-1-yangbo.lu@nxp.com> References: <20200716022954.36774-1-yangbo.lu@nxp.com> Message-ID: <0842acf2-a497-8edb-6745-a440a6405dcc@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Yangbo, On 7/16/20 11:29 AM, Yangbo Lu wrote: > This patch-set is to support eMMC HS200 and HS400 speed modes for > eSDHC, and enable them on LX2160ARDB board. Is there any result about performance? Best Regards, Jaehoon Chung > > CI build link > https://travis-ci.org/github/yangbolu1991/u-boot-test/builds/708215558 > > Yangbo Lu (9): > mmc: add a reinit() API > mmc: fsl_esdhc: add a reinit() callback > mmc: fsl_esdhc: support tuning for eMMC HS200 > mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init > mmc: add a hs400_tuning flag > mmc: add a mmc_hs400_prepare_ddr() interface > mmc: fsl_esdhc: support eMMC HS400 mode > arm: dts: lx2160ardb: support eMMC HS400 mode > configs: lx2160ardb: enable eMMC HS400 mode support > > arch/arm/dts/fsl-lx2160a-rdb.dts | 2 + > configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 + > configs/lx2160ardb_tfa_defconfig | 1 + > configs/lx2160ardb_tfa_stmm_defconfig | 1 + > drivers/mmc/fsl_esdhc.c | 148 ++++++++++++++++++++++++++- > drivers/mmc/mmc-uclass.c | 30 ++++++ > drivers/mmc/mmc.c | 12 ++- > include/fsl_esdhc.h | 29 +++++- > include/mmc.h | 26 ++++- > 9 files changed, 240 insertions(+), 10 deletions(-) >