From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corey Minyard Subject: Re: [PATCH v2 1/3] ipmi: add an Aspeed BT IPMI BMC driver Date: Fri, 16 Sep 2016 14:41:37 -0500 Message-ID: <08e9b30f-6c35-8418-a8b0-0b63639dd36d@acm.org> References: <1474022367-21029-1-git-send-email-clg@kaod.org> <1474022367-21029-2-git-send-email-clg@kaod.org> Reply-To: minyard-HInyCGIudOg@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <1474022367-21029-2-git-send-email-clg-Bxea+6Xhats@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: =?UTF-8?Q?C=c3=a9dric_Le_Goater?= , openipmi-developer-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, Joel Stanley Cc: Alistair Popple , Rob Herring , Mark Rutland , Russell King , Arnd Bergmann , Jeremy Kerr , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Rocky Craig List-Id: devicetree@vger.kernel.org On 09/16/2016 05:39 AM, Cédric Le Goater wrote: > From: Alistair Popple > > This patch adds a simple device driver to expose the iBT interface on > Aspeed SOCs (AST2400 and AST2500) as a character device. Such SOCs are > commonly used as BMCs (BaseBoard Management Controllers) and this > driver implements the BMC side of the BT interface. > > The BT (Block Transfer) interface is used to perform in-band IPMI > communication between a host and its BMC. Entire messages are buffered > before sending a notification to the other end, host or BMC, that > there is data to be read. Usually, the host emits requests and the BMC > responses but the specification provides a mean for the BMC to send > SMS Attention (BMC-to-Host attention or System Management Software > attention) messages. > > For this purpose, the driver introduces a specific ioctl on the > device: 'BT_BMC_IOCTL_SMS_ATN' that can be used by the system running > on the BMC to signal the host of such an event. > > The device name defaults to '/dev/ipmi-bt-host' Others have reviewed this for style and such, and I have looked at it from a protocol point of view. it looks to be sound for the most part. I have some higher level concerns: There appears to be no handling for multiple simultaneous users. This interface can only be used by one task at a time, so you should probably only allow one opener. Well, I guess the BMC could be split into a reader and a writer task, so I'm not really sure about that, but I would think in most situations having more than one opener is a bug. You do call clr_b_busy() on open, for instance, which might be an issue for multiple openers. Maybe a module parameter for maximum number of openers? Just want to make sure this was thought about, at least. There is also no mutex protecting reading or writing. If multiple threads call read or write at the same time, it probably wouldn't work correctly. I think you need a read and a write mutex on the interface to protect against this. The spec says: The BMC must not return a given response once the corresponding Request-to-Response interval has passed. The BMC can ensure this by maintaining its own internal list of outstanding requests through the interface. The BMC could age and expire the entries in the list by expiring the entries at an interval that is somewhat shorter than the specified Request-to-Response interval.... On the write side, though, there doesn't seem to be a way to handle a situation where the host side doesn't respond for a while and the pending message would need to be discarded. The spec doesn't mention much about error recovery on this interface, but the way this is written should be fine, I think. I'm copying Rocky Craig, who wrote the host side driver for Linux, in case he wants to comment on this. This is easy to read and understand, so I think v3 should be good. Thanks, -corey > Signed-off-by: Alistair Popple > Signed-off-by: Jeremy Kerr > Signed-off-by: Joel Stanley > [clg: - checkpatch fixes > - added a devicetree binding documentation > - replace 'bt_host' by 'bt_bmc' to reflect that the driver is > the BMC side of the IPMI BT interface > - renamed the device to 'ipmi-bt-host' > - introduced a temporary buffer to copy_{to,from}_user > - used platform_get_irq() > - moved the driver under drivers/char/ipmi/ but kept it as a misc > device > - changed the compatible cell to "aspeed,ast2400-bt-bmc" > ] > Signed-off-by: Cédric Le Goater > --- > > Changes since v1: > > - replace 'bt_host' by 'bt_bmc' to reflect that the driver is > the BMC side of the IPMI BT interface > - renamed the device to 'ipmi-bt-host' > - introduced a temporary buffer to copy_{to,from}_user > - used platform_get_irq() > - moved the driver under drivers/char/ipmi/ but kept it as a misc > device > - changed the compatible cell to "aspeed,ast2400-bt-bmc" > > .../bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt | 23 + > drivers/Makefile | 2 +- > drivers/char/ipmi/Kconfig | 7 + > drivers/char/ipmi/Makefile | 1 + > drivers/char/ipmi/bt-bmc.c | 486 +++++++++++++++++++++ > include/uapi/linux/Kbuild | 1 + > include/uapi/linux/bt-bmc.h | 18 + > 7 files changed, 537 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt > create mode 100644 drivers/char/ipmi/bt-bmc.c > create mode 100644 include/uapi/linux/bt-bmc.h > > diff --git a/Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt > new file mode 100644 > index 000000000000..fbbacd958240 > --- /dev/null > +++ b/Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt > @@ -0,0 +1,23 @@ > +* Aspeed BT (Block Transfer) IPMI interface > + > +The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs > +(BaseBoard Management Controllers) and the BT interface can be used to > +perform in-band IPMI communication with their host. > + > +Required properties: > + > +- compatible : should be "aspeed,ast2400-bt-bmc" > +- reg: physical address and size of the registers > + > +Optional properties: > + > +- interrupts: interrupt generated by the BT interface. without an > + interrupt, the driver will operate in poll mode. > + > +Example: > + > + ibt@1e789140 { > + compatible = "aspeed,ast2400-bt-bmc"; > + reg = <0x1e789140 0x18>; > + interrupts = <8>; > + }; > diff --git a/drivers/Makefile b/drivers/Makefile > index 53abb4a5f736..5a9e7b6b7928 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -21,7 +21,7 @@ obj-y += video/ > obj-y += idle/ > > # IPMI must come before ACPI in order to provide IPMI opregion support > -obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/ > +obj-y += char/ipmi/ > > obj-$(CONFIG_ACPI) += acpi/ > obj-$(CONFIG_SFI) += sfi/ > diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig > index 5a9350b1069a..2c234e3e7513 100644 > --- a/drivers/char/ipmi/Kconfig > +++ b/drivers/char/ipmi/Kconfig > @@ -76,3 +76,10 @@ config IPMI_POWEROFF > the IPMI management controller is capable of this. > > endif # IPMI_HANDLER > + > +config ASPEED_BT_IPMI_BMC > + tristate "BT IPMI bmc driver" > + help > + Provides a driver for the BT (Block Transfer) IPMI interface > + found on Aspeed SOCs (AST2400 and AST2500). The driver > + implements the BMC side of the BT interface. > diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile > index f3ffde1f5f1f..0d98cd91def1 100644 > --- a/drivers/char/ipmi/Makefile > +++ b/drivers/char/ipmi/Makefile > @@ -11,3 +11,4 @@ obj-$(CONFIG_IPMI_SSIF) += ipmi_ssif.o > obj-$(CONFIG_IPMI_POWERNV) += ipmi_powernv.o > obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o > obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o > +obj-$(CONFIG_ASPEED_BT_IPMI_BMC) += bt-bmc.o > diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c > new file mode 100644 > index 000000000000..b96cb421e1c2 > --- /dev/null > +++ b/drivers/char/ipmi/bt-bmc.c > @@ -0,0 +1,486 @@ > +/* > + * Copyright (c) 2015-2016, IBM Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version > + * 2 of the License, or (at your option) any later version. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* > + * This is a BMC device used to communicate to the host > + */ > +#define DEVICE_NAME "ipmi-bt-host" > + > +#define BT_IO_BASE 0xe4 > +#define BT_IRQ 10 > + > +#define BT_CR0 0x0 > +#define BT_CR0_IO_BASE 16 > +#define BT_CR0_IRQ 12 > +#define BT_CR0_EN_CLR_SLV_RDP 0x8 > +#define BT_CR0_EN_CLR_SLV_WRP 0x4 > +#define BT_CR0_ENABLE_IBT 0x1 > +#define BT_CR1 0x4 > +#define BT_CR1_IRQ_H2B 0x01 > +#define BT_CR1_IRQ_HBUSY 0x40 > +#define BT_CR2 0x8 > +#define BT_CR2_IRQ_H2B 0x01 > +#define BT_CR2_IRQ_HBUSY 0x40 > +#define BT_CR3 0xc > +#define BT_CTRL 0x10 > +#define BT_CTRL_B_BUSY 0x80 > +#define BT_CTRL_H_BUSY 0x40 > +#define BT_CTRL_OEM0 0x20 > +#define BT_CTRL_SMS_ATN 0x10 > +#define BT_CTRL_B2H_ATN 0x08 > +#define BT_CTRL_H2B_ATN 0x04 > +#define BT_CTRL_CLR_RD_PTR 0x02 > +#define BT_CTRL_CLR_WR_PTR 0x01 > +#define BT_BMC2HOST 0x14 > +#define BT_INTMASK 0x18 > +#define BT_INTMASK_B2H_IRQEN 0x01 > +#define BT_INTMASK_B2H_IRQ 0x02 > +#define BT_INTMASK_BMC_HWRST 0x80 > + > +struct bt_bmc { > + struct device dev; > + struct miscdevice miscdev; > + void __iomem *base; > + int open_count; > + int irq; > + wait_queue_head_t queue; > + struct timer_list poll_timer; > +}; > + > +static u8 bt_inb(struct bt_bmc *bt_bmc, int reg) > +{ > + return ioread8(bt_bmc->base + reg); > +} > + > +static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg) > +{ > + iowrite8(data, bt_bmc->base + reg); > +} > + > +static void clr_rd_ptr(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL); > +} > + > +static void clr_wr_ptr(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL); > +} > + > +static void clr_h2b_atn(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_H2B_ATN, BT_CTRL); > +} > + > +static void set_b_busy(struct bt_bmc *bt_bmc) > +{ > + if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)) > + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); > +} > + > +static void clr_b_busy(struct bt_bmc *bt_bmc) > +{ > + if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY) > + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); > +} > + > +static void set_b2h_atn(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL); > +} > + > +static u8 bt_read(struct bt_bmc *bt_bmc) > +{ > + return bt_inb(bt_bmc, BT_BMC2HOST); > +} > + > +static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n) > +{ > + int i; > + > + for (i = 0; i < n; i++) > + buf[i] = bt_read(bt_bmc); > + return n; > +} > + > +static void bt_write(struct bt_bmc *bt_bmc, u8 c) > +{ > + bt_outb(bt_bmc, c, BT_BMC2HOST); > +} > + > +static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n) > +{ > + int i; > + > + for (i = 0; i < n; i++) > + bt_write(bt_bmc, buf[i]); > + return n; > +} > + > +static void set_sms_atn(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL); > +} > + > +static struct bt_bmc *file_bt_bmc(struct file *file) > +{ > + return container_of(file->private_data, struct bt_bmc, miscdev); > +} > + > +static int bt_bmc_open(struct inode *inode, struct file *file) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + > + clr_b_busy(bt_bmc); > + > + return 0; > +} > + > +#define BT_BMC_BUFFER_SIZE 256 > + > +/* > + * The BT (Block Transfer) interface means that entire messages are > + * buffered by the host before a notification is sent to the BMC that > + * there is data to be read. The first byte is the length and the > + * message data follows. The read operation just tries to capture the > + * whole before returning it to userspace. > + */ > +static ssize_t bt_bmc_read(struct file *file, char __user *buf, > + size_t count, loff_t *ppos) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + u8 len; > + int len_byte = 1; > + u8 kbuffer[BT_BMC_BUFFER_SIZE]; > + ssize_t ret = 0; > + ssize_t nread; > + > + if (!access_ok(VERIFY_WRITE, buf, count)) > + return -EFAULT; > + > + WARN_ON(*ppos); > + > + if (wait_event_interruptible(bt_bmc->queue, > + bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN)) > + return -ERESTARTSYS; > + > + set_b_busy(bt_bmc); > + clr_h2b_atn(bt_bmc); > + clr_rd_ptr(bt_bmc); > + > + /* > + * The BT frames start with the message length, which does not > + * include the length byte. > + */ > + kbuffer[0] = bt_read(bt_bmc); > + len = kbuffer[0]; > + > + /* We pass the length back to userspace as well */ > + if (len + 1 > count) > + len = count - 1; > + > + while (len) { > + nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte); > + > + bt_readn(bt_bmc, kbuffer + len_byte, nread); > + > + if (copy_to_user(buf, kbuffer, nread + len_byte)) { > + ret = -EFAULT; > + break; > + } > + len -= nread; > + buf += nread + len_byte; > + ret += nread + len_byte; > + len_byte = 0; > + } > + > + clr_b_busy(bt_bmc); > + > + return ret; > +} > + > +static ssize_t bt_bmc_write(struct file *file, const char __user *buf, > + size_t count, loff_t *ppos) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + u8 kbuffer[BT_BMC_BUFFER_SIZE]; > + ssize_t ret = 0; > + ssize_t nwritten; > + > + if (!access_ok(VERIFY_READ, buf, count)) > + return -EFAULT; > + > + WARN_ON(*ppos); > + > + /* There's no interrupt for clearing bmc busy so we have to > + * poll > + */ > + if (wait_event_interruptible(bt_bmc->queue, > + !(bt_inb(bt_bmc, BT_CTRL) & > + (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))) > + return -ERESTARTSYS; > + > + clr_wr_ptr(bt_bmc); > + > + while (count) { > + nwritten = min_t(ssize_t, count, sizeof(kbuffer)); > + if (copy_from_user(&kbuffer, buf, nwritten)) { > + ret = -EFAULT; > + break; > + } > + > + bt_writen(bt_bmc, kbuffer, nwritten); > + > + count -= nwritten; > + buf += nwritten; > + ret += nwritten; > + } > + > + set_b2h_atn(bt_bmc); > + > + return ret; > +} > + > +static long bt_bmc_ioctl(struct file *file, unsigned int cmd, > + unsigned long param) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + > + switch (cmd) { > + case BT_BMC_IOCTL_SMS_ATN: > + set_sms_atn(bt_bmc); > + return 0; > + } > + return -EINVAL; > +} > + > +static int bt_bmc_release(struct inode *inode, struct file *file) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + > + set_b_busy(bt_bmc); > + return 0; > +} > + > +static unsigned int bt_bmc_poll(struct file *file, poll_table *wait) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + unsigned int mask = 0; > + uint8_t ctrl; > + > + poll_wait(file, &bt_bmc->queue, wait); > + > + ctrl = bt_inb(bt_bmc, BT_CTRL); > + > + if (ctrl & BT_CTRL_H2B_ATN) > + mask |= POLLIN; > + > + if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) > + mask |= POLLOUT; > + > + return mask; > +} > + > +static const struct file_operations bt_bmc_fops = { > + .owner = THIS_MODULE, > + .open = bt_bmc_open, > + .read = bt_bmc_read, > + .write = bt_bmc_write, > + .release = bt_bmc_release, > + .poll = bt_bmc_poll, > + .unlocked_ioctl = bt_bmc_ioctl, > +}; > + > +static void poll_timer(unsigned long data) > +{ > + struct bt_bmc *bt_bmc = (void *)data; > + > + bt_bmc->poll_timer.expires += msecs_to_jiffies(500); > + wake_up(&bt_bmc->queue); > + add_timer(&bt_bmc->poll_timer); > +} > + > +static irqreturn_t bt_bmc_irq(int irq, void *arg) > +{ > + struct bt_bmc *bt_bmc = arg; > + uint32_t reg; > + > + reg = ioread32(bt_bmc->base + BT_CR2); > + reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY; > + if (!reg) > + return IRQ_NONE; > + > + /* ack pending IRQs */ > + iowrite32(reg, bt_bmc->base + BT_CR2); > + > + wake_up(&bt_bmc->queue); > + return IRQ_HANDLED; > +} > + > +static int bt_bmc_config_irq(struct bt_bmc *bt_bmc, > + struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + uint32_t reg; > + int rc; > + > + bt_bmc->irq = platform_get_irq(pdev, 0); > + if (!bt_bmc->irq) > + return -ENODEV; > + > + rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED, > + DEVICE_NAME, bt_bmc); > + if (rc < 0) { > + dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq); > + bt_bmc->irq = 0; > + return rc; > + } > + > + /* Configure IRQs on the bmc clearing the H2B and HBUSY bits; > + * H2B will be asserted when the bmc has data for us; HBUSY > + * will be cleared (along with B2H) when we can write the next > + * message to the BT buffer > + */ > + reg = ioread32(bt_bmc->base + BT_CR1); > + reg |= BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY; > + iowrite32(reg, bt_bmc->base + BT_CR1); > + > + return 0; > +} > + > +static int bt_bmc_probe(struct platform_device *pdev) > +{ > + struct bt_bmc *bt_bmc; > + struct device *dev; > + struct resource *res; > + int rc; > + > + if (!pdev || !pdev->dev.of_node) > + return -ENODEV; > + > + dev = &pdev->dev; > + dev_info(dev, "Found bt bmc device\n"); > + > + bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL); > + if (!bt_bmc) > + return -ENOMEM; > + > + dev_set_drvdata(&pdev->dev, bt_bmc); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(dev, "Unable to find resources\n"); > + rc = -ENXIO; > + goto out_free; > + } > + > + bt_bmc->base = devm_ioremap_resource(&pdev->dev, res); > + if (!bt_bmc->base) { > + rc = -ENOMEM; > + goto out_free; > + } > + > + init_waitqueue_head(&bt_bmc->queue); > + > + bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR, > + bt_bmc->miscdev.name = DEVICE_NAME, > + bt_bmc->miscdev.fops = &bt_bmc_fops, > + bt_bmc->miscdev.parent = dev; > + rc = misc_register(&bt_bmc->miscdev); > + if (rc) { > + dev_err(dev, "Unable to register device\n"); > + goto out_unmap; > + } > + > + bt_bmc_config_irq(bt_bmc, pdev); > + > + if (bt_bmc->irq) { > + dev_info(dev, "Using IRQ %d\n", bt_bmc->irq); > + } else { > + dev_info(dev, "No IRQ; using timer\n"); > + setup_timer(&bt_bmc->poll_timer, poll_timer, > + (unsigned long)bt_bmc); > + bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10); > + add_timer(&bt_bmc->poll_timer); > + } > + > + iowrite32((BT_IO_BASE << BT_CR0_IO_BASE) | > + (BT_IRQ << BT_CR0_IRQ) | > + BT_CR0_EN_CLR_SLV_RDP | > + BT_CR0_EN_CLR_SLV_WRP | > + BT_CR0_ENABLE_IBT, > + bt_bmc->base + BT_CR0); > + > + clr_b_busy(bt_bmc); > + > + return 0; > + > +out_unmap: > + devm_iounmap(&pdev->dev, bt_bmc->base); > + > +out_free: > + devm_kfree(dev, bt_bmc); > + return rc; > + > +} > + > +static int bt_bmc_remove(struct platform_device *pdev) > +{ > + struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev); > + > + misc_deregister(&bt_bmc->miscdev); > + if (!bt_bmc->irq) > + del_timer_sync(&bt_bmc->poll_timer); > + devm_iounmap(&pdev->dev, bt_bmc->base); > + devm_kfree(&pdev->dev, bt_bmc); > + bt_bmc = NULL; > + > + return 0; > +} > + > +static const struct of_device_id bt_bmc_match[] = { > + { .compatible = "aspeed,ast2400-bt-bmc" }, > + { }, > +}; > + > +static struct platform_driver bt_bmc_driver = { > + .driver = { > + .name = DEVICE_NAME, > + .of_match_table = bt_bmc_match, > + }, > + .probe = bt_bmc_probe, > + .remove = bt_bmc_remove, > +}; > + > +module_platform_driver(bt_bmc_driver); > + > +MODULE_DEVICE_TABLE(of, bt_bmc_match); > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Alistair Popple "); > +MODULE_DESCRIPTION("Linux device interface to the BT interface"); > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild > index 185f8ea2702f..17b12942c67d 100644 > --- a/include/uapi/linux/Kbuild > +++ b/include/uapi/linux/Kbuild > @@ -74,6 +74,7 @@ header-y += bpf_common.h > header-y += bpf.h > header-y += bpqether.h > header-y += bsg.h > +header-y += bt-bmc.h > header-y += btrfs.h > header-y += can.h > header-y += capability.h > diff --git a/include/uapi/linux/bt-bmc.h b/include/uapi/linux/bt-bmc.h > new file mode 100644 > index 000000000000..d9ec766a63d0 > --- /dev/null > +++ b/include/uapi/linux/bt-bmc.h > @@ -0,0 +1,18 @@ > +/* > + * Copyright (c) 2015-2016, IBM Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version > + * 2 of the License, or (at your option) any later version. > + */ > + > +#ifndef _UAPI_LINUX_BT_BMC_H > +#define _UAPI_LINUX_BT_BMC_H > + > +#include > + > +#define __BT_BMC_IOCTL_MAGIC 0xb1 > +#define BT_BMC_IOCTL_SMS_ATN _IO(__BT_BMC_IOCTL_MAGIC, 0x00) > + > +#endif /* _UAPI_LINUX_BT_BMC_H */ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: minyard@acm.org (Corey Minyard) Date: Fri, 16 Sep 2016 14:41:37 -0500 Subject: [PATCH v2 1/3] ipmi: add an Aspeed BT IPMI BMC driver In-Reply-To: <1474022367-21029-2-git-send-email-clg@kaod.org> References: <1474022367-21029-1-git-send-email-clg@kaod.org> <1474022367-21029-2-git-send-email-clg@kaod.org> Message-ID: <08e9b30f-6c35-8418-a8b0-0b63639dd36d@acm.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09/16/2016 05:39 AM, C?dric Le Goater wrote: > From: Alistair Popple > > This patch adds a simple device driver to expose the iBT interface on > Aspeed SOCs (AST2400 and AST2500) as a character device. Such SOCs are > commonly used as BMCs (BaseBoard Management Controllers) and this > driver implements the BMC side of the BT interface. > > The BT (Block Transfer) interface is used to perform in-band IPMI > communication between a host and its BMC. Entire messages are buffered > before sending a notification to the other end, host or BMC, that > there is data to be read. Usually, the host emits requests and the BMC > responses but the specification provides a mean for the BMC to send > SMS Attention (BMC-to-Host attention or System Management Software > attention) messages. > > For this purpose, the driver introduces a specific ioctl on the > device: 'BT_BMC_IOCTL_SMS_ATN' that can be used by the system running > on the BMC to signal the host of such an event. > > The device name defaults to '/dev/ipmi-bt-host' Others have reviewed this for style and such, and I have looked at it from a protocol point of view. it looks to be sound for the most part. I have some higher level concerns: There appears to be no handling for multiple simultaneous users. This interface can only be used by one task at a time, so you should probably only allow one opener. Well, I guess the BMC could be split into a reader and a writer task, so I'm not really sure about that, but I would think in most situations having more than one opener is a bug. You do call clr_b_busy() on open, for instance, which might be an issue for multiple openers. Maybe a module parameter for maximum number of openers? Just want to make sure this was thought about, at least. There is also no mutex protecting reading or writing. If multiple threads call read or write at the same time, it probably wouldn't work correctly. I think you need a read and a write mutex on the interface to protect against this. The spec says: The BMC must not return a given response once the corresponding Request-to-Response interval has passed. The BMC can ensure this by maintaining its own internal list of outstanding requests through the interface. The BMC could age and expire the entries in the list by expiring the entries at an interval that is somewhat shorter than the specified Request-to-Response interval.... On the write side, though, there doesn't seem to be a way to handle a situation where the host side doesn't respond for a while and the pending message would need to be discarded. The spec doesn't mention much about error recovery on this interface, but the way this is written should be fine, I think. I'm copying Rocky Craig, who wrote the host side driver for Linux, in case he wants to comment on this. This is easy to read and understand, so I think v3 should be good. Thanks, -corey > Signed-off-by: Alistair Popple > Signed-off-by: Jeremy Kerr > Signed-off-by: Joel Stanley > [clg: - checkpatch fixes > - added a devicetree binding documentation > - replace 'bt_host' by 'bt_bmc' to reflect that the driver is > the BMC side of the IPMI BT interface > - renamed the device to 'ipmi-bt-host' > - introduced a temporary buffer to copy_{to,from}_user > - used platform_get_irq() > - moved the driver under drivers/char/ipmi/ but kept it as a misc > device > - changed the compatible cell to "aspeed,ast2400-bt-bmc" > ] > Signed-off-by: C?dric Le Goater > --- > > Changes since v1: > > - replace 'bt_host' by 'bt_bmc' to reflect that the driver is > the BMC side of the IPMI BT interface > - renamed the device to 'ipmi-bt-host' > - introduced a temporary buffer to copy_{to,from}_user > - used platform_get_irq() > - moved the driver under drivers/char/ipmi/ but kept it as a misc > device > - changed the compatible cell to "aspeed,ast2400-bt-bmc" > > .../bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt | 23 + > drivers/Makefile | 2 +- > drivers/char/ipmi/Kconfig | 7 + > drivers/char/ipmi/Makefile | 1 + > drivers/char/ipmi/bt-bmc.c | 486 +++++++++++++++++++++ > include/uapi/linux/Kbuild | 1 + > include/uapi/linux/bt-bmc.h | 18 + > 7 files changed, 537 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt > create mode 100644 drivers/char/ipmi/bt-bmc.c > create mode 100644 include/uapi/linux/bt-bmc.h > > diff --git a/Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt > new file mode 100644 > index 000000000000..fbbacd958240 > --- /dev/null > +++ b/Documentation/devicetree/bindings/char/ipmi/aspeed,ast2400-bt-bmc.txt > @@ -0,0 +1,23 @@ > +* Aspeed BT (Block Transfer) IPMI interface > + > +The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs > +(BaseBoard Management Controllers) and the BT interface can be used to > +perform in-band IPMI communication with their host. > + > +Required properties: > + > +- compatible : should be "aspeed,ast2400-bt-bmc" > +- reg: physical address and size of the registers > + > +Optional properties: > + > +- interrupts: interrupt generated by the BT interface. without an > + interrupt, the driver will operate in poll mode. > + > +Example: > + > + ibt at 1e789140 { > + compatible = "aspeed,ast2400-bt-bmc"; > + reg = <0x1e789140 0x18>; > + interrupts = <8>; > + }; > diff --git a/drivers/Makefile b/drivers/Makefile > index 53abb4a5f736..5a9e7b6b7928 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -21,7 +21,7 @@ obj-y += video/ > obj-y += idle/ > > # IPMI must come before ACPI in order to provide IPMI opregion support > -obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/ > +obj-y += char/ipmi/ > > obj-$(CONFIG_ACPI) += acpi/ > obj-$(CONFIG_SFI) += sfi/ > diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig > index 5a9350b1069a..2c234e3e7513 100644 > --- a/drivers/char/ipmi/Kconfig > +++ b/drivers/char/ipmi/Kconfig > @@ -76,3 +76,10 @@ config IPMI_POWEROFF > the IPMI management controller is capable of this. > > endif # IPMI_HANDLER > + > +config ASPEED_BT_IPMI_BMC > + tristate "BT IPMI bmc driver" > + help > + Provides a driver for the BT (Block Transfer) IPMI interface > + found on Aspeed SOCs (AST2400 and AST2500). The driver > + implements the BMC side of the BT interface. > diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile > index f3ffde1f5f1f..0d98cd91def1 100644 > --- a/drivers/char/ipmi/Makefile > +++ b/drivers/char/ipmi/Makefile > @@ -11,3 +11,4 @@ obj-$(CONFIG_IPMI_SSIF) += ipmi_ssif.o > obj-$(CONFIG_IPMI_POWERNV) += ipmi_powernv.o > obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o > obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o > +obj-$(CONFIG_ASPEED_BT_IPMI_BMC) += bt-bmc.o > diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c > new file mode 100644 > index 000000000000..b96cb421e1c2 > --- /dev/null > +++ b/drivers/char/ipmi/bt-bmc.c > @@ -0,0 +1,486 @@ > +/* > + * Copyright (c) 2015-2016, IBM Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version > + * 2 of the License, or (at your option) any later version. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* > + * This is a BMC device used to communicate to the host > + */ > +#define DEVICE_NAME "ipmi-bt-host" > + > +#define BT_IO_BASE 0xe4 > +#define BT_IRQ 10 > + > +#define BT_CR0 0x0 > +#define BT_CR0_IO_BASE 16 > +#define BT_CR0_IRQ 12 > +#define BT_CR0_EN_CLR_SLV_RDP 0x8 > +#define BT_CR0_EN_CLR_SLV_WRP 0x4 > +#define BT_CR0_ENABLE_IBT 0x1 > +#define BT_CR1 0x4 > +#define BT_CR1_IRQ_H2B 0x01 > +#define BT_CR1_IRQ_HBUSY 0x40 > +#define BT_CR2 0x8 > +#define BT_CR2_IRQ_H2B 0x01 > +#define BT_CR2_IRQ_HBUSY 0x40 > +#define BT_CR3 0xc > +#define BT_CTRL 0x10 > +#define BT_CTRL_B_BUSY 0x80 > +#define BT_CTRL_H_BUSY 0x40 > +#define BT_CTRL_OEM0 0x20 > +#define BT_CTRL_SMS_ATN 0x10 > +#define BT_CTRL_B2H_ATN 0x08 > +#define BT_CTRL_H2B_ATN 0x04 > +#define BT_CTRL_CLR_RD_PTR 0x02 > +#define BT_CTRL_CLR_WR_PTR 0x01 > +#define BT_BMC2HOST 0x14 > +#define BT_INTMASK 0x18 > +#define BT_INTMASK_B2H_IRQEN 0x01 > +#define BT_INTMASK_B2H_IRQ 0x02 > +#define BT_INTMASK_BMC_HWRST 0x80 > + > +struct bt_bmc { > + struct device dev; > + struct miscdevice miscdev; > + void __iomem *base; > + int open_count; > + int irq; > + wait_queue_head_t queue; > + struct timer_list poll_timer; > +}; > + > +static u8 bt_inb(struct bt_bmc *bt_bmc, int reg) > +{ > + return ioread8(bt_bmc->base + reg); > +} > + > +static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg) > +{ > + iowrite8(data, bt_bmc->base + reg); > +} > + > +static void clr_rd_ptr(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL); > +} > + > +static void clr_wr_ptr(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL); > +} > + > +static void clr_h2b_atn(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_H2B_ATN, BT_CTRL); > +} > + > +static void set_b_busy(struct bt_bmc *bt_bmc) > +{ > + if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)) > + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); > +} > + > +static void clr_b_busy(struct bt_bmc *bt_bmc) > +{ > + if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY) > + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); > +} > + > +static void set_b2h_atn(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL); > +} > + > +static u8 bt_read(struct bt_bmc *bt_bmc) > +{ > + return bt_inb(bt_bmc, BT_BMC2HOST); > +} > + > +static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n) > +{ > + int i; > + > + for (i = 0; i < n; i++) > + buf[i] = bt_read(bt_bmc); > + return n; > +} > + > +static void bt_write(struct bt_bmc *bt_bmc, u8 c) > +{ > + bt_outb(bt_bmc, c, BT_BMC2HOST); > +} > + > +static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n) > +{ > + int i; > + > + for (i = 0; i < n; i++) > + bt_write(bt_bmc, buf[i]); > + return n; > +} > + > +static void set_sms_atn(struct bt_bmc *bt_bmc) > +{ > + bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL); > +} > + > +static struct bt_bmc *file_bt_bmc(struct file *file) > +{ > + return container_of(file->private_data, struct bt_bmc, miscdev); > +} > + > +static int bt_bmc_open(struct inode *inode, struct file *file) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + > + clr_b_busy(bt_bmc); > + > + return 0; > +} > + > +#define BT_BMC_BUFFER_SIZE 256 > + > +/* > + * The BT (Block Transfer) interface means that entire messages are > + * buffered by the host before a notification is sent to the BMC that > + * there is data to be read. The first byte is the length and the > + * message data follows. The read operation just tries to capture the > + * whole before returning it to userspace. > + */ > +static ssize_t bt_bmc_read(struct file *file, char __user *buf, > + size_t count, loff_t *ppos) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + u8 len; > + int len_byte = 1; > + u8 kbuffer[BT_BMC_BUFFER_SIZE]; > + ssize_t ret = 0; > + ssize_t nread; > + > + if (!access_ok(VERIFY_WRITE, buf, count)) > + return -EFAULT; > + > + WARN_ON(*ppos); > + > + if (wait_event_interruptible(bt_bmc->queue, > + bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN)) > + return -ERESTARTSYS; > + > + set_b_busy(bt_bmc); > + clr_h2b_atn(bt_bmc); > + clr_rd_ptr(bt_bmc); > + > + /* > + * The BT frames start with the message length, which does not > + * include the length byte. > + */ > + kbuffer[0] = bt_read(bt_bmc); > + len = kbuffer[0]; > + > + /* We pass the length back to userspace as well */ > + if (len + 1 > count) > + len = count - 1; > + > + while (len) { > + nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte); > + > + bt_readn(bt_bmc, kbuffer + len_byte, nread); > + > + if (copy_to_user(buf, kbuffer, nread + len_byte)) { > + ret = -EFAULT; > + break; > + } > + len -= nread; > + buf += nread + len_byte; > + ret += nread + len_byte; > + len_byte = 0; > + } > + > + clr_b_busy(bt_bmc); > + > + return ret; > +} > + > +static ssize_t bt_bmc_write(struct file *file, const char __user *buf, > + size_t count, loff_t *ppos) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + u8 kbuffer[BT_BMC_BUFFER_SIZE]; > + ssize_t ret = 0; > + ssize_t nwritten; > + > + if (!access_ok(VERIFY_READ, buf, count)) > + return -EFAULT; > + > + WARN_ON(*ppos); > + > + /* There's no interrupt for clearing bmc busy so we have to > + * poll > + */ > + if (wait_event_interruptible(bt_bmc->queue, > + !(bt_inb(bt_bmc, BT_CTRL) & > + (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))) > + return -ERESTARTSYS; > + > + clr_wr_ptr(bt_bmc); > + > + while (count) { > + nwritten = min_t(ssize_t, count, sizeof(kbuffer)); > + if (copy_from_user(&kbuffer, buf, nwritten)) { > + ret = -EFAULT; > + break; > + } > + > + bt_writen(bt_bmc, kbuffer, nwritten); > + > + count -= nwritten; > + buf += nwritten; > + ret += nwritten; > + } > + > + set_b2h_atn(bt_bmc); > + > + return ret; > +} > + > +static long bt_bmc_ioctl(struct file *file, unsigned int cmd, > + unsigned long param) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + > + switch (cmd) { > + case BT_BMC_IOCTL_SMS_ATN: > + set_sms_atn(bt_bmc); > + return 0; > + } > + return -EINVAL; > +} > + > +static int bt_bmc_release(struct inode *inode, struct file *file) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + > + set_b_busy(bt_bmc); > + return 0; > +} > + > +static unsigned int bt_bmc_poll(struct file *file, poll_table *wait) > +{ > + struct bt_bmc *bt_bmc = file_bt_bmc(file); > + unsigned int mask = 0; > + uint8_t ctrl; > + > + poll_wait(file, &bt_bmc->queue, wait); > + > + ctrl = bt_inb(bt_bmc, BT_CTRL); > + > + if (ctrl & BT_CTRL_H2B_ATN) > + mask |= POLLIN; > + > + if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) > + mask |= POLLOUT; > + > + return mask; > +} > + > +static const struct file_operations bt_bmc_fops = { > + .owner = THIS_MODULE, > + .open = bt_bmc_open, > + .read = bt_bmc_read, > + .write = bt_bmc_write, > + .release = bt_bmc_release, > + .poll = bt_bmc_poll, > + .unlocked_ioctl = bt_bmc_ioctl, > +}; > + > +static void poll_timer(unsigned long data) > +{ > + struct bt_bmc *bt_bmc = (void *)data; > + > + bt_bmc->poll_timer.expires += msecs_to_jiffies(500); > + wake_up(&bt_bmc->queue); > + add_timer(&bt_bmc->poll_timer); > +} > + > +static irqreturn_t bt_bmc_irq(int irq, void *arg) > +{ > + struct bt_bmc *bt_bmc = arg; > + uint32_t reg; > + > + reg = ioread32(bt_bmc->base + BT_CR2); > + reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY; > + if (!reg) > + return IRQ_NONE; > + > + /* ack pending IRQs */ > + iowrite32(reg, bt_bmc->base + BT_CR2); > + > + wake_up(&bt_bmc->queue); > + return IRQ_HANDLED; > +} > + > +static int bt_bmc_config_irq(struct bt_bmc *bt_bmc, > + struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + uint32_t reg; > + int rc; > + > + bt_bmc->irq = platform_get_irq(pdev, 0); > + if (!bt_bmc->irq) > + return -ENODEV; > + > + rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED, > + DEVICE_NAME, bt_bmc); > + if (rc < 0) { > + dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq); > + bt_bmc->irq = 0; > + return rc; > + } > + > + /* Configure IRQs on the bmc clearing the H2B and HBUSY bits; > + * H2B will be asserted when the bmc has data for us; HBUSY > + * will be cleared (along with B2H) when we can write the next > + * message to the BT buffer > + */ > + reg = ioread32(bt_bmc->base + BT_CR1); > + reg |= BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY; > + iowrite32(reg, bt_bmc->base + BT_CR1); > + > + return 0; > +} > + > +static int bt_bmc_probe(struct platform_device *pdev) > +{ > + struct bt_bmc *bt_bmc; > + struct device *dev; > + struct resource *res; > + int rc; > + > + if (!pdev || !pdev->dev.of_node) > + return -ENODEV; > + > + dev = &pdev->dev; > + dev_info(dev, "Found bt bmc device\n"); > + > + bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL); > + if (!bt_bmc) > + return -ENOMEM; > + > + dev_set_drvdata(&pdev->dev, bt_bmc); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(dev, "Unable to find resources\n"); > + rc = -ENXIO; > + goto out_free; > + } > + > + bt_bmc->base = devm_ioremap_resource(&pdev->dev, res); > + if (!bt_bmc->base) { > + rc = -ENOMEM; > + goto out_free; > + } > + > + init_waitqueue_head(&bt_bmc->queue); > + > + bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR, > + bt_bmc->miscdev.name = DEVICE_NAME, > + bt_bmc->miscdev.fops = &bt_bmc_fops, > + bt_bmc->miscdev.parent = dev; > + rc = misc_register(&bt_bmc->miscdev); > + if (rc) { > + dev_err(dev, "Unable to register device\n"); > + goto out_unmap; > + } > + > + bt_bmc_config_irq(bt_bmc, pdev); > + > + if (bt_bmc->irq) { > + dev_info(dev, "Using IRQ %d\n", bt_bmc->irq); > + } else { > + dev_info(dev, "No IRQ; using timer\n"); > + setup_timer(&bt_bmc->poll_timer, poll_timer, > + (unsigned long)bt_bmc); > + bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10); > + add_timer(&bt_bmc->poll_timer); > + } > + > + iowrite32((BT_IO_BASE << BT_CR0_IO_BASE) | > + (BT_IRQ << BT_CR0_IRQ) | > + BT_CR0_EN_CLR_SLV_RDP | > + BT_CR0_EN_CLR_SLV_WRP | > + BT_CR0_ENABLE_IBT, > + bt_bmc->base + BT_CR0); > + > + clr_b_busy(bt_bmc); > + > + return 0; > + > +out_unmap: > + devm_iounmap(&pdev->dev, bt_bmc->base); > + > +out_free: > + devm_kfree(dev, bt_bmc); > + return rc; > + > +} > + > +static int bt_bmc_remove(struct platform_device *pdev) > +{ > + struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev); > + > + misc_deregister(&bt_bmc->miscdev); > + if (!bt_bmc->irq) > + del_timer_sync(&bt_bmc->poll_timer); > + devm_iounmap(&pdev->dev, bt_bmc->base); > + devm_kfree(&pdev->dev, bt_bmc); > + bt_bmc = NULL; > + > + return 0; > +} > + > +static const struct of_device_id bt_bmc_match[] = { > + { .compatible = "aspeed,ast2400-bt-bmc" }, > + { }, > +}; > + > +static struct platform_driver bt_bmc_driver = { > + .driver = { > + .name = DEVICE_NAME, > + .of_match_table = bt_bmc_match, > + }, > + .probe = bt_bmc_probe, > + .remove = bt_bmc_remove, > +}; > + > +module_platform_driver(bt_bmc_driver); > + > +MODULE_DEVICE_TABLE(of, bt_bmc_match); > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Alistair Popple "); > +MODULE_DESCRIPTION("Linux device interface to the BT interface"); > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild > index 185f8ea2702f..17b12942c67d 100644 > --- a/include/uapi/linux/Kbuild > +++ b/include/uapi/linux/Kbuild > @@ -74,6 +74,7 @@ header-y += bpf_common.h > header-y += bpf.h > header-y += bpqether.h > header-y += bsg.h > +header-y += bt-bmc.h > header-y += btrfs.h > header-y += can.h > header-y += capability.h > diff --git a/include/uapi/linux/bt-bmc.h b/include/uapi/linux/bt-bmc.h > new file mode 100644 > index 000000000000..d9ec766a63d0 > --- /dev/null > +++ b/include/uapi/linux/bt-bmc.h > @@ -0,0 +1,18 @@ > +/* > + * Copyright (c) 2015-2016, IBM Corporation. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version > + * 2 of the License, or (at your option) any later version. > + */ > + > +#ifndef _UAPI_LINUX_BT_BMC_H > +#define _UAPI_LINUX_BT_BMC_H > + > +#include > + > +#define __BT_BMC_IOCTL_MAGIC 0xb1 > +#define BT_BMC_IOCTL_SMS_ATN _IO(__BT_BMC_IOCTL_MAGIC, 0x00) > + > +#endif /* _UAPI_LINUX_BT_BMC_H */