All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Chen, Peng" <pengchen@qca.qualcomm.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: "gustavo@padovan.org" <gustavo@padovan.org>,
	"linux-bluetooth@vger.kernel.org"
	<linux-bluetooth@vger.kernel.org>,
	"Waller, Carolyn" <carolyn@qca.qualcomm.com>,
	"Jeang, Daniel" <dyjeong@qca.qualcomm.com>,
	"Shanmugam Kamatchi, Bala" <bkamatch@qca.qualcomm.com>,
	"Yao, Costa" <cqyao@qca.qualcomm.com>,
	"Fan, Hong" <hongfan@qca.qualcomm.com>,
	"Balasubramanian, Senthil Kumar" <senthilb@qca.qualcomm.com>,
	"Wu, Frank" <fanwu@qca.qualcomm.com>
Subject: RE: [patch]Add Vendor/Device ID for AR3012
Date: Wed, 1 Aug 2012 01:49:15 +0000	[thread overview]
Message-ID: <0EC13EFF38B7C84DB595405A8233E35B099B2EF2@nasanexd01b.na.qualcomm.com> (raw)
In-Reply-To: <0EC13EFF38B7C84DB595405A8233E35B099B1C02@nasanexd01b.na.qualcomm.com>

Hi Hotmann,=0A=
=0A=
How about this patch? Is there any problem?=0A=
=0A=
=0A=
Best Regards=0A=
Peng=0A=
=0A=
________________________________________=0A=
From: Chen, Peng=0A=
Sent: Monday, July 23, 2012 2:25 PM=0A=
To: Marcel Holtmann=0A=
Cc: gustavo@padovan.org; linux-bluetooth@vger.kernel.org; Waller, Carolyn; =
Jeang, Daniel; Shanmugam Kamatchi, Bala; Yao, Costa; Fan, Hong; Balasubrama=
nian, Senthil Kumar; Wu, Frank=0A=
Subject: RE: [patch]Add Vendor/Device ID for AR3012=0A=
=0A=
Hi Holtmann,=0A=
=0A=
Sorry. I am not familiar with using git to send mail right now.=0A=
_________________________=0A=
=0A=
=0A=
>From a1653337899ad56b23b52c43824445b8f23a24fd Mon Sep 17 00:00:00 2001=0A=
From: Peng Chen <pengchen@qca.qualcomm.com>=0A=
Date: Mon, 23 Jul 2012 12:56:20 +0800=0A=
Subject: [PATCH]     Bluetooth: add support for atheros 0489:e057=0A=
=0A=
    Add support for the AR3012 chip found on Foxconn.=0A=
=0A=
    usb-devices shows:=0A=
=0A=
    T:  Bus=3D06 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 44 Spd=3D12 =
  MxCh=3D 0=0A=
    D:  Ver=3D 1.10 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D  =
1=0A=
    P:  Vendor=3D0489 ProdID=3De057 Rev=3D 0.02=0A=
    C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3De0 MxPwr=3D100mA=0A=
    I:* If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driv=
er=3Dbtusb=0A=
    E:  Ad=3D81(I) Atr=3D03(Int.) MxPS=3D  16 Ivl=3D1ms=0A=
    E:  Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D  64 Ivl=3D0ms=0A=
    E:  Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D  64 Ivl=3D0ms=0A=
    I:* If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driv=
er=3Dbtusb=0A=
    E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D   0 Ivl=3D1ms=0A=
    E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D   0 Ivl=3D1ms=0A=
    I:  If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driv=
er=3Dbtusb=0A=
    E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D   9 Ivl=3D1ms=0A=
    E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D   9 Ivl=3D1ms=0A=
    I:  If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driv=
er=3Dbtusb=0A=
    E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  17 Ivl=3D1ms=0A=
    E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  17 Ivl=3D1ms=0A=
    I:  If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driv=
er=3Dbtusb=0A=
    E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  25 Ivl=3D1ms=0A=
    E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  25 Ivl=3D1ms=0A=
    I:  If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driv=
er=3Dbtusb=0A=
    E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  33 Ivl=3D1ms=0A=
    E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  33 Ivl=3D1ms=0A=
    I:  If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driv=
er=3Dbtusb=0A=
    E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  49 Ivl=3D1ms=0A=
    E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  49 Ivl=3D1ms=0A=
=0A=
Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>=0A=
---=0A=
 drivers/bluetooth/ath3k.c |    2 ++=0A=
 drivers/bluetooth/btusb.c |    1 +=0A=
 2 files changed, 3 insertions(+)=0A=
=0A=
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c=0A=
index 10308cd..11f36e5 100644=0A=
--- a/drivers/bluetooth/ath3k.c=0A=
+++ b/drivers/bluetooth/ath3k.c=0A=
@@ -79,6 +79,7 @@ static struct usb_device_id ath3k_table[] =3D {=0A=
        { USB_DEVICE(0x13d3, 0x3362) },=0A=
        { USB_DEVICE(0x0CF3, 0xE004) },=0A=
        { USB_DEVICE(0x0930, 0x0219) },=0A=
+       { USB_DEVICE(0x0489, 0xe057) },=0A=
=0A=
        /* Atheros AR5BBU12 with sflash firmware */=0A=
        { USB_DEVICE(0x0489, 0xE02C) },=0A=
@@ -104,6 +105,7 @@ static struct usb_device_id ath3k_blist_tbl[] =3D {=0A=
        { USB_DEVICE(0x13d3, 0x3362), .driver_info =3D BTUSB_ATH3012 },=0A=
        { USB_DEVICE(0x0cf3, 0xe004), .driver_info =3D BTUSB_ATH3012 },=0A=
        { USB_DEVICE(0x0930, 0x0219), .driver_info =3D BTUSB_ATH3012 },=0A=
+       { USB_DEVICE(0x0489, 0xe057), .driver_info =3D BTUSB_ATH3012 },=0A=
=0A=
        /* Atheros AR5BBU22 with sflash firmware */=0A=
        { USB_DEVICE(0x0489, 0xE03C), .driver_info =3D BTUSB_ATH3012 },=0A=
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c=0A=
index e272214..4e007ac 100644=0A=
--- a/drivers/bluetooth/btusb.c=0A=
+++ b/drivers/bluetooth/btusb.c=0A=
@@ -133,6 +133,7 @@ static struct usb_device_id blacklist_table[] =3D {=0A=
        { USB_DEVICE(0x13d3, 0x3362), .driver_info =3D BTUSB_ATH3012 },=0A=
        { USB_DEVICE(0x0cf3, 0xe004), .driver_info =3D BTUSB_ATH3012 },=0A=
        { USB_DEVICE(0x0930, 0x0219), .driver_info =3D BTUSB_ATH3012 },=0A=
+       { USB_DEVICE(0x0489, 0xe057), .driver_info =3D BTUSB_ATH3012 },=0A=
=0A=
        /* Atheros AR5BBU12 with sflash firmware */=0A=
        { USB_DEVICE(0x0489, 0xe02c), .driver_info =3D BTUSB_IGNORE },=0A=
--=0A=
1.7.9.5=0A=
=0A=

  reply	other threads:[~2012-08-01  1:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-18  9:05 [patch]Add Vendor/Device ID for AR3012 Chen, Peng
2012-07-18 11:27 ` Marcel Holtmann
2012-07-23  6:25   ` Chen, Peng
2012-08-01  1:49     ` Chen, Peng [this message]
2012-08-01  1:52       ` Marcel Holtmann
2012-07-19  5:34 ` Bala Shanmugam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0EC13EFF38B7C84DB595405A8233E35B099B2EF2@nasanexd01b.na.qualcomm.com \
    --to=pengchen@qca.qualcomm.com \
    --cc=bkamatch@qca.qualcomm.com \
    --cc=carolyn@qca.qualcomm.com \
    --cc=cqyao@qca.qualcomm.com \
    --cc=dyjeong@qca.qualcomm.com \
    --cc=fanwu@qca.qualcomm.com \
    --cc=gustavo@padovan.org \
    --cc=hongfan@qca.qualcomm.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=senthilb@qca.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.