From: Markus Reichl <m.reichl@fivetechno.de>
To: Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>,
Linux Kernel <linux-kernel@vger.kernel.org>,
linux-rockchip@lists.infradead.org,
Markus Reichl <m.reichl@fivetechno.de>
Subject: [Bug ?] usb :typec :tcpm :fusb302
Date: Thu, 9 Jan 2020 17:29:07 +0100 [thread overview]
Message-ID: <0ac6bbe7-6395-526d-213c-ac58a19d8673@fivetechno.de> (raw)
Hi,
I'm working with a ROC-RK3399-PC arm64 board from firefly, circuit sheet [1].
The board is powered from an USB-C type connector via an FUSB302 PD controller.
With measured 15W+ power consumption it should use higher voltage PD modes than
the standard 5V USB-C mode.
When I add the related connector node in DTS [2] the FUSB302 initializes
the right PD mode (e.g. 15V/3A).
But during initialisation the PD is switched off shortly and the board has a blackout.
When I inject a backup supply voltage behind the FUSB302 (e.g. at SYS_12V line) during boot
I can remove the backup after succesfull setting up the PD and the board will run fine.
Is it possible to change the behaviour of the fusb302 driver to not power down the PD supply
during init?
In vendor kernel (4.4) this is done somehow but the sources are too different for me to find
out how.
Gruß,
--
Markus Reichl
[1]
http://download.t-firefly.com/product/RK3399/Docs/Hardware/%E5%8E%9F%E7%90%86%E5%9B%BE%E5%92%8C%E8%B4%B4%E7%89%87%E5%9B%BE/ROC-RK3399-PC/ROC-3399-PC-V10-A-20180804_%E5%8E%9F%E7%90%86%E5%9B%BE.pdf
[2]
https://lkml.org/lkml/2019/12/10/517
next reply other threads:[~2020-01-09 16:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 16:29 Markus Reichl [this message]
2020-01-20 11:58 ` [Bug ?] usb :typec :tcpm :fusb302 Heikki Krogerus
2020-01-20 14:01 ` Markus Reichl
2020-01-20 14:21 ` Guenter Roeck
2020-01-20 14:34 ` Markus Reichl
2020-01-20 14:34 ` Markus Reichl
2020-01-20 16:04 ` Guenter Roeck
2020-01-20 20:14 ` Markus Reichl
2020-01-20 20:26 ` Guenter Roeck
2020-01-20 21:02 ` Markus Reichl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0ac6bbe7-6395-526d-213c-ac58a19d8673@fivetechno.de \
--to=m.reichl@fivetechno.de \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=heiko@sntech.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.