All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Beulich <jbeulich@suse.com>
To: "xen-devel@lists.xenproject.org" <xen-devel@lists.xenproject.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
	George Dunlap <george.dunlap@citrix.com>,
	Julien Grall <julien@xen.org>,
	Stefano Stabellini <sstabellini@kernel.org>, Wei Liu <wl@xen.org>
Subject: [PATCH v2 2/2] memory: XENMEM_add_to_physmap (almost) wrapping checks
Date: Fri, 10 Dec 2021 10:40:38 +0100	[thread overview]
Message-ID: <0b68ff3a-3c82-f800-4d20-17eded13163a@suse.com> (raw)
In-Reply-To: <9725c93e-c227-f29f-07a4-65e383bb7858@suse.com>

Determining that behavior is correct (i.e. results in failure) for a
passed in GFN equaling INVALID_GFN is non-trivial. Make this quite a bit
more obvious by checking input in generic code - both for singular
requests to not match the value and for range ones to not pass / wrap
through it.

For Arm similarly make more obvious that no wrapping of MFNs passed
for XENMAPSPACE_dev_mmio and thus to map_dev_mmio_region() can occur:
Drop the "nr" parameter of the function to avoid future callers
appearing which might not themselves check for wrapping. Otherwise
the respective ASSERT() in rangeset_contains_range() could trigger.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v2: Add comment to BUILD_BUG_ON(). Avoid transiently #define-ing _gfn()
    (by way of new prereq patch).

--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -1479,7 +1479,7 @@ int xenmem_add_to_physmap_one(
         break;
     }
     case XENMAPSPACE_dev_mmio:
-        rc = map_dev_mmio_region(d, gfn, 1, _mfn(idx));
+        rc = map_dev_mmio_region(d, gfn, _mfn(idx));
         return rc;
 
     default:
--- a/xen/arch/arm/p2m.c
+++ b/xen/arch/arm/p2m.c
@@ -1357,19 +1357,18 @@ int unmap_mmio_regions(struct domain *d,
 
 int map_dev_mmio_region(struct domain *d,
                         gfn_t gfn,
-                        unsigned long nr,
                         mfn_t mfn)
 {
     int res;
 
-    if ( !(nr && iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + nr - 1)) )
+    if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn)) )
         return 0;
 
-    res = p2m_insert_mapping(d, gfn, nr, mfn, p2m_mmio_direct_c);
+    res = p2m_insert_mapping(d, gfn, 1, mfn, p2m_mmio_direct_c);
     if ( res < 0 )
     {
-        printk(XENLOG_G_ERR "Unable to map MFNs [%#"PRI_mfn" - %#"PRI_mfn" in Dom%d\n",
-               mfn_x(mfn), mfn_x(mfn) + nr - 1, d->domain_id);
+        printk(XENLOG_G_ERR "Unable to map MFN %#"PRI_mfn" in %pd\n",
+               mfn_x(mfn), d);
         return res;
     }
 
--- a/xen/common/grant_table.c
+++ b/xen/common/grant_table.c
@@ -4150,7 +4150,10 @@ int gnttab_map_frame(struct domain *d, u
     bool status = false;
 
     if ( gfn_eq(gfn, INVALID_GFN) )
+    {
+        ASSERT_UNREACHABLE();
         return -EINVAL;
+    }
 
     grant_write_lock(gt);
 
--- a/xen/common/memory.c
+++ b/xen/common/memory.c
@@ -832,6 +832,9 @@ int xenmem_add_to_physmap(struct domain
         return -EACCES;
     }
 
+    if ( gfn_eq(_gfn(xatp->gpfn), INVALID_GFN) )
+        return -EINVAL;
+
     if ( xatp->space == XENMAPSPACE_gmfn_foreign )
         extra.foreign_domid = DOMID_INVALID;
 
@@ -842,6 +845,18 @@ int xenmem_add_to_physmap(struct domain
     if ( xatp->size < start )
         return -EILSEQ;
 
+    if ( xatp->gpfn + xatp->size < xatp->gpfn ||
+         xatp->idx + xatp->size < xatp->idx )
+    {
+        /*
+         * Make sure INVALID_GFN is the highest representable value, i.e.
+         * guaranteeing that it won't fall in the middle of the
+         * [xatp->gpfn, xatp->gpfn + xatp->size) range checked above.
+         */
+        BUILD_BUG_ON(INVALID_GFN_RAW + 1);
+        return -EOVERFLOW;
+    }
+
     xatp->idx += start;
     xatp->gpfn += start;
     xatp->size -= start;
@@ -962,6 +977,9 @@ static int xenmem_add_to_physmap_batch(s
                                                extent, 1)) )
             return -EFAULT;
 
+        if ( gfn_eq(_gfn(gpfn), INVALID_GFN) )
+            return -EINVAL;
+
         rc = xenmem_add_to_physmap_one(d, xatpb->space, extra,
                                        idx, _gfn(gpfn));
 
--- a/xen/include/asm-arm/p2m.h
+++ b/xen/include/asm-arm/p2m.h
@@ -297,7 +297,6 @@ int unmap_regions_p2mt(struct domain *d,
 
 int map_dev_mmio_region(struct domain *d,
                         gfn_t gfn,
-                        unsigned long nr,
                         mfn_t mfn);
 
 int p2m_insert_mapping(struct domain *d, gfn_t start_gfn, unsigned long nr,



  parent reply	other threads:[~2021-12-10  9:40 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-10  9:38 [PATCH v2 0/2] grant table and add-to-physmap adjustments on top of XSAs 379 and 384 Jan Beulich
2021-12-10  9:39 ` [PATCH v2 1/2] mm: introduce INVALID_{G,M}FN_RAW Jan Beulich
2021-12-10  9:51   ` Oleksandr Andrushchenko
2021-12-17 14:46   ` Julien Grall
2021-12-10  9:40 ` Jan Beulich [this message]
2021-12-10 14:10   ` [PATCH v2 2/2] memory: XENMEM_add_to_physmap (almost) wrapping checks Oleksandr Andrushchenko
2021-12-13  7:28     ` Jan Beulich
2021-12-13 18:41       ` Stefano Stabellini
2022-01-27 14:53 ` [PATCH v3] " Jan Beulich
2022-01-31 18:30   ` Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0b68ff3a-3c82-f800-4d20-17eded13163a@suse.com \
    --to=jbeulich@suse.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=george.dunlap@citrix.com \
    --cc=julien@xen.org \
    --cc=sstabellini@kernel.org \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.