[PATCH 4.14 00/57] 4.14.215-rc1 review

[PATCH 4.14 00/57] 4.14.215-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.215 release.
There are 57 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.215-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.215-rc1

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86: fix shift out of bounds reported by UBSAN

Ying-Tsun Huang <ying-tsun.huang@amd.com>
    x86/mtrr: Correct the range check before performing MTRR type lookups

Florian Westphal <fw@strlen.de>
    netfilter: xt_RATEEST: reject non-null terminated string from userspace

Vasily Averin <vvs@virtuozzo.com>
    netfilter: ipset: fix shift-out-of-bounds in htable_bits()

Bard Liao <yung-chuan.liao@linux.intel.com>
    Revert "device property: Keep secondary firmware node secondary by type"

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Fix speaker volume control on Lenovo C940

bo liu <bo.liu@senarytech.com>
    ALSA: hda/conexant: add a new hda codec CX11970

Dan Williams <dan.j.williams@intel.com>
    x86/mm: Fix leak of pmd ptlock

Johan Hovold <johan@kernel.org>
    USB: serial: keyspan_pda: remove unused variable

Eddie Hung <eddie.hung@mediatek.com>
    usb: gadget: configfs: Fix use-after-free issue with udc_name

Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
    usb: gadget: configfs: Preserve function ordering after bind failure

Sriharsha Allenki <sallenki@codeaurora.org>
    usb: gadget: Fix spinlock lockup on usb_function_deactivate

Yang Yingliang <yangyingliang@huawei.com>
    USB: gadget: legacy: fix return error code in acm_ms_bind()

Zqiang <qiang.zhang@windriver.com>
    usb: gadget: function: printer: Fix a memory leak for interface descriptor

Jerome Brunet <jbrunet@baylibre.com>
    usb: gadget: f_uac2: reset wMaxPacketSize

Arnd Bergmann <arnd@arndb.de>
    usb: gadget: select CONFIG_CRC32

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks

Johan Hovold <johan@kernel.org>
    USB: usblp: fix DMA to stack

Johan Hovold <johan@kernel.org>
    USB: yurex: fix control-URB timeout handling

Bjørn Mork <bjorn@mork.no>
    USB: serial: option: add Quectel EM160R-GL

Daniel Palmer <daniel@0x0f.com>
    USB: serial: option: add LongSung M5710 module support

Johan Hovold <johan@kernel.org>
    USB: serial: iuu_phoenix: fix DMA from stack

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: uas: Add PNY USB Portable SSD to unusual_uas

Randy Dunlap <rdunlap@infradead.org>
    usb: usbip: vhci_hcd: protect shift size

Michael Grzeschik <m.grzeschik@pengutronix.de>
    USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set

Yu Kuai <yukuai3@huawei.com>
    usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion

Sean Young <sean@mess.org>
    USB: cdc-acm: blacklist another IR Droid device

taehyun.cho <taehyun.cho@samsung.com>
    usb: gadget: enable super speed plus

Ard Biesheuvel <ardb@kernel.org>
    crypto: ecdh - avoid buffer overflow in ecdh_set_secret()

Dexuan Cui <decui@microsoft.com>
    video: hyperv_fb: Fix the mmap() regression for v5.4.y and older

Florian Fainelli <f.fainelli@gmail.com>
    net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE

Stefan Chulski <stefanc@marvell.com>
    net: mvpp2: Fix GoP port 3 Networking Complex Control configurations

Antoine Tenart <atenart@kernel.org>
    net-sysfs: take the rtnl lock when accessing xps_cpus_map and num_tc

Randy Dunlap <rdunlap@infradead.org>
    net: sched: prevent invalid Scell_log shift count

Yunjian Wang <wangyunjian@huawei.com>
    vhost_net: fix ubuf refcount incorrectly when sendmsg fails

Bjørn Mork <bjorn@mork.no>
    net: usb: qmi_wwan: add Quectel EM160R-GL

Roland Dreier <roland@kernel.org>
    CDC-NCM: remove "connected" log message

Xie He <xie.he.0141@gmail.com>
    net: hdlc_ppp: Fix issues when mod_timer is called while timer is running

Yunjian Wang <wangyunjian@huawei.com>
    net: hns: fix return value check in __lb_other_process()

Guillaume Nault <gnault@redhat.com>
    ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()

Grygorii Strashko <grygorii.strashko@ti.com>
    net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registered

Antoine Tenart <atenart@kernel.org>
    net-sysfs: take the rtnl lock when storing xps_cpus

Dinghao Liu <dinghao.liu@zju.edu.cn>
    net: ethernet: Fix memleak in ethoc_probe

John Wang <wangzhiqiang.bj@bytedance.com>
    net/ncsi: Use real net-device for response handler

Petr Machata <me@pmachata.org>
    net: dcb: Validate netlink message in DCB handler

Jeff Dike <jdike@akamai.com>
    virtio_net: Fix recursive call to cpus_read_lock()

Manish Chopra <manishc@marvell.com>
    qede: fix offload for IPIP tunnel packets

Dan Carpenter <dan.carpenter@oracle.com>
    atm: idt77252: call pci_disable_device() on error path

Rasmus Villemoes <rasmus.villemoes@prevas.dk>
    ethernet: ucc_geth: set dev->max_mtu to 1518

Rasmus Villemoes <rasmus.villemoes@prevas.dk>
    ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()

Linus Torvalds <torvalds@linux-foundation.org>
    depmod: handle the case of /sbin/depmod without /sbin in PATH

Huang Shijie <sjhuang@iluvatar.ai>
    lib/genalloc: fix the overflow when size is too big

Bart Van Assche <bvanassche@acm.org>
    scsi: ide: Do not set the RQF_PREEMPT flag for sense requests

Adrian Hunter <adrian.hunter@intel.com>
    scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()

Yunfeng Ye <yeyunfeng@huawei.com>
    workqueue: Kick a worker based on the actual activation of delayed works

Dominique Martinet <asmadeus@codewreck.org>
    kbuild: don't hardcode depmod path


-------------

Diffstat:

 Makefile                                         |  6 +--
 arch/x86/kernel/cpu/mtrr/generic.c               |  6 +--
 arch/x86/kvm/mmu.h                               |  2 +-
 arch/x86/mm/pgtable.c                            |  2 +
 crypto/ecdh.c                                    |  3 +-
 drivers/atm/idt77252.c                           |  2 +-
 drivers/base/core.c                              |  2 +-
 drivers/ide/ide-atapi.c                          |  1 -
 drivers/ide/ide-io.c                             |  5 --
 drivers/net/ethernet/broadcom/bcmsysport.c       |  1 +
 drivers/net/ethernet/ethoc.c                     |  3 +-
 drivers/net/ethernet/freescale/ucc_geth.c        |  3 +-
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c |  4 ++
 drivers/net/ethernet/marvell/mvpp2.c             |  2 +-
 drivers/net/ethernet/qlogic/qede/qede_fp.c       |  5 ++
 drivers/net/ethernet/ti/cpts.c                   |  2 +
 drivers/net/usb/cdc_ncm.c                        |  3 --
 drivers/net/usb/qmi_wwan.c                       |  1 +
 drivers/net/virtio_net.c                         | 12 +++--
 drivers/net/wan/hdlc_ppp.c                       |  7 +++
 drivers/scsi/ufs/ufshcd-pci.c                    | 34 +++++++++++-
 drivers/usb/chipidea/ci_hdrc_imx.c               |  6 ++-
 drivers/usb/class/cdc-acm.c                      |  4 ++
 drivers/usb/class/usblp.c                        | 21 +++++++-
 drivers/usb/dwc3/core.h                          |  1 +
 drivers/usb/dwc3/ulpi.c                          |  2 +-
 drivers/usb/gadget/Kconfig                       |  2 +
 drivers/usb/gadget/composite.c                   | 10 +++-
 drivers/usb/gadget/configfs.c                    | 19 ++++---
 drivers/usb/gadget/function/f_printer.c          |  1 +
 drivers/usb/gadget/function/f_uac2.c             | 69 +++++++++++++++++++-----
 drivers/usb/gadget/legacy/acm_ms.c               |  4 +-
 drivers/usb/host/xhci.c                          | 24 ++++-----
 drivers/usb/misc/yurex.c                         |  3 ++
 drivers/usb/serial/iuu_phoenix.c                 | 20 +++++--
 drivers/usb/serial/keyspan_pda.c                 |  2 -
 drivers/usb/serial/option.c                      |  3 ++
 drivers/usb/storage/unusual_uas.h                |  7 +++
 drivers/usb/usbip/vhci_hcd.c                     |  2 +
 drivers/vhost/net.c                              |  6 +--
 drivers/video/fbdev/hyperv_fb.c                  |  6 +--
 include/net/red.h                                |  4 +-
 kernel/workqueue.c                               | 13 +++--
 lib/genalloc.c                                   | 25 ++++-----
 net/core/net-sysfs.c                             | 29 ++++++++--
 net/dcb/dcbnl.c                                  |  2 +
 net/ipv4/fib_frontend.c                          |  2 +-
 net/ncsi/ncsi-rsp.c                              |  2 +-
 net/netfilter/ipset/ip_set_hash_gen.h            | 20 ++-----
 net/netfilter/xt_RATEEST.c                       |  3 ++
 net/sched/sch_choke.c                            |  2 +-
 net/sched/sch_gred.c                             |  2 +-
 net/sched/sch_red.c                              |  2 +-
 net/sched/sch_sfq.c                              |  2 +-
 scripts/depmod.sh                                |  2 +
 sound/pci/hda/patch_conexant.c                   |  1 +
 sound/pci/hda/patch_realtek.c                    |  6 +++
 sound/usb/midi.c                                 |  4 ++
 58 files changed, 315 insertions(+), 124 deletions(-)

[PATCH 4.14 01/57] kbuild: dont hardcode depmod path

[Greg Kroah-Hartman]

From: Dominique Martinet <asmadeus@codewreck.org>

commit 436e980e2ed526832de822cbf13c317a458b78e1 upstream.

depmod is not guaranteed to be in /sbin, just let make look for
it in the path like all the other invoked programs

Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -382,7 +382,7 @@ OBJDUMP		= $(CROSS_COMPILE)objdump
 AWK		= awk
 GENKSYMS	= scripts/genksyms/genksyms
 INSTALLKERNEL  := installkernel
-DEPMOD		= /sbin/depmod
+DEPMOD		= depmod
 PERL		= perl
 PYTHON		= python
 CHECK		= sparse

[PATCH 4.14 02/57] workqueue: Kick a worker based on the actual activation of delayed works

[Greg Kroah-Hartman]

From: Yunfeng Ye <yeyunfeng@huawei.com>

[ Upstream commit 01341fbd0d8d4e717fc1231cdffe00343088ce0b ]

In realtime scenario, We do not want to have interference on the
isolated cpu cores. but when invoking alloc_workqueue() for percpu wq
on the housekeeping cpu, it kick a kworker on the isolated cpu.

  alloc_workqueue
    pwq_adjust_max_active
      wake_up_worker

The comment in pwq_adjust_max_active() said:
  "Need to kick a worker after thawed or an unbound wq's
   max_active is bumped"

So it is unnecessary to kick a kworker for percpu's wq when invoking
alloc_workqueue(). this patch only kick a worker based on the actual
activation of delayed works.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 18fae55713b0a..79fcec674485f 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3494,17 +3494,24 @@ static void pwq_adjust_max_active(struct pool_workqueue *pwq)
 	 * is updated and visible.
 	 */
 	if (!freezable || !workqueue_freezing) {
+		bool kick = false;
+
 		pwq->max_active = wq->saved_max_active;
 
 		while (!list_empty(&pwq->delayed_works) &&
-		       pwq->nr_active < pwq->max_active)
+		       pwq->nr_active < pwq->max_active) {
 			pwq_activate_first_delayed(pwq);
+			kick = true;
+		}
 
 		/*
 		 * Need to kick a worker after thawed or an unbound wq's
-		 * max_active is bumped.  It's a slow path.  Do it always.
+		 * max_active is bumped. In realtime scenarios, always kicking a
+		 * worker will cause interference on the isolated cpu cores, so
+		 * let's kick iff work items were activated.
 		 */
-		wake_up_worker(pwq->pool);
+		if (kick)
+			wake_up_worker(pwq->pool);
 	} else {
 		pwq->max_active = 0;
 	}
-- 
2.27.0

[PATCH 4.14 03/57] scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit af423534d2de86cd0db729a5ac41f056ca8717de ]

The expectation for suspend-to-disk is that devices will be powered-off, so
the UFS device should be put in PowerDown mode. If spm_lvl is not 5, then
that will not happen. Change the pm callbacks to force spm_lvl 5 for
suspend-to-disk poweroff.

Link: https://lore.kernel.org/r/20201207083120.26732-3-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd-pci.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index 925b0ec7ec54d..5253f089de4ee 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -97,6 +97,30 @@ static int ufshcd_pci_resume(struct device *dev)
 {
 	return ufshcd_system_resume(dev_get_drvdata(dev));
 }
+
+/**
+ * ufshcd_pci_poweroff - suspend-to-disk poweroff function
+ * @dev: pointer to PCI device handle
+ *
+ * Returns 0 if successful
+ * Returns non-zero otherwise
+ */
+static int ufshcd_pci_poweroff(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int spm_lvl = hba->spm_lvl;
+	int ret;
+
+	/*
+	 * For poweroff we need to set the UFS device to PowerDown mode.
+	 * Force spm_lvl to ensure that.
+	 */
+	hba->spm_lvl = 5;
+	ret = ufshcd_system_suspend(hba);
+	hba->spm_lvl = spm_lvl;
+	return ret;
+}
+
 #endif /* !CONFIG_PM_SLEEP */
 
 #ifdef CONFIG_PM
@@ -191,8 +215,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 }
 
 static const struct dev_pm_ops ufshcd_pci_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_pci_suspend,
-				ufshcd_pci_resume)
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= ufshcd_pci_suspend,
+	.resume		= ufshcd_pci_resume,
+	.freeze		= ufshcd_pci_suspend,
+	.thaw		= ufshcd_pci_resume,
+	.poweroff	= ufshcd_pci_poweroff,
+	.restore	= ufshcd_pci_resume,
+#endif
 	SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
 			   ufshcd_pci_runtime_resume,
 			   ufshcd_pci_runtime_idle)
-- 
2.27.0

[PATCH 4.14 04/57] scsi: ide: Do not set the RQF_PREEMPT flag for sense requests

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 96d86e6a80a3ab9aff81d12f9f1f2a0da2917d38 ]

RQF_PREEMPT is used for two different purposes in the legacy IDE code:

 1. To mark power management requests.

 2. To mark requests that should preempt another request. An (old)
    explanation of that feature is as follows: "The IDE driver in the Linux
    kernel normally uses a series of busywait delays during its
    initialization. When the driver executes these busywaits, the kernel
    does nothing for the duration of the wait. The time spent in these
    waits could be used for other initialization activities, if they could
    be run concurrently with these waits.

    More specifically, busywait-style delays such as udelay() in module
    init functions inhibit kernel preemption because the Big Kernel Lock is
    held, while yielding APIs such as schedule_timeout() allow
    preemption. This is true because the kernel handles the BKL specially
    and releases and reacquires it across reschedules allowed by the
    current thread.

    This IDE-preempt specification requires that the driver eliminate these
    busywaits and replace them with a mechanism that allows other work to
    proceed while the IDE driver is initializing."

Since I haven't found an implementation of (2), do not set the PREEMPT flag
for sense requests. This patch causes sense requests to be postponed while
a drive is suspended instead of being submitted to ide_queue_rq().

If it would ever be necessary to restore the IDE PREEMPT functionality,
that can be done by introducing a new flag in struct ide_request.

Link: https://lore.kernel.org/r/20201209052951.16136-4-bvanassche@acm.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ide/ide-atapi.c | 1 -
 drivers/ide/ide-io.c    | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 0e6bc631a1caf..215558c947def 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -213,7 +213,6 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
 	sense_rq->rq_disk = rq->rq_disk;
 	sense_rq->cmd_flags = REQ_OP_DRV_IN;
 	ide_req(sense_rq)->type = ATA_PRIV_SENSE;
-	sense_rq->rq_flags |= RQF_PREEMPT;
 
 	req->cmd[0] = GPCMD_REQUEST_SENSE;
 	req->cmd[4] = cmd_len;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 3a234701d92c4..7f34dc49c9b5f 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -531,11 +531,6 @@ repeat:
 		 * above to return us whatever is in the queue. Since we call
 		 * ide_do_request() ourselves, we end up taking requests while
 		 * the queue is blocked...
-		 * 
-		 * We let requests forced at head of queue with ide-preempt
-		 * though. I hope that doesn't happen too much, hopefully not
-		 * unless the subdriver triggers such a thing in its own PM
-		 * state machine.
 		 */
 		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
 		    ata_pm_request(rq) == 0 &&
-- 
2.27.0

[PATCH 4.14 05/57] lib/genalloc: fix the overflow when size is too big

[Greg Kroah-Hartman]

From: Huang Shijie <sjhuang@iluvatar.ai>

[ Upstream commit 36845663843fc59c5d794e3dc0641472e3e572da ]

Some graphic card has very big memory on chip, such as 32G bytes.

In the following case, it will cause overflow:

    pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
    ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);

    va = gen_pool_alloc(pool, SZ_4G);

The overflow occurs in gen_pool_alloc_algo_owner():

		....
		size = nbits << order;
		....

The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.

This patch converts some "int" to "unsigned long", and
changes the compare code in while.

Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/genalloc.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/lib/genalloc.c b/lib/genalloc.c
index 7e85d1e37a6ea..0b8ee173cf3a6 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -83,14 +83,14 @@ static int clear_bits_ll(unsigned long *addr, unsigned long mask_to_clear)
  * users set the same bit, one user will return remain bits, otherwise
  * return 0.
  */
-static int bitmap_set_ll(unsigned long *map, int start, int nr)
+static int bitmap_set_ll(unsigned long *map, unsigned long start, unsigned long nr)
 {
 	unsigned long *p = map + BIT_WORD(start);
-	const int size = start + nr;
+	const unsigned long size = start + nr;
 	int bits_to_set = BITS_PER_LONG - (start % BITS_PER_LONG);
 	unsigned long mask_to_set = BITMAP_FIRST_WORD_MASK(start);
 
-	while (nr - bits_to_set >= 0) {
+	while (nr >= bits_to_set) {
 		if (set_bits_ll(p, mask_to_set))
 			return nr;
 		nr -= bits_to_set;
@@ -118,14 +118,15 @@ static int bitmap_set_ll(unsigned long *map, int start, int nr)
  * users clear the same bit, one user will return remain bits,
  * otherwise return 0.
  */
-static int bitmap_clear_ll(unsigned long *map, int start, int nr)
+static unsigned long
+bitmap_clear_ll(unsigned long *map, unsigned long start, unsigned long nr)
 {
 	unsigned long *p = map + BIT_WORD(start);
-	const int size = start + nr;
+	const unsigned long size = start + nr;
 	int bits_to_clear = BITS_PER_LONG - (start % BITS_PER_LONG);
 	unsigned long mask_to_clear = BITMAP_FIRST_WORD_MASK(start);
 
-	while (nr - bits_to_clear >= 0) {
+	while (nr >= bits_to_clear) {
 		if (clear_bits_ll(p, mask_to_clear))
 			return nr;
 		nr -= bits_to_clear;
@@ -184,8 +185,8 @@ int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phy
 		 size_t size, int nid)
 {
 	struct gen_pool_chunk *chunk;
-	int nbits = size >> pool->min_alloc_order;
-	int nbytes = sizeof(struct gen_pool_chunk) +
+	unsigned long nbits = size >> pool->min_alloc_order;
+	unsigned long nbytes = sizeof(struct gen_pool_chunk) +
 				BITS_TO_LONGS(nbits) * sizeof(long);
 
 	chunk = vzalloc_node(nbytes, nid);
@@ -242,7 +243,7 @@ void gen_pool_destroy(struct gen_pool *pool)
 	struct list_head *_chunk, *_next_chunk;
 	struct gen_pool_chunk *chunk;
 	int order = pool->min_alloc_order;
-	int bit, end_bit;
+	unsigned long bit, end_bit;
 
 	list_for_each_safe(_chunk, _next_chunk, &pool->chunks) {
 		chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
@@ -293,7 +294,7 @@ unsigned long gen_pool_alloc_algo(struct gen_pool *pool, size_t size,
 	struct gen_pool_chunk *chunk;
 	unsigned long addr = 0;
 	int order = pool->min_alloc_order;
-	int nbits, start_bit, end_bit, remain;
+	unsigned long nbits, start_bit, end_bit, remain;
 
 #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG
 	BUG_ON(in_nmi());
@@ -376,7 +377,7 @@ void gen_pool_free(struct gen_pool *pool, unsigned long addr, size_t size)
 {
 	struct gen_pool_chunk *chunk;
 	int order = pool->min_alloc_order;
-	int start_bit, nbits, remain;
+	unsigned long start_bit, nbits, remain;
 
 #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG
 	BUG_ON(in_nmi());
@@ -638,7 +639,7 @@ unsigned long gen_pool_best_fit(unsigned long *map, unsigned long size,
 	index = bitmap_find_next_zero_area(map, size, start, nr, 0);
 
 	while (index < size) {
-		int next_bit = find_next_bit(map, size, index + nr);
+		unsigned long next_bit = find_next_bit(map, size, index + nr);
 		if ((next_bit - index) < len) {
 			len = next_bit - index;
 			start_bit = index;
-- 
2.27.0

[PATCH 4.14 06/57] depmod: handle the case of /sbin/depmod without /sbin in PATH

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit cedd1862be7e666be87ec824dabc6a2b05618f36 ]

Commit 436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).

Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.

Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/depmod.sh |    2 ++
 1 file changed, 2 insertions(+)

--- a/scripts/depmod.sh
+++ b/scripts/depmod.sh
@@ -15,6 +15,8 @@ if ! test -r System.map ; then
 	exit 0
 fi
 
+# legacy behavior: "depmod" in /sbin, no /sbin in PATH
+PATH="$PATH:/sbin"
 if [ -z $(command -v $DEPMOD) ]; then
 	echo "Warning: 'make modules_install' requires $DEPMOD. Please install it." >&2
 	echo "This is probably in the kmod package." >&2

[PATCH 4.14 07/57] ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()

[Greg Kroah-Hartman]

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

[ Upstream commit e925e0cd2a705aaacb0b907bb3691fcac3a973a4 ]

ugeth is the netdiv_priv() part of the netdevice. Accessing the memory
pointed to by ugeth (such as done by ucc_geth_memclean() and the two
of_node_puts) after free_netdev() is thus use-after-free.

Fixes: 80a9fad8e89a ("ucc_geth: fix module removal")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3939,12 +3939,12 @@ static int ucc_geth_remove(struct platfo
 	struct device_node *np = ofdev->dev.of_node;
 
 	unregister_netdev(dev);
-	free_netdev(dev);
 	ucc_geth_memclean(ugeth);
 	if (of_phy_is_fixed_link(np))
 		of_phy_deregister_fixed_link(np);
 	of_node_put(ugeth->ug_info->tbi_node);
 	of_node_put(ugeth->ug_info->phy_node);
+	free_netdev(dev);
 
 	return 0;
 }

[PATCH 4.14 08/57] ethernet: ucc_geth: set dev->max_mtu to 1518

[Greg Kroah-Hartman]

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

[ Upstream commit 1385ae5c30f238f81bc6528d897c6d7a0816783f ]

All the buffers and registers are already set up appropriately for an
MTU slightly above 1500, so we just need to expose this to the
networking stack. AFAICT, there's no need to implement .ndo_change_mtu
when the receive buffers are always set up to support the max_mtu.

This fixes several warnings during boot on our mpc8309-board with an
embedded mv88e6250 switch:

mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0
...
mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4
ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead

The last line explains what the DSA stack tries to do: achieving an MTU
of 1500 on-the-wire requires that the master netdevice connected to
the CPU port supports an MTU of 1500+the tagging overhead.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3894,6 +3894,7 @@ static int ucc_geth_probe(struct platfor
 	INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work);
 	netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, 64);
 	dev->mtu = 1500;
+	dev->max_mtu = 1518;
 
 	ugeth->msg_enable = netif_msg_init(debug.msg_enable, UGETH_MSG_DEFAULT);
 	ugeth->phy_interface = phy_interface;

[PATCH 4.14 09/57] atm: idt77252: call pci_disable_device() on error path

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8df66af5c1e5f80562fe728db5ec069b21810144 ]

This error path needs to disable the pci device before returning.

Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/atm/idt77252.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3608,7 +3608,7 @@ static int idt77252_init_one(struct pci_
 
 	if ((err = dma_set_mask_and_coherent(&pcidev->dev, DMA_BIT_MASK(32)))) {
 		printk("idt77252: can't enable DMA for PCI device at %s\n", pci_name(pcidev));
-		return err;
+		goto err_out_disable_pdev;
 	}
 
 	card = kzalloc(sizeof(struct idt77252_dev), GFP_KERNEL);

[PATCH 4.14 10/57] qede: fix offload for IPIP tunnel packets

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 5d5647dad259bb416fd5d3d87012760386d97530 ]

IPIP tunnels packets are unknown to device,
hence these packets are incorrectly parsed and
caused the packet corruption, so disable offlods
for such packets at run time.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qede/qede_fp.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -1708,6 +1708,11 @@ netdev_features_t qede_features_check(st
 			      ntohs(udp_hdr(skb)->dest) != gnv_port))
 				return features & ~(NETIF_F_CSUM_MASK |
 						    NETIF_F_GSO_MASK);
+		} else if (l4_proto == IPPROTO_IPIP) {
+			/* IPIP tunnels are unknown to the device or at least unsupported natively,
+			 * offloads for them can't be done trivially, so disable them for such skb.
+			 */
+			return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
 		}
 	}
 

[PATCH 4.14 11/57] virtio_net: Fix recursive call to cpus_read_lock()

[Greg Kroah-Hartman]

From: Jeff Dike <jdike@akamai.com>

[ Upstream commit de33212f768c5d9e2fe791b008cb26f92f0aa31c ]

virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS
and CONFIG_HOTPLUG are enabled.

The path is:
    virtnet_set_channels - calls get_online_cpus(), which is a trivial
wrapper around cpus_read_lock()
    netif_set_real_num_tx_queues
    netif_reset_xps_queues_gt
    netif_reset_xps_queues - calls cpus_read_lock()

This call chain and potential deadlock happens when the number of TX
queues is reduced.

This commit the removes netif_set_real_num_[tr]x_queues calls from
inside the get/put_online_cpus section, as they don't require that it
be held.

Fixes: 47be24796c13 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive")
Signed-off-by: Jeff Dike <jdike@akamai.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/virtio_net.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1788,14 +1788,16 @@ static int virtnet_set_channels(struct n
 
 	get_online_cpus();
 	err = _virtnet_set_queues(vi, queue_pairs);
-	if (!err) {
-		netif_set_real_num_tx_queues(dev, queue_pairs);
-		netif_set_real_num_rx_queues(dev, queue_pairs);
-
-		virtnet_set_affinity(vi);
+	if (err) {
+		put_online_cpus();
+		goto err;
 	}
+	virtnet_set_affinity(vi);
 	put_online_cpus();
 
+	netif_set_real_num_tx_queues(dev, queue_pairs);
+	netif_set_real_num_rx_queues(dev, queue_pairs);
+ err:
 	return err;
 }
 

[PATCH 4.14 12/57] net: dcb: Validate netlink message in DCB handler

[Greg Kroah-Hartman]

From: Petr Machata <me@pmachata.org>

[ Upstream commit 826f328e2b7e8854dd42ea44e6519cd75018e7b1 ]

DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB
messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have
the CAP_NET_ADMIN capability.

However, the operation to be performed is not decided from the DCB message
type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for
reading DCB objects, the corresponding SET and DEL commands are used for
manipulation.

The assumption is that set-like commands will be sent via an RTM_SETDCB
message, and get-like ones via RTM_GETDCB. However, this assumption is not
enforced.

It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN
capability by sending the corresponding command in an RTM_GETDCB message.
That is a bug. Fix it by validating the type of the request message against
the type used for the response.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Signed-off-by: Petr Machata <me@pmachata.org>
Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dcb/dcbnl.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -1727,6 +1727,8 @@ static int dcb_doit(struct sk_buff *skb,
 	fn = &reply_funcs[dcb->cmd];
 	if (!fn->cb)
 		return -EOPNOTSUPP;
+	if (fn->type != nlh->nlmsg_type)
+		return -EPERM;
 
 	if (!tb[DCB_ATTR_IFNAME])
 		return -EINVAL;

[PATCH 4.14 13/57] net/ncsi: Use real net-device for response handler

[Greg Kroah-Hartman]

From: John Wang <wangzhiqiang.bj@bytedance.com>

[ Upstream commit 427c940558560bff2583d07fc119a21094675982 ]

When aggregating ncsi interfaces and dedicated interfaces to bond
interfaces, the ncsi response handler will use the wrong net device to
find ncsi_dev, so that the ncsi interface will not work properly.
Here, we use the original net device to fix it.

Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler")
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Link: https://lore.kernel.org/r/20201223055523.2069-1-wangzhiqiang.bj@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ncsi/ncsi-rsp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -983,7 +983,7 @@ int ncsi_rcv_rsp(struct sk_buff *skb, st
 	int payload, i, ret;
 
 	/* Find the NCSI device */
-	nd = ncsi_find_dev(dev);
+	nd = ncsi_find_dev(orig_dev);
 	ndp = nd ? TO_NCSI_DEV_PRIV(nd) : NULL;
 	if (!ndp)
 		return -ENODEV;

[PATCH 4.14 14/57] net: ethernet: Fix memleak in ethoc_probe

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 5d41f9b7ee7a5a5138894f58846a4ffed601498a ]

When mdiobus_register() fails, priv->mdio allocated
by mdiobus_alloc() has not been freed, which leads
to memleak.

Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201223110615.31389-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ethoc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -1212,7 +1212,7 @@ static int ethoc_probe(struct platform_d
 	ret = mdiobus_register(priv->mdio);
 	if (ret) {
 		dev_err(&netdev->dev, "failed to register MDIO bus\n");
-		goto free2;
+		goto free3;
 	}
 
 	ret = ethoc_mdio_probe(netdev);
@@ -1244,6 +1244,7 @@ error2:
 	netif_napi_del(&priv->napi);
 error:
 	mdiobus_unregister(priv->mdio);
+free3:
 	mdiobus_free(priv->mdio);
 free2:
 	if (priv->clk)

[PATCH 4.14 15/57] net-sysfs: take the rtnl lock when storing xps_cpus

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit 1ad58225dba3f2f598d2c6daed4323f24547168f ]

Two race conditions can be triggered when storing xps cpus, resulting in
various oops and invalid memory accesses:

1. Calling netdev_set_num_tc while netif_set_xps_queue:

   - netif_set_xps_queue uses dev->tc_num as one of the parameters to
     compute the size of new_dev_maps when allocating it. dev->tc_num is
     also used to access the map, and the compiler may generate code to
     retrieve this field multiple times in the function.

   - netdev_set_num_tc sets dev->tc_num.

   If new_dev_maps is allocated using dev->tc_num and then dev->tc_num
   is set to a higher value through netdev_set_num_tc, later accesses to
   new_dev_maps in netif_set_xps_queue could lead to accessing memory
   outside of new_dev_maps; triggering an oops.

2. Calling netif_set_xps_queue while netdev_set_num_tc is running:

   2.1. netdev_set_num_tc starts by resetting the xps queues,
        dev->tc_num isn't updated yet.

   2.2. netif_set_xps_queue is called, setting up the map with the
        *old* dev->num_tc.

   2.3. netdev_set_num_tc updates dev->tc_num.

   2.4. Later accesses to the map lead to out of bound accesses and
        oops.

   A similar issue can be found with netdev_reset_tc.

One way of triggering this is to set an iface up (for which the driver
uses netdev_set_num_tc in the open path, such as bnx2x) and writing to
xps_cpus in a concurrent thread. With the right timing an oops is
triggered.

Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc
and netdev_reset_tc should be mutually exclusive. We do that by taking
the rtnl lock in xps_cpus_store.

Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1273,7 +1273,13 @@ static ssize_t xps_cpus_store(struct net
 		return err;
 	}
 
+	if (!rtnl_trylock()) {
+		free_cpumask_var(mask);
+		return restart_syscall();
+	}
+
 	err = netif_set_xps_queue(dev, mask, index);
+	rtnl_unlock();
 
 	free_cpumask_var(mask);
 

[PATCH 4.14 16/57] net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registered

[Greg Kroah-Hartman]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 4614792eebcbf81c60ad3604c1aeeb2b0899cea4 ]

The CPTS driver registers PTP PHC clock when first netif is going up and
unregister it when all netif are down. Now ethtool will show:
 - PTP PHC clock index 0 after boot until first netif is up;
 - the last assigned PTP PHC clock index even if PTP PHC clock is not
registered any more after all netifs are down.

This patch ensures that -1 is returned by ethtool when PTP PHC clock is not
registered any more.

Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20201224162405.28032-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ti/cpts.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -471,6 +471,7 @@ void cpts_unregister(struct cpts *cpts)
 
 	ptp_clock_unregister(cpts->clock);
 	cpts->clock = NULL;
+	cpts->phc_index = -1;
 
 	cpts_write32(cpts, 0, int_enable);
 	cpts_write32(cpts, 0, control);
@@ -572,6 +573,7 @@ struct cpts *cpts_create(struct device *
 	cpts->cc.read = cpts_systim_read;
 	cpts->cc.mask = CLOCKSOURCE_MASK(32);
 	cpts->info = cpts_info;
+	cpts->phc_index = -1;
 
 	cpts_calc_mult_shift(cpts);
 	/* save cc.mult original value as it can be modified

[PATCH 4.14 17/57] ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()

[Greg Kroah-Hartman]

From: Guillaume Nault <gnault@redhat.com>

[ Upstream commit 21fdca22eb7df2a1e194b8adb812ce370748b733 ]

RT_TOS() only clears one of the ECN bits. Therefore, when
fib_compute_spec_dst() resorts to a fib lookup, it can return
different results depending on the value of the second ECN bit.

For example, ECT(0) and ECT(1) packets could be treated differently.

  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up

  $ ip -netns ns0 address add 192.0.2.10/24 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/24 dev veth10

  $ ip -netns ns1 address add 192.0.2.21/32 dev lo
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 src 192.0.2.21
  $ ip netns exec ns1 sysctl -wq net.ipv4.icmp_echo_ignore_broadcasts=0

With TOS 4 and ECT(1), ns1 replies using source address 192.0.2.21
(ping uses -Q to set all TOS and ECN bits):

  $ ip netns exec ns0 ping -c 1 -b -Q 5 192.0.2.255
  [...]
  64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.544 ms

But with TOS 4 and ECT(0), ns1 replies using source address 192.0.2.11
because the "tos 4" route isn't matched:

  $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
  [...]
  64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.597 ms

After this patch the ECN bits don't affect the result anymore:

  $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
  [...]
  64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.591 ms

Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/fib_frontend.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -292,7 +292,7 @@ __be32 fib_compute_spec_dst(struct sk_bu
 			.flowi4_iif = LOOPBACK_IFINDEX,
 			.flowi4_oif = l3mdev_master_ifindex_rcu(dev),
 			.daddr = ip_hdr(skb)->saddr,
-			.flowi4_tos = RT_TOS(ip_hdr(skb)->tos),
+			.flowi4_tos = ip_hdr(skb)->tos & IPTOS_RT_MASK,
 			.flowi4_scope = scope,
 			.flowi4_mark = vmark ? skb->mark : 0,
 		};

[PATCH 4.14 18/57] net: hns: fix return value check in __lb_other_process()

[Greg Kroah-Hartman]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 5ede3ada3da7f050519112b81badc058190b9f9f ]

The function skb_copy() could return NULL, the return value
need to be checked.

Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -418,6 +418,10 @@ static void __lb_other_process(struct hn
 	/* for mutl buffer*/
 	new_skb = skb_copy(skb, GFP_ATOMIC);
 	dev_kfree_skb_any(skb);
+	if (!new_skb) {
+		netdev_err(ndev, "skb alloc failed\n");
+		return;
+	}
 	skb = new_skb;
 
 	check_ok = 0;

[PATCH 4.14 19/57] net: hdlc_ppp: Fix issues when mod_timer is called while timer is running

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1fef73597fa545c35fddc953979013882fbd4e55 ]

ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock"
held. It may call mod_timer to add a new timer. However, at the same time
ppp_timer may be already running and waiting for "ppp->lock". In this
case, there's no need for ppp_timer to continue running and it can just
exit.

If we let ppp_timer continue running, it may call add_timer. This causes
kernel panic because add_timer can't be called with a timer pending.
This patch fixes this problem.

Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/hdlc_ppp.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -572,6 +572,13 @@ static void ppp_timer(unsigned long arg)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ppp->lock, flags);
+	/* mod_timer could be called after we entered this function but
+	 * before we got the lock.
+	 */
+	if (timer_pending(&proto->timer)) {
+		spin_unlock_irqrestore(&ppp->lock, flags);
+		return;
+	}
 	switch (proto->state) {
 	case STOPPING:
 	case REQ_SENT:

[PATCH 4.14 20/57] CDC-NCM: remove "connected" log message

[Greg Kroah-Hartman]

From: Roland Dreier <roland@kernel.org>

[ Upstream commit 59b4a8fa27f5a895582ada1ae5034af7c94a57b5 ]

The cdc_ncm driver passes network connection notifications up to
usbnet_link_change(), which is the right place for any logging.
Remove the netdev_info() duplicating this from the driver itself.

This stops devices such as my "TRENDnet USB 10/100/1G/2.5G LAN"
(ID 20f4:e02b) adapter from spamming the kernel log with

    cdc_ncm 2-2:2.0 enp0s2u2c2: network connection: connected

messages every 60 msec or so.

Signed-off-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20201224032116.2453938-1-roland@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/cdc_ncm.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1630,9 +1630,6 @@ static void cdc_ncm_status(struct usbnet
 		 * USB_CDC_NOTIFY_NETWORK_CONNECTION notification shall be
 		 * sent by device after USB_CDC_NOTIFY_SPEED_CHANGE.
 		 */
-		netif_info(dev, link, dev->net,
-			   "network connection: %sconnected\n",
-			   !!event->wValue ? "" : "dis");
 		usbnet_link_change(dev, !!event->wValue, 0);
 		break;
 

[PATCH 4.14 21/57] net: usb: qmi_wwan: add Quectel EM160R-GL

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 2244 bytes --]

From: "Bjørn Mork" <bjorn@mork.no>

[ Upstream commit cfd82dfc9799c53ef109343a23af006a0f6860a9 ]

New modem using ff/ff/30 for QCDM, ff/00/00 for  AT and NMEA,
and ff/ff/ff for RMNET/QMI.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -995,6 +995,7 @@ static const struct usb_device_id produc
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0125)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0306)},	/* Quectel EP06/EG06/EM06 */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)},	/* Quectel EM160R-GL */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
 
 	/* 3. Combined interface devices matching on interface number */

[PATCH 4.14 22/57] vhost_net: fix ubuf refcount incorrectly when sendmsg fails

[Greg Kroah-Hartman]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 01e31bea7e622f1890c274f4aaaaf8bccd296aa5 ]

Currently the vhost_zerocopy_callback() maybe be called to decrease
the refcount when sendmsg fails in tun. The error handling in vhost
handle_tx_zerocopy() will try to decrease the same refcount again.
This is wrong. To fix this issue, we only call vhost_net_ubuf_put()
when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS.

Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -466,6 +466,7 @@ static void handle_tx(struct vhost_net *
 	size_t hdr_size;
 	struct socket *sock;
 	struct vhost_net_ubuf_ref *uninitialized_var(ubufs);
+	struct ubuf_info *ubuf;
 	bool zcopy, zcopy_used;
 	int sent_pkts = 0;
 
@@ -532,9 +533,7 @@ static void handle_tx(struct vhost_net *
 
 		/* use msg_control to pass vhost zerocopy ubuf info to skb */
 		if (zcopy_used) {
-			struct ubuf_info *ubuf;
 			ubuf = nvq->ubuf_info + nvq->upend_idx;
-
 			vq->heads[nvq->upend_idx].id = cpu_to_vhost32(vq, head);
 			vq->heads[nvq->upend_idx].len = VHOST_DMA_IN_PROGRESS;
 			ubuf->callback = vhost_zerocopy_callback;
@@ -563,7 +562,8 @@ static void handle_tx(struct vhost_net *
 		err = sock->ops->sendmsg(sock, &msg, len);
 		if (unlikely(err < 0)) {
 			if (zcopy_used) {
-				vhost_net_ubuf_put(ubufs);
+				if (vq->heads[ubuf->desc].len == VHOST_DMA_IN_PROGRESS)
+					vhost_net_ubuf_put(ubufs);
 				nvq->upend_idx = ((unsigned)nvq->upend_idx - 1)
 					% UIO_MAXIOV;
 			}

[PATCH 4.14 23/57] net: sched: prevent invalid Scell_log shift count

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit bd1248f1ddbc48b0c30565fce897a3b6423313b8 ]

Check Scell_log shift size in red_check_params() and modify all callers
of red_check_params() to pass Scell_log.

This prevents a shift out-of-bounds as detected by UBSAN:
  UBSAN: shift-out-of-bounds in ./include/net/red.h:252:22
  shift exponent 72 is too large for 32-bit type 'int'

Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+97c5bd9cc81eca63d36e@syzkaller.appspotmail.com
Cc: Nogah Frankel <nogahf@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/red.h     |    4 +++-
 net/sched/sch_choke.c |    2 +-
 net/sched/sch_gred.c  |    2 +-
 net/sched/sch_red.c   |    2 +-
 net/sched/sch_sfq.c   |    2 +-
 5 files changed, 7 insertions(+), 5 deletions(-)

--- a/include/net/red.h
+++ b/include/net/red.h
@@ -168,12 +168,14 @@ static inline void red_set_vars(struct r
 	v->qcount	= -1;
 }
 
-static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog)
+static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog, u8 Scell_log)
 {
 	if (fls(qth_min) + Wlog > 32)
 		return false;
 	if (fls(qth_max) + Wlog > 32)
 		return false;
+	if (Scell_log >= 32)
+		return false;
 	if (qth_max < qth_min)
 		return false;
 	return true;
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -370,7 +370,7 @@ static int choke_change(struct Qdisc *sc
 
 	ctl = nla_data(tb[TCA_CHOKE_PARMS]);
 
-	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log))
 		return -EINVAL;
 
 	if (ctl->limit > CHOKE_MAX_QUEUE)
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -356,7 +356,7 @@ static inline int gred_change_vq(struct
 	struct gred_sched *table = qdisc_priv(sch);
 	struct gred_sched_data *q = table->tab[dp];
 
-	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log))
 		return -EINVAL;
 
 	if (!q) {
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -184,7 +184,7 @@ static int red_change(struct Qdisc *sch,
 	max_P = tb[TCA_RED_MAX_P] ? nla_get_u32(tb[TCA_RED_MAX_P]) : 0;
 
 	ctl = nla_data(tb[TCA_RED_PARMS]);
-	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log))
 		return -EINVAL;
 
 	if (ctl->limit > 0) {
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -649,7 +649,7 @@ static int sfq_change(struct Qdisc *sch,
 	}
 
 	if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
-					ctl_v1->Wlog))
+					ctl_v1->Wlog, ctl_v1->Scell_log))
 		return -EINVAL;
 	if (ctl_v1 && ctl_v1->qth_min) {
 		p = kmalloc(sizeof(*p), GFP_KERNEL);

[PATCH 4.14 24/57] net-sysfs: take the rtnl lock when accessing xps_cpus_map and num_tc

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit fb25038586d0064123e393cadf1fadd70a9df97a ]

Accesses to dev->xps_cpus_map (when using dev->num_tc) should be
protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't
see an actual bug being triggered, but let's be safe here and take the
rtnl lock while accessing the map in sysfs.

Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |   23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1207,23 +1207,30 @@ static const struct attribute_group dql_
 static ssize_t xps_cpus_show(struct netdev_queue *queue,
 			     char *buf)
 {
+	int cpu, len, ret, num_tc = 1, tc = 0;
 	struct net_device *dev = queue->dev;
-	int cpu, len, num_tc = 1, tc = 0;
 	struct xps_dev_maps *dev_maps;
 	cpumask_var_t mask;
 	unsigned long index;
 
 	index = get_netdev_queue_index(queue);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
+
 	if (dev->num_tc) {
 		num_tc = dev->num_tc;
 		tc = netdev_txq_to_tc(dev, index);
-		if (tc < 0)
-			return -EINVAL;
+		if (tc < 0) {
+			ret = -EINVAL;
+			goto err_rtnl_unlock;
+		}
 	}
 
-	if (!zalloc_cpumask_var(&mask, GFP_KERNEL))
-		return -ENOMEM;
+	if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) {
+		ret = -ENOMEM;
+		goto err_rtnl_unlock;
+	}
 
 	rcu_read_lock();
 	dev_maps = rcu_dereference(dev->xps_maps);
@@ -1246,9 +1253,15 @@ static ssize_t xps_cpus_show(struct netd
 	}
 	rcu_read_unlock();
 
+	rtnl_unlock();
+
 	len = snprintf(buf, PAGE_SIZE, "%*pb\n", cpumask_pr_args(mask));
 	free_cpumask_var(mask);
 	return len < PAGE_SIZE ? len : -EINVAL;
+
+err_rtnl_unlock:
+	rtnl_unlock();
+	return ret;
 }
 
 static ssize_t xps_cpus_store(struct netdev_queue *queue,

[PATCH 4.14 25/57] net: mvpp2: Fix GoP port 3 Networking Complex Control configurations

[Greg Kroah-Hartman]

From: Stefan Chulski <stefanc@marvell.com>

[ Upstream commit 2575bc1aa9d52a62342b57a0b7d0a12146cf6aed ]

During GoP port 2 Networking Complex Control mode of operation configurations,
also GoP port 3 mode of operation was wrongly set.
Patch removes these configurations.

Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP")
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -4349,7 +4349,7 @@ static void mvpp22_gop_init_rgmii(struct
 
 	regmap_read(priv->sysctrl_base, GENCONF_CTRL0, &val);
 	if (port->gop_id == 2)
-		val |= GENCONF_CTRL0_PORT0_RGMII | GENCONF_CTRL0_PORT1_RGMII;
+		val |= GENCONF_CTRL0_PORT0_RGMII;
 	else if (port->gop_id == 3)
 		val |= GENCONF_CTRL0_PORT1_RGMII_MII;
 	regmap_write(priv->sysctrl_base, GENCONF_CTRL0, val);

[PATCH 4.14 26/57] net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 54ddbdb024882e226055cc4c3c246592ddde2ee5 ]

The driver is already allocating receive buffers of 2KiB and the
Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2153,6 +2153,7 @@ static int bcm_sysport_probe(struct plat
 	/* HW supported features, none enabled by default */
 	dev->hw_features |= NETIF_F_RXCSUM | NETIF_F_HIGHDMA |
 				NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->max_mtu = UMAC_MAX_MTU_SIZE;
 
 	/* Request the WOL interrupt and advertise suspend if available */
 	priv->wol_irq_disabled = 1;

[PATCH 4.14 27/57] video: hyperv_fb: Fix the mmap() regression for v5.4.y and older

[Greg Kroah-Hartman]

From: Dexuan Cui <decui@microsoft.com>

db49200b1dad is backported from the mainline commit
5f1251a48c17 ("video: hyperv_fb: Fix the cache type when mapping the VRAM"),
to v5.4.y and older stable branches, but unluckily db49200b1dad causes
mmap() to fail for /dev/fb0 due to EINVAL:

[ 5797.049560] x86/PAT: a.out:1910 map pfn expected mapping type
  uncached-minus for [mem 0xf8200000-0xf85cbfff], got write-back

This means the v5.4.y kernel detects an incompatibility issue about the
mapping type of the VRAM: db49200b1dad changes to use Write-Back when
mapping the VRAM, while the mmap() syscall tries to use Uncached-minus.
That’s to say, the kernel thinks Uncached-minus is incompatible with
Write-Back: see drivers/video/fbdev/core/fbmem.c: fb_mmap() ->
vm_iomap_memory() -> io_remap_pfn_range() -> ... -> track_pfn_remap() ->
reserve_pfn_range().

Note: any v5.5 and newer kernel doesn't have the issue, because they
have commit
d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
, and when the hyperv_fb driver has the deferred_io support,
fb_deferred_io_init() overrides info->fbops->fb_mmap with
fb_deferred_io_mmap(), which doesn’t check the mapping type
incompatibility. Note: since it's VRAM here, the checking is not really
necessary.

Fix the regression by ioremap_wc(), which uses Write-combining. The kernel
thinks it's compatible with Uncached-minus. The VRAM mappped by
ioremap_wc() is slightly slower than mapped by ioremap_cache(), but is
still significantly faster than by ioremap().

Change the comment accordingly. Linux VM on ARM64 Hyper-V is still not
working in the latest mainline yet, and when it works in future, the ARM64
support is unlikely to be backported to v5.4 and older, so using
ioremap_wc() in v5.4 and older should be ok.

Note: this fix is only targeted at the stable branches:
v5.4.y, v4.19.y, v4.14.y, v4.9.y and v4.4.y.

Fixes: db49200b1dad ("video: hyperv_fb: Fix the cache type when mapping the VRAM")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/hyperv_fb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index f3938c5278832..6e680007cf6b0 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -713,11 +713,9 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 	}
 
 	/*
-	 * Map the VRAM cacheable for performance. This is also required for
-	 * VM Connect to display properly for ARM64 Linux VM, as the host also
-	 * maps the VRAM cacheable.
+	 * Map the VRAM cacheable for performance.
 	 */
-	fb_virt = ioremap_cache(par->mem->start, screen_fb_size);
+	fb_virt = ioremap_wc(par->mem->start, screen_fb_size);
 	if (!fb_virt)
 		goto err2;
 
-- 
2.27.0

[PATCH 4.14 28/57] crypto: ecdh - avoid buffer overflow in ecdh_set_secret()

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

commit 0aa171e9b267ce7c52d3a3df7bc9c1fc0203dec5 upstream.

Pavel reports that commit 17858b140bf4 ("crypto: ecdh - avoid unaligned
accesses in ecdh_set_secret()") fixes one problem but introduces another:
the unconditional memcpy() introduced by that commit may overflow the
target buffer if the source data is invalid, which could be the result of
intentional tampering.

So check params.key_size explicitly against the size of the target buffer
before validating the key further.

Fixes: 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/ecdh.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/ecdh.c
+++ b/crypto/ecdh.c
@@ -43,7 +43,8 @@ static int ecdh_set_secret(struct crypto
 	struct ecdh params;
 	unsigned int ndigits;
 
-	if (crypto_ecdh_decode_key(buf, len, &params) < 0)
+	if (crypto_ecdh_decode_key(buf, len, &params) < 0 ||
+	    params.key_size > sizeof(ctx->private_key))
 		return -EINVAL;
 
 	ndigits = ecdh_supported_curve(params.curve_id);

[PATCH 4.14 29/57] usb: gadget: enable super speed plus

[Greg Kroah-Hartman]

From: taehyun.cho <taehyun.cho@samsung.com>

commit e2459108b5a0604c4b472cae2b3cb8d3444c77fb upstream.

Enable Super speed plus in configfs to support USB3.1 Gen2.
This ensures that when a USB gadget is plugged in, it is
enumerated as Gen 2 and connected at 10 Gbps if the host and
cable are capable of it.

Many in-tree gadget functions (fs, midi, acm, ncm, mass_storage,
etc.) already have SuperSpeed Plus support.

Tested: plugged gadget into Linux host and saw:
[284907.385986] usb 8-2: new SuperSpeedPlus Gen 2 USB device number 3 using xhci_hcd

Tested-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: taehyun.cho <taehyun.cho@samsung.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Link: https://lore.kernel.org/r/20210106154625.2801030-1-lorenzo@google.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/configfs.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1504,7 +1504,7 @@ static const struct usb_gadget_driver co
 	.suspend	= configfs_composite_suspend,
 	.resume		= configfs_composite_resume,
 
-	.max_speed	= USB_SPEED_SUPER,
+	.max_speed	= USB_SPEED_SUPER_PLUS,
 	.driver = {
 		.owner          = THIS_MODULE,
 		.name		= "configfs-gadget",
@@ -1544,7 +1544,7 @@ static struct config_group *gadgets_make
 	gi->composite.unbind = configfs_do_nothing;
 	gi->composite.suspend = NULL;
 	gi->composite.resume = NULL;
-	gi->composite.max_speed = USB_SPEED_SUPER;
+	gi->composite.max_speed = USB_SPEED_SUPER_PLUS;
 
 	spin_lock_init(&gi->spinlock);
 	mutex_init(&gi->lock);

[PATCH 4.14 30/57] USB: cdc-acm: blacklist another IR Droid device

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit 0ffc76539e6e8d28114f95ac25c167c37b5191b3 upstream.

This device is supported by the IR Toy driver.

Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201227134502.4548-2-sean@mess.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1952,6 +1952,10 @@ static const struct usb_device_id acm_id
 	{ USB_DEVICE(0x04d8, 0x0083),	/* Bootloader mode */
 	.driver_info = IGNORE_DEVICE,
 	},
+
+	{ USB_DEVICE(0x04d8, 0xf58b),
+	.driver_info = IGNORE_DEVICE,
+	},
 #endif
 
 	/*Samsung phone in firmware update mode */

[PATCH 4.14 31/57] usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

commit ce722da66d3e9384aa2de9d33d584ee154e5e157 upstream.

In accordance with [1] the DWC_usb3 core sets the GUSB2PHYACCn.VStsDone
bit when the PHY vendor control access is done and clears it when the
application initiates a new transaction. The doc doesn't say anything
about the GUSB2PHYACCn.VStsBsy flag serving for the same purpose. Moreover
we've discovered that the VStsBsy flag can be cleared before the VStsDone
bit. So using the former as a signal of the PHY control registers
completion might be dangerous. Let's have the VStsDone flag utilized
instead then.

[1] Synopsys DesignWare Cores SuperSpeed USB 3.0 xHCI Host Controller
    Databook, 2.70a, December 2013, p.388

Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201210085008.13264-2-Sergey.Semin@baikalelectronics.ru
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/core.h |    1 +
 drivers/usb/dwc3/ulpi.c |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -227,6 +227,7 @@
 
 /* Global USB2 PHY Vendor Control Register */
 #define DWC3_GUSB2PHYACC_NEWREGREQ	BIT(25)
+#define DWC3_GUSB2PHYACC_DONE		BIT(24)
 #define DWC3_GUSB2PHYACC_BUSY		BIT(23)
 #define DWC3_GUSB2PHYACC_WRITE		BIT(22)
 #define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -27,7 +27,7 @@ static int dwc3_ulpi_busyloop(struct dwc
 
 	while (count--) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
-		if (!(reg & DWC3_GUSB2PHYACC_BUSY))
+		if (reg & DWC3_GUSB2PHYACC_DONE)
 			return 0;
 		cpu_relax();
 	}

[PATCH 4.14 32/57] usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

commit 83a43ff80a566de8718dfc6565545a0080ec1fb5 upstream.

if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/chipidea/ci_hdrc_imx.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -134,9 +134,13 @@ static struct imx_usbmisc_data *usbmisc_
 	misc_pdev = of_find_device_by_node(args.np);
 	of_node_put(args.np);
 
-	if (!misc_pdev || !platform_get_drvdata(misc_pdev))
+	if (!misc_pdev)
 		return ERR_PTR(-EPROBE_DEFER);
 
+	if (!platform_get_drvdata(misc_pdev)) {
+		put_device(&misc_pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
 	data->dev = &misc_pdev->dev;
 
 	if (of_find_property(np, "disable-over-current", NULL))

[PATCH 4.14 33/57] USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set

[Greg Kroah-Hartman]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760 upstream.

The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit
latency is too long") was constraining the xhci code not to allow U1/U2
sleep states if the latency to wake up from the U-states reached the
service interval of an periodic endpoint. This fix was not taking into
account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time
will be calculated and configured differently.

It checks for u1_params.mel/u2_params.mel as a limit. But the code could
decide to write another MEL into the hardware. This leads to broken
cases where not enough bandwidth is available for other devices:

usb 1-2: can't set config #1, error -28

This patch is fixing that case by checking for timeout_ns after the
wakeup time was calculated depending on the quirks.

Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4390,19 +4390,19 @@ static u16 xhci_calculate_u1_timeout(str
 {
 	unsigned long long timeout_ns;
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+	else
+		timeout_ns = udev->u1_params.sel;
+
 	/* Prevent U1 if service interval is shorter than U1 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
 			dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
-	else
-		timeout_ns = udev->u1_params.sel;
-
 	/* The U1 timeout is encoded in 1us intervals.
 	 * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
 	 */
@@ -4454,19 +4454,19 @@ static u16 xhci_calculate_u2_timeout(str
 {
 	unsigned long long timeout_ns;
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+	else
+		timeout_ns = udev->u2_params.sel;
+
 	/* Prevent U2 if service interval is shorter than U2 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
 			dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
-	else
-		timeout_ns = udev->u2_params.sel;
-
 	/* The U2 timeout is encoded in 256us intervals */
 	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
 	/* If the necessary timeout value is bigger than what we can set in the

[PATCH 4.14 34/57] usb: usbip: vhci_hcd: protect shift size

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 718bf42b119de652ebcc93655a1f33a9c0d04b3c upstream.

Fix shift out-of-bounds in vhci_hcd.c:

  UBSAN: shift-out-of-bounds in ../drivers/usb/usbip/vhci_hcd.c:399:41
  shift exponent 768 is too large for 32-bit type 'int'

Fixes: 03cd00d538a6 ("usbip: vhci-hcd: Set the vhci structure up to work")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+297d20e437b79283bf6d@syzkaller.appspotmail.com
Cc: Yuyang Du <yuyang.du@intel.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229071309.18418-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/vhci_hcd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -410,6 +410,8 @@ static int vhci_hub_control(struct usb_h
 		default:
 			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
 					  wValue);
+			if (wValue >= 32)
+				goto error;
 			vhci_hcd->port_status[rhport] &= ~(1 << wValue);
 			break;
 		}

[PATCH 4.14 35/57] usb: uas: Add PNY USB Portable SSD to unusual_uas

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 96ebc9c871d8a28fb22aa758dd9188a4732df482 upstream.

Here's another variant PNY Pro Elite USB 3.1 Gen 2 portable SSD that
hangs and doesn't respond to ATA_1x pass-through commands. If it doesn't
support these commands, it should respond properly to the host. Add it
to the unusual uas list to be able to move forward with other
operations.

Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/2edc7af892d0913bf06f5b35e49ec463f03d5ed8.1609819418.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/unusual_uas.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -167,6 +167,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x99
 		US_FL_BROKEN_FUA),
 
 /* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
+UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999,
+		"PNY",
+		"Pro Elite SSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
 UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999,
 		"PNY",
 		"Pro Elite SSD",

[PATCH 4.14 36/57] USB: serial: iuu_phoenix: fix DMA from stack

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 54d0a3ab80f49f19ee916def62fe067596833403 upstream.

Stack-allocated buffers cannot be used for DMA (on all architectures) so
allocate the flush command buffer using kmalloc().

Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.25
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/iuu_phoenix.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -543,23 +543,29 @@ static int iuu_uart_flush(struct usb_ser
 	struct device *dev = &port->dev;
 	int i;
 	int status;
-	u8 rxcmd = IUU_UART_RX;
+	u8 *rxcmd;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
 	if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
 		return -EIO;
 
+	rxcmd = kmalloc(1, GFP_KERNEL);
+	if (!rxcmd)
+		return -ENOMEM;
+
+	rxcmd[0] = IUU_UART_RX;
+
 	for (i = 0; i < 2; i++) {
-		status = bulk_immediate(port, &rxcmd, 1);
+		status = bulk_immediate(port, rxcmd, 1);
 		if (status != IUU_OPERATION_OK) {
 			dev_dbg(dev, "%s - uart_flush_write error\n", __func__);
-			return status;
+			goto out_free;
 		}
 
 		status = read_immediate(port, &priv->len, 1);
 		if (status != IUU_OPERATION_OK) {
 			dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
-			return status;
+			goto out_free;
 		}
 
 		if (priv->len > 0) {
@@ -567,12 +573,16 @@ static int iuu_uart_flush(struct usb_ser
 			status = read_immediate(port, priv->buf, priv->len);
 			if (status != IUU_OPERATION_OK) {
 				dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
-				return status;
+				goto out_free;
 			}
 		}
 	}
 	dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__);
 	iuu_led(port, 0, 0xF000, 0, 0xFF);
+
+out_free:
+	kfree(rxcmd);
+
 	return status;
 }
 

[PATCH 4.14 37/57] USB: serial: option: add LongSung M5710 module support

[Greg Kroah-Hartman]

From: Daniel Palmer <daniel@0x0f.com>

commit 0e2d6795e8dbe91c2f5473564c6b25d11df3778b upstream.

Add a device-id entry for the LongSung M5710 module.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2df3 ProdID=9d03 Rev= 1.00
S:  Manufacturer=Marvell
S:  Product=Mobile Composite Device Bus
S:  SerialNumber=<snip>
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
https://lore.kernel.org/r/20201227031716.1343300-1-daniel@0x0f.com
[ johan: drop id defines, only bind to vendor class ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2059,6 +2059,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */

[PATCH 4.14 38/57] USB: serial: option: add Quectel EM160R-GL

[Greg Kroah-Hartman]

From: Bjørn Mork <bjorn@mork.no>

commit d6c1ddd938d84a1adef7e19e8efc10e1b4df5034 upstream.

New modem using ff/ff/30 for QCDM, ff/00/00 for  AT and NMEA,
and ff/ff/ff for RMNET/QMI.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork <bjorn@mork.no>
[ johan: add model comment ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1120,6 +1120,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) },	/* EM160R-GL */
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),

[PATCH 4.14 39/57] USB: yurex: fix control-URB timeout handling

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 372c93131998c0622304bed118322d2a04489e63 upstream.

Make sure to always cancel the control URB in write() so that it can be
reused after a timeout or spurious CMD_ACK.

Currently any further write requests after a timeout would fail after
triggering a WARN() in usb_submit_urb() when attempting to submit the
already active URB.

Reported-by: syzbot+e87ebe0f7913f71f2ea5@syzkaller.appspotmail.com
Fixes: 6bc235a2e24a ("USB: add driver for Meywa-Denki & Kayac YUREX")
Cc: stable <stable@vger.kernel.org>     # 2.6.37
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/yurex.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -501,6 +501,9 @@ static ssize_t yurex_write(struct file *
 		timeout = schedule_timeout(YUREX_WRITE_TIMEOUT);
 	finish_wait(&dev->waitq, &wait);
 
+	/* make sure URB is idle after timeout or (spurious) CMD_ACK */
+	usb_kill_urb(dev->cntl_urb);
+
 	mutex_unlock(&dev->io_mutex);
 
 	if (retval < 0) {

[PATCH 4.14 40/57] USB: usblp: fix DMA to stack

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 020a1f453449294926ca548d8d5ca970926e8dfd upstream.

Stack-allocated buffers cannot be used for DMA (on all architectures).

Replace the HP-channel macro with a helper function that allocates a
dedicated transfer buffer so that it can continue to be used with
arguments from the stack.

Note that the buffer is cleared on allocation as usblp_ctrl_msg()
returns success also on short transfers (the buffer is only used for
debugging).

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210104145302.2087-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/usblp.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -289,8 +289,25 @@ static int usblp_ctrl_msg(struct usblp *
 #define usblp_reset(usblp)\
 	usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
 
-#define usblp_hp_channel_change_request(usblp, channel, buffer) \
-	usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
+static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST,
+			USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE,
+			channel, buf, 1);
+	if (ret == 0)
+		*new_channel = buf[0];
+
+	kfree(buf);
+
+	return ret;
+}
 
 /*
  * See the description for usblp_select_alts() below for the usage

[PATCH 4.14 41/57] ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit c06ccf3ebb7503706ea49fd248e709287ef385a3 upstream.

The calculation of in_cables and out_cables bitmaps are done with the
bit shift by the value from the descriptor, which is an arbitrary
value, and can lead to UBSAN shift-out-of-bounds warnings.

Fix it by filtering the bad descriptor values with the check of the
upper bound 0x10 (the cable bitmaps are 16 bits).

Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/midi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1867,6 +1867,8 @@ static int snd_usbmidi_get_ms_info(struc
 		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
 		if (!ms_ep)
 			continue;
+		if (ms_ep->bNumEmbMIDIJack > 0x10)
+			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
 				if (++epidx >= MIDI_MAX_ENDPOINTS) {
@@ -2119,6 +2121,8 @@ static int snd_usbmidi_detect_roland(str
 		    cs_desc[1] == USB_DT_CS_INTERFACE &&
 		    cs_desc[2] == 0xf1 &&
 		    cs_desc[3] == 0x02) {
+			if (cs_desc[4] > 0x10 || cs_desc[5] > 0x10)
+				continue;
 			endpoint->in_cables  = (1 << cs_desc[4]) - 1;
 			endpoint->out_cables = (1 << cs_desc[5]) - 1;
 			return snd_usbmidi_detect_endpoints(umidi, endpoint, 1);

[PATCH 4.14 42/57] usb: gadget: select CONFIG_CRC32

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit d7889c2020e08caab0d7e36e947f642d91015bd0 upstream.

Without crc32 support, this driver fails to link:

arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_eem.o: in function `eem_unwrap':
f_eem.c:(.text+0x11cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_ncm.o:f_ncm.c:(.text+0x1e40):
more undefined references to `crc32_le' follow

Fixes: 6d3865f9d41f ("usb: gadget: NCM: Add transmit multi-frame.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210103214224.1996535-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -264,6 +264,7 @@ config USB_CONFIGFS_NCM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_NCM
+	select CRC32
 	help
 	  NCM is an advanced protocol for Ethernet encapsulation, allows
 	  grouping of several ethernet frames into one USB transfer and
@@ -313,6 +314,7 @@ config USB_CONFIGFS_EEM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_EEM
+	select CRC32
 	help
 	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
 	  and therefore can be supported by more hardware.  Technically ECM and

[PATCH 4.14 43/57] usb: gadget: f_uac2: reset wMaxPacketSize

[Greg Kroah-Hartman]

From: Jerome Brunet <jbrunet@baylibre.com>

commit 9389044f27081d6ec77730c36d5bf9a1288bcda2 upstream.

With commit 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
wMaxPacketSize is computed dynamically but the value is never reset.

Because of this, the actual maximum packet size can only decrease each time
the audio gadget is instantiated.

Reset the endpoint maximum packet size and mark wMaxPacketSize as dynamic
to solve the problem.

Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201221173531.215169-2-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_uac2.c |   69 +++++++++++++++++++++++++++--------
 1 file changed, 55 insertions(+), 14 deletions(-)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -279,7 +279,7 @@ static struct usb_endpoint_descriptor fs
 
 	.bEndpointAddress = USB_DIR_OUT,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -288,7 +288,7 @@ static struct usb_endpoint_descriptor hs
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -356,7 +356,7 @@ static struct usb_endpoint_descriptor fs
 
 	.bEndpointAddress = USB_DIR_IN,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -365,7 +365,7 @@ static struct usb_endpoint_descriptor hs
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -452,12 +452,28 @@ struct cntrl_range_lay3 {
 	__le32	dRES;
 } __packed;
 
-static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
+static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 	struct usb_endpoint_descriptor *ep_desc,
-	unsigned int factor, bool is_playback)
+	enum usb_device_speed speed, bool is_playback)
 {
 	int chmask, srate, ssize;
-	u16 max_packet_size;
+	u16 max_size_bw, max_size_ep;
+	unsigned int factor;
+
+	switch (speed) {
+	case USB_SPEED_FULL:
+		max_size_ep = 1023;
+		factor = 1000;
+		break;
+
+	case USB_SPEED_HIGH:
+		max_size_ep = 1024;
+		factor = 8000;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
 	if (is_playback) {
 		chmask = uac2_opts->p_chmask;
@@ -469,10 +485,12 @@ static void set_ep_max_packet_size(const
 		ssize = uac2_opts->c_ssize;
 	}
 
-	max_packet_size = num_channels(chmask) * ssize *
+	max_size_bw = num_channels(chmask) * ssize *
 		DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
-	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size,
-				le16_to_cpu(ep_desc->wMaxPacketSize)));
+	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
+						    max_size_ep));
+
+	return 0;
 }
 
 static int
@@ -555,10 +573,33 @@ afunc_bind(struct usb_configuration *cfg
 	uac2->as_in_alt = 0;
 
 	/* Calculate wMaxPacketSize according to audio bandwidth */
-	set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true);
-	set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false);
-	set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true);
-	set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false);
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
 
 	agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
 	if (!agdev->out_ep) {

[PATCH 4.14 44/57] usb: gadget: function: printer: Fix a memory leak for interface descriptor

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang@windriver.com>

commit 2cc332e4ee4febcbb685e2962ad323fe4b3b750a upstream.

When printer driver is loaded, the printer_func_bind function is called, in
this function, the interface descriptor be allocated memory, if after that,
the error occurred, the interface descriptor memory need to be free.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20201210020148.6691-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_printer.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1130,6 +1130,7 @@ fail_tx_reqs:
 		printer_req_free(dev->in_ep, req);
 	}
 
+	usb_free_all_descriptors(f);
 	return ret;
 
 }

[PATCH 4.14 45/57] USB: gadget: legacy: fix return error code in acm_ms_bind()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

commit c91d3a6bcaa031f551ba29a496a8027b31289464 upstream.

If usb_otg_descriptor_alloc() failed, it need return ENOMEM.

Fixes: 578aa8a2b12c ("usb: gadget: acm_ms: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117092955.4102785-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/legacy/acm_ms.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/legacy/acm_ms.c
+++ b/drivers/usb/gadget/legacy/acm_ms.c
@@ -207,8 +207,10 @@ static int acm_ms_bind(struct usb_compos
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail_string_ids;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

[PATCH 4.14 46/57] usb: gadget: Fix spinlock lockup on usb_function_deactivate

[Greg Kroah-Hartman]

From: Sriharsha Allenki <sallenki@codeaurora.org>

commit 5cc35c224a80aa5a5a539510ef049faf0d6ed181 upstream.

There is a spinlock lockup as part of composite_disconnect
when it tries to acquire cdev->lock as part of usb_gadget_deactivate.
This is because the usb_gadget_deactivate is called from
usb_function_deactivate with the same spinlock held.

This would result in the below call stack and leads to stall.

rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu:     3-...0: (1 GPs behind) idle=162/1/0x4000000000000000
softirq=10819/10819 fqs=2356
 (detected by 2, t=5252 jiffies, g=20129, q=3770)
 Task dump for CPU 3:
 task:uvc-gadget_wlhe state:R  running task     stack:    0 pid:  674 ppid:
 636 flags:0x00000202
 Call trace:
  __switch_to+0xc0/0x170
  _raw_spin_lock_irqsave+0x84/0xb0
  composite_disconnect+0x28/0x78
  configfs_composite_disconnect+0x68/0x70
  usb_gadget_disconnect+0x10c/0x128
  usb_gadget_deactivate+0xd4/0x108
  usb_function_deactivate+0x6c/0x80
  uvc_function_disconnect+0x20/0x58
  uvc_v4l2_release+0x30/0x88
  v4l2_release+0xbc/0xf0
  __fput+0x7c/0x230
  ____fput+0x14/0x20
  task_work_run+0x88/0x140
  do_notify_resume+0x240/0x6f0
  work_pending+0x8/0x200

Fix this by doing an unlock on cdev->lock before the usb_gadget_deactivate
call from usb_function_deactivate.

The same lockup can happen in the usb_gadget_activate path. Fix that path
as well.

Reported-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/linux-usb/20201102094936.GA29581@b29397-desktop/
Tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201202130220.24926-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/composite.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -395,8 +395,11 @@ int usb_function_deactivate(struct usb_f
 
 	spin_lock_irqsave(&cdev->lock, flags);
 
-	if (cdev->deactivations == 0)
+	if (cdev->deactivations == 0) {
+		spin_unlock_irqrestore(&cdev->lock, flags);
 		status = usb_gadget_deactivate(cdev->gadget);
+		spin_lock_irqsave(&cdev->lock, flags);
+	}
 	if (status == 0)
 		cdev->deactivations++;
 
@@ -427,8 +430,11 @@ int usb_function_activate(struct usb_fun
 		status = -EINVAL;
 	else {
 		cdev->deactivations--;
-		if (cdev->deactivations == 0)
+		if (cdev->deactivations == 0) {
+			spin_unlock_irqrestore(&cdev->lock, flags);
 			status = usb_gadget_activate(cdev->gadget);
+			spin_lock_irqsave(&cdev->lock, flags);
+		}
 	}
 
 	spin_unlock_irqrestore(&cdev->lock, flags);

[PATCH 4.14 47/57] usb: gadget: configfs: Preserve function ordering after bind failure

[Greg Kroah-Hartman]

From: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>

commit 6cd0fe91387917be48e91385a572a69dfac2f3f7 upstream.

When binding the ConfigFS gadget to a UDC, the functions in each
configuration are added in list order. However, if usb_add_function()
fails, the failed function is put back on its configuration's
func_list and purge_configs_funcs() is called to further clean up.

purge_configs_funcs() iterates over the configurations and functions
in forward order, calling unbind() on each of the previously added
functions. But after doing so, each function gets moved to the
tail of the configuration's func_list. This results in reshuffling
the original order of the functions within a configuration such
that the failed function now appears first even though it may have
originally appeared in the middle or even end of the list. At this
point if the ConfigFS gadget is attempted to re-bind to the UDC,
the functions will be added in a different order than intended,
with the only recourse being to remove and relink the functions all
over again.

An example of this as follows:

ln -s functions/mass_storage.0 configs/c.1
ln -s functions/ncm.0 configs/c.1
ln -s functions/ffs.adb configs/c.1	# oops, forgot to start adbd
echo "<udc device>" > UDC		# fails
start adbd
echo "<udc device>" > UDC		# now succeeds, but...
					# bind order is
					# "ADB", mass_storage, ncm

[30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30133.119974] using random self ethernet address
[30133.120002] using random host ethernet address
[30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26
[30133.140015] usb0: MAC 6e:28:7e:42:66:6a
[30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19
[30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200
[30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00
[30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19
[30136.661933] init: starting service 'adbd'...
[30136.700126] read descriptors
[30136.700413] read strings
[30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30138.575631] using random self ethernet address
[30138.575660] using random host ethernet address
[30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8
[30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0
[30138.791490] configfs-gadget gadget: super-speed config #1: c

Fix this by reversing the iteration order of the functions in
purge_config_funcs() when unbinding them, and adding them back to
the config's func_list at the head instead of the tail. This
ensures that we unbind and unwind back to the original list order.

Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201229224443.31623-1-jackp@codeaurora.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/configfs.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1216,9 +1216,9 @@ static void purge_configs_funcs(struct g
 
 		cfg = container_of(c, struct config_usb_cfg, c);
 
-		list_for_each_entry_safe(f, tmp, &c->functions, list) {
+		list_for_each_entry_safe_reverse(f, tmp, &c->functions, list) {
 
-			list_move_tail(&f->list, &cfg->func_list);
+			list_move(&f->list, &cfg->func_list);
 			if (f->unbind) {
 				dev_dbg(&gi->cdev.gadget->dev,
 				         "unbind function '%s'/%p\n",

[PATCH 4.14 48/57] usb: gadget: configfs: Fix use-after-free issue with udc_name

[Greg Kroah-Hartman]

From: Eddie Hung <eddie.hung@mediatek.com>

commit 64e6bbfff52db4bf6785fab9cffab850b2de6870 upstream.

There is a use-after-free issue, if access udc_name
in function gadget_dev_desc_UDC_store after another context
free udc_name in function unregister_gadget.

Context 1:
gadget_dev_desc_UDC_store()->unregister_gadget()->
free udc_name->set udc_name to NULL

Context 2:
gadget_dev_desc_UDC_show()-> access udc_name

Call trace:
dump_backtrace+0x0/0x340
show_stack+0x14/0x1c
dump_stack+0xe4/0x134
print_address_description+0x78/0x478
__kasan_report+0x270/0x2ec
kasan_report+0x10/0x18
__asan_report_load1_noabort+0x18/0x20
string+0xf4/0x138
vsnprintf+0x428/0x14d0
sprintf+0xe4/0x12c
gadget_dev_desc_UDC_show+0x54/0x64
configfs_read_file+0x210/0x3a0
__vfs_read+0xf0/0x49c
vfs_read+0x130/0x2b4
SyS_read+0x114/0x208
el0_svc_naked+0x34/0x38

Add mutex_lock to protect this kind of scenario.

Signed-off-by: Eddie Hung <eddie.hung@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1609239215-21819-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/configfs.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -232,9 +232,16 @@ static ssize_t gadget_dev_desc_bcdUSB_st
 
 static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page)
 {
-	char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name;
+	struct gadget_info *gi = to_gadget_info(item);
+	char *udc_name;
+	int ret;
 
-	return sprintf(page, "%s\n", udc_name ?: "");
+	mutex_lock(&gi->lock);
+	udc_name = gi->composite.gadget_driver.udc_name;
+	ret = sprintf(page, "%s\n", udc_name ?: "");
+	mutex_unlock(&gi->lock);
+
+	return ret;
 }
 
 static int unregister_gadget(struct gadget_info *gi)

[PATCH 4.14 49/57] USB: serial: keyspan_pda: remove unused variable

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

Remove an unused variable which was mistakingly left by commit
37faf5061541 ("USB: serial: keyspan_pda: fix write-wakeup
use-after-free") and only removed by a later change.

This is needed to suppress a W=1 warning about the unused variable in
the stable trees that the build bots triggers.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/keyspan_pda.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -559,10 +559,8 @@ exit:
 static void keyspan_pda_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct keyspan_pda_private *priv;
 
 	set_bit(0, &port->write_urbs_free);
-	priv = usb_get_serial_port_data(port);
 
 	/* queue up a wakeup at scheduler time */
 	usb_serial_port_softint(port);

[PATCH 4.14 50/57] x86/mm: Fix leak of pmd ptlock

[Greg Kroah-Hartman]

From: Dan Williams <dan.j.williams@intel.com>

commit d1c5246e08eb64991001d97a3bd119c93edbc79a upstream.

Commit

  28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")

introduced a new location where a pmd was released, but neglected to
run the pmd page destructor. In fact, this happened previously for a
different pmd release path and was fixed by commit:

  c283610e44ec ("x86, mm: do not leak page->ptl for pmd page tables").

This issue was hidden until recently because the failure mode is silent,
but commit:

  b2b29d6d0119 ("mm: account PMD tables like PTE tables")

turns the failure mode into this signature:

 BUG: Bad page state in process lt-pmem-ns  pfn:15943d
 page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d
 flags: 0xaffff800000000()
 raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000
 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000
 page dumped because: nonzero mapcount
 [..]
  dump_stack+0x8b/0xb0
  bad_page.cold+0x63/0x94
  free_pcp_prepare+0x224/0x270
  free_unref_page+0x18/0xd0
  pud_free_pmd_page+0x146/0x160
  ioremap_pud_range+0xe3/0x350
  ioremap_page_range+0x108/0x160
  __ioremap_caller.constprop.0+0x174/0x2b0
  ? memremap+0x7a/0x110
  memremap+0x7a/0x110
  devm_memremap+0x53/0xa0
  pmem_attach_disk+0x4ed/0x530 [nd_pmem]
  ? __devm_release_region+0x52/0x80
  nvdimm_bus_probe+0x85/0x210 [libnvdimm]

Given this is a repeat occurrence it seemed prudent to look for other
places where this destructor might be missing and whether a better
helper is needed. try_to_free_pmd_page() looks like a candidate, but
testing with setting up and tearing down pmd mappings via the dax unit
tests is thus far not triggering the failure.

As for a better helper pmd_free() is close, but it is a messy fit
due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call
paravirt_tlb_remove_table() instead of free_page(), so open-coded
pgtable_pmd_page_dtor() seems the best way forward for now.

Debugged together with Matthew Wilcox <willy@infradead.org>.

Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/pgtable.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -765,6 +765,8 @@ int pud_free_pmd_page(pud_t *pud, unsign
 	}
 
 	free_page((unsigned long)pmd_sv);
+
+	pgtable_pmd_page_dtor(virt_to_page(pmd));
 	free_page((unsigned long)pmd);
 
 	return 1;

[PATCH 4.14 51/57] ALSA: hda/conexant: add a new hda codec CX11970

[Greg Kroah-Hartman]

From: bo liu <bo.liu@senarytech.com>

commit 744a11abc56405c5a106e63da30a941b6d27f737 upstream.

The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.

[ Minor coding style fix by tiwai ]

Signed-off-by: bo liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1118,6 +1118,7 @@ static int patch_conexant_auto(struct hd
 static const struct hda_device_id snd_hda_id_conexant[] = {
 	HDA_CODEC_ENTRY(0x14f11f86, "CX8070", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f12008, "CX8200", patch_conexant_auto),
+	HDA_CODEC_ENTRY(0x14f120d0, "CX11970", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f15045, "CX20549 (Venice)", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f15047, "CX20551 (Waikiki)", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f15051, "CX20561 (Hermosa)", patch_conexant_auto),

[PATCH 4.14 52/57] ALSA: hda/realtek - Fix speaker volume control on Lenovo C940

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit f86de9b1c0663b0a3ca2dcddec9aa910ff0fbf2c upstream.

Cannot adjust speaker's volume on Lenovo C940.
Applying the alc298_fixup_speaker_volume function can fix the issue.

[ Additional note: C940 has I2S amp for the speaker and this needs the
  same initialization as Dell machines.
  The patch was slightly modified so that the quirk entry is moved
  next to the corresponding Dell quirk entry. -- tiwai ]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ea25b4e5c468491aa2e9d6cb1f2fced3@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5510,6 +5510,7 @@ enum {
 	ALC221_FIXUP_HP_FRONT_MIC,
 	ALC292_FIXUP_TPT460,
 	ALC298_FIXUP_SPK_VOLUME,
+	ALC298_FIXUP_LENOVO_SPK_VOLUME,
 	ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER,
 	ALC269_FIXUP_ATIV_BOOK_8,
 	ALC221_FIXUP_HP_MIC_NO_PRESENCE,
@@ -6261,6 +6262,10 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC298_FIXUP_DELL_AIO_MIC_NO_PRESENCE,
 	},
+	[ALC298_FIXUP_LENOVO_SPK_VOLUME] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc298_fixup_speaker_volume,
+	},
 	[ALC295_FIXUP_DISABLE_DAC3] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc295_fixup_disable_dac3,
@@ -6662,6 +6667,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x3151, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3176, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3178, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
+	SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME),
 	SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
 	SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI),

[PATCH 4.14 53/57] Revert "device property: Keep secondary firmware node secondary by type"

[Greg Kroah-Hartman]

From: Bard Liao <yung-chuan.liao@linux.intel.com>

commit 47f4469970d8861bc06d2d4d45ac8200ff07c693 upstream.

While commit d5dcce0c414f ("device property: Keep secondary firmware
node secondary by type") describes everything correct in its commit
message, the change it made does the opposite and original commit
c15e1bdda436 ("device property: Fix the secondary firmware node handling
in set_primary_fwnode()") was fully correct.

Revert the former one here and improve documentation in the next patch.

Fixes: d5dcce0c414f ("device property: Keep secondary firmware node secondary by type")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -3090,7 +3090,7 @@ void set_primary_fwnode(struct device *d
 		if (fwnode_is_primary(fn)) {
 			dev->fwnode = fn->secondary;
 			if (!(parent && fn == parent->fwnode))
-				fn->secondary = ERR_PTR(-ENODEV);
+				fn->secondary = NULL;
 		} else {
 			dev->fwnode = NULL;
 		}

[PATCH 4.14 54/57] netfilter: ipset: fix shift-out-of-bounds in htable_bits()

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit 5c8193f568ae16f3242abad6518dc2ca6c8eef86 upstream.

htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds

UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 8498 Comm: syz-executor519
 Not tainted 5.10.0-rc7-next-20201208-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline]
 hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524
 ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115
 nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2345
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2399
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2432
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This patch replaces htable_bits() by simple fls(hashsize - 1) call:
it alone returns valid nbits both for round and non-round hashsizes.
It is normal to set any nbits here because it is validated inside
following htable_size() call which returns 0 for nbits>31.

Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation")
Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipset/ip_set_hash_gen.h |   20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -115,20 +115,6 @@ htable_size(u8 hbits)
 	return hsize * sizeof(struct hbucket *) + sizeof(struct htable);
 }
 
-/* Compute htable_bits from the user input parameter hashsize */
-static u8
-htable_bits(u32 hashsize)
-{
-	/* Assume that hashsize == 2^htable_bits */
-	u8 bits = fls(hashsize - 1);
-
-	if (jhash_size(bits) != hashsize)
-		/* Round up to the first 2^n value */
-		bits = fls(hashsize);
-
-	return bits;
-}
-
 #ifdef IP_SET_HASH_WITH_NETS
 #if IPSET_NET_COUNT > 1
 #define __CIDR(cidr, i)		(cidr[i])
@@ -1294,7 +1280,11 @@ IPSET_TOKEN(HTYPE, _create)(struct net *
 	if (!h)
 		return -ENOMEM;
 
-	hbits = htable_bits(hashsize);
+	/* Compute htable_bits from the user input parameter hashsize.
+	 * Assume that hashsize == 2^htable_bits,
+	 * otherwise round up to the first 2^n value.
+	 */
+	hbits = fls(hashsize - 1);
 	hsize = htable_size(hbits);
 	if (hsize == 0) {
 		kfree(h);

[PATCH 4.14 55/57] netfilter: xt_RATEEST: reject non-null terminated string from userspace

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 6cb56218ad9e580e519dcd23bfb3db08d8692e5a upstream.

syzbot reports:
detected buffer overflow in strlen
[..]
Call Trace:
 strlen include/linux/string.h:325 [inline]
 strlcpy include/linux/string.h:348 [inline]
 xt_rateest_tg_checkentry+0x2a5/0x6b0 net/netfilter/xt_RATEEST.c:143

strlcpy assumes src is a c-string. Check info->name before its used.

Reported-by: syzbot+e86f7c428c8c50db65b4@syzkaller.appspotmail.com
Fixes: 5859034d7eb8793 ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_RATEEST.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/netfilter/xt_RATEEST.c
+++ b/net/netfilter/xt_RATEEST.c
@@ -106,6 +106,9 @@ static int xt_rateest_tg_checkentry(cons
 	} cfg;
 	int ret;
 
+	if (strnlen(info->name, sizeof(est->name)) >= sizeof(est->name))
+		return -ENAMETOOLONG;
+
 	net_get_random_once(&jhash_rnd, sizeof(jhash_rnd));
 
 	mutex_lock(&xt_rateest_mutex);

[PATCH 4.14 56/57] x86/mtrr: Correct the range check before performing MTRR type lookups

[Greg Kroah-Hartman]

From: Ying-Tsun Huang <ying-tsun.huang@amd.com>

commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream.

In mtrr_type_lookup(), if the input memory address region is not in the
MTRR, over 4GB, and not over the top of memory, a write-back attribute
is returned. These condition checks are for ensuring the input memory
address region is actually mapped to the physical memory.

However, if the end address is just aligned with the top of memory,
the condition check treats the address is over the top of memory, and
write-back attribute is not returned.

And this hits in a real use case with NVDIMM: the nd_pmem module tries
to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a
NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes
very low since it is aligned with the top of memory and its memory type
is uncached-minus.

Move the input end address change to inclusive up into
mtrr_type_lookup(), before checking for the top of memory in either
mtrr_type_lookup_{variable,fixed}() helpers.

 [ bp: Massage commit message. ]

Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()")
Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mtrr/generic.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -166,9 +166,6 @@ static u8 mtrr_type_lookup_variable(u64
 	*repeat = 0;
 	*uniform = 1;
 
-	/* Make end inclusive instead of exclusive */
-	end--;
-
 	prev_match = MTRR_TYPE_INVALID;
 	for (i = 0; i < num_var_ranges; ++i) {
 		unsigned short start_state, end_state, inclusive;
@@ -260,6 +257,9 @@ u8 mtrr_type_lookup(u64 start, u64 end,
 	int repeat;
 	u64 partial_end;
 
+	/* Make end inclusive instead of exclusive */
+	end--;
+
 	if (!mtrr_state_set)
 		return MTRR_TYPE_INVALID;
 

[PATCH 4.14 57/57] KVM: x86: fix shift out of bounds reported by UBSAN

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 2f80d502d627f30257ba7e3655e71c373b7d1a5a upstream.

Since we know that e >= s, we can reassociate the left shift,
changing the shifted number from 1 to 2 in exchange for
decreasing the right hand side by 1.

Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/mmu.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -53,7 +53,7 @@ static inline u64 rsvd_bits(int s, int e
 	if (e < s)
 		return 0;
 
-	return ((1ULL << (e - s + 1)) - 1) << s;
+	return ((2ULL << (e - s)) - 1) << s;
 }
 
 void kvm_mmu_set_mmio_spte_mask(u64 mmio_mask, u64 mmio_value);

Re: [PATCH 4.14 00/57] 4.14.215-rc1 review

[Jon Hunter]

On Mon, 11 Jan 2021 14:01:19 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.215 release.
> There are 57 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.215-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    30 tests:	30 pass, 0 fail

Linux version:	4.14.215-rc1-ge3be7c59d3c1
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.14 00/57] 4.14.215-rc1 review

[Guenter Roeck]

On Mon, Jan 11, 2021 at 02:01:19PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.215 release.
> There are 57 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 404 pass: 404 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.14 00/57] 4.14.215-rc1 review

[Naresh Kamboju]

On Mon, 11 Jan 2021 at 18:36, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.215 release.
> There are 57 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.215-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.14.215-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: e3be7c59d3c1eb71d34a1927c0fbc89052ce93ca
git describe: v4.14.214-58-ge3be7c59d3c1
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.214-58-ge3be7c59d3c1


No regressions (compared to build v4.14.214)

No fixes (compared to build v4.14.214)

Ran 38840 total tests in the following environments and test suites.

Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- qemu-arm64-kasan
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- sparc
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* libhugetlbfs
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-tracing-tests
* v4l2-compliance
* fwts
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-io-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests
* perf
* kvm-unit-tests
* rcutorture

-- 
Linaro LKFT
https://lkft.linaro.org