From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiner Kallweit Subject: Re: meson-gx-mmc: 2nd patch set Date: Wed, 22 Mar 2017 20:45:41 +0100 Message-ID: <0d21de5e-768b-2389-6d3a-40059d49b492@gmail.com> References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> <82061526-2d16-5710-89a6-afbeecbf0c57@gmail.com> <54049145-cd6a-8e14-6011-e1e33f687cf5@gmail.com> <0442ae99-de48-2410-eccb-0b1f44afa249@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: Received: from mail-wm0-f68.google.com ([74.125.82.68]:35079 "EHLO mail-wm0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759234AbdCVTp5 (ORCPT ); Wed, 22 Mar 2017 15:45:57 -0400 Received: by mail-wm0-f68.google.com with SMTP id z133so12687613wmb.2 for ; Wed, 22 Mar 2017 12:45:55 -0700 (PDT) In-Reply-To: <0442ae99-de48-2410-eccb-0b1f44afa249@gmail.com> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Helmut Klein Cc: "linux-mmc@vger.kernel.org" , linux-amlogic@lists.infradead.org Am 22.03.2017 um 11:09 schrieb Helmut Klein: > On 20.03.2017 20:54, Heiner Kallweit wrote: >> Am 20.03.2017 um 14:01 schrieb Helmut Klein: >>> On 20.03.2017 13:51, Helmut Klein wrote: >>>> On 19.03.2017 23:39, Heiner Kallweit wrote: >>>>> Am 19.03.2017 um 21:46 schrieb Helmut Klein: >>>>>> On 19.03.2017 16:35, Heiner Kallweit wrote: >>>>>>> Am 19.03.2017 um 12:23 schrieb Helmut Klein: >>>>>>>> On 18.03.2017 11:24, Heiner Kallweit wrote: >>>>>>>>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>>>>>>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>>>>>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>>>>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>>>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>>>>>>>> Hallo Heiner, >>>>>>>>>>>>>> >>>>>>>>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of >>>>>>>>>>>>>> course the older set v5 1...10). >>>>>>>>>>>>>> >>>>>>>>>>>>>> The performance of the sd-card and the mmc-chip of my minimx >>>>>>>>>>>>>> is much better now. >>>>>>>>>>>>>> >>>>>>>>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>>>>>>>> >>>>>>>>>>>>>> But: >>>>>>>>>>>>>> the wifi-adapter is no longer operational. The problem starts >>>>>>>>>>>>>> with patch 3 and gets worse with patch 5. >>>>>>>>>>>>>> >>>>>>>>>>>>>> the adapter (ap6330) is attached to the sdio port of the the >>>>>>>>>>>>>> s905. (=mmc1) >>>>>>>>>>>>>> >>>>>>>>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>>>>>>>> The board I test on supports block devices only. >>>>>>>>>>>>> >>>>>>>>>>>>> Could you please share few more details: >>>>>>>>>>>>> - Drivers involved >>>>>>>>>>>>> - All syslog messages related to the device / driver >>>>>>>>>>>>> >>>>>>>>>>>>> And please set the relevant mailing lists on cc when providing >>>>>>>>>>>>> test feedback. >>>>>>>>>>>>> Others might find your feedback helpful too. >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, Heiner >>>>>>>>>>>>> >>>>>>>>>>>>>> so i think it is important to test your patch set asap on an >>>>>>>>>>>>>> officially supported board with a wifi adapter). >>>>>>>>>>>>>> >>>>>>>>>>>>>> regards >>>>>>>>>>>>>> Helmut >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as >>>>>>>>>>>> a module and loaded via /etc/modules. >>>>>>>>>>>> the driver depends on the modules brcmutil and cfg80211, which >>>>>>>>>>>> are auto loaded. >>>>>>>>>>>> >>>>>>>>>>>> my user space is debian unstable. The kernel is cross compiled >>>>>>>>>>>> on my x86-64 laptop with gcc 5.4.1 >>>>>>>>>>>> >>>>>>>>>>>> i use my own kernel configuration without an initial ramdisk. >>>>>>>>>>>> mmc, usb & ext4 drivers are compiled into the kernel >>>>>>>>>>>> >>>>>>>>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>>>>>>>> >>>>>>>>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card >>>>>>>>>>>> reader). >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> here is the filtered (mmc|brcmfmac) syslog output when only >>>>>>>>>>>> patches 1 & 2 are applied >>>>>>>>>>>> >>>>>>>>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>>>>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>>>>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware >>>>>>>>>>>> version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID >>>>>>>>>>>> 01-72f124c5 >>>>>>>>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 184 >>>>>>>>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 188 >>>>>>>>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 192 >>>>>>>>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 196 >>>>>>>>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 200 >>>>>>>>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 204 >>>>>>>>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 208 >>>>>>>>>>>> >>>>>>>>>>>> this is the output after adding patch 3 >>>>>>>>>>>> >>>>>>>>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>>>>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>>>>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer >>>>>>>>>>>> failed <<<===== >>>>>>>>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error >>>>>>>>>>>> -84 on writing 239507 membytes at 0x00000000 >>>>>>>>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle >>>>>>>>>>>> image file download failed >>>>>>>>>>>> >>>>>>>>>>>> and this is the output after adding patches 4 & 5 >>>>>>>>>>>> >>>>>>>>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 >>>>>>>>>>>> KiB <<<===== >>>>>>>>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>>>>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>>>>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>>>>>>> supported <<<===== >>>>>>>>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: >>>>>>>>>>>> brcmf_chip_attach failed! >>>>>>>>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: >>>>>>>>>>>> brcmf_sdio_probe_attach failed >>>>>>>>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>>>>>>> failed -19... >>>>>>>>>>>> >>>>>>>>>>>> regards >>>>>>>>>>>> Helmut >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Thanks a lot for the additional information. The first version >>>>>>>>>>> of the patch >>>>>>>>>>> set broke byte mode obviously (block mode is working fine). >>>>>>>>>>> >>>>>>>>>>> Before submitting a new version of the patch set: >>>>>>>>>>> Could you please apply patches 1, 2, and 4 of the patch set plus >>>>>>>>>>> the >>>>>>>>>>> following one and re-test? >>>>>>>>>>> >>>>>>>>>>> Thanks, Heiner >>>>>>>>>>> >>>>>>>>>>> --- >>>>>>>>>>> drivers/mmc/host/meson-gx-mmc.c | 222 >>>>>>>>>>> ++++++++++++++++++++++------------------ >>>>>>>>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>>>>>>>> >>>>>>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> index 6bfd3da9..ca685902 100644 >>>>>>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> @@ -121,6 +121,13 @@ >>>>>>>>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>>>>>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>>>>>>>> >>>>>>>>>>> +struct sd_emmc_desc { >>>>>>>>>>> + u32 cmd_cfg; >>>>>>>>>>> + u32 cmd_arg; >>>>>>>>>>> + u32 cmd_data; >>>>>>>>>>> + u32 cmd_resp; >>>>>>>>>>> +}; >>>>>>>>>>> + >>>>>>>>>>> struct meson_host { >>>>>>>>>>> struct device *dev; >>>>>>>>>>> struct mmc_host *mmc; >>>>>>>>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>>>>>>>> struct clk_divider cfg_div; >>>>>>>>>>> struct clk *cfg_div_clk; >>>>>>>>>>> >>>>>>>>>>> - unsigned int bounce_buf_size; >>>>>>>>>>> - void *bounce_buf; >>>>>>>>>>> - dma_addr_t bounce_dma_addr; >>>>>>>>>>> + struct sd_emmc_desc *descs; >>>>>>>>>>> + dma_addr_t descs_dma_addr; >>>>>>>>>>> >>>>>>>>>>> bool vqmmc_enabled; >>>>>>>>>>> }; >>>>>>>>>>> >>>>>>>>>>> -struct sd_emmc_desc { >>>>>>>>>>> - u32 cmd_cfg; >>>>>>>>>>> - u32 cmd_arg; >>>>>>>>>>> - u32 cmd_data; >>>>>>>>>>> - u32 cmd_resp; >>>>>>>>>>> -}; >>>>>>>>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>>>>>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>>>>>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>>>>>>>> @@ -185,6 +185,36 @@ static struct mmc_command >>>>>>>>>>> *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>>>>>>>> return NULL; >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct >>>>>>>>>>> mmc_data *data) >>>>>>>>>>> +{ >>>>>>>>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : >>>>>>>>>>> DMA_FROM_DEVICE; >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_request *mrq) >>>>>>>>>>> +{ >>>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>>> + >>>>>>>>>>> + if (!data) >>>>>>>>>>> + return; >>>>>>>>>>> + >>>>>>>>>>> + data->host_cookie = true; >>>>>>>>>>> + >>>>>>>>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, >>>>>>>>>>> data->sg_len, >>>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>>> + if (!data->sg_count) >>>>>>>>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_request *mrq, >>>>>>>>>>> + int err) >>>>>>>>>>> +{ >>>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>>> + >>>>>>>>>>> + if (data && data->sg_count) >>>>>>>>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned >>>>>>>>>>> long clk_rate) >>>>>>>>>>> { >>>>>>>>>>> struct mmc_host *mmc = host->mmc; >>>>>>>>>>> @@ -434,104 +464,102 @@ static void >>>>>>>>>>> meson_mmc_request_done(struct mmc_host *mmc, >>>>>>>>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_command *cmd) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>>>>>>>> - u32 cfg; >>>>>>>>>>> - u8 blk_len, cmd_cfg_timeout; >>>>>>>>>>> - unsigned int xfer_bytes = 0; >>>>>>>>>>> + struct sd_emmc_desc *desc = host->descs; >>>>>>>>>>> + struct mmc_data *data = cmd->data; >>>>>>>>>>> + struct scatterlist *sg; >>>>>>>>>>> + u32 cfg, cmd_cfg = 0; >>>>>>>>>>> + u8 blk_len; >>>>>>>>>>> + int i; >>>>>>>>>>> >>>>>>>>>>> - /* Setup descriptors */ >>>>>>>>>>> dma_rmb(); >>>>>>>>>>> - desc = &desc_tmp; >>>>>>>>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>>>>>>>> >>>>>>>>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>>> - desc->cmd_arg = cmd->arg; >>>>>>>>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>>> >>>>>>>>>>> /* Response */ >>>>>>>>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>>>>>>>> if (cmd->flags & MMC_RSP_136) >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>>> - desc->cmd_resp = 0; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>>> >>>>>>>>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>>> >>>>>>>>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>>> } else { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> - /* data? */ >>>>>>>>>>> - if (cmd->data) { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>>> - if (cmd->data->blocks > 1) { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>>> + if (data) { >>>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>>> + >>>>>>>>>>> + if (data->blocks > 1) { >>>>>>>>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>>> >>>>>>>>>>> /* check if block-size matches, if not update */ >>>>>>>>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>>>>>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << >>>>>>>>>>> CFG_BLK_LEN_SHIFT); >>>>>>>>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>>>>>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>>>>>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> >>>>>>>>>>> %d\n", >>>>>>>>>>> - __func__, blk_len, >>>>>>>>>>> - ilog2(cmd->data->blksz)); >>>>>>>>>>> - blk_len = ilog2(cmd->data->blksz); >>>>>>>>>>> + if (blk_len != ilog2(data->blksz)) { >>>>>>>>>>> + dev_dbg(host->dev, >>>>>>>>>>> + "%s: update blk_len %d -> %d\n", >>>>>>>>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>>>>>>>> + blk_len = ilog2(data->blksz); >>>>>>>>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>>>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>>>>>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>>>>>>>> } >>>>>>>>>>> - } else { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> - cmd->data->bytes_xfered = 0; >>>>>>>>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>>>>>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>>>>>>>> - dma_wmb(); >>>>>>>>>>> - } else { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>>>>>>>> - } >>>>>>>>>>> + data->bytes_xfered = 0; >>>>>>>>>>> + if (data->flags & MMC_DATA_WRITE) >>>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>>> >>>>>>>>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>>>>>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>>> + >>>>>>>>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>>>>>> + unsigned int len = sg_dma_len(sg); >>>>>>>>>>> + >>>>>>>>>>> + if (data->blocks > 1) >>>>>>>>>>> + len /= data->blksz; >>>>>>>>>>> + >>>>>>>>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>>>>>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>>>>>>>> + CMD_CFG_LENGTH_SHIFT; >>>>>>>>>>> + if (i > 0) >>>>>>>>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>>>>>>>> + desc[i].cmd_arg = cmd->arg; >>>>>>>>>>> + desc[i].cmd_resp = 0; >>>>>>>>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>>>>>>>> + } >>>>>>>>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>>> >>>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>>>>>>>> } else { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << >>>>>>>>>>> CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>>>>>>>> + desc[0].cmd_arg = cmd->arg; >>>>>>>>>>> + desc[0].cmd_resp = 0; >>>>>>>>>>> + desc[0].cmd_data = 0; >>>>>>>>>>> } >>>>>>>>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>>>>>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>>> >>>>>>>>>>> host->cmd = cmd; >>>>>>>>>>> >>>>>>>>>>> - /* Last descriptor */ >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>>>>>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>>>>>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>>>>>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>>>>>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>>>>>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>>>>>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> static void meson_mmc_request(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_request *mrq) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>>> + bool needs_pre_post_req = mrq->data && >>>>>>>>>>> !mrq->data->host_cookie; >>>>>>>>>>> + >>>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>>> + meson_mmc_pre_req(mmc, mrq); >>>>>>>>>>> >>>>>>>>>>> /* Stop execution */ >>>>>>>>>>> writel(0, host->regs + SD_EMMC_START); >>>>>>>>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct >>>>>>>>>>> mmc_host *mmc, struct mmc_request *mrq) >>>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>>>>>>>> else >>>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>>>>>>>> + >>>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_command *cmd) >>>>>>>>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>>> void *dev_id) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>>> struct mmc_command *cmd; >>>>>>>>>>> + struct mmc_data *data; >>>>>>>>>>> u32 irq_en, status, raw_status; >>>>>>>>>>> irqreturn_t ret = IRQ_HANDLED; >>>>>>>>>>> >>>>>>>>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>>> void *dev_id) >>>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>>> return IRQ_NONE; >>>>>>>>>>> >>>>>>>>>>> + data = cmd->data; >>>>>>>>>>> + >>>>>>>>>>> spin_lock(&host->lock); >>>>>>>>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>>>>>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>>> void *dev_id) >>>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>>>>>>>> cmd->error = -ETIMEDOUT; >>>>>>>>>>> } >>>>>>>>>>> + >>>>>>>>>>> + if (data && !cmd->error) >>>>>>>>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>>>>>>>> + >>>>>>>>>>> if (status & IRQ_SDIO) >>>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>>>>>>>> >>>>>>>>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>>>>>>>> - ret = IRQ_WAKE_THREAD; >>>>>>>>>>> - else { >>>>>>>>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>>>>>>>> + if (meson_mmc_get_next_command(cmd)) >>>>>>>>>>> + ret = IRQ_WAKE_THREAD; >>>>>>>>>>> + } else { >>>>>>>>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC >>>>>>>>>>> CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>>>>>>>> status, cmd->opcode, cmd->arg, >>>>>>>>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>>>>>>>> @@ -642,26 +681,12 @@ static irqreturn_t >>>>>>>>>>> meson_mmc_irq_thread(int irq, void *dev_id) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>>>>>>>> - struct mmc_data *data; >>>>>>>>>>> - unsigned int xfer_bytes; >>>>>>>>>>> >>>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>>> return IRQ_NONE; >>>>>>>>>>> >>>>>>>>>>> - data = cmd->data; >>>>>>>>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>>>>>>>> - xfer_bytes = data->blksz * data->blocks; >>>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>>> - data->bytes_xfered = xfer_bytes; >>>>>>>>>>> - } >>>>>>>>>>> - >>>>>>>>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>>>>>>>> - if (next_cmd) >>>>>>>>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>>> - else >>>>>>>>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>>>>>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>>> >>>>>>>>>>> return IRQ_HANDLED; >>>>>>>>>>> } >>>>>>>>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops >>>>>>>>>>> meson_mmc_ops = { >>>>>>>>>>> .request = meson_mmc_request, >>>>>>>>>>> .set_ios = meson_mmc_set_ios, >>>>>>>>>>> .get_cd = meson_mmc_get_cd, >>>>>>>>>>> + .pre_req = meson_mmc_pre_req, >>>>>>>>>>> + .post_req = meson_mmc_post_req, >>>>>>>>>>> }; >>>>>>>>>>> >>>>>>>>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>>>>>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct >>>>>>>>>>> platform_device *pdev) >>>>>>>>>>> >>>>>>>>>>> mmc->caps |= MMC_CAP_CMD23; >>>>>>>>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>>>>>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>>> - >>>>>>>>>>> - /* data bounce buffer */ >>>>>>>>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>>>>>>>> - host->bounce_buf = >>>>>>>>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>>>>>>>> - if (host->bounce_buf == NULL) { >>>>>>>>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce >>>>>>>>>>> buffer.\n"); >>>>>>>>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>>>>>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>>>>>>>> + >>>>>>>>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>>>>>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>>>>>>>> + if (!host->descs) { >>>>>>>>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer >>>>>>>>>>> failed\n"); >>>>>>>>>>> ret = -ENOMEM; >>>>>>>>>>> goto err_div_clk; >>>>>>>>>>> } >>>>>>>>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct >>>>>>>>>>> platform_device *pdev) >>>>>>>>>>> /* disable interrupts */ >>>>>>>>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>>> >>>>>>>>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>>>>>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>>>>>>>> + host->descs_dma_addr); >>>>>>>>>>> >>>>>>>>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>>>>>>>> clk_disable_unprepare(host->core_clk); >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> compared to the patches 1...5 there is absolutely no change to >>>>>>>>>> patches 1, 2, 4 and the above. Neither syslog nor performance. >>>>>>>>>> >>>>>>>>> Thanks for re-testing. I have a little bit of a hard time to >>>>>>>>> understand why SD and eMMC mode >>>>>>>>> are working but SDIO (at least with brcfmac) is not. Especially as >>>>>>>>> I don't have HW to test SDIO mode on. >>>>>>>>> >>>>>>>>> After patches 1, 2, 4 the system is still working normally? >>>>>>>>> And would it be possible for you to compile a DEBUG kernel and >>>>>>>>> post the mmc/brcmfmac related output? >>>>>>>>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>>>>>>>> >>>>>>>>> Last but not least, could you please post /proc/interrupts ? This >>>>>>>>> would give an idea whether any SDIO >>>>>>>>> or just specific ones fail. >>>>>>>>> >>>>>>>>> Thanks, Heiner >>>>>>>>> >>>>>>>>>> regards >>>>>>>>>> Helmut >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> i enabled the debug flags for mmc and brcmfmac in the kernel >>>>>>>> configuration. >>>>>>>> For the test i also changed meson-gx-mmc from built-in to module. >>>>>>>> This resulted in a different order of the mmc devices. The >>>>>>>> sdio/wifi is now mmc0 and not mmc1 >>>>>>>> >>>>>>>> Without your new patch the wifi adapter works normally. >>>>>>>> >>>>>>>> The debug info was produced with following commad sequence >>>>>>>> dmesg -n 8 >>>>>>>> dmesg -D >>>>>>>> logger "loading meson-gx-mmc...." >>>>>>>> modprobe meson-gx-mmc >>>>>>>> sleep 1 >>>>>>>> logger "loading brcmfmac" >>>>>>>> modprobe brcmfmac >>>>>>>> logger "modules loaded" >>>>>>>> sleep 1 >>>>>>>> cp /var/log/syslog ~/syslog >>>>>>>> cp /proc/interrupts ~/interrupts >>>>>>>> >>>>>>>> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >>>>>>>> >>>>>>>> because of the length of the files i removed most lines of the >>>>>>>> loading of meson-gx-mmc >>>>>>>> >>>>>>>> unhandled interrupts: independent of the number of applied patches >>>>>>>> i've always got 11 of them. >>>>>>>> Only the timings differed with the applied patches >>>>>>>> >>>>>>>> the is the log for applied patches 1, 2, 4 & the new one >>>>>>>> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>>> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>>> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>>> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>>> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>>> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>>> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>>> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >>>>>>>> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>>> 400000 -> 52000000 >>>>>>>> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>>> 52000000 != actual rate 50000000 >>>>>>>> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>>> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>>> loading brcmfmac >>>>>>>> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data >>>>>>>> available. >>>>>>>> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>>> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>>> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>>> brcmf_sdiod_probe... >>>>>>>> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >>>>>>>> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>>> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>>> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >>>>>>>> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >>>>>>>> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>>> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000a, nbytes=1 >>>>>>>> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>>> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000b, nbytes=1 >>>>>>>> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>>> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000c, nbytes=1 >>>>>>>> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>>> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x08000, nbytes=4 >>>>>>>> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>>> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>>> 1000 ms nsac 0 >>>>>>>> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731881] mmc0: 4 bytes transferred: 0 >>>>>>>> [ 48.731887] brcmfmac: brcmf_sdiod_regrl >>>>>>>> data:0x00000000 <<<<===== wrong! >>>>>>>> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >>>>>>>> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>>> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>>> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x21 >>>>>>>> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >>>>>>>> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, >>>>>>>> data:0x00 >>>>>>>> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000f, nbytes=1 >>>>>>>> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >>>>>>>> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>>> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x08000, nbytes=4 >>>>>>>> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>>> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>>> 1000 ms nsac 0 >>>>>>>> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732235] mmc0: 4 bytes transferred: 0 >>>>>>>> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>>>>> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: >>>>>>>> BCM0, rev=0 >>>>>>>> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>>> supported >>>>>>>> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: >>>>>>>> brcmf_chip_attach failed! >>>>>>>> [ 48.732273] brcmfmac: brcmf_sdio_probe: >>>>>>>> brcmf_sdio_probe_attach failed >>>>>>>> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >>>>>>>> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering >>>>>>>> oob=0 sd=0 >>>>>>>> [ 48.732290] brcmfmac: brcmf_detach Enter >>>>>>>> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >>>>>>>> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >>>>>>>> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>>> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >>>>>>>> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >>>>>>>> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >>>>>>>> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >>>>>>>> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>>> failed -19... >>>>>>>> >>>>>>>> this is the debug data for applied patches 1,2 & 4 (left only few >>>>>>>> lines after the first CMD53) >>>>>>>> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>>> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>>> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>>> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>>> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>>> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>>> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>>> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >>>>>>>> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>>> 400000 -> 52000000 >>>>>>>> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>>> 52000000 != actual rate 50000000 >>>>>>>> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>>> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>>> loading brcmfmac >>>>>>>> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data >>>>>>>> available. >>>>>>>> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>>> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>>> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>>> brcmf_sdiod_probe... >>>>>>>> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >>>>>>>> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>>> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>>> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >>>>>>>> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >>>>>>>> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>>> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000a, nbytes=1 >>>>>>>> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>>> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000b, nbytes=1 >>>>>>>> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>>> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000c, nbytes=1 >>>>>>>> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>>> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x08000, nbytes=4 >>>>>>>> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>>> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>>> 1000 ms nsac 0 >>>>>>>> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796829] mmc0: 4 bytes transferred: 0 >>>>>>>> [ 53.796836] brcmfmac: brcmf_sdiod_regrl >>>>>>>> data:0x16044330 <<<<<====== ok >>>>>>>> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >>>>>>>> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>>> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> >>>>>>>> if you need more data: just ask ;-) >>>>>>>> >>>>>>> Thanks a lot for the logs. So the first read returns 0 instead of >>>>>>> the actual register value. >>>>>>> Could you please apply the following on top of 1, 2, 4, new one and >>>>>>> send the log? >>>>>>> I hope the two debug messages bring me closer to the root cause of >>>>>>> the issue. >>>>>>> >>>>>>> Rgds, Heiner >>>>>>> >>>>>>> >>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> index 3b3ddf3e..d6d2d1a1 100644 >>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>>>>> *mmc, struct mmc_command *cmd) >>>>>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>> unsigned int len = sg_dma_len(sg); >>>>>>> >>>>>>> + if (cmd->opcode == 53) >>>>>>> + dev_info(host->info, "cmd 53: idx %d len %u\n", i, >>>>>>> len); >>>>>>> + >>>>>>> if (data->blocks > 1) >>>>>>> len /= data->blksz; >>>>>>> >>>>>>> @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>>>>> *dev_id) >>>>>>> >>>>>>> meson_mmc_read_resp(host->mmc, cmd); >>>>>>> >>>>>>> + if (cmd->opcode == 53) >>>>>>> + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", >>>>>>> host->descs[0].cmd_data); >>>>>>> + >>>>>>> cmd->error = 0; >>>>>>> if (status & IRQ_RXD_ERR_MASK) { >>>>>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>>>>> >>>>>> >>>>>> here is the output: >>>>>> [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>> addr=0x08000, nbytes=4 >>>>>> [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>> [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms >>>>>> nsac 0 >>>>>> [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 >>>>>> [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 >>>>>> [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 >>>>>> 00000000 >>>>>> [ 107.510541] mmc0: 4 bytes transferred: 0 >>>>>> [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>>> >>>>>> Helmut >>>>>> >>>>>> >>>>> Weird .. Everything looks ok so far. I don't see a reason why this >>>>> small read DMA returns >>>>> zeroed bytes only whilst bigger ones in SD/eMMC work perfectly fine. >>>>> >>>>> OK, one last attempt before I have to think about a better way to >>>>> tackle this issue. >>>>> >>>>> Could you please replace the last logging extension patch with this one? >>>>> (I just added a memory barrier to be sure to read the actual value.) >>>>> >>>>> Thanks, Heiner >>>>> >>>>> >>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>> index ca685902..5b511944 100644 >>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>> @@ -523,6 +523,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>>> *mmc, struct mmc_command *cmd) >>>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>>> unsigned int len = sg_dma_len(sg); >>>>> >>>>> + if (cmd->opcode == 53) >>>>> + pr_info("sg: idx %d len %u\n", i, len); >>>>> + >>>>> if (data->blocks > 1) >>>>> len /= data->blksz; >>>>> >>>>> @@ -619,6 +622,11 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>>> *dev_id) >>>>> >>>>> meson_mmc_read_resp(host->mmc, cmd); >>>>> >>>>> + if (cmd->opcode == 53) { >>>>> + dma_rmb(); >>>>> + pr_info("cmd 53 cmd_data0: %08x\n", host->descs[0].cmd_data); >>>>> + } >>>>> + >>>>> cmd->error = 0; >>>>> if (status & IRQ_RXD_ERR_MASK) { >>>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>>> >>>> >>>> the output is not really different (for the 2 cmd53) >>>> [ 37.113577] sg: idx 0 len 4 >>>> [ 37.113595] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>>> [ 37.114016] sg: idx 0 len 4 >>>> [ 37.114034] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>>> >>>> Helmut >>> >>> >>> I've added my own debugging code to both variations of the driver. but without a positiv result >>> >>> here are the patches >>> >>> for the fully operational version >>> >>> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-18 15:22:31.000000000 +0100 >>> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 13:02:05.254762191 +0100 >>> @@ -468,6 +468,9 @@ static void meson_mmc_start_cmd(struct m >>> >>> /* data? */ >>> if (cmd->data) { >>> + >>> + dev_dbg(host->dev, "DBG data"); >>> + >>> desc->cmd_cfg |= CMD_CFG_DATA_IO; >>> if (cmd->data->blocks > 1) { >>> desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>> @@ -526,6 +529,10 @@ static void meson_mmc_start_cmd(struct m >>> writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>> writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>> wmb(); /* ensure descriptor is written before kicked */ >>> + >>> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >>> + desc->cmd_cfg, desc->cmd_arg, desc->cmd_resp); >>> + >>> writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>> } >>> >>> @@ -576,6 +583,8 @@ static irqreturn_t meson_mmc_irq(int irq >>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>> status = raw_status & irq_en; >>> >>> + dev_dbg(host->dev, "DBG status 0x%08x", status); >>> + >>> if (!status) { >>> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >>> raw_status, irq_en); >>> >>> and this is for the version with the sdio problem >>> >>> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:50:32.956474080 +0100 >>> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:57:27.185837225 +0100 >>> @@ -493,6 +493,9 @@ static void meson_mmc_start_cmd(struct m >>> } >>> >>> if (data) { >>> + >>> + dev_dbg(host->dev, "DBG data"); >>> + >>> cmd_cfg |= CMD_CFG_DATA_IO; >>> >>> if (data->blocks > 1) { >>> @@ -549,6 +552,10 @@ static void meson_mmc_start_cmd(struct m >>> host->cmd = cmd; >>> >>> wmb(); /* ensure descriptor is written before kicked */ >>> + >>> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >>> + desc[0].cmd_cfg, desc[0].cmd_arg, desc[0].cmd_resp); >>> + >>> cfg = host->descs_dma_addr | START_DESC_BUSY; >>> writel(cfg, host->regs + SD_EMMC_START); >>> } >>> @@ -610,6 +617,8 @@ static irqreturn_t meson_mmc_irq(int irq >>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>> status = raw_status & irq_en; >>> >>> + dev_dbg(host->dev, "DBG status 0x%08x", status); >>> + >>> if (!status) { >>> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >>> raw_status, irq_en); >>> >>> the filtered logs are identical up and including the 2nd cmd53. >>> >>> Helmut >>> >>> >> Thanks. Really appreciate your support. Meanwhile I think there must be a bug >> either in the DMA subsystem or there's a hw bug causing issues with very small >> transfers. That's the only difference between SD/eMMC and SDIO on that level: >> SD/eMMC always transfers 512 byte blocks whilst SDIO also uses very small >> transfers. >> >> For up to 4 bytes the chip supports an alternative transfer method. >> Let's try this as workaround. >> >> Could you please apply: >> patches 1, 2, 4 + the updated bigger patch I sent via mail + the following: >> >> >> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >> index 4f9fafd3..cf9be13f 100644 >> --- a/drivers/mmc/host/meson-gx-mmc.c >> +++ b/drivers/mmc/host/meson-gx-mmc.c >> @@ -185,6 +185,12 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) >> return NULL; >> } >> >> +static bool meson_mmc_small_read(const struct mmc_data *data) >> +{ >> + return data && data->blocks <= 1 && data->blksz <= 4 && >> + data->flags & MMC_DATA_READ; >> +} >> + >> static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) >> { >> return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; >> @@ -208,11 +214,22 @@ static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) >> static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, >> int err) >> { >> + struct meson_host *host = mmc_priv(mmc); >> struct mmc_data *data = mrq->data; >> >> if (data && data->sg_count) >> dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >> meson_mmc_get_data_dir(data)); >> + >> + if (meson_mmc_small_read(data)) { >> + int cnt; >> + >> + dma_rmb(); >> + cnt = sg_copy_from_buffer(data->sg, data->sg_len, >> + &host->descs[0].cmd_data, data->blksz); >> + if (cnt != data->blksz) >> + dev_err(host->dev, "error copying to scatterlist\n"); >> + } >> } >> >> static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) >> @@ -493,6 +510,8 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >> } >> >> if (data) { >> + bool small_read = meson_mmc_small_read(data); >> + >> cmd_cfg |= CMD_CFG_DATA_IO; >> >> if (data->blocks > 1) { >> @@ -513,6 +532,14 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >> } >> } >> >> + /* >> + * workaround for most likely hw bug >> + * if up to 4 bytes receive them in the descriptor instead >> + * of using dma_map_sg/dma_unmap_sg >> + */ >> + if (small_read) >> + cmd_cfg |= CMD_CFG_DATA_NUM; >> + >> data->bytes_xfered = 0; >> if (data->flags & MMC_DATA_WRITE) >> cmd_cfg |= CMD_CFG_DATA_WR; >> @@ -533,7 +560,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >> desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >> desc[i].cmd_arg = cmd->arg; >> desc[i].cmd_resp = 0; >> - desc[i].cmd_data = sg_dma_address(sg); >> + desc[i].cmd_data = small_read ? 0 : sg_dma_address(sg); >> } >> desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >> >> > > Hallo Heiner, > > here is the result: > [ 44.375027] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 > [ 44.375034] mmc0: starting CMD53 arg 15000004 flags 000001b5 > [ 44.375037] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 > [ 44.375047] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 > [ 44.375050] mmc0: 4 bytes transferred: 0 > [ 44.375057] brcmfmac: brcmf_sdiod_regrl data:0x16044330 > [ 44.375059] brcmfmac: F1 signature read @0x18000000=0x16044330 > > [ 44.375296] mmc0: starting CMD53 arg 15000004 flags 000001b5 > [ 44.375299] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 > [ 44.375309] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 > [ 44.375311] mmc0: 4 bytes transferred: 0 > [ 44.375323] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<< expected 0x16044330 > [ 44.375327] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 > [ 44.375330] brcmfmac: brcmf_chip_recognition: SB chip is not supported > [ 44.375333] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! > [ 44.375337] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed > [ 44.375339] brcmfmac: brcmf_sdio_remove Enter > > the 1. cmd53 returned the correct data. > the second one failed. 0x0 instead of 0x16044330 (the same value as in the 1. cmd53) > Thanks again for your testing efforts. Then I'll do the following: I will keep the old single-descriptor / bounce-buffer mode for smaller transfers and use descriptor-chain mode only for bigger multi-block transfers. Before these functional changes I think there will be one more round with smaller refactorings. Thanks, Heiner > Helmut > From mboxrd@z Thu Jan 1 00:00:00 1970 From: hkallweit1@gmail.com (Heiner Kallweit) Date: Wed, 22 Mar 2017 20:45:41 +0100 Subject: meson-gx-mmc: 2nd patch set In-Reply-To: <0442ae99-de48-2410-eccb-0b1f44afa249@gmail.com> References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> <82061526-2d16-5710-89a6-afbeecbf0c57@gmail.com> <54049145-cd6a-8e14-6011-e1e33f687cf5@gmail.com> <0442ae99-de48-2410-eccb-0b1f44afa249@gmail.com> Message-ID: <0d21de5e-768b-2389-6d3a-40059d49b492@gmail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Am 22.03.2017 um 11:09 schrieb Helmut Klein: > On 20.03.2017 20:54, Heiner Kallweit wrote: >> Am 20.03.2017 um 14:01 schrieb Helmut Klein: >>> On 20.03.2017 13:51, Helmut Klein wrote: >>>> On 19.03.2017 23:39, Heiner Kallweit wrote: >>>>> Am 19.03.2017 um 21:46 schrieb Helmut Klein: >>>>>> On 19.03.2017 16:35, Heiner Kallweit wrote: >>>>>>> Am 19.03.2017 um 12:23 schrieb Helmut Klein: >>>>>>>> On 18.03.2017 11:24, Heiner Kallweit wrote: >>>>>>>>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>>>>>>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>>>>>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>>>>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>>>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>>>>>>>> Hallo Heiner, >>>>>>>>>>>>>> >>>>>>>>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of >>>>>>>>>>>>>> course the older set v5 1...10). >>>>>>>>>>>>>> >>>>>>>>>>>>>> The performance of the sd-card and the mmc-chip of my minimx >>>>>>>>>>>>>> is much better now. >>>>>>>>>>>>>> >>>>>>>>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>>>>>>>> >>>>>>>>>>>>>> But: >>>>>>>>>>>>>> the wifi-adapter is no longer operational. The problem starts >>>>>>>>>>>>>> with patch 3 and gets worse with patch 5. >>>>>>>>>>>>>> >>>>>>>>>>>>>> the adapter (ap6330) is attached to the sdio port of the the >>>>>>>>>>>>>> s905. (=mmc1) >>>>>>>>>>>>>> >>>>>>>>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>>>>>>>> The board I test on supports block devices only. >>>>>>>>>>>>> >>>>>>>>>>>>> Could you please share few more details: >>>>>>>>>>>>> - Drivers involved >>>>>>>>>>>>> - All syslog messages related to the device / driver >>>>>>>>>>>>> >>>>>>>>>>>>> And please set the relevant mailing lists on cc when providing >>>>>>>>>>>>> test feedback. >>>>>>>>>>>>> Others might find your feedback helpful too. >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, Heiner >>>>>>>>>>>>> >>>>>>>>>>>>>> so i think it is important to test your patch set asap on an >>>>>>>>>>>>>> officially supported board with a wifi adapter). >>>>>>>>>>>>>> >>>>>>>>>>>>>> regards >>>>>>>>>>>>>> Helmut >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as >>>>>>>>>>>> a module and loaded via /etc/modules. >>>>>>>>>>>> the driver depends on the modules brcmutil and cfg80211, which >>>>>>>>>>>> are auto loaded. >>>>>>>>>>>> >>>>>>>>>>>> my user space is debian unstable. The kernel is cross compiled >>>>>>>>>>>> on my x86-64 laptop with gcc 5.4.1 >>>>>>>>>>>> >>>>>>>>>>>> i use my own kernel configuration without an initial ramdisk. >>>>>>>>>>>> mmc, usb & ext4 drivers are compiled into the kernel >>>>>>>>>>>> >>>>>>>>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>>>>>>>> >>>>>>>>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card >>>>>>>>>>>> reader). >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> here is the filtered (mmc|brcmfmac) syslog output when only >>>>>>>>>>>> patches 1 & 2 are applied >>>>>>>>>>>> >>>>>>>>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>>>>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>>>>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware >>>>>>>>>>>> version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID >>>>>>>>>>>> 01-72f124c5 >>>>>>>>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 184 >>>>>>>>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 188 >>>>>>>>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 192 >>>>>>>>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 196 >>>>>>>>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 200 >>>>>>>>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a >>>>>>>>>>>> ISO3166 code (0x30 0x30) >>>>>>>>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 204 >>>>>>>>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring >>>>>>>>>>>> unexpected firmware channel 208 >>>>>>>>>>>> >>>>>>>>>>>> this is the output after adding patch 3 >>>>>>>>>>>> >>>>>>>>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>>>>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>>>>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer >>>>>>>>>>>> failed <<<===== >>>>>>>>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error >>>>>>>>>>>> -84 on writing 239507 membytes at 0x00000000 >>>>>>>>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle >>>>>>>>>>>> image file download failed >>>>>>>>>>>> >>>>>>>>>>>> and this is the output after adding patches 4 & 5 >>>>>>>>>>>> >>>>>>>>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>>>>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 >>>>>>>>>>>> KiB <<<===== >>>>>>>>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>>>>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>>>>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>>>>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>>>>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>>>>>>> supported <<<===== >>>>>>>>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: >>>>>>>>>>>> brcmf_chip_attach failed! >>>>>>>>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: >>>>>>>>>>>> brcmf_sdio_probe_attach failed >>>>>>>>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>>>>>>> failed -19... >>>>>>>>>>>> >>>>>>>>>>>> regards >>>>>>>>>>>> Helmut >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Thanks a lot for the additional information. The first version >>>>>>>>>>> of the patch >>>>>>>>>>> set broke byte mode obviously (block mode is working fine). >>>>>>>>>>> >>>>>>>>>>> Before submitting a new version of the patch set: >>>>>>>>>>> Could you please apply patches 1, 2, and 4 of the patch set plus >>>>>>>>>>> the >>>>>>>>>>> following one and re-test? >>>>>>>>>>> >>>>>>>>>>> Thanks, Heiner >>>>>>>>>>> >>>>>>>>>>> --- >>>>>>>>>>> drivers/mmc/host/meson-gx-mmc.c | 222 >>>>>>>>>>> ++++++++++++++++++++++------------------ >>>>>>>>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>>>>>>>> >>>>>>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> index 6bfd3da9..ca685902 100644 >>>>>>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>>>>>> @@ -121,6 +121,13 @@ >>>>>>>>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>>>>>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>>>>>>>> >>>>>>>>>>> +struct sd_emmc_desc { >>>>>>>>>>> + u32 cmd_cfg; >>>>>>>>>>> + u32 cmd_arg; >>>>>>>>>>> + u32 cmd_data; >>>>>>>>>>> + u32 cmd_resp; >>>>>>>>>>> +}; >>>>>>>>>>> + >>>>>>>>>>> struct meson_host { >>>>>>>>>>> struct device *dev; >>>>>>>>>>> struct mmc_host *mmc; >>>>>>>>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>>>>>>>> struct clk_divider cfg_div; >>>>>>>>>>> struct clk *cfg_div_clk; >>>>>>>>>>> >>>>>>>>>>> - unsigned int bounce_buf_size; >>>>>>>>>>> - void *bounce_buf; >>>>>>>>>>> - dma_addr_t bounce_dma_addr; >>>>>>>>>>> + struct sd_emmc_desc *descs; >>>>>>>>>>> + dma_addr_t descs_dma_addr; >>>>>>>>>>> >>>>>>>>>>> bool vqmmc_enabled; >>>>>>>>>>> }; >>>>>>>>>>> >>>>>>>>>>> -struct sd_emmc_desc { >>>>>>>>>>> - u32 cmd_cfg; >>>>>>>>>>> - u32 cmd_arg; >>>>>>>>>>> - u32 cmd_data; >>>>>>>>>>> - u32 cmd_resp; >>>>>>>>>>> -}; >>>>>>>>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>>>>>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>>>>>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>>>>>>>> @@ -185,6 +185,36 @@ static struct mmc_command >>>>>>>>>>> *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>>>>>>>> return NULL; >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct >>>>>>>>>>> mmc_data *data) >>>>>>>>>>> +{ >>>>>>>>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : >>>>>>>>>>> DMA_FROM_DEVICE; >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_request *mrq) >>>>>>>>>>> +{ >>>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>>> + >>>>>>>>>>> + if (!data) >>>>>>>>>>> + return; >>>>>>>>>>> + >>>>>>>>>>> + data->host_cookie = true; >>>>>>>>>>> + >>>>>>>>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, >>>>>>>>>>> data->sg_len, >>>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>>> + if (!data->sg_count) >>>>>>>>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_request *mrq, >>>>>>>>>>> + int err) >>>>>>>>>>> +{ >>>>>>>>>>> + struct mmc_data *data = mrq->data; >>>>>>>>>>> + >>>>>>>>>>> + if (data && data->sg_count) >>>>>>>>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned >>>>>>>>>>> long clk_rate) >>>>>>>>>>> { >>>>>>>>>>> struct mmc_host *mmc = host->mmc; >>>>>>>>>>> @@ -434,104 +464,102 @@ static void >>>>>>>>>>> meson_mmc_request_done(struct mmc_host *mmc, >>>>>>>>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_command *cmd) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>>>>>>>> - u32 cfg; >>>>>>>>>>> - u8 blk_len, cmd_cfg_timeout; >>>>>>>>>>> - unsigned int xfer_bytes = 0; >>>>>>>>>>> + struct sd_emmc_desc *desc = host->descs; >>>>>>>>>>> + struct mmc_data *data = cmd->data; >>>>>>>>>>> + struct scatterlist *sg; >>>>>>>>>>> + u32 cfg, cmd_cfg = 0; >>>>>>>>>>> + u8 blk_len; >>>>>>>>>>> + int i; >>>>>>>>>>> >>>>>>>>>>> - /* Setup descriptors */ >>>>>>>>>>> dma_rmb(); >>>>>>>>>>> - desc = &desc_tmp; >>>>>>>>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>>>>>>>> >>>>>>>>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>>> - desc->cmd_arg = cmd->arg; >>>>>>>>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>>>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>>>>>> >>>>>>>>>>> /* Response */ >>>>>>>>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>>>>>>>> if (cmd->flags & MMC_RSP_136) >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>>> - desc->cmd_resp = 0; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>>>>>> >>>>>>>>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>>>>>> >>>>>>>>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>>>>>>>> } else { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> - /* data? */ >>>>>>>>>>> - if (cmd->data) { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>>> - if (cmd->data->blocks > 1) { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>>> + if (data) { >>>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>>>>>> + >>>>>>>>>>> + if (data->blocks > 1) { >>>>>>>>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>>>>>> >>>>>>>>>>> /* check if block-size matches, if not update */ >>>>>>>>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>>>>>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << >>>>>>>>>>> CFG_BLK_LEN_SHIFT); >>>>>>>>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>>>>>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>>>>>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> >>>>>>>>>>> %d\n", >>>>>>>>>>> - __func__, blk_len, >>>>>>>>>>> - ilog2(cmd->data->blksz)); >>>>>>>>>>> - blk_len = ilog2(cmd->data->blksz); >>>>>>>>>>> + if (blk_len != ilog2(data->blksz)) { >>>>>>>>>>> + dev_dbg(host->dev, >>>>>>>>>>> + "%s: update blk_len %d -> %d\n", >>>>>>>>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>>>>>>>> + blk_len = ilog2(data->blksz); >>>>>>>>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>>>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>>>>>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>>>>>>>> } >>>>>>>>>>> - } else { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>>>>>>>> - desc->cmd_cfg |= >>>>>>>>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>>>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> - cmd->data->bytes_xfered = 0; >>>>>>>>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>>>>>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>>>>>>>> - dma_wmb(); >>>>>>>>>>> - } else { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>>>>>>>> - } >>>>>>>>>>> + data->bytes_xfered = 0; >>>>>>>>>>> + if (data->flags & MMC_DATA_WRITE) >>>>>>>>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>>>>>> >>>>>>>>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>>>>>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>>> + >>>>>>>>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>>>>>> + unsigned int len = sg_dma_len(sg); >>>>>>>>>>> + >>>>>>>>>>> + if (data->blocks > 1) >>>>>>>>>>> + len /= data->blksz; >>>>>>>>>>> + >>>>>>>>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>>>>>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>>>>>>>> + CMD_CFG_LENGTH_SHIFT; >>>>>>>>>>> + if (i > 0) >>>>>>>>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>>>>>>>> + desc[i].cmd_arg = cmd->arg; >>>>>>>>>>> + desc[i].cmd_resp = 0; >>>>>>>>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>>>>>>>> + } >>>>>>>>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>>> >>>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>>>>>>>> } else { >>>>>>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>>>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>>>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << >>>>>>>>>>> CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>>>>>>>> + desc[0].cmd_arg = cmd->arg; >>>>>>>>>>> + desc[0].cmd_resp = 0; >>>>>>>>>>> + desc[0].cmd_data = 0; >>>>>>>>>>> } >>>>>>>>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>>>>>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>>>>>>>> >>>>>>>>>>> host->cmd = cmd; >>>>>>>>>>> >>>>>>>>>>> - /* Last descriptor */ >>>>>>>>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>>>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>>>>>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>>>>>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>>>>>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>>>>>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>>>>>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>>>>>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> static void meson_mmc_request(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_request *mrq) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>>>>>> + bool needs_pre_post_req = mrq->data && >>>>>>>>>>> !mrq->data->host_cookie; >>>>>>>>>>> + >>>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>>> + meson_mmc_pre_req(mmc, mrq); >>>>>>>>>>> >>>>>>>>>>> /* Stop execution */ >>>>>>>>>>> writel(0, host->regs + SD_EMMC_START); >>>>>>>>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct >>>>>>>>>>> mmc_host *mmc, struct mmc_request *mrq) >>>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>>>>>>>> else >>>>>>>>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>>>>>>>> + >>>>>>>>>>> + if (needs_pre_post_req) >>>>>>>>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct >>>>>>>>>>> mmc_command *cmd) >>>>>>>>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>>> void *dev_id) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>>> struct mmc_command *cmd; >>>>>>>>>>> + struct mmc_data *data; >>>>>>>>>>> u32 irq_en, status, raw_status; >>>>>>>>>>> irqreturn_t ret = IRQ_HANDLED; >>>>>>>>>>> >>>>>>>>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>>> void *dev_id) >>>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>>> return IRQ_NONE; >>>>>>>>>>> >>>>>>>>>>> + data = cmd->data; >>>>>>>>>>> + >>>>>>>>>>> spin_lock(&host->lock); >>>>>>>>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>>>>>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, >>>>>>>>>>> void *dev_id) >>>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>>>>>>>> cmd->error = -ETIMEDOUT; >>>>>>>>>>> } >>>>>>>>>>> + >>>>>>>>>>> + if (data && !cmd->error) >>>>>>>>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>>>>>>>> + >>>>>>>>>>> if (status & IRQ_SDIO) >>>>>>>>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>>>>>>>> >>>>>>>>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>>>>>>>> - ret = IRQ_WAKE_THREAD; >>>>>>>>>>> - else { >>>>>>>>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>>>>>>>> + if (meson_mmc_get_next_command(cmd)) >>>>>>>>>>> + ret = IRQ_WAKE_THREAD; >>>>>>>>>>> + } else { >>>>>>>>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC >>>>>>>>>>> CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>>>>>>>> status, cmd->opcode, cmd->arg, >>>>>>>>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>>>>>>>> @@ -642,26 +681,12 @@ static irqreturn_t >>>>>>>>>>> meson_mmc_irq_thread(int irq, void *dev_id) >>>>>>>>>>> { >>>>>>>>>>> struct meson_host *host = dev_id; >>>>>>>>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>>>>>>>> - struct mmc_data *data; >>>>>>>>>>> - unsigned int xfer_bytes; >>>>>>>>>>> >>>>>>>>>>> if (WARN_ON(!cmd)) >>>>>>>>>>> return IRQ_NONE; >>>>>>>>>>> >>>>>>>>>>> - data = cmd->data; >>>>>>>>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>>>>>>>> - xfer_bytes = data->blksz * data->blocks; >>>>>>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>>>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>>>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>>>>>> - data->bytes_xfered = xfer_bytes; >>>>>>>>>>> - } >>>>>>>>>>> - >>>>>>>>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>>>>>>>> - if (next_cmd) >>>>>>>>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>>> - else >>>>>>>>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>>>>>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>>>>>> >>>>>>>>>>> return IRQ_HANDLED; >>>>>>>>>>> } >>>>>>>>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops >>>>>>>>>>> meson_mmc_ops = { >>>>>>>>>>> .request = meson_mmc_request, >>>>>>>>>>> .set_ios = meson_mmc_set_ios, >>>>>>>>>>> .get_cd = meson_mmc_get_cd, >>>>>>>>>>> + .pre_req = meson_mmc_pre_req, >>>>>>>>>>> + .post_req = meson_mmc_post_req, >>>>>>>>>>> }; >>>>>>>>>>> >>>>>>>>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>>>>>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct >>>>>>>>>>> platform_device *pdev) >>>>>>>>>>> >>>>>>>>>>> mmc->caps |= MMC_CAP_CMD23; >>>>>>>>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>>>>>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>>> - >>>>>>>>>>> - /* data bounce buffer */ >>>>>>>>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>>>>>>>> - host->bounce_buf = >>>>>>>>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>>>>>>>> - if (host->bounce_buf == NULL) { >>>>>>>>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce >>>>>>>>>>> buffer.\n"); >>>>>>>>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>>>>>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>>>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>>>>>>>> + >>>>>>>>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>>>>>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>>>>>>>> + if (!host->descs) { >>>>>>>>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer >>>>>>>>>>> failed\n"); >>>>>>>>>>> ret = -ENOMEM; >>>>>>>>>>> goto err_div_clk; >>>>>>>>>>> } >>>>>>>>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct >>>>>>>>>>> platform_device *pdev) >>>>>>>>>>> /* disable interrupts */ >>>>>>>>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>>>>>>>> >>>>>>>>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>>>>>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>>>>>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>>>>>>>> + host->descs_dma_addr); >>>>>>>>>>> >>>>>>>>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>>>>>>>> clk_disable_unprepare(host->core_clk); >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> compared to the patches 1...5 there is absolutely no change to >>>>>>>>>> patches 1, 2, 4 and the above. Neither syslog nor performance. >>>>>>>>>> >>>>>>>>> Thanks for re-testing. I have a little bit of a hard time to >>>>>>>>> understand why SD and eMMC mode >>>>>>>>> are working but SDIO (at least with brcfmac) is not. Especially as >>>>>>>>> I don't have HW to test SDIO mode on. >>>>>>>>> >>>>>>>>> After patches 1, 2, 4 the system is still working normally? >>>>>>>>> And would it be possible for you to compile a DEBUG kernel and >>>>>>>>> post the mmc/brcmfmac related output? >>>>>>>>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>>>>>>>> >>>>>>>>> Last but not least, could you please post /proc/interrupts ? This >>>>>>>>> would give an idea whether any SDIO >>>>>>>>> or just specific ones fail. >>>>>>>>> >>>>>>>>> Thanks, Heiner >>>>>>>>> >>>>>>>>>> regards >>>>>>>>>> Helmut >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> i enabled the debug flags for mmc and brcmfmac in the kernel >>>>>>>> configuration. >>>>>>>> For the test i also changed meson-gx-mmc from built-in to module. >>>>>>>> This resulted in a different order of the mmc devices. The >>>>>>>> sdio/wifi is now mmc0 and not mmc1 >>>>>>>> >>>>>>>> Without your new patch the wifi adapter works normally. >>>>>>>> >>>>>>>> The debug info was produced with following commad sequence >>>>>>>> dmesg -n 8 >>>>>>>> dmesg -D >>>>>>>> logger "loading meson-gx-mmc...." >>>>>>>> modprobe meson-gx-mmc >>>>>>>> sleep 1 >>>>>>>> logger "loading brcmfmac" >>>>>>>> modprobe brcmfmac >>>>>>>> logger "modules loaded" >>>>>>>> sleep 1 >>>>>>>> cp /var/log/syslog ~/syslog >>>>>>>> cp /proc/interrupts ~/interrupts >>>>>>>> >>>>>>>> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >>>>>>>> >>>>>>>> because of the length of the files i removed most lines of the >>>>>>>> loading of meson-gx-mmc >>>>>>>> >>>>>>>> unhandled interrupts: independent of the number of applied patches >>>>>>>> i've always got 11 of them. >>>>>>>> Only the timings differed with the applied patches >>>>>>>> >>>>>>>> the is the log for applied patches 1, 2, 4 & the new one >>>>>>>> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>>> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>>> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>>> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>>> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>>> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>>> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>>> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >>>>>>>> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response >>>>>>>> timeout >>>>>>>> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>>> 400000 -> 52000000 >>>>>>>> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>>> 52000000 != actual rate 50000000 >>>>>>>> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>>> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>>> loading brcmfmac >>>>>>>> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data >>>>>>>> available. >>>>>>>> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>>> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>>> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>>> brcmf_sdiod_probe... >>>>>>>> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >>>>>>>> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>>> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>>> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >>>>>>>> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >>>>>>>> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>>> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000a, nbytes=1 >>>>>>>> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>>> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000b, nbytes=1 >>>>>>>> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>>> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000c, nbytes=1 >>>>>>>> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>>> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x08000, nbytes=4 >>>>>>>> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>>> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>>> 1000 ms nsac 0 >>>>>>>> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731881] mmc0: 4 bytes transferred: 0 >>>>>>>> [ 48.731887] brcmfmac: brcmf_sdiod_regrl >>>>>>>> data:0x00000000 <<<<===== wrong! >>>>>>>> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >>>>>>>> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>>> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>>> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x21 >>>>>>>> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >>>>>>>> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, >>>>>>>> data:0x00 >>>>>>>> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000f, nbytes=1 >>>>>>>> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >>>>>>>> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>>> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x08000, nbytes=4 >>>>>>>> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>>> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>>> 1000 ms nsac 0 >>>>>>>> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.732235] mmc0: 4 bytes transferred: 0 >>>>>>>> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>>>>> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: >>>>>>>> BCM0, rev=0 >>>>>>>> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not >>>>>>>> supported >>>>>>>> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: >>>>>>>> brcmf_chip_attach failed! >>>>>>>> [ 48.732273] brcmfmac: brcmf_sdio_probe: >>>>>>>> brcmf_sdio_probe_attach failed >>>>>>>> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >>>>>>>> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering >>>>>>>> oob=0 sd=0 >>>>>>>> [ 48.732290] brcmfmac: brcmf_detach Enter >>>>>>>> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >>>>>>>> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >>>>>>>> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>>> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >>>>>>>> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >>>>>>>> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >>>>>>>> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >>>>>>>> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe >>>>>>>> failed -19... >>>>>>>> >>>>>>>> this is the debug data for applied patches 1,2 & 4 (left only few >>>>>>>> lines after the first CMD53) >>>>>>>> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>>>>>> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>>>>>> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>>>>>> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>>>>>> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>>>>>> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>>>>>> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>>>>>> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >>>>>>>> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate >>>>>>>> 400000 -> 52000000 >>>>>>>> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate >>>>>>>> 52000000 != actual rate 50000000 >>>>>>>> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>>>>>> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: >>>>>>>> SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>>>>>> loading brcmfmac >>>>>>>> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data >>>>>>>> available. >>>>>>>> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>>>>>> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >>>>>>>> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>>>>>> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>>>>>> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>>>>>> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>>>>>> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling >>>>>>>> brcmf_sdiod_probe... >>>>>>>> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>>>>>> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>>>>>> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>>>>>> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>>>>>> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >>>>>>>> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>>>>>> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>>>>>> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>>>>>> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >>>>>>>> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >>>>>>>> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>>>>>> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000a, nbytes=1 >>>>>>>> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>>>>>> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000b, nbytes=1 >>>>>>>> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>>>>>> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000c, nbytes=1 >>>>>>>> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>>>>>> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x08000, nbytes=4 >>>>>>>> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>>>> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac >>>>>>>> 1000 ms nsac 0 >>>>>>>> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796829] mmc0: 4 bytes transferred: 0 >>>>>>>> [ 53.796836] brcmfmac: brcmf_sdiod_regrl >>>>>>>> data:0x16044330 <<<<<====== ok >>>>>>>> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >>>>>>>> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>>>>>> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>>>>>> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>>>>>> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 >>>>>>>> 00000000 00000000 >>>>>>>> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>>>>>> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, >>>>>>>> data:0x28 >>>>>>>> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, >>>>>>>> addr=0x1000e, nbytes=1 >>>>>>>> >>>>>>>> if you need more data: just ask ;-) >>>>>>>> >>>>>>> Thanks a lot for the logs. So the first read returns 0 instead of >>>>>>> the actual register value. >>>>>>> Could you please apply the following on top of 1, 2, 4, new one and >>>>>>> send the log? >>>>>>> I hope the two debug messages bring me closer to the root cause of >>>>>>> the issue. >>>>>>> >>>>>>> Rgds, Heiner >>>>>>> >>>>>>> >>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> index 3b3ddf3e..d6d2d1a1 100644 >>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>>>>> *mmc, struct mmc_command *cmd) >>>>>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>> unsigned int len = sg_dma_len(sg); >>>>>>> >>>>>>> + if (cmd->opcode == 53) >>>>>>> + dev_info(host->info, "cmd 53: idx %d len %u\n", i, >>>>>>> len); >>>>>>> + >>>>>>> if (data->blocks > 1) >>>>>>> len /= data->blksz; >>>>>>> >>>>>>> @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>>>>> *dev_id) >>>>>>> >>>>>>> meson_mmc_read_resp(host->mmc, cmd); >>>>>>> >>>>>>> + if (cmd->opcode == 53) >>>>>>> + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", >>>>>>> host->descs[0].cmd_data); >>>>>>> + >>>>>>> cmd->error = 0; >>>>>>> if (status & IRQ_RXD_ERR_MASK) { >>>>>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>>>>> >>>>>> >>>>>> here is the output: >>>>>> [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, >>>>>> addr=0x08000, nbytes=4 >>>>>> [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>>>> [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms >>>>>> nsac 0 >>>>>> [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 >>>>>> [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 >>>>>> [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 >>>>>> 00000000 >>>>>> [ 107.510541] mmc0: 4 bytes transferred: 0 >>>>>> [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>>>> >>>>>> Helmut >>>>>> >>>>>> >>>>> Weird .. Everything looks ok so far. I don't see a reason why this >>>>> small read DMA returns >>>>> zeroed bytes only whilst bigger ones in SD/eMMC work perfectly fine. >>>>> >>>>> OK, one last attempt before I have to think about a better way to >>>>> tackle this issue. >>>>> >>>>> Could you please replace the last logging extension patch with this one? >>>>> (I just added a memory barrier to be sure to read the actual value.) >>>>> >>>>> Thanks, Heiner >>>>> >>>>> >>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c >>>>> b/drivers/mmc/host/meson-gx-mmc.c >>>>> index ca685902..5b511944 100644 >>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>> @@ -523,6 +523,9 @@ static void meson_mmc_start_cmd(struct mmc_host >>>>> *mmc, struct mmc_command *cmd) >>>>> for_each_sg(data->sg, sg, data->sg_count, i) { >>>>> unsigned int len = sg_dma_len(sg); >>>>> >>>>> + if (cmd->opcode == 53) >>>>> + pr_info("sg: idx %d len %u\n", i, len); >>>>> + >>>>> if (data->blocks > 1) >>>>> len /= data->blksz; >>>>> >>>>> @@ -619,6 +622,11 @@ static irqreturn_t meson_mmc_irq(int irq, void >>>>> *dev_id) >>>>> >>>>> meson_mmc_read_resp(host->mmc, cmd); >>>>> >>>>> + if (cmd->opcode == 53) { >>>>> + dma_rmb(); >>>>> + pr_info("cmd 53 cmd_data0: %08x\n", host->descs[0].cmd_data); >>>>> + } >>>>> + >>>>> cmd->error = 0; >>>>> if (status & IRQ_RXD_ERR_MASK) { >>>>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>>>> >>>> >>>> the output is not really different (for the 2 cmd53) >>>> [ 37.113577] sg: idx 0 len 4 >>>> [ 37.113595] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>>> [ 37.114016] sg: idx 0 len 4 >>>> [ 37.114034] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 >>>> >>>> Helmut >>> >>> >>> I've added my own debugging code to both variations of the driver. but without a positiv result >>> >>> here are the patches >>> >>> for the fully operational version >>> >>> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-18 15:22:31.000000000 +0100 >>> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 13:02:05.254762191 +0100 >>> @@ -468,6 +468,9 @@ static void meson_mmc_start_cmd(struct m >>> >>> /* data? */ >>> if (cmd->data) { >>> + >>> + dev_dbg(host->dev, "DBG data"); >>> + >>> desc->cmd_cfg |= CMD_CFG_DATA_IO; >>> if (cmd->data->blocks > 1) { >>> desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>> @@ -526,6 +529,10 @@ static void meson_mmc_start_cmd(struct m >>> writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>> writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>> wmb(); /* ensure descriptor is written before kicked */ >>> + >>> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >>> + desc->cmd_cfg, desc->cmd_arg, desc->cmd_resp); >>> + >>> writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>> } >>> >>> @@ -576,6 +583,8 @@ static irqreturn_t meson_mmc_irq(int irq >>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>> status = raw_status & irq_en; >>> >>> + dev_dbg(host->dev, "DBG status 0x%08x", status); >>> + >>> if (!status) { >>> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >>> raw_status, irq_en); >>> >>> and this is for the version with the sdio problem >>> >>> --- a/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:50:32.956474080 +0100 >>> +++ b/drivers/mmc/host/meson-gx-mmc.c 2017-03-20 12:57:27.185837225 +0100 >>> @@ -493,6 +493,9 @@ static void meson_mmc_start_cmd(struct m >>> } >>> >>> if (data) { >>> + >>> + dev_dbg(host->dev, "DBG data"); >>> + >>> cmd_cfg |= CMD_CFG_DATA_IO; >>> >>> if (data->blocks > 1) { >>> @@ -549,6 +552,10 @@ static void meson_mmc_start_cmd(struct m >>> host->cmd = cmd; >>> >>> wmb(); /* ensure descriptor is written before kicked */ >>> + >>> + dev_dbg(host->dev, "DBG cmd_cfg: 0x%08x, arg: 0x%08x, resp: 0x%08x", >>> + desc[0].cmd_cfg, desc[0].cmd_arg, desc[0].cmd_resp); >>> + >>> cfg = host->descs_dma_addr | START_DESC_BUSY; >>> writel(cfg, host->regs + SD_EMMC_START); >>> } >>> @@ -610,6 +617,8 @@ static irqreturn_t meson_mmc_irq(int irq >>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>> status = raw_status & irq_en; >>> >>> + dev_dbg(host->dev, "DBG status 0x%08x", status); >>> + >>> if (!status) { >>> dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", >>> raw_status, irq_en); >>> >>> the filtered logs are identical up and including the 2nd cmd53. >>> >>> Helmut >>> >>> >> Thanks. Really appreciate your support. Meanwhile I think there must be a bug >> either in the DMA subsystem or there's a hw bug causing issues with very small >> transfers. That's the only difference between SD/eMMC and SDIO on that level: >> SD/eMMC always transfers 512 byte blocks whilst SDIO also uses very small >> transfers. >> >> For up to 4 bytes the chip supports an alternative transfer method. >> Let's try this as workaround. >> >> Could you please apply: >> patches 1, 2, 4 + the updated bigger patch I sent via mail + the following: >> >> >> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >> index 4f9fafd3..cf9be13f 100644 >> --- a/drivers/mmc/host/meson-gx-mmc.c >> +++ b/drivers/mmc/host/meson-gx-mmc.c >> @@ -185,6 +185,12 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) >> return NULL; >> } >> >> +static bool meson_mmc_small_read(const struct mmc_data *data) >> +{ >> + return data && data->blocks <= 1 && data->blksz <= 4 && >> + data->flags & MMC_DATA_READ; >> +} >> + >> static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) >> { >> return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; >> @@ -208,11 +214,22 @@ static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) >> static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, >> int err) >> { >> + struct meson_host *host = mmc_priv(mmc); >> struct mmc_data *data = mrq->data; >> >> if (data && data->sg_count) >> dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >> meson_mmc_get_data_dir(data)); >> + >> + if (meson_mmc_small_read(data)) { >> + int cnt; >> + >> + dma_rmb(); >> + cnt = sg_copy_from_buffer(data->sg, data->sg_len, >> + &host->descs[0].cmd_data, data->blksz); >> + if (cnt != data->blksz) >> + dev_err(host->dev, "error copying to scatterlist\n"); >> + } >> } >> >> static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) >> @@ -493,6 +510,8 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >> } >> >> if (data) { >> + bool small_read = meson_mmc_small_read(data); >> + >> cmd_cfg |= CMD_CFG_DATA_IO; >> >> if (data->blocks > 1) { >> @@ -513,6 +532,14 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >> } >> } >> >> + /* >> + * workaround for most likely hw bug >> + * if up to 4 bytes receive them in the descriptor instead >> + * of using dma_map_sg/dma_unmap_sg >> + */ >> + if (small_read) >> + cmd_cfg |= CMD_CFG_DATA_NUM; >> + >> data->bytes_xfered = 0; >> if (data->flags & MMC_DATA_WRITE) >> cmd_cfg |= CMD_CFG_DATA_WR; >> @@ -533,7 +560,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >> desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >> desc[i].cmd_arg = cmd->arg; >> desc[i].cmd_resp = 0; >> - desc[i].cmd_data = sg_dma_address(sg); >> + desc[i].cmd_data = small_read ? 0 : sg_dma_address(sg); >> } >> desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >> >> > > Hallo Heiner, > > here is the result: > [ 44.375027] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 > [ 44.375034] mmc0: starting CMD53 arg 15000004 flags 000001b5 > [ 44.375037] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 > [ 44.375047] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 > [ 44.375050] mmc0: 4 bytes transferred: 0 > [ 44.375057] brcmfmac: brcmf_sdiod_regrl data:0x16044330 > [ 44.375059] brcmfmac: F1 signature read @0x18000000=0x16044330 > > [ 44.375296] mmc0: starting CMD53 arg 15000004 flags 000001b5 > [ 44.375299] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 > [ 44.375309] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 > [ 44.375311] mmc0: 4 bytes transferred: 0 > [ 44.375323] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<< expected 0x16044330 > [ 44.375327] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 > [ 44.375330] brcmfmac: brcmf_chip_recognition: SB chip is not supported > [ 44.375333] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! > [ 44.375337] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed > [ 44.375339] brcmfmac: brcmf_sdio_remove Enter > > the 1. cmd53 returned the correct data. > the second one failed. 0x0 instead of 0x16044330 (the same value as in the 1. cmd53) > Thanks again for your testing efforts. Then I'll do the following: I will keep the old single-descriptor / bounce-buffer mode for smaller transfers and use descriptor-chain mode only for bigger multi-block transfers. Before these functional changes I think there will be one more round with smaller refactorings. Thanks, Heiner > Helmut >