* [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
@ 2019-12-09 15:19 Michal Simek
2019-12-09 15:19 ` [PATCH 1/2] arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform Michal Simek
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Michal Simek @ 2019-12-09 15:19 UTC (permalink / raw)
To: u-boot
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with
corresponding defconfigs. Also a lot of drivers have been moved to DM that
we can make one generic configuration with one defconfig.
Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this:
export DEVICE_TREE="avnet-ultra96-rev1"
make xilinx_zynqmp_virt_defconfig
make -j
Series depends on patches sent before that's why here is full tree:
https://github.com/michalsimek/u-boot/tree/20191209-mainline
Thanks,
Michal
Michal Simek (2):
arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform
arm64: zynqmp: Use zynqmp_virt platform
configs/avnet_ultra96_rev1_defconfig | 90 --------------
configs/xilinx_zynqmp_a2197_revA_defconfig | 113 ------------------
.../xilinx_zynqmp_e_a2197_00_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_g_a2197_00_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_m_a2197_01_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_m_a2197_02_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_m_a2197_03_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_p_a2197_00_revA_defconfig | 111 -----------------
configs/xilinx_zynqmp_virt_defconfig | 28 ++++-
configs/xilinx_zynqmp_zc1232_revA_defconfig | 50 --------
configs/xilinx_zynqmp_zc1254_revA_defconfig | 50 --------
.../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 95 ---------------
.../xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 68 -----------
.../xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 61 ----------
configs/xilinx_zynqmp_zcu100_revC_defconfig | 87 --------------
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 112 -----------------
configs/xilinx_zynqmp_zcu102_revA_defconfig | 112 -----------------
configs/xilinx_zynqmp_zcu102_revB_defconfig | 111 -----------------
configs/xilinx_zynqmp_zcu104_revA_defconfig | 92 --------------
configs/xilinx_zynqmp_zcu104_revC_defconfig | 96 ---------------
configs/xilinx_zynqmp_zcu106_revA_defconfig | 105 ----------------
configs/xilinx_zynqmp_zcu111_revA_defconfig | 94 ---------------
configs/xilinx_zynqmp_zcu1275_revA_defconfig | 50 --------
configs/xilinx_zynqmp_zcu1275_revB_defconfig | 59 ---------
configs/xilinx_zynqmp_zcu216_revA_defconfig | 95 ---------------
25 files changed, 26 insertions(+), 2208 deletions(-)
delete mode 100644 configs/avnet_ultra96_rev1_defconfig
delete mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_e_a2197_00_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_g_a2197_00_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_m_a2197_01_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_m_a2197_02_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_m_a2197_03_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_p_a2197_00_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1232_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1254_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu100_revC_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu102_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu102_revB_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu104_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu104_revC_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu106_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu111_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu1275_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu1275_revB_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu216_revA_defconfig
--
2.24.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform
2019-12-09 15:19 [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
@ 2019-12-09 15:19 ` Michal Simek
2019-12-09 15:19 ` [PATCH 2/2] arm64: zynqmp: Use " Michal Simek
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2019-12-09 15:19 UTC (permalink / raw)
To: u-boot
These options are taken from zcu102/104 platforms. Also use OF_SEPARATE
instead of OF_BOARD. Maybe at some point this option will be taken back but
as of now board detection is not ready.
export DEVICE_TREE="zynqmp-zcu102-revA"
make xilinx_zynqmp_virt_defconfig
make -j
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
configs/xilinx_zynqmp_virt_defconfig | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index c7e365d009ab..90e8c75d29c2 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -16,10 +16,13 @@ CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_ATF=y
+CONFIG_CMD_BOOTMENU=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_BIND=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FPGA_LOADBP=y
@@ -29,14 +32,16 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SDRAM=y
+CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_BOARD=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
@@ -53,7 +58,9 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
CONFIG_XILINX_GPIO=y
+CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
@@ -65,29 +72,37 @@ CONFIG_I2C_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
CONFIG_SYS_I2C_EEPROM_ADDR=0x0
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SF_DUAL_FLASH=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI=y
CONFIG_PHY_VITESSE=y
+CONFIG_PHY_XILINX_GMII2RGMII=y
CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
CONFIG_MII=y
CONFIG_ZYNQ_GEM=y
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_ZYNQ_SERIAL=y
CONFIG_SPI=y
+CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
@@ -101,4 +116,12 @@ CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_USB_FUNCTION_THOR=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_WDT=y
+CONFIG_WDT_CDNS=y
+CONFIG_SPL_GZIP=y
+CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] arm64: zynqmp: Use zynqmp_virt platform
2019-12-09 15:19 [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
2019-12-09 15:19 ` [PATCH 1/2] arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform Michal Simek
@ 2019-12-09 15:19 ` Michal Simek
2019-12-10 12:40 ` [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
2020-01-16 7:16 ` Michal Simek
3 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2019-12-09 15:19 UTC (permalink / raw)
To: u-boot
Decrease amount of the similar defconfigs and use generic one instead.
The change was declared by commit 4b37c13dc353
("arm64: zynqmp: Introduce virtual defconfig") and this patch removes
configs for the most of the boards.
Utra96/zcu100/zcu102/zcu102 and ZynqMP based System controllers *a2197*.
have been also boot tested to make sure that funcionality
remains the same.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
configs/avnet_ultra96_rev1_defconfig | 90 --------------
configs/xilinx_zynqmp_a2197_revA_defconfig | 113 ------------------
.../xilinx_zynqmp_e_a2197_00_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_g_a2197_00_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_m_a2197_01_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_m_a2197_02_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_m_a2197_03_revA_defconfig | 111 -----------------
.../xilinx_zynqmp_p_a2197_00_revA_defconfig | 111 -----------------
configs/xilinx_zynqmp_virt_defconfig | 1 +
configs/xilinx_zynqmp_zc1232_revA_defconfig | 50 --------
configs/xilinx_zynqmp_zc1254_revA_defconfig | 50 --------
.../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 95 ---------------
.../xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 68 -----------
.../xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 61 ----------
configs/xilinx_zynqmp_zcu100_revC_defconfig | 87 --------------
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 112 -----------------
configs/xilinx_zynqmp_zcu102_revA_defconfig | 112 -----------------
configs/xilinx_zynqmp_zcu102_revB_defconfig | 111 -----------------
configs/xilinx_zynqmp_zcu104_revA_defconfig | 92 --------------
configs/xilinx_zynqmp_zcu104_revC_defconfig | 96 ---------------
configs/xilinx_zynqmp_zcu106_revA_defconfig | 105 ----------------
configs/xilinx_zynqmp_zcu111_revA_defconfig | 94 ---------------
configs/xilinx_zynqmp_zcu1275_revA_defconfig | 50 --------
configs/xilinx_zynqmp_zcu1275_revB_defconfig | 59 ---------
configs/xilinx_zynqmp_zcu216_revA_defconfig | 95 ---------------
25 files changed, 1 insertion(+), 2206 deletions(-)
delete mode 100644 configs/avnet_ultra96_rev1_defconfig
delete mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_e_a2197_00_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_g_a2197_00_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_m_a2197_01_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_m_a2197_02_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_m_a2197_03_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_p_a2197_00_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1232_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1254_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
delete mode 100644 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu100_revC_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu102_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu102_revB_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu104_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu104_revC_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu106_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu111_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu1275_revA_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu1275_revB_defconfig
delete mode 100644 configs/xilinx_zynqmp_zcu216_revA_defconfig
diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig
deleted file mode 100644
index 43aacf322ba3..000000000000
--- a/configs/avnet_ultra96_rev1_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff010000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_BOOTMENU=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="avnet-ultra96-rev1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-# CONFIG_NETDEVICES is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQ_SPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_ETHER=y
-CONFIG_USB_ETH_CDC=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_WDT=y
-CONFIG_WDT_CDNS=y
-CONFIG_SPL_GZIP=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig
deleted file mode 100644
index 0e6d8b518ad5..000000000000
--- a/configs/xilinx_zynqmp_a2197_revA_defconfig
+++ /dev/null
@@ -1,113 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA"
-CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-g-a2197-00-revA zynqmp-p-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig b/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig
deleted file mode 100644
index faf7e45a9aec..000000000000
--- a/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-e-a2197-00-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig b/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig
deleted file mode 100644
index abef223df8e2..000000000000
--- a/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-g-a2197-00-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig
deleted file mode 100644
index db5eccc436a4..000000000000
--- a/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-01-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig
deleted file mode 100644
index 9228ce186e6a..000000000000
--- a/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-02-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig
deleted file mode 100644
index af2ab307d8f1..000000000000
--- a/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-03-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig b/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig
deleted file mode 100644
index f206be8a3145..000000000000
--- a/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-p-a2197-00-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 90e8c75d29c2..4047475d3c11 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -42,6 +42,7 @@ CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu216-revA"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig
deleted file mode 100644
index f79d803d3225..000000000000
--- a/configs/xilinx_zynqmp_zc1232_revA_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1232-revA"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig
deleted file mode 100644
index bc3d0dfe2201..000000000000
--- a/configs/xilinx_zynqmp_zc1254_revA_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1254-revA"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
deleted file mode 100644
index 62c373051543..000000000000
--- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
+++ /dev/null
@@ -1,95 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_HS200_SUPPORT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
deleted file mode 100644
index 5216a5cd98f3..000000000000
--- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm018-dc4"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
deleted file mode 100644
index 92cfe22d16a1..000000000000
--- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig
deleted file mode 100644
index d53a0366e536..000000000000
--- a/configs/xilinx_zynqmp_zcu100_revC_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff010000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_BOOTMENU=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-# CONFIG_NETDEVICES is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQ_SPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_ETHER=y
-CONFIG_USB_ETH_CDC=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_SPL_GZIP=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
deleted file mode 100644
index 0948a04af9e1..000000000000
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ /dev/null
@@ -1,112 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-rev1.0"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_GPIO_HOG=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig
deleted file mode 100644
index e94064ffabbd..000000000000
--- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
+++ /dev/null
@@ -1,112 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_GPIO_HOG=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
deleted file mode 100644
index 62b66f55f6bd..000000000000
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_GPIO_HOG=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig
deleted file mode 100644
index 84b714a3256d..000000000000
--- a/configs/xilinx_zynqmp_zcu104_revA_defconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu104-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig
deleted file mode 100644
index 76b1f7e2b945..000000000000
--- a/configs/xilinx_zynqmp_zcu104_revC_defconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu104-revC"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig
deleted file mode 100644
index 3fb48cb3c21d..000000000000
--- a/configs/xilinx_zynqmp_zcu106_revA_defconfig
+++ /dev/null
@@ -1,105 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu106-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu111_revA_defconfig b/configs/xilinx_zynqmp_zcu111_revA_defconfig
deleted file mode 100644
index 231bf521d1f2..000000000000
--- a/configs/xilinx_zynqmp_zcu111_revA_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu111-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu1275_revA_defconfig b/configs/xilinx_zynqmp_zcu1275_revA_defconfig
deleted file mode 100644
index 9d7efe0ca5f0..000000000000
--- a/configs/xilinx_zynqmp_zcu1275_revA_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu1275-revA"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu1275_revB_defconfig b/configs/xilinx_zynqmp_zcu1275_revB_defconfig
deleted file mode 100644
index 87d486702851..000000000000
--- a/configs/xilinx_zynqmp_zcu1275_revB_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu1275-revB"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_PHY_XILINX_GMII2RGMII=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/xilinx_zynqmp_zcu216_revA_defconfig b/configs/xilinx_zynqmp_zcu216_revA_defconfig
deleted file mode 100644
index 14a3d84a2d46..000000000000
--- a/configs/xilinx_zynqmp_zcu216_revA_defconfig
+++ /dev/null
@@ -1,95 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu216-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
--
2.24.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
2019-12-09 15:19 [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
2019-12-09 15:19 ` [PATCH 1/2] arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform Michal Simek
2019-12-09 15:19 ` [PATCH 2/2] arm64: zynqmp: Use " Michal Simek
@ 2019-12-10 12:40 ` Michal Simek
2019-12-10 13:56 ` Tom Rini
2020-01-16 7:16 ` Michal Simek
3 siblings, 1 reply; 9+ messages in thread
From: Michal Simek @ 2019-12-10 12:40 UTC (permalink / raw)
To: u-boot
Hi Tom,
On 09. 12. 19 16:19, Michal Simek wrote:
> Hi,
>
> over years a lot of new Xilinx ZynqMP board have been added to U-Boot with
> corresponding defconfigs. Also a lot of drivers have been moved to DM that
> we can make one generic configuration with one defconfig.
> Nand still needs to be validated that's why dc2/dc3 are not moved yet.
>
> Boards can be build like this:
> export DEVICE_TREE="avnet-ultra96-rev1"
> make xilinx_zynqmp_virt_defconfig
> make -j
>
> Series depends on patches sent before that's why here is full tree:
> https://github.com/michalsimek/u-boot/tree/20191209-mainline
This series will require some changes in CI loops because right now
I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to
"force" everybody to properly pass DEVICE_TREE via command line.
I can't use OF_BOARD because then SPL is built without DT at all.
How do you think I should handle it for CI loops?
1. I can remove this configuration but it will be only one at the end
that's why not a good solution.
2. Add generic option to run some commands before tests like export
DEVICE_TREE above
3. provide different options for SPL/full u-boot how
OF_SEPARATE/OF_BOARD is handled.
Thanks for your suggestions,
Michal
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
2019-12-10 12:40 ` [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
@ 2019-12-10 13:56 ` Tom Rini
2019-12-10 15:24 ` Michal Simek
0 siblings, 1 reply; 9+ messages in thread
From: Tom Rini @ 2019-12-10 13:56 UTC (permalink / raw)
To: u-boot
On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
> Hi Tom,
>
> On 09. 12. 19 16:19, Michal Simek wrote:
> > Hi,
> >
> > over years a lot of new Xilinx ZynqMP board have been added to U-Boot with
> > corresponding defconfigs. Also a lot of drivers have been moved to DM that
> > we can make one generic configuration with one defconfig.
> > Nand still needs to be validated that's why dc2/dc3 are not moved yet.
> >
> > Boards can be build like this:
> > export DEVICE_TREE="avnet-ultra96-rev1"
> > make xilinx_zynqmp_virt_defconfig
> > make -j
> >
> > Series depends on patches sent before that's why here is full tree:
> > https://github.com/michalsimek/u-boot/tree/20191209-mainline
>
> This series will require some changes in CI loops because right now
> I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to
> "force" everybody to properly pass DEVICE_TREE via command line.
> I can't use OF_BOARD because then SPL is built without DT at all.
>
> How do you think I should handle it for CI loops?
> 1. I can remove this configuration but it will be only one at the end
> that's why not a good solution.
> 2. Add generic option to run some commands before tests like export
> DEVICE_TREE above
> 3. provide different options for SPL/full u-boot how
> OF_SEPARATE/OF_BOARD is handled.
So, for CI are you wanting to test most device trees, or just one? Are
we able to run one of these device trees via QEMU? If we can run the
virt defconfig via qemu, we should just update/extend that stanza in the
CI files to set DEVICE_TREE and exclude building it from the normal
jobs. If we can't run via qemu then yes, something like option #2 and
we set DEVICE_TREE in one job and export it if set in the build job.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191210/3a7a3ed6/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
2019-12-10 13:56 ` Tom Rini
@ 2019-12-10 15:24 ` Michal Simek
2019-12-10 15:30 ` Tom Rini
0 siblings, 1 reply; 9+ messages in thread
From: Michal Simek @ 2019-12-10 15:24 UTC (permalink / raw)
To: u-boot
On 10. 12. 19 14:56, Tom Rini wrote:
> On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
>> Hi Tom,
>>
>> On 09. 12. 19 16:19, Michal Simek wrote:
>>> Hi,
>>>
>>> over years a lot of new Xilinx ZynqMP board have been added to U-Boot with
>>> corresponding defconfigs. Also a lot of drivers have been moved to DM that
>>> we can make one generic configuration with one defconfig.
>>> Nand still needs to be validated that's why dc2/dc3 are not moved yet.
>>>
>>> Boards can be build like this:
>>> export DEVICE_TREE="avnet-ultra96-rev1"
>>> make xilinx_zynqmp_virt_defconfig
>>> make -j
>>>
>>> Series depends on patches sent before that's why here is full tree:
>>> https://github.com/michalsimek/u-boot/tree/20191209-mainline
>>
>> This series will require some changes in CI loops because right now
>> I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to
>> "force" everybody to properly pass DEVICE_TREE via command line.
>> I can't use OF_BOARD because then SPL is built without DT at all.
>>
>> How do you think I should handle it for CI loops?
>> 1. I can remove this configuration but it will be only one at the end
>> that's why not a good solution.
>> 2. Add generic option to run some commands before tests like export
>> DEVICE_TREE above
>> 3. provide different options for SPL/full u-boot how
>> OF_SEPARATE/OF_BOARD is handled.
>
> So, for CI are you wanting to test most device trees, or just one?
All zynqmp dtses are built by default.
> Are
> we able to run one of these device trees via QEMU?
zynqmp is covered just by buildman not by pytest. I have this on my todo
list for some time but there will be other issues with mainline qemu to
do so.
> If we can run the
> virt defconfig via qemu, we should just update/extend that stanza in the
> CI files to set DEVICE_TREE and exclude building it from the normal
> jobs.
Based on next generation Xilinx Versal where we use OF_BOARD qemu is
generated DT for model self to ensure that only stuff which are emulated
are provided to SW. Logic for dt selection is quite simply.
https://github.com/Xilinx/u-boot-xlnx/blob/master/arch/arm/mach-versal/cpu.c#L112
But Versal is not using SPL and SPL needs initial DT. Also standard
Xilinx boot flow on zynq/zynqmp is not using SPL and SPL is community
driven effort.
At the end of the day I would like to use the same functionality across
boards. It means full u-boot should check one fixed location for DT
first with priority. For this OF_SEPARATE can be also used because
board_fdt_blob_setup can be overwritten for these cases too.
https://gitlab.denx.de/u-boot/u-boot/blob/master/lib/fdtdec.c#L1190
> If we can't run via qemu then yes, something like option #2 and
> we set DEVICE_TREE in one job and export it if set in the build job.
It means for qemu there is no real need to build dts from source tree at
all.
Let me look at #2 for CI.
Thanks,
Michal
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
2019-12-10 15:24 ` Michal Simek
@ 2019-12-10 15:30 ` Tom Rini
2019-12-11 13:52 ` Michal Simek
0 siblings, 1 reply; 9+ messages in thread
From: Tom Rini @ 2019-12-10 15:30 UTC (permalink / raw)
To: u-boot
On Tue, Dec 10, 2019 at 04:24:09PM +0100, Michal Simek wrote:
> On 10. 12. 19 14:56, Tom Rini wrote:
> > On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
> >> Hi Tom,
> >>
> >> On 09. 12. 19 16:19, Michal Simek wrote:
> >>> Hi,
> >>>
> >>> over years a lot of new Xilinx ZynqMP board have been added to U-Boot with
> >>> corresponding defconfigs. Also a lot of drivers have been moved to DM that
> >>> we can make one generic configuration with one defconfig.
> >>> Nand still needs to be validated that's why dc2/dc3 are not moved yet.
> >>>
> >>> Boards can be build like this:
> >>> export DEVICE_TREE="avnet-ultra96-rev1"
> >>> make xilinx_zynqmp_virt_defconfig
> >>> make -j
> >>>
> >>> Series depends on patches sent before that's why here is full tree:
> >>> https://github.com/michalsimek/u-boot/tree/20191209-mainline
> >>
> >> This series will require some changes in CI loops because right now
> >> I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to
> >> "force" everybody to properly pass DEVICE_TREE via command line.
> >> I can't use OF_BOARD because then SPL is built without DT at all.
> >>
> >> How do you think I should handle it for CI loops?
> >> 1. I can remove this configuration but it will be only one at the end
> >> that's why not a good solution.
> >> 2. Add generic option to run some commands before tests like export
> >> DEVICE_TREE above
> >> 3. provide different options for SPL/full u-boot how
> >> OF_SEPARATE/OF_BOARD is handled.
> >
> > So, for CI are you wanting to test most device trees, or just one?
>
> All zynqmp dtses are built by default.
Right, but for what I thought you're saying the real use is, you pass
just a single device tree, right? If so, do you think we should loop
over each, or just build one?
> > Are
> > we able to run one of these device trees via QEMU?
>
> zynqmp is covered just by buildman not by pytest. I have this on my todo
> list for some time but there will be other issues with mainline qemu to
> do so.
OK, so something to improve for the future, and after we handle this
"today" problem.
> > If we can run the
> > virt defconfig via qemu, we should just update/extend that stanza in the
> > CI files to set DEVICE_TREE and exclude building it from the normal
> > jobs.
>
> Based on next generation Xilinx Versal where we use OF_BOARD qemu is
> generated DT for model self to ensure that only stuff which are emulated
> are provided to SW. Logic for dt selection is quite simply.
> https://github.com/Xilinx/u-boot-xlnx/blob/master/arch/arm/mach-versal/cpu.c#L112
> But Versal is not using SPL and SPL needs initial DT. Also standard
> Xilinx boot flow on zynq/zynqmp is not using SPL and SPL is community
> driven effort.
>
> At the end of the day I would like to use the same functionality across
> boards. It means full u-boot should check one fixed location for DT
> first with priority. For this OF_SEPARATE can be also used because
> board_fdt_blob_setup can be overwritten for these cases too.
> https://gitlab.denx.de/u-boot/u-boot/blob/master/lib/fdtdec.c#L1190
>
> > If we can't run via qemu then yes, something like option #2 and
> > we set DEVICE_TREE in one job and export it if set in the build job.
>
> It means for qemu there is no real need to build dts from source tree at
> all.
> Let me look at #2 for CI.
OK, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191210/d74e4f4b/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
2019-12-10 15:30 ` Tom Rini
@ 2019-12-11 13:52 ` Michal Simek
0 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2019-12-11 13:52 UTC (permalink / raw)
To: u-boot
On 10. 12. 19 16:30, Tom Rini wrote:
> On Tue, Dec 10, 2019 at 04:24:09PM +0100, Michal Simek wrote:
>> On 10. 12. 19 14:56, Tom Rini wrote:
>>> On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
>>>> Hi Tom,
>>>>
>>>> On 09. 12. 19 16:19, Michal Simek wrote:
>>>>> Hi,
>>>>>
>>>>> over years a lot of new Xilinx ZynqMP board have been added to U-Boot with
>>>>> corresponding defconfigs. Also a lot of drivers have been moved to DM that
>>>>> we can make one generic configuration with one defconfig.
>>>>> Nand still needs to be validated that's why dc2/dc3 are not moved yet.
>>>>>
>>>>> Boards can be build like this:
>>>>> export DEVICE_TREE="avnet-ultra96-rev1"
>>>>> make xilinx_zynqmp_virt_defconfig
>>>>> make -j
>>>>>
>>>>> Series depends on patches sent before that's why here is full tree:
>>>>> https://github.com/michalsimek/u-boot/tree/20191209-mainline
>>>>
>>>> This series will require some changes in CI loops because right now
>>>> I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to
>>>> "force" everybody to properly pass DEVICE_TREE via command line.
>>>> I can't use OF_BOARD because then SPL is built without DT at all.
>>>>
>>>> How do you think I should handle it for CI loops?
>>>> 1. I can remove this configuration but it will be only one at the end
>>>> that's why not a good solution.
>>>> 2. Add generic option to run some commands before tests like export
>>>> DEVICE_TREE above
>>>> 3. provide different options for SPL/full u-boot how
>>>> OF_SEPARATE/OF_BOARD is handled.
>>>
>>> So, for CI are you wanting to test most device trees, or just one?
>>
>> All zynqmp dtses are built by default.
>
> Right, but for what I thought you're saying the real use is, you pass
> just a single device tree, right? If so, do you think we should loop
> over each, or just build one?
>
>>> Are
>>> we able to run one of these device trees via QEMU?
>>
>> zynqmp is covered just by buildman not by pytest. I have this on my todo
>> list for some time but there will be other issues with mainline qemu to
>> do so.
>
> OK, so something to improve for the future, and after we handle this
> "today" problem.
>
>>> If we can run the
>>> virt defconfig via qemu, we should just update/extend that stanza in the
>>> CI files to set DEVICE_TREE and exclude building it from the normal
>>> jobs.
>>
>> Based on next generation Xilinx Versal where we use OF_BOARD qemu is
>> generated DT for model self to ensure that only stuff which are emulated
>> are provided to SW. Logic for dt selection is quite simply.
>> https://github.com/Xilinx/u-boot-xlnx/blob/master/arch/arm/mach-versal/cpu.c#L112
>> But Versal is not using SPL and SPL needs initial DT. Also standard
>> Xilinx boot flow on zynq/zynqmp is not using SPL and SPL is community
>> driven effort.
>>
>> At the end of the day I would like to use the same functionality across
>> boards. It means full u-boot should check one fixed location for DT
>> first with priority. For this OF_SEPARATE can be also used because
>> board_fdt_blob_setup can be overwritten for these cases too.
>> https://gitlab.denx.de/u-boot/u-boot/blob/master/lib/fdtdec.c#L1190
>>
>>> If we can't run via qemu then yes, something like option #2 and
>>> we set DEVICE_TREE in one job and export it if set in the build job.
>>
>> It means for qemu there is no real need to build dts from source tree at
>> all.
>> Let me look at #2 for CI.
>
> OK, thanks!
>
I have look at it again and there are other strange things. When you
select CONFIG_SPL_FIT_GENERATOR then there is no reason to generate
u-boot.img (because you want to replace this by your generator) or
append dtb behind u-boot.bin (because default option is already setup in
fit format).
CAT u-boot-dtb.bin
MKIMAGE u-boot.img
MKIMAGE u-boot-dtb.img
COPY u-boot.bin
LD u-boot.elf
MKIMAGE u-boot.itb
Regarding travis. just c&p. What about just this?
diff --git a/.travis.yml b/.travis.yml
index 5da046ca7ed5..4cef12e18370 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -118,6 +118,9 @@ script:
# use clang only do one configuration.
- if [[ "${BUILDMAN}" != "" ]]; then
ret=0;
+ if [[ "${ENV}" != "" ]]; then
+ export eval `echo ${ENV}`;
+ fi;
tools/buildman/buildman -P -E ${BUILDMAN} ${OVERRIDE}|| ret=$?;
if [[ $ret -ne 0 && $ret -ne 129 ]]; then
tools/buildman/buildman -sdeP ${BUILDMAN};
And then job like this
- name: "buildman ZynqMP Virt"
env:
- ENV="DEVICE_TREE=zynqmp-zcu100-revC"
- BUILDMAN="xilinx_zynqmp_virt"
Or do you see any smarter way how this can be done?
Thanks,
Michal
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
2019-12-09 15:19 [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
` (2 preceding siblings ...)
2019-12-10 12:40 ` [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
@ 2020-01-16 7:16 ` Michal Simek
3 siblings, 0 replies; 9+ messages in thread
From: Michal Simek @ 2020-01-16 7:16 UTC (permalink / raw)
To: u-boot
po 9. 12. 2019 v 16:19 odesÃlatel Michal Simek <michal.simek@xilinx.com> napsal:
>
> Hi,
>
> over years a lot of new Xilinx ZynqMP board have been added to U-Boot with
> corresponding defconfigs. Also a lot of drivers have been moved to DM that
> we can make one generic configuration with one defconfig.
> Nand still needs to be validated that's why dc2/dc3 are not moved yet.
>
> Boards can be build like this:
> export DEVICE_TREE="avnet-ultra96-rev1"
> make xilinx_zynqmp_virt_defconfig
> make -j
>
> Series depends on patches sent before that's why here is full tree:
> https://github.com/michalsimek/u-boot/tree/20191209-mainline
>
> Thanks,
> Michal
>
>
> Michal Simek (2):
> arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform
> arm64: zynqmp: Use zynqmp_virt platform
>
> configs/avnet_ultra96_rev1_defconfig | 90 --------------
> configs/xilinx_zynqmp_a2197_revA_defconfig | 113 ------------------
> .../xilinx_zynqmp_e_a2197_00_revA_defconfig | 111 -----------------
> .../xilinx_zynqmp_g_a2197_00_revA_defconfig | 111 -----------------
> .../xilinx_zynqmp_m_a2197_01_revA_defconfig | 111 -----------------
> .../xilinx_zynqmp_m_a2197_02_revA_defconfig | 111 -----------------
> .../xilinx_zynqmp_m_a2197_03_revA_defconfig | 111 -----------------
> .../xilinx_zynqmp_p_a2197_00_revA_defconfig | 111 -----------------
> configs/xilinx_zynqmp_virt_defconfig | 28 ++++-
> configs/xilinx_zynqmp_zc1232_revA_defconfig | 50 --------
> configs/xilinx_zynqmp_zc1254_revA_defconfig | 50 --------
> .../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 95 ---------------
> .../xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 68 -----------
> .../xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 61 ----------
> configs/xilinx_zynqmp_zcu100_revC_defconfig | 87 --------------
> configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 112 -----------------
> configs/xilinx_zynqmp_zcu102_revA_defconfig | 112 -----------------
> configs/xilinx_zynqmp_zcu102_revB_defconfig | 111 -----------------
> configs/xilinx_zynqmp_zcu104_revA_defconfig | 92 --------------
> configs/xilinx_zynqmp_zcu104_revC_defconfig | 96 ---------------
> configs/xilinx_zynqmp_zcu106_revA_defconfig | 105 ----------------
> configs/xilinx_zynqmp_zcu111_revA_defconfig | 94 ---------------
> configs/xilinx_zynqmp_zcu1275_revA_defconfig | 50 --------
> configs/xilinx_zynqmp_zcu1275_revB_defconfig | 59 ---------
> configs/xilinx_zynqmp_zcu216_revA_defconfig | 95 ---------------
> 25 files changed, 26 insertions(+), 2208 deletions(-)
> delete mode 100644 configs/avnet_ultra96_rev1_defconfig
> delete mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_e_a2197_00_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_g_a2197_00_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_m_a2197_01_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_m_a2197_02_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_m_a2197_03_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_p_a2197_00_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zc1232_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zc1254_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu100_revC_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu102_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu102_revB_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu104_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu104_revC_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu106_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu111_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu1275_revA_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu1275_revB_defconfig
> delete mode 100644 configs/xilinx_zynqmp_zcu216_revA_defconfig
>
> --
> 2.24.0
>
Applied but with default DT setup because I couldn't find proper setup
to pass CI loop.
Something to take a look later.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-01-16 7:16 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-09 15:19 [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
2019-12-09 15:19 ` [PATCH 1/2] arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform Michal Simek
2019-12-09 15:19 ` [PATCH 2/2] arm64: zynqmp: Use " Michal Simek
2019-12-10 12:40 ` [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs Michal Simek
2019-12-10 13:56 ` Tom Rini
2019-12-10 15:24 ` Michal Simek
2019-12-10 15:30 ` Tom Rini
2019-12-11 13:52 ` Michal Simek
2020-01-16 7:16 ` Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.