From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Osipenko Subject: Re: [PATCH v5 12/19] ASoC: tegra: Add initial parent configuration for audio mclk Date: Sun, 5 Jan 2020 04:05:36 +0300 Message-ID: <0f956c12-98cf-3466-f3ee-ffc3a23e3e3d@gmail.com> References: <1576880825-15010-1-git-send-email-skomatineni@nvidia.com> <1576880825-15010-13-git-send-email-skomatineni@nvidia.com> <20191225175736.GC27497@sirena.org.uk> <856d8a92-0c24-6722-952c-06b86c706e97@gmail.com> <576fca44-6734-5431-b523-512747a0bf12@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Sowjanya Komatineni , Mark Brown Cc: thierry.reding@gmail.com, jonathanh@nvidia.com, lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com, mperttunen@nvidia.com, gregkh@linuxfoundation.org, sboyd@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, pdeschrijver@nvidia.com, pgaikwad@nvidia.com, spujar@nvidia.com, josephl@nvidia.com, daniel.lezcano@linaro.org, mmaddireddy@nvidia.com, markz@nvidia.com, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-tegra@vger.kernel.org 04.01.2020 08:49, Sowjanya Komatineni пишет: > > On 1/2/20 8:12 AM, Dmitry Osipenko wrote: >> 02.01.2020 10:03, Sowjanya Komatineni пишет: >>> On 12/27/19 1:19 PM, Sowjanya Komatineni wrote: >>>> On 12/27/19 6:56 AM, Dmitry Osipenko wrote: >>>>> 25.12.2019 20:57, Mark Brown пишет: >>>>>> On Mon, Dec 23, 2019 at 12:14:34AM +0300, Dmitry Osipenko wrote: >>>>>>> 21.12.2019 01:26, Sowjanya Komatineni пишет: >>>>>>>> Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30 >>>>>>>> through Tegra210 and currently Tegra clock driver does initial parent >>>>>>>> configuration for audio mclk "clk_out_1" and enables them by default. >>>>>> Please delete unneeded context from mails when replying.  Doing this >>>>>> makes it much easier to find your reply in the message, helping ensure >>>>>> it won't be missed by people scrolling through the irrelevant quoted >>>>>> material. >>>>> Ok >>>>> >>>>>>>> -    clk_disable_unprepare(data->clk_cdev1); >>>>>>>> -    clk_disable_unprepare(data->clk_pll_a_out0); >>>>>>>> -    clk_disable_unprepare(data->clk_pll_a); >>>>>>>> +    if (__clk_is_enabled(data->clk_cdev1)) >>>>>>>> +        clk_disable_unprepare(data->clk_cdev1); >>>>>>> The root of the problem is that you removed clocks enabling from >>>>>>> tegra_asoc_utils_init(). >>>> currently, audio mclk and its parent clocks enabling are from clock >>>> driver init and not from tegra_asoc_utils_init. >>>>>>> I'm not sure why clocks should be disabled during the rate-changing, >>>>>>> probably this action is not really needed. >>>>>> I know nothing about this particular device but this is not that >>>>>> unusual a restriction for audio hardware, you often can't >>>>>> robustly reconfigure the clocking for a device while it's active >>>>>> due to issues in the hardware.  You often see issues with FIFOs >>>>>> glitching or state machines getting stuck.  This may not be an >>>>>> issue here but if it's something that's documented as a >>>>>> requirement it's probably good to pay attention. >>>>> I don't know details about that hardware either, maybe it is simply not >>>>> safe to change PLL_A rate dynamically and then CLK_SET_RATE_GATE could >>>>> be used. >>>>> >>>>> If nobody knows for sure, then will be better to keep >>>>> tegra_asoc_utils_set_rate() unchanged. >>>> plla rate change through tegra_asoc_utils_set_rate() happens only when >>>> there is not active playback or record corresponding to this sound >>>> device. >>>> >>>> So, I don't see reason for disabling clock during rate change and not >>>> sure why we had this from the beginning. >>>> >>>> Thierry/Sameer, >>>> >>>> Can you please comment? >>>> >>>> Yes, we can use CLK_SET_RATE_GATE for PLLA and remove clock disabling >>>> before rate change. >>>> >>> PLLA is used for both I2S controller clock and also for audio mclk. I2S >>> driver suspend resume implementations takes care of enabling and >>> disabling I2S clock but audio mclk will be enabled during that time and >>> PLLA disable might not happen. So using CLK_SET_RATE_GATE prevents rate >>> change to happen and as rate change happens only when there is no active >>> audio record/playback, we can perform rate change without disable/enable >>> during rate change. >>> >>> So probably below changes should be good. >>> >>> * remove asoc_utils_set_rate call from asoc_utils_init as set_rate >>> happens during existing hw_params callback implementations in sound >>> drivers and there is no need to do rate change during asoc_utils_init. >>> * remove disable/enable clocks during rate change in asoc_utils_set_rate. >>> * add startup and shutdown snd_soc_ops callbacks to do enable and >>> disable audio mclk. >>> >> Sounds good, thanks. I'll be happy to review and test it. > > Regarding disabling audio mclk during PLLA rate change, no need to > explicitly disable PLLA on asoc utils as clock driver takes care of it > properly during pll rate change. > > But the downstream clock divider hardware can malfunction without > recovery when subject to unstable PLL output during locking, unless > clock is gated. > > So it is recommended to disable downstream clocks during PLL rate change. > > PLLA downstream clocks are I2S and audio mclk (cdev1/clk1 and extern1 > clocks) and I2S clock is disabled in I2S driver by PM runtime ops. The I2S driver uses asynchronous pm_runtime_put() and thus there is no guarantee that I2S clock is disabled at the time of changing PLLA rate. Could this be a problem? > For audio mclk, need to make sure mclk are disabled during rate change. > > So below are the changes to audio clocks that will be in next version. > > * remove tegra_asoc_utils_set_rate call from tegra_asoc_utils_init as > tegra_asoc_utils_set_rate happens during hw_params callback. > * add shutdown snd_soc_ops callbacks to disable of audio mclk. > * remove disable audio mclk (cdev1) and plla clocks prior to rate > change in tegra_asoc_utils_set_rate (as audio mclk will always be in > disabled state every time hw_param callback gets executed) and keep > audio mclk enable after the rate change in tegra_asoc_utils_set_rate. >