Hi

Which gui utility you are using? Are you sure that the other interface has got an ip address from he dhcp server?

Regards
Dharmu

On Fri, 2003-07-18 at 08:57, Sridhar Murthy wrote: 
Hi all,

I require help in configuring firewall on Redhat 8.0 system my setup 
  is as follows:

 We have a Cable Modem connection with sendmail and proxy service 
 running on Linux 8 system with 2 nic cards.

 One nic card is having local LAN ipaddress and the other is taking 
 an ipaddress from the ISP through dhcp protocol.

 The problem i am facing is when i use the gui utility to configure the 
firewall i am not able to see the second nic card(during installation i was 
able to see both the nic cards) which uses the dhcp for an ipaddress

 Can anybody help in configuring a firewall for the this setup.

Regards,

Sridhar

-- 
Regards
Dharmendra.T
dharmu@nsecure.net

This message is intended for the addressee only. It may contain privileged or Confidential information. If you have received this message in error,please notify the sender and destroy the message immediately.Unauthorised use or reproduction of this message is strictly prohibited.